Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulating Winter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Potential impacts of projected warming scenarios on winter wheat in the UK

The goals of this study are to analyse the impacts of 1.5 and 2.0°C scenarios on UK winter wheat using a combination of Global Climate Models (GCMs), crop models, planting dates and cultivars; to evaluate the impact of increased air temperature on winter wheat phenology and potential yield; to quantify the underlying uncertainties due to the multiple sources of variability introduced by climate scenarios, crop models and agronomic management. The data used to calibrate and evaluate three crop models were obtained from a field experiment with two irrigation amounts and two wheat cultivars that have different phenology and growth habit. After calibration, the model was applied to fifty locations across the wheat-growing area of the UK to cover all the main growing regions, with most points located in the main growing areas. Four GCMs, with two cultivars and five planting dates, were simulated at the end of the century. Results of this study showed that the UK potential wheat yield will increase by 2–8% under projected climate. Farmers will need to close such a gap in the future because it will have implications in terms of food security. Future climatic conditions might increase such a gap. Adaptation measures (e.g. moving the optimal planting time), along with climate-ready varieties bred for future conditions and with precision agriculture techniques can help to reduce this gap and ensure that the future actual UK wheat production will be close to the potential.

Climate change↗

AMSR-2 Daily Snow Depth Data Product Using a Neural Network Algorithm Trained by Collocated ICESat-2 Measurements

By using diffusion theory and Monte Carlo lidar radiative transfer simulations, Hu 1 et al. (2022b) has derived snow depth from the first-, second- and third-order moments of the lidar backscattering pathlength distribution. Lu 2 et al. (2022,2024) calculated the snow depth by applying the methods to the satellite ICESat-2 lidar measurements over the Arctic sea ice, as well as land surfaces of Northern Hemisphere. In this paper, a neural network (NN) algorithm, employing several channels from AMSR-2 and the humidity vertical profiles GMAO GEOS-IT, is trained to determine snow depth identified by time and geolocation matched 2019 ICESat-2 snow-depth data during winter months over the Arctic sea ice. The trained NN snow-depth was applied to 2014-2020 AMSR-2 clear pixel data, although the algorithms perform reasonably well in thinner clouds. This paper used AMSR-2 data, a passive microwave instrument to generate a wide range of snow depth data, covering extensive spatial areas in the cross-orbit direction.

Neural Network↗

A three-D circulation model study of the radiative-dynamic coupling within the stratosphere

The role of radiative transfer processes in the general circulation of the stratosphere was studied by comparing the thermal and dynamical structure of the stratosphere as simulated by two controlled numerical experiments performed with the aid of a spectral 3-dimensional quasi-geostrophic circulation model. In the first experiment, a detailed radiative transfer model is employed to treat the longwave radiative transfer in the stratosphere. In the second experiment, longwave radiative transfer is accounted for by employing the Newtonian cooling approximation. It is found that the exchange of longwave radiation between the troposphere and lower stratosphere has a net heating effect on the lower stratosphere. It is shown that this heating effect contributes partly to the maintenance of the warm high-latitude belt in the lower stratosphere during winter and spring seasons. The strong temperature dependence of the Newtonian cooling coefficient plays an important role in determining the zonal temperatures and has a significant influence on the transmissivity of stratosphere to propagating planetary scale waves.

Ramanathan, V.↗

An analysis of Potential Benefits of Adding Diurnal Thermal Storage in Geothermal Heat Pump Systems

Geothermal heat pumps (GHP) are highly efficient for space heating and cooling, utilizing the subsurface of the ground as seasonal energy storage through borehole heat exchangers (i.e., heat stored in summer is used to provide heating in winter, and cold stored in winter is used to provide cooling in summer). On the other hand, diurnal thermal energy storage can actively be charged and discharged for load shifting. Conventional thermal energy storage uses tanks filled with thermal storage media (such as phase change materials) and heat exchangers. It occupies building floor space or land areas outside the building, which may not be available especially in residential buildings. This paper will introduce a novel configuration that can utilize existing GHP system for both diurnal and seasonal thermal storage. This system can actively charge the ground on daily basis by injecting heat or cold in borehole heat exchangers. A simulation model was created for the novel configuration. Computer simulations were conducted using the model for the new GHP system serving a typical single-family house in three U.S. cities representing hot, warm, and cold climates. Based on simulation results, the potential benefits of load shifting and downsize of the expensive ground heat exchangers used by the GHP system were assessed.

Anees, Fady [ORNL]↗

Coastal-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) Science Plan

Understanding the mechanisms governing the urban atmospheric environment is critical for informing urban populations regarding the impacts of climate change and associated mitigation and adaptation measures. Earth system (climate and weather) models have not yet been adapted to provide accurate predictions of climate and weather variability within cities, nor do they provide well-tested representations of the impacts of urban systems on the atmospheric environment. These limitations are largely due to limited field data available for testing and development of these models. We will deploy the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s first Mobile Facility (AMF1) to the mid-Atlantic region surrounding the city of Baltimore for the Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE). This deployment will create a four-node regional atmospheric observatory network including Baltimore and its three primary surrounding environments – rural, urban, and bay. CoURAGE investigators will study the interactions among the Earth’s surface, the atmospheric boundary layer, aerosols and atmospheric composition, clouds, radiation, and precipitation at each site, and examine how the spatial gradients across the region interact to create the climate conditions in Baltimore. This study will determine the degree to which Baltimore’s atmospheric environment depends on interactive feedbacks in the atmospheric system and the degree to which conditions in Baltimore depend on the surrounding environment. Some topics of interest include how urban land management exacerbates heat waves, the impact of regional mesoscale winds (nocturnal jet, bay breeze) on urban air pollution and cloud cover, and the impact of the urban heat island and aerosol production on heavy precipitation events. Understanding this integrated coast-urban-rural system quantitatively and with good accuracy and precision is critical to informing climate adaptation and mitigation efforts in the city of Baltimore. The understanding gained should be applicable to many similar coastal, mid-latitude urban centers. Another important objective of CoURAGE is to improve the representation of the climate of coastal cities in Earth systems models (ESMs). CoURAGE investigators will use the observations to test current ESMs, identify weaknesses and work towards improved simulations of this complex environment. The ARM core facility will be deployed in the city of Baltimore, complementing the Baltimore Social-Environmental Collaborative (BSEC), a DOE urban integrated field laboratory (UIFL). Ancillary sites will be deployed to rural Maryland northwest of Baltimore, and to the southern end of Kent Island within Chesapeake Bay. The fourth node will be a long-term atmospheric observatory operated in Beltsville, Maryland by Howard University and the Maryland Department of the Environment. Measurements will be conducted for one year, starting in December of 2024. There will be two intensive operational periods (IOPs), one in summer and one in winter, when the ancillary sites will be enhanced with additional balloon launches, tethered balloon system (TBS) operation, and added atmospheric composition measurements.

54 ENVIRONMENTAL SCIENCES↗

Millimeter wave radiative transfer studies for precipitation measurements

Scattering calculations using the discrete dipole approximation and vector radiative transfer calculations were performed to model multiparameter radar return and passive microwave emission for a simple model of a winter storm. The issue of dendrite riming was addressed by computing scattering properties of thin ice disks with varying bulk density. It was shown that C-band multiparameter radar contains information about particle density and the number concentration of the ice particles. The radiative transfer modeling indicated that polarized multifrequency passive microwave emission may be used to infer some properties of ice hydrometers. Detailed radar modeling and vector radiative transfer modeling is in progress to enhance the understanding of simultaneous radar and radiometer measurements, as in the case of the proposed TRMM field program. A one-dimensional cloud model will be used to simulate the storm structure in detail and study the microphysics, such as size and density. Multifrequency polarized radiometer measurements from the SSMI satellite instrument will be analyzed in relation to dual-frequency and dual-polarization radar measurements.

Vivekanandan, J.↗

Assimilation of GPM-retrieved Ocean Surface Meteorology Data for Two Snowstorm Events during ICE-POP 2018

As a component of the National Aeronautics and Space Administration (NASA) Weather Focus Area and Global Precipitation Measurement (GPM) Ground Validation participation in the International Collaborative Experiments for PyeongChang 2018 Olympic and Paralympic Winter Games (ICE-POP 2018) field research and forecast demonstration programs, hourly ocean surface meteorology properties were retrieved from the GPM microwave observations for January – March 2018. In this study, the retrieved ocean surface meteorological products – 2-m temperature, 2-m specific humidity, and 10-m wind speed were assimilated into a regional numerical weather prediction (NWP) framework to explore the application of these observations for two heavy snowfall events during the ICE-POP 2018: 27-28 February, and 7-8 March 2018. The Weather Research and Forecasting (WRF) model and the community Gridpoint Statistical Interpolation (GSI) were used to conduct high resolution simulations and data assimilation experiments. The results indicate that the data assimilation has a large influence on surface thermodynamic and wind fields in the model initial condition for both events. With cycled data assimilation, significantly positive influence of the retrieved surface observation was found for the March case with improved quantitative precipitation forecast and reduced error in temperature forecast. A slightly smaller yet positive impact was also found in the forecast of the February case.

assimilation↗

Obliquity Experiments with a Mars General Circulation Model

We have simulated the seasonal variation of the general circulation on Mars for obliquities of 0deg and 60deg. These obliquities represent the minimum and maximum values the planet has experienced during the past 10(exp 7) years (e.g., Laskar and Robutel, 1993, Nature, 361, 608-614). The model we use is the NASA/Ames Mars General Circulation Model (Pollack et al., 1993, J. Geophys. Res. 98, 3149-3181). We vary only the obliquity; all other model parameters are as in Pollack et al. At high obliquity, the model shows dramatic seasonal variations in the polar caps and in the structure and intensity of the circulation. At the solstices the winter cap extends to the equator. Thus, surface temperatures throughout the entire winter hemisphere are fixed at the CO2 frost point. During summer surface temperatures at the poles reach 269K in the north and 295K in the south. The most notable changes to the circulation at solstice compared to our standard runs are a general weakening of the winter westerlies, a Hadley cell of greater latitudinal extent, and the development of very strong, possibly unstable, low-level jets in midlatitudes of the summer hemisphere. Surface stresses associated with these jets are sufficient to raise dust continuously. Thus, dust storms should be frequent features of the high obliquity climate. This result is independent of any desorbed regolith CO2 which would raise mean surface pressures. At zero obliquity the structure of the circulation resembles that of present day equinox conditions modulated by the varying insolation associated with orbital eccentricity. Notable features include equatorial superrotation, asymmetric Hadley cells, and stronger poleward heat fluxes in the northern hemisphere. Since the poles do not receive solar energy at any time of year, permanent caps form which extend to about 70deg in each hemisphere. However, the north permanent cap is growing at a rate 40% faster than the south cap. This is due to the differences in topography, albedo, emissivity, and heat transport in each hemisphere. Thus the zero obliquity climate system appears to be evolving toward a state in which the north cap is the dominant cap.

Harberle, R. M.↗

Lighting Condition Analysis for Mars Moon Phobos

A manned mission to Phobos may be an important precursor and catalyst for the human exploration of Mars, as it will fully demonstrate the technologies for a successful Mars mission. A comprehensive understanding of Phobos' environment such as lighting condition and gravitational acceleration are essential to the mission success. The lighting condition is one of many critical factors for landing zone selection, vehicle power subsystem design, and surface mobility vehicle path planning. Due to the orbital characteristic of Phobos, the lighting condition will change dramatically from one Martian season to another. This study uses high fidelity computer simulation to investigate the lighting conditions, specifically the solar radiation flux over the surface, on Phobos. Ephemeris data from the Jet Propulsion Laboratory (JPL) DE405 model was used to model the state of the Sun, the Earth, and Mars. An occultation model was developed to simulate Phobos' self-shadowing and its solar eclipses by Mars. The propagated Phobos' state was compared with data from JPL's Horizon system to ensure the accuracy of the result. Results for Phobos lighting condition over one Martian year are presented in this paper, which include length of solar eclipse, average solar radiation intensity, surface exposure time, total maximum solar energy, and total surface solar energy (constrained by incident angle). The results show that Phobos' solar eclipse time changes throughout the Martian year with the maximum eclipse time occurring during the Martian spring and fall equinox and no solar eclipse during the Martian summer and winter solstice. Solar radiation intensity is close to minimum at the summer solstice and close to maximum at the winter solstice. Total surface exposure time is longer near the north pole and around the anti- Mars point. Total maximum solar energy is larger around the anti-Mars point. Total surface solar energy is higher around the anti-Mars point near the equator. The results from this study and others like it will be important in determining landing site selection, vehicle system design and mission operations for the human exploration of Phobos and subsequently Mars.

Li, Zu Qun↗

Evaluation of Model Microphysics Within Precipitation Bands of Extratropical Cyclones

Recent studies evaluating the bulk microphysical schemes (BMPs) within cloud resolving models (CRMs) have indicated large uncertainties and errors in the amount and size distributions of snow and cloud ice aloft. The snow prediction is sensitive to the snow densities, habits, and degree of riming within the BMPs. Improving these BMPs is a crucial step toward improving both weather forecasting and climate predictions. Several microphysical schemes in the Weather Research and Forecasting (WRF) model down to 1.33‐km grid spacing are evaluated using aircraft, radar, and ground in situ data from the Global Precipitation Mission Coldseason Precipitation Experiment (GCPEx) experiment, as well as a few years (15 winter storms) of surface measurements of riming, crystal habit, snow density, and radar measurements at Stony Brook, NY (SBNY on north shore of Long Island) during the 2009-2012 winter seasons. Surface microphysical measurements at SBNY were taken every 15 to 30 minutes using a stereo microscope and camera, and snow depth and snow density were also recorded. During these storms, a vertically-pointing Ku-band radar was used to observe the vertical evolution of reflectivity and Doppler vertical velocities. A Particle Size and Velocity (PARSIVEL) disdrometer was also used to measure the surface size distribution and fall speeds of snow at SBNY. For the 15 cases at SBNY, the WSM6, Morrison (MORR), Thompson (THOM2), and Stony Brook (SBU-YLIN) BMPs were validated. A non-spherical snow assumption (THOM2 and SBU-YLIN) simulated a more realistic distribution of reflectivity than spherical snow assumptions in the WSM6 and MORR schemes. The MORR, WSM6, and SBU-YLIN schemes are comparable to the observed velocity distribution in light and moderate riming periods. The THOM2 is ~0.25 meters per second too slow with its velocity distribution in these periods. In heavier riming, the vertical Doppler velocities in the WSM6, THOM2, and MORR schemes were ~0.25 meters per second too slow, while the SBU-YLIN was 0.25 to 0.5 meters per second too fast. Overall, the BMPs simulate a size distribution close to the observed for D < 4 mm in the dendritic, plates, and mixed habit periods. The model BMPs underestimate the size distribution when large aggregates were observed. For D > 6 mm in the dendrites, side planes, and mixed habit periods, the BMPs are likely not simulating enough aggregation to create a larger size distribution, although the MORR (double moment) scheme seemed to perform best. These SBNY results will be compared with some results from GCPEx for a warm frontal snow band observed at 18 February 2012.

Colle, Brian A.↗

Evaluation of Model Microphysics within Precipitation Bands of Extratropical Cyclones

Recent studies evaluating the bulk microphysical schemes (BMPs) within cloud resolving models (CRMs) have indicated large uncertainties and errors in the amount and size distributions of snow and cloud ice aloft. The snow prediction is sensitive to the snow densities, habits, and degree of riming within the BMPs. Improving these BMPs is a crucial step toward improving both weather forecasting and climate predictions. Several microphysical schemes in the Weather Research and Forecasting (WRF) model down to 1.33‐km grid spacing are evaluated using aircraft, radar, and ground in situ data from the Global Precipitation Mission Coldseason Precipitation Experiment (GCPEx) experiment, as well as a few years (15 winter storms) of surface measurements of riming, crystal habit, snow density, and radar measurements at Stony Brook, NY (SBNY on north shore of Long Island) during the 2009-2012 winter seasons. Surface microphysical measurements at SBNY were taken every 15 to 30 minutes using a stereo microscope and camera, and snow depth and snow density were also recorded. During these storms, a vertically-pointing Ku-band radar was used to observe the vertical evolution of reflectivity and Doppler vertical velocities. A Particle Size and Velocity (PARSIVEL) disdrometer was also used to measure the surface size distribution and fall speeds of snow at SBNY. For the 15 cases at SBNY, the WSM6, Morrison (MORR), Thompson (THOM2), and Stony Brook (SBU-YLIN) BMPs were validated. A non-spherical snow assumption (THOM2 and SBU-YLIN) simulated a more realistic distribution of reflectivity than spherical snow assumptions in the WSM6 and MORR schemes. The MORR, WSM6, and SBU-YLIN schemes are comparable to the observed velocity distribution in light and moderate riming periods. The THOM2 is approx 0.25 m/s too slow with its velocity distribution in these periods. In heavier riming, the vertical Doppler velocities in the WSM6, THOM2, and MORR schemes were approx 0.25 m/s too slow, while the SBU-YLIN was 0.25 to 0.5 m/s too fast. Overall, the BMPs simulate a size distribution close to the observed for D < 4 mm in the dendritic, plates, and mixed habit periods. The model BMPs underestimate the size distribution when large aggregates were observed. For D > 6 mm in the dendrites, side planes, and mixed habit periods, the BMPs are likely not simulating enough aggregation to create a larger size distribution, although the MORR (double moment) scheme seemed to perform best. These SBNY results will be compared with some results from GCPEx for a warm frontal snow band observed at 18 February 2012.

Colle, Brian A.↗

Increases in Future AR Count and Size: Overview of 2 the ARTMIP Tier 2 CMIP5/6 Experiment

The Atmospheric River (AR) Tracking Method Intercomparison Project (ARTMIP) is a community effort to systematically assess how the uncertainties from AR detectors (ARDTs) impact our scientific understanding of ARs. This study describes the ARTMIP Tier 2 experimental design and initial results using the Coupled Model Intercomparison Project (CMIP) Phases 5 and 6 multi-model ensembles. We show that AR statistics from a given ARDT in CMIP5/6 historical simulations compare remarkably well with the MERRA-2 reanalysis. In CMIP5/6 future simulations, most ARDTs project a global increase in AR frequency, counts, and sizes, especially along the western coastlines of the Pacific and Atlantic oceans. We find that the choice of ARDT is the dominant contributor to the uncertainty in projected AR frequency when compared with model choice. These results imply that new projects investigating future changes in ARs should explicitly consider ARDT uncertainty as a core part of the experimental design. Plain Language Summary: Atmospheric rivers (ARs) are a type of weather pattern known to be important for moving water vapor from the warm, moist tropics to the cool, dry polar regions; when they reach midlatitudes in the winter time, they are commonly associated with heavy precipitation. Recent studies that assess the impacts of global climate change on ARs tend to agree that there will be more ARs in a warmer climate, and that ARs will tend to be more extreme. However, it has been increasingly recognized by the AR research community that these results may depend on the method used to identify ARs and the choice of climate model. This study reports results from a controlled experiment, involving an international research community, that aims to show how different AR identification methods and climate models might impact our scientific understanding of ARs in the future. This experiment shows that there will likely be more ARs in the future, and that ARs will generally have a larger spatial footprint. This experiment also shows that uncertainty in these results are large, with the uncertainty from AR identification methods outweighing that of climate models. Future efforts to better understand the physics of ARs may help us reduce this uncertainty.

T A OBrien↗

Comparison of measured and calculated low latitude ionospheric properties

Measurements of ionospheric parameters above Arecibo, Puerto Rico, have been compared with a computer simulation for a variety of conditions. Agreement was found between the measured and calculated electron concentration during geomagnetically quiet conditions. Comparisons for more active conditions indicate a significant upward flow of ionization during the mid-afternoon. Calculated electron temperatures were found to be consistently lower than measured temperatures during the daytime. Calculated values of NmF2 and h(max) agreed with measured results except during the post-midnight period. Calculated values of the ion flux indicate a 24-hour net flow of ionization from the northern to the Southern Hemisphere amounting to 12 percent and 6 percent of the equilibrium flux tube content above 1000 km for the winter solstice and equinox cases, respectively.

Chandler, M. O.↗

Availability Estimation for Facilities in Extreme Geographical Locations

A value added analysis for the Reliability. Availability and Maintainability of McMurdo Ground Station was developed, which will be a useful tool for system managers in sparing, maintenance planning and determining vital performance metrics needed for readiness assessment of the upgrades to the McMurdo System. Output of this study can also be used as inputs and recommendations for the application of Reliability Centered Maintenance (RCM) for the system. ReliaSoft's BlockSim. a commercial Reliability Analysis software package, has been used to model the availability of the system upgrade to the National Aeronautics and Space Administration (NASA) Near Earth Network (NEN) Ground Station at McMurdo Station in the Antarctica. The logistics challenges due to the closure of access to McMurdo Station during the Antarctic winter was modeled using a weighted composite of four Weibull distributions. one of the possible choices for statistical distributions throughout the software program and usually used to account for failure rates of components supplied by different manufacturers. The inaccessibility of the antenna site on a hill outside McMurdo Station throughout one year due to severe weather was modeled with a Weibull distribution for the repair crew availability. The Weibull distribution is based on an analysis of the available weather data for the antenna site for 2007 in combination with the rules for travel restrictions due to severe weather imposed by the administrating agency, the National Science Foundation (NSF). The simulations resulted in an upper bound for the system availability and allowed for identification of components that would improve availability based on a higher on-site spare count than initially planned.

Fischer, Gerd M.↗

Winds at the Mars 2020 Landing Site: 1. Near-Surface Wind Patterns at Jezero Crater

This is the first part of a two-part paper. NASA's Mars 2020 Perseverance rover measured winds on the Jezero crater floor close to the delta of an ancient river. A mostly repeatable diurnal cycle was observed and presented two regimes: (a) a convective regime, from dawn to sunset, with average easterly to southeasterly winds, during which maximum wind speeds were measured, and (b) a nighttime regime with westerly-northwesterly winds followed by a relatively calm period with highly variable wind directions as a function of sol and time of night. The timing and magnitude of the observed regimes are consistent with primary control by regional and local slope flows. Data suggest that the surface circulation at Jezero region in northern spring and summer is highly unaffected by large-scale circulation except during particular periods in the diurnal cycle or generally during dust storms, which is supported by MarsWRF model simulations. Consequently, the observed seasonal variability was weak. However, sol-to-sol and seasonal variability were measured, most of it during certain nighttime periods. Traveling waves consistent with baroclinic instability were clearly observed in surface winds at L_s ∼ 75°. The early MY36/2022A regional dust storm at L_s ∼ 153° disturbed the wind patterns with changes suggesting enhanced tidal flows. After sunset, the dust storm also produced detectable gravity wave activity, increasing the mixing in the nighttime planetary boundary layer during storm conditions. Inferred wind directions from dust devil movies strongly suggest that prevailing winds continued to be slope-driven during the late summer, fall and early winter seasons.

D. Viúdez-Moreiras↗

Structure and mechanical properties of grain boundaries in molybdenum disulfide (MoS 2 )

Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.

Moore, Robert D. [Lehigh Univ., Bethlehem, PA (Uni↗

Mesoscale Organization in Cumulus-Coupled Stratocumulus

Marine cloud systems cover a substantial portion of the world’s oceans. Most of these clouds form relatively close to the ocean surface, typically within one to two kilometers, a region referred to by meteorologists as the marine boundary layer. They are composed predominantly of liquid water, although ice particles can occur in mid- and high-latitude marine clouds during winter. In satellite imagery, these clouds appear bright against the darker ocean surface below, reflecting a large fraction of incoming sunlight back into space that would otherwise warm the ocean. Because marine boundary layer clouds cover such an extensive area of the ocean, they exert a significant influence on Earth’s overall transfer of solar energy absorbed by the surface and thermal energy emitted to space, a balance known as the planetary radiation budget. Marine boundary layer clouds are typically thin, and their formation and dissipation depend on a delicate balance between processes acting at the ocean surface below and the warm, dry air above. They are notoriously difficult to simulate accurately in weather forecast models, which often produce too few marine low clouds in midlatitudes and clouds in tropical regions that are excessively bright, meaning they reflect too much solar radiation. The marine boundary layer is frequently characterized by widespread overcast cloud cover that often transitions from a continuous, single-layer deck to more broken cloud fields toward the tropics. These transitions typically proceed through an intermediate stage in which shallow, broken clouds form beneath the overlying stratiform cloud deck. Once broken clouds develop below the overcast, they frequently self-organize into cloud clusters known as marine boundary layer convective complexes (MBLCCs), although the mechanisms governing the formation and organization of MBLCCs remain poorly understood. Accurately representing these transitions in long-range weather forecast models is essential because they influence the properties of air masses advected over the continental United States and Europe, and they become increasingly important for forecasts on seasonal and longer timescales. We employed two complementary approaches to investigate the processes controlling MBLCCs and their impact on marine cloud cover. Long-term observations from the U.S. Department of Energy’s Eastern North Atlantic (ENA) Observatory provided a unique dataset that allowed us to characterize fundamental properties of MBLCCs, including their typical size and frequency of occurrence. These observations were combined with high-resolution numerical simulations performed on supercomputers to examine the evolution of MBLCCs during cold-air outbreaks over the ENA region.

54 ENVIRONMENTAL SCIENCES↗

Influence of solar heating and precipitation scavenging on the simulated lifetime of post-nuclear war smoke

The behavior of smoke injected into the atmosphere by massive fires that might follow a nuclear war was simulated. Studies with a three-dimensional global atmospheric circulation model showed that heating of the smoke by sunlight would be important and might produce several effects that would decrease the efficiency with which precipitation removes smoke from the atmosphere. The heating gives rise to vertical motions that carry smoke well above the original injection height. Heating of the smoke also causes the tropopause, which is initially above the smoke, to reform below the heated smoke layer. Smoke above the tropopause is physically isolated from precipitation below. Consequently, the atmospheric residence time of the remaining smoke is greatly increased over the prescribed residence times used in previous models of nuclear winter.

Malone, R. C.↗