Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Conductivity of Hg{sub 3}In{sub 2}Te{sub 6} crystals in high electric fields

The effect of electric field and temperature on the conductivity of bulk Hg{sub 3}In{sub 2}Te{sub 6} crystals is investigated. It is shown that the I-V characteristics in high electric fields are of the S type with the effect of switching into a low-resistance state. The critical voltage of transition from the Ohm law to the exponential dependence of the current (I) on the voltage (U) and the threshold voltage of transition into the region of negative differential resistance dU/dI = s< 0 linearly depend on the sample thickness. The activation energies of conductivity in low and high electric fields are determined. It is established that the superlinear portion of the I-V characteristic with dU/dI > 0 is described by the dependence of the type I = I{sub 0} exp(U/U{sub 0}) and caused by the electron transitions from the local centers with the energy level E{sub t} = 0.19 eV.

36 MATERIALS SCIENCE↗

Evidence of surface states for AlGaN/GaN/SiC HEMTs passivated Si{sub 3}N{sub 4} by CDLTS

In AlGaN/GaN heterostructure field-effect transistors (HEMTs) structures, the surface defects and dislocations may serve as trapping centers and affect the device performance via leakage current and low frequency noise. This work demonstrates the effect of surface passivation on the current-voltage characteristics and we report results of our investigation of the trapping characteristics of Si{sub 3}N{sub 4}-passivated AlGaN/GaN HEMTs on SiC substrates using the conductance deep levels transient spectroscopy (CDLTS) technique. From the measured of CDLTS we identified one electron trap had an activation energy of 0.31 eV it has been located in the AlGaN layer and two hole-likes traps H{sub 1}, H{sub 2}. It has been pointed out that the two hole-likes traps signals did not originate from changes in hole trap population in the channel, but reflected the changes in the electron population in the surface states of the HEMT access regions.

36 MATERIALS SCIENCE↗

Temperature Dependences of the Threshold Current and Output Power of a Quantum-Cascade Laser Emitting at 3.3 THz

The active region of a THz (terahertz) quantum-cascade laser based on three tunnel-coupled GaAs/Al{sub 0.15}Ga{sub 0.85}As quantum wells with a resonance-phonon depopulation scheme is designed. Energy levels, matrix elements of dipole transitions, and gain spectra are calculated as functions of the applied electric-field strength F and temperature. It is shown that the maximum gain is implemented at a frequency of 3.37 THz and F = 12.3 kV/cm. Based on the proposed design, a quantum-cascade laser emitting at ~3.3 THz with a double metal waveguide and T{sub max} ~ 84 K is fabricated. The activation energy E{sub a} = 23 meV for longitudinal-optical (LO) phonon emission upon the stimulated recombination of hot electrons from the upper laser level to the lower one is determined from the Arrhenius temperature dependence of the output power.

36 MATERIALS SCIENCE↗

Depressing effect of 0.1 wt.% Cr addition into Sn-9Zn solder alloy on the intermetallic growth with Cu substrate during isothermal aging

In this paper, the effect of 0.1 wt.% Cr addition into Sn-9Zn lead-free solder alloys on the growth of intermetallic compound (IMC) with Cu substrate during soldering and subsequent isothermal aging was investigated. During soldering, it was found that 0.1 wt.% Cr addition did not contribute to forming the IMC, which was verified as the same phase structure as the IMC for Sn-9Zn/Cu. However, during solid-state isothermal aging, the IMC growth was remarkably depressed by 0.1 wt.% Cr addition in the Sn-9Zn solder, and this effect tended to be more prominent at higher aging temperature. The activation energy for IMC growth was determined as 21.2 kJ mol{sup -1} and 42.9 kJ mol{sup -1} for Sn-9Zn/Cu and Sn-9Zn-Cr/Cu, respectively. The reduced diffusion coefficient was confirmed for the 0.1Cr-containing solder/Cu. Energy-dispersive X-ray mapping and point analysis also showed ZnCr phase existing in solder matrix, which can reduce diffusion rate of Zn atoms.

36 MATERIALS SCIENCE↗

Electrical and optical properties of Sn doped CuInO{sub 2} thin films: Conducting atomic force microscopy and spectroscopic ellipsometry studies

Tin doped CuInO{sub 2} thin films deposited by rf magnetron sputtering technique show columnar structure with (006) preferred orientation. Conducting atomic force microscopy measurements show the presence of nanoconductivity regions when the current flow direction is along the in-plane InO{sub 6} layer and absence of conducting regions when the current direction is along O-Cu-O layers perpendicular to the film surface. The strong anisotropy observed in the electrical properties of tin doped samples is due to the preferred crystallite orientation and highly anisotropic delafossite structure. A large change in the electrical conductivity value and activation energy value in undoped films and tin doped samples has also been explained in terms of change in crystallite orientation on doping. Spectroscopic ellipsometry measurements have been used to determine the optical constant and dielectric function of CuInO{sub 2} and CuInO{sub 2}:Sn films and show a band gap value of 4.5 eV in tin doped samples due to removal of structural defects.

36 MATERIALS SCIENCE↗

Blood Levels of Zinc in Creole Horses Used in Sera Production

Using Neutron Activation Analysis Zn concentrations were determined in blood of horses (Creole breed). No significant difference was observed between male (0.0029{+-}.0007 gL{sup -1}) and female (0.0031{+-}.0011 gL{sup -1}) animals. These data are an important support to understand the physiological functions of Zn in blood during the process of sera production at Butantan Institute (Sao Paulo, Brazil) using horses.

60 APPLIED LIFE SCIENCES↗

Temperature dependence of the luminescence of calcium-magnesium phosphate Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+}, a blue-emitting material for white light-emitting diodes

Graphical abstract: - Highlights: • Emission spectrum at 20 K confirms that Eu{sup 2+} ions occupy three sites. • Decay curves of three types of Eu{sup 2+} reflect the characteristics of energy transfer. • The Eu(I) emission is thermally quenched at 323 K. • Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} has good thermal stability. • Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} is a promising phosphor for near UV excited white LEDs. - Abstract: A blue-emitting phosphor Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} peaking at 450 nm was synthesized by a solid state reaction. The XRD patterns, luminescence properties, decay curves of samples as well as their thermal quenching and comparing the luminescence properties with that of commercial material were investigated. At 20 K, the emission spectrum exhibiting two distinct bands peaking at 437 and 473 nm with a shoulder peak at 510 nm can be attributed to the overlap of Eu(I), Eu(II) and Eu(III) emission bands. At 423 K the PL intensity decreases to 80% of the value at room temperature, and the emission wavelength shifts toward high energy. The derived activation energy indicates that the lowest energy level of the Eu{sup 2+} 4f{sup 6}5d{sup 1} state is well isolated from the host lattice conduction band. The PL spectra and chromaticity coordinates are close to those of BAM. Ca{sub 3}Mg{sub 3}(PO{sub 4}){sub 4}:Eu{sup 2+} could be a potential candidate for near-UV excited white LEDs.

36 MATERIALS SCIENCE↗

Negative annealing in silicon after the implantation of high-energy sodium ions

The implantation of sodium ions with an energy of 300 keV is carried out into high-resistivity p-Si. The annealing of defects at T{sub ann} = 350–450°C and related activation of atoms (the latter occurs at the “tail” of atom distribution) are described by a first-order reaction. At T{sub ann} = 450–525°C and irrespective of the ion dose, negative annealing is observed; this annealing is accompanied by an appreciable increase in the surface resistance ρ{sub s}. According to estimations, the activation energy of this process amounts to ~2 eV. It is our opinion that the annealing is related to the precipitation of sodium donor atoms, which occurs at a depth exceeding by two–three times the projected range R{sub p} of ions. The annealing of defects at T{sub ann} = 525–700°C, which leads to a further decrease in ρ{sub s}, features an activation energy of ~2.1 eV. The hypothesis that the “tail” in the profiles of sodium atoms measured by secondary-ion mass spectroscopy is due to the diffusion of these atoms from the walls of the crater to its center is verified. It is shown that this process is not implemented since the profiles of sodium atoms measured at room temperature do not differ from those measured at–140°C.

36 MATERIALS SCIENCE↗

Mesoscopic Metal-Insulator Transition at Ferroelastic Domain Walls in VO2

The novel phenomena induced by symmetry breaking at homointerfaces between ferroic variants in ferroelectric and ferroelastic materials have attracted recently much attention. Using variable temperature scanning microwave microscopy, we demonstrate the mesoscopic strain-induced metal-insulator phase transitions in the vicinity of ferroelastic domain walls in the semiconductive VO2 that nucleated at temperatures as much as 10-12 C below bulk transition, resulting in the formation of conductive channels in the material. Density functional theory is used to rationalize the process low activation energy. This behavior, linked to the strain inhomogeneity inherent in ferroelastic materials, can strongly affect interpretation of phase-transition studies in VO2 and similar materials with symmetry-lowering transitions, and can also be used to enable new generations of electronic devices though strain engineering of conductive and semiconductive regions.

36 MATERIALS SCIENCE↗

Glass-Forming Ability, Thermal Stability, and Hardness of Rapidly Solidified Al-Ni-Y-Sc Alloy Ribbons and Rods

The crystallization behaviors and thermal stability of (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 100−x}Sc{sub x} (x = 0, 1.0, 1.5) amorphous ribbons and alloy rods, produced by roller melt-spinning method and inductance casting, were investigated mainly by x-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The glass transition temperatures of the (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 99.0}Sc{sub 1.0} and (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 98.5}Sc{sub 1.5} alloy ribbons were found to be 201 and 197 °C, respectively. Furthermore, the melting temperatures of the alloy ribbons decreased with the Sc content. This revealed that the glass-forming ability (GFA) of the metallic glass increased with increasing Sc content. Crystallization of (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 100−x}Sc{sub x} (x = 0, 1.0, 1.5) amorphous ribbons occurred in the temperature range of 200 to 400 °C in three exothermic reaction stages. The peak temperatures of these three crystallization reactions shifted to higher temperatures at higher heating rates. The kinetic parameters for the first crystallization reaction, determined by Kissinger method, revealed that adding 1.5 at.% Sc increased the activation energy for crystallization from 158 to 167 kJ/mol. On the other hand, the cross-section morphology of the three different alloys revealed that a fully amorphous outer region and a partially crystallized core region formed in each alloy rod. It was also found that the thickness of the amorphous region increased with the Sc content, revealing a positive effect of Sc on the GFA.

36 MATERIALS SCIENCE↗

Microstructural effects on the oxygen exchange kinetics of La{<_0.7}Sr{<_0.3}MnO{<_3} thin films.

We investigated the relative contribution of the native surface and of the grain boundaries intersecting the surface to the chemical surface exchange of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSM) thin films. The chemical surface exchange coefficients, k{sub chem}, were determined using electrical conductivity relaxation (ECR). Two k{sub chem} values were obtained, indicating two surface exchange processes occurred in parallel. These two k{sub chem} values had different activation energies (Ea), which were interpreted as belonging to (1) the native surface response of individual grains/variants and (2) the variant/grain boundaries of the textured films. The first process has an activation energy of E{sub a,1} {approx} 1.57 eV, while E{sub a,2} {approx} 0.87 eV. The k{sub chem,2} values are almost 3 orders of magnitude higher than the k{sub chem,1} values at low temperatures. At higher temperatures, the data can be fit with one k{sub chem} that has an intermediate value of Ea, indicative of a transition region.

36 MATERIALS SCIENCE↗

Kinetics of Transformation of Al{sub 2}O{sub 3} to MgO·Al{sub 2}O{sub 3} Spinel Inclusions in Mg-Containing Steel

During ladle furnace refining, initial Al{sub 2}O{sub 3} inclusions generally transform into MgO·Al{sub 2}O{sub 3} spinel inclusions; these generated spinel inclusions consequently deteriorate the product quality. In this study, the transformation from Al{sub 2}O{sub 3} to MgO·Al{sub 2}O{sub 3} was investigated by immersing an Al{sub 2}O{sub 3} rod into molten steel, which was in equilibrium with both MgO and MgO·Al{sub 2}O{sub 3} spinel-saturated slag. A spinel layer, with a thickness of 4 μm, was generated on the Al{sub 2}O{sub 3} rod surface just 10 s after its immersion at 1873 K (1600 °C). The thickness of the formed spinel layer increased with the immersion period and temperature. Moreover, the MgO content of the generated spinel layer also increased with the immersion period. In this study, the chemical reaction rate at 1873 K (1600 °C) was assumed to be sufficiently high, and only diffusion was considered as a rate-controlling step for this transformation. By evaluating the activation energy, MgO diffusion in the generated spinel layer was found to be the rate-controlling step. In addition, this estimation was confirmed by observing the Mg and Al concentration gradients in the generated spinel layer. The results of this study suggest that the MgO diffusion in the spinel inclusions plays a substantial role with regard to their formation kinetics.

36 MATERIALS SCIENCE↗

Active Learning for Anomaly Detection in Environmental data

Due to the growing amount of data from in-situ sensors in environmental monitoring, it becomes necessary to automatically detect anomalous data points. Nowadays, this is mainly performed using supervised machine learning models, which need a fully labelled data set for their training process. However, the process of labelling data is typically cumbersome and, as a result, a hindrance to the adoption of machine learning methods for automated anomaly detection. In this work, we propose to address this challenge by means of active learning. This method consists of querying the domain expert for the labels of only a selected subset of the full data set. We show that this reduces the time and costs associated to labelling while delivering the same or similar anomaly detection performances. Finally, we also show that machine learning models providing a nonlinear classification boundary are to be recommended for anomaly detection in complex environmental data sets.

54 ENVIRONMENTAL SCIENCES↗

Radiation-induced bistable centers with deep levels in silicon n{sup +}–p structures

The method of deep level transient spectroscopy is used to study electrically active defects in p-type silicon crystals irradiated with MeV electrons and α particles. A new radiation-induced defect with the properties of bistable centers is determined and studied. After keeping the irradiated samples at room temperature for a long time or after their short-time annealing at T ∼ 370 K, this defect does not display any electrical activity in p-type silicon. However, as a result of the subsequent injection of minority charge carriers, this center transforms into the metastable configuration with deep levels located at E{sub V} + 0.45 and E{sub V} + 0.54 eV. The reverse transition to the main configuration occurs in the temperature range of 50–100°C and is characterized by the activation energy ∼1.25 eV and a frequency factor of ∼5 × 10{sup 15} s{sup –1}. The determined defect is thermally stable at temperatures as high as T ∼ 450 K. It is assumed that this defect can either be a complex of an intrinsic interstitial silicon atom with an interstitial carbon atom or a complex consisting of an intrinsic interstitial silicon atom with an interstitial boron atom.

36 MATERIALS SCIENCE↗

Constitutive Behavior and Hot Workability of a Hot Isostatic Pressed Ti-22Al-25Nb Alloy during Hot Compression

A Ti-22Al-25Nb alloy was fabricated from prealloyed powders by hot isostatic pressing for 2 h at a temperature of 1050 °C and pressure of 100 MPa. The hot deformation behavior of the Ti-22Al-25Nb alloy was characterized by isothermal compression testing at deformation temperatures between 900 and 1060 °C and strain rates between 0.001 and 1 s{sup −1}. Based on the true stress–strain curves, a constitutive equation was constructed to describe the flow stress as a function of the strain rate and deformation temperature. Three-dimensional (3D) processing maps were developed based on dynamic material model theory using the stress flow data to identify the instability and optimization regions of the hot processing parameters. The results show that the flow stress decreases with increasing deformation temperature and decreasing strain rate, and the softening mechanisms are different under different deformation conditions. The apparent activation energies in the (α{sub 2} + β/B2 + O) and (α{sub 2} + B2) phase regions are calculated to be 865.177 and 590.661 kJ/mol, respectively, which suggests that the hot isostatic pressed (HIPed) Ti-22Al-25Nb alloy requires a high hot deformation activation energy. Combined with microstructural observations, the optimal processing domains are determined to be a temperature range of 1030-1060 °C and strain rate range of 0.01-0.1 s{sup −1} in the α{sub 2} + B2 phase region. Moreover, the results indicate that adiabatic shear bands and severe inhomogeneous deformation cause flow instability at lower temperatures (900-1005 °C) and higher strain rates (> 0.1 s{sup −1}).

36 MATERIALS SCIENCE↗

Creep behavior of an additively manufactured 9Cr steel in the as-built condition

Limited studies have evaluated the creep behavior of additively manufactured (AM) ferritic-martensitic (FM) steels. This work investigated the creep behavior of a 9Cr FM steel fabricated by powder blown directed energy deposition (DED) technique. Here, the creep testing at 550–650 °C and 150 MPa for the specimens along the deposition direction in the as-built condition, together with corresponding microstructural characterization, revealed a threshold temperature between 600 and 625 °C, below which the steel has creep resistance comparable with Grade 91 cross-welds and noticeably greater than 9Cr-1Mo steel. The threshold temperature distinguishes the creep behavior in two regimes differentiated in creep activation energy, creep deformation, and failure mechanism. Unlike the creep rupture surface ~45° from the loading direction when tested above the threshold temperature, the creep rupture for testing below the threshold temperature resembles type IV failure in the cross-welds of ferritic steels. The DED-induced layer structure in the as-built steel played a significant role on the change of creep behavior.

36 MATERIALS SCIENCE↗

Photoinduced current transient spectroscopy technique applied to the study of point defects in polycrystalline CdS thin films

CdS thin films of variable thickness (between 160 and 1200 nm) were prepared using rf magnetron sputtering. X-ray diffraction measurements showed that the films have hexagonal structure and that the crystallites are preferentially oriented with the <002> axis perpendicular to the substrate surface. The results of electrical conductivity measurements as a function of film thickness and of temperature provide evidence that the conductivity is controlled by a thermally activated mobility in the presence of an intergrain barrier. The room temperature barrier height phi decreases with the increase in film thickness. Values of phi between 0 and 0.25 eV were determined. Photoinduced current transient spectroscopy performed on five samples having different thicknesses showed the presence of 11 traps with activation energies in the range 0.08-1.06 eV; deeper traps being observed on thinner films. By comparison with literature results, seven traps are attributed to native defects and foreign impurities (mainly Cu, Au, and Ag). Four other traps, not previously observed, are attributed to residual defects. The observation that deeper traps are detected in samples with larger barrier heights has been discussed and interpreted in terms of the energy band profile near the grain boundary.

36 MATERIALS SCIENCE↗

Structural, electrical, and thermoelectrical properties of (Bi{sub 1-x}Sb{sub x}){sub 2}Se{sub 3} alloys prepared by a conventional melting technique

Polycrystalline solid solutions of (Bi{sub 1-x}Sb{sub x}){sub 2}Se{sub 3} (x = 0, 0.025, 0.050, 0.075, 0.100) were prepared using a facile method based on the conventional melting technique followed by annealing process. X-ray analysis and Raman spectroscopical measurements revealed formation of Bi{sub 2}Se{sub 3} in single phase. The electrical and thermoelectric properties have been studied on the bulk samples in the temperature range 100-420 K. The electrical conductivity measurements show that the activation energy and room-temperature electrical conductivity dependences on the Sb content respectively exhibit minimum and maximum values at x = 0.05. The thermoelectric power exhibited a maximum value near the room temperature suggesting promising materials for room-temperature applications. The highest power factor value was found to be 13.53 {mu}W K{sup -2} cm{sup -1} and recorded for the x = 0.05 compound.

36 MATERIALS SCIENCE↗