Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Analysis of the Impact of Installation Parameters and System Size on Bifacial Gain and Energy Yield of PV Systems

In this work, we present the combined effect of installation parameters (tilt angle, height above ground, and albedo) on the bifacial gain and energy yield of three photovoltaic (PV) system configurations: a single module, a row of five modules, and five rows of five modules utilizing RADIANCE based ray tracing model. We show that optimum tilt angle is dependent on parameters such as height, albedo, size of the system, and time of the year. For a single bifacial module installed in Albuquerque, NM, the optimum tilt angle is lowest (~5 degree) for summer solstice and highest (~65 degree) for winter solstice. For larger systems, optimum tilt angle can be up to 200 more than that for a single module system. We also show that modules in large scale systems, generate lower energy due to large shadowing areas cast by the modules on the ground. For albedo of 21 %, middle module in a large array generates up to 7% less energy than a single bifacial module. To validate our model, we utilize measured data from Sandia's fixed tilt bifacial PV testbed and compare it with our simulations. We find that due to higher non-uniformity, lower tilt angles demonstrate high normalized root mean square deviation (NRMSD) between measured and simulated values than high tilt angles.

14 SOLAR ENERGY↗
DOE OSTI2019

Natural Selection Footprints Among African Chicken Breeds and Village Ecotypes

Natural selection is likely a major factor in shaping genomic variation of the African indigenous rural chicken, driving the development of genetic footprints. Selection footprints are expected to be associated with adaptation to locally prevailing environmental stressors, which may include diverse factors as high altitude, disease resistance, poor nutrition, oxidative and heat stresses. To determine the existence of a selection footprint, 268 birds were randomly sampled from three indigenous ecotypes from East Africa (Rwanda and Uganda) and North Africa (Baladi), and two registered Egyptian breeds (Dandarawi and Fayoumi). Samples were genotyped using the chicken Affymetrix 600K Axiom R Array. A total of 494,332 SNPs were utilized in the downstream analysis after implementing quality control measures. The intra-population runs of homozygosity (ROH) that occurred in >50% of individuals of an ecotype or in >75% of a breed were studied. To identify inter-population differentiation due to genetic structure, FST was calculated for North- vs. East-African populations and Baladi and Fayoumi vs. Dandarawi for overlapping windows (500 kb with a step-size of 250 kb). The ROH and FST mapping detected several selective sweeps on different autosomes. Results reflected selection footprints of the environmental stresses, breed behavior, and management. Intra-population ROH of the Egyptian chickens showed selection footprints bearing genes for adaptation to heat, solar radiation, ion transport and immunity. The high-altitude-adapted East-African populations’ ROH showed a selection signature with genes for angiogenesis, oxygen-heme binding and transport. The neuroglobin gene (GO:0019825 and GO:0015671) was detected on a Chromosome 5 ROH of Rwanda–Uganda ecotypes. The sodium-dependent noradrenaline transporter, SLC6A2 on a Chromosome 11 ROH in Fayoumi breed may reflect its active behavior. Inter-population FST among Egyptian populations reflected genetic mechanisms for the Fayoumi resistance to Newcastle Disease Virus (NDV), while FST between Egyptian and Rwanda–Uganda populations indicated the Secreted frizzled related protein 2, SFRP2, on Chromosome 4, that contributes to melanogenic activity and most likely enhances the Dandarawi chicken adaptation to high-intensity of solar radiation in Southern Egypt. These results enhance our understanding of the natural selection forces role in shaping genomic structure for adaptation to the stressful African conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Enhancing Mo:BiVO 4 Solar Water Splitting with Patterned Au Nanospheres by Plasmon-Induced Energy Transfer [Rational Nanopositioning for BiVO 4 Solar Water Splitting by Plasmon-induced Energy Transfer]

Here, plasmonic metal nanostructures have been extensively investigated to improve the performance of metal oxide photoanodes for photoelectrochemical (PEC) solar water splitting cells. Most of these studies have focused on the effects of those metal nanostructures on enhancing light absorption and enabling direct energy transfer via hot electrons. However, several recent studies have shown that plasmonic metal nanostructures can improve the PEC performance of metal oxide photoanodes via another mechanism known as plasmon–induced resonant energy transfer (PIRET). However, this PIRET effect has not yet been tested for the molybdenum–doped bismuth vanadium oxide (Mo:BiVO 4 ), regarded as one of the best metal oxide photoanode candidates. Here, this study constructs a hybrid Au nanosphere/Mo:BiVO 4 photoanode interwoven in a hexagonal pattern to investigate the PIRET effect on the PEC performance of Mo:BiVO 4 . This study finds that the Au nanosphere array not only increases light absorption of the photoanode as expected, but also improves both its charge transport and charge transfer efficiencies via PIRET, as confirmed by time–correlated single photon counting and transient absorption studies. As a result, incorporating the Au nanosphere array increases the photocurrent density of Mo:BiVO 4 at 1.23 V versus RHE by ≈2.2–fold (2.83 mA cm –2 ).

36 MATERIALS SCIENCE↗
DOE OSTI2020

A VIPA Spectrograph with Ultra-high Resolution and Wavelength Calibration for Astronomical Applications

A prototype spectrograph using a Virtually Imaged Phased Array (VIPA) as the main dispersion element is presented, and its performance is fully examined in our laboratory. The single-mode, fiber-fed spectrograph with simultaneous wavelength calibration possesses a spectral resolution well in excess of R≈1.12×10{sup 6} while the size of the VIPA is several orders of magnitude smaller than that of a conventional échelle with comparable resolution. In laboratory tests, the VIPA-based instrument with a homemade Yb:fiber ring laser frequency comb demonstrates a mode-to-mode tracking stability of 41 cm s{sup −1} over a period of 6 hr. The VIPA spectrograph has promising applications in various astronomical observations in which ultra-high resolution and calibration precision are imperative, such as solar physics research, exoplanet searching with the radial velocity method, and O{sub 2} detection in the atmosphere of Earth-like planets. Ultimately, feasible optimizations for night-sky observations under seeing limited conditions are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

PV Performance Modeling - Data and Resources

The Photovoltaic (PV) Performance Modeling Collaborative (PVPMC) organized a blind PV performance modeling intercomparison to allow PV modelers to blindly test their models and modeling ability against real system data. Measured weather and irradiance data were provided along with detailed descriptions of PV systems from two locations (Albuquerque, New Mexico, USA and Roskilde, Denmark). Participants were asked to simulate the plane-of-array irradiance, module temperature, and DC power output from six systems and submit their results to Sandia for processing. This dataset includes seven MS-Excel sheets with instructions, notes and all necessary data (weather, irradiance, temperature, power) used for the data analysis of the blind modeling comparison. The hourly data represent six different systems from Albuquerque, NM and Roskilde, Denmark over a period of one year. These data are useful for PV performance model validation studies.

14 SOLAR ENERGY↗
DOE OSTI2015

Annual Continuation And Progress Report For Low-Energy Nuclear Physics Research At Lawrence Livermore National Laboratory

(I)In this project, the Beta-­decay Paul Trap, an open-­geometry RFQ ion trap that can be instrumented with sophisticated radiation detection arrays, is used for precision β-­decay studies. Measurements of β-­decay angular correlations, which are sensitive to exotic particles and other phenomena beyond the Standard Model (SM) of particle physics that may occur at the TeV-­energy scale, are being performed by taking advantage of the favorable properties of the mirror 8 Li and 8 B β ± decays and the benefits afforded by using trapped ions. By detecting the β and two α particles emitted in these decays, the complete kinematics can be reconstructed. This allows a simultaneous measurement of the β-­n, β-­n-­α, and β-α correlations and a determination of the neutrino energy and momentum event by event. In addition, the 8 B neutrino spectrum, of great interest in solar neutrino oscillation studies, can be determined in a new way. Beta-­delayed neutron spectroscopy is also being performed on neutron-­rich isotopes by studying the β-­decay recoil ions that emerge from the trap with high efficiency, good energy resolution, and practically no backgrounds. This novel technique is being used to study isotopes of mass-­number A~130 in the vicinity of the N=82 neutron magic number to help understand the rapid neutron-­capture process (r-­process) that creates many of the heavy isotopes observed in the cosmos. (II)A year-long CHICO2 campaign at ANL/ATLAS together with GRETINA included a total of 10 experiments, seven with the radioactive beams from CARIBU and three with stable beams, with 82 researchers involved from 27 institutions worldwide. CHICO2 performed flawlessly during this long campaign with achieved position resolution matching to that of GRETINA, which greatly enhances the sensitivity in the study of nuclear γ-­ray spectroscopy. This can be demonstrated in our results on 144 Ba and 146 Ba where the octupole deformation is evident from the measured B(E3; 3 - →0 + ) strengths that significantly greater than the theoretical predictions. We anticipate that CHICO2 will continue to be a viable charged-­particle detector for the research need of the low-­energy nuclear physics community.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Editorial: Microbial C1 Metabolism and Biotechnology

Archaea and bacteria with the capacity to utilize one-carbon (C1) molecules as carbon and energy sources are widespread across the planet and are important players in many biogeochemical processes. As such, they occupy an array of diverse anaerobic and aerobic niches and perform unique metabolisms that enable the utilization of carbon dioxide (CO 2 ), carbon monoxide (CO), formate (HCOOH), methanol (CH 3 OH), and methane (CH 4 ) for growth. Several industrial processes have been developed that leverage these microbes for the targeted conversion of anthropogenic waste gases that contain C1 molecules, including natural gas (CH 4 ), anaerobic digestion-derived biogas (CH 4 and CO 2 ), industrial flue gas (CO 2 and CO), and syngas (CO 2 , CO, and H 2 ) (Figure 1). Further, there is increasing interest in electrochemical reduction of CO 2 to CO, CH 4 , and intermediates with increased solubility compared to gaseous C1 molecules (formate and methanol) using electrons derived from renewable sources like wind, solar, or hydrothermal systems to mitigate atmospheric greenhouse gas. Thus, C1-utilizing microbes will likely play an integral role in biotechnologies that are part of a sustainable, circular bioeconomy. However, fundamental knowledge gaps into the metabolism and physiology of these microbes exist that limit their utility as biocatalysts for carbon-efficient biomanufacturing. This special topic presents studies focused on the fundamental aspects of C1 metabolism in diverse microbial systems with the ability to convert anthropogenic greenhouse gases into valuable products.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Measuring Irradiance for Bifacial PV Systems

The advent of bifacial PV systems drives new requirements for irradiance measurement at PV projects for monitoring and assessment purposes. While there are several approaches, there is still no uniform guidance for what irradiance parameters to measure and for the optimal selection and placement of irradiance sensors at bifacial arrays. Standards are emerging to address these topics but are not yet available. In this paper we review approaches to bifacial irradiance monitoring which are being discussed in the research literature and pursued in early systems, to provide a preliminary guide and framework for developers planning bifacial projects.

bifacial↗
DOE OSTI2017

Comparison of Pyranometers and Reference Cells on Fixed and One-axis Tracking Surfaces

Photovoltaic (PV) system perfomance is monitored by a wide variety of sensors. These instruments range from secondary standard pyranometers to photodiode-based pyranometers to reference cells. Although instruments are mounted in the plane of array of the modules a wide range of results have been obtained. Some of these difference have been assumed to come from systematic uncertainties associated with the irradiance sensors. This study is an attempt to quantify these differences by comparing the output of selected thermopile-based pyranometers to photodiode-based pyranometers and reference cells on a horizontal surface, a fixed-tilt surface, and a one-axis tracking surface. This analysis focuses on clear-sky results from two sites with different climatic conditions. Several important features were observed. Photodiode-based pyranometers and reference cells produce widely different results under clear skies, especially at larger angles-of-incidence even though both instruments are based on measuring the short circuit current of solar cells. The difference is caused by the scattering of light as it passes through the glazing of the reference cell or the diffuser lens of the photodioded- base pyranometer. Both instruments are shown to have similar response to the spectral distribution of the irradiance when compared to the thermopile-based pyranometer that has a response nearly independent of the wavelength of light used by PV modules.

14 SOLAR ENERGY↗
DOE OSTI2018

A Conservative Approach to Defining Photovoltaic System Hazards to Firefighters

Sandia National Laboratories performed analysis to develop conservative hazard guidelines regarding firefighters working near photovoltaic (PV) arrays. Assuming implementation of NFPA 70 system shutdown requirements, the analysis focused on DC hazards only. Several different PV variables were considered, including system grounding and DC voltage classes. The hazard scenarios considered the contact conditions, current paths through the body, and PPE. Guidelines for the hazard definitions for men and women were based on the IEC TS 60479-1 guidelines. The importance of PPE was illustrated in the results.

14 SOLAR ENERGY↗
DOE OSTI2019

Imaging Lateral Drift Kinetics to Understand Causes of Outdoor Degradation in Silicon Heterojunction Photovoltaic Modules

Lateral drift currents caused by partial or patterned illumination of photovoltaic cells have important implications for laser-based screening methods and luminescence imaging of fielded and lab-stressed modules. This study investigates the kinetics of carrier drift and bulk recombination following patterned illumination in commercial silicon heterojunctions with intrinsic thin layer (HIT) modules, comparing the kinetics between a ten-year field-weathered module versus a control module that is stored indoors. The measurement of the microwave photoconductance decay (uPCD) transients in the modules, both coincident with the photoexcitation and in nonilluminated cell regions, reveals carrier drift on the 100 us timescale, followed by millisecond bulk lifetimes. Importantly, the uPCD transients are consistent with luminescence spreading over the cell, which is imaged using a time-gated InGaAs array camera. The weathered HIT module shows slower lateral drift and faster bulk lifetimes compared with the control, suggesting increased series resistance and accelerated nonradiative recombination in this module, attributable to degradation of the transparent conductive oxide and degradation of the passivation layer, respectively. These results provide a novel example of using time-resolved measurements directly on full photovoltaic modules to reveal causes of degradation, providing insight for further development of module imaging and screening capabilities.

14 SOLAR ENERGY↗
DOE OSTI2021

Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics

The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.

36 MATERIALS SCIENCE↗
DOE OSTI2015

AlGaAs converters and arrays for laser power beaming

This study reports on the development of AlGaAs/GaAs-based laser power photovoltaic (PV) converters fabricated by LPE. The monochromatic (λ = 809 nm) conversion efficiency up to 58% is measured for cells with p-n junction in Al{sub 0.07}Ga{sub 0.93}As and low (x = 0.25-0.3) Al concentration ‘window’. Modules, which have converters of low and high power laser radiation and the voltage of 4V, have been designed and fabricated. Comparison of output parameters measured at two different conditions (i.e., under flash lamp and laser beam) has been performed.

14 SOLAR ENERGY↗
DOE OSTI2020

From IEC 61853 power measurements to PV system simulations.

The IEC 61853 PV module energy rating standard requires measuring module power (and hence efficiency) over a matrix of irradiance and temperature conditions. These matrix points represent nearly the full range of operating conditions encountered in the field in all but the most extreme locations, and create an opportunity to develop alternative approaches to existing modelssuch as the single-diode models and the Sandia Array Performance Modelfor calculating system performance. This report begins by discussing the bilinear interpolation and extrapolation method from IEC 61853-3, and then describes four existing model-based methods that could be used with matrix measurements. Then a new model is developed and all options are compared according to seven objective criteria using the matrix measurements of four PV modules of different technologies. The results show that the new model is an excellent candidate for launching power matrix-based PV system simulations.

14 SOLAR ENERGY↗
DOE OSTI2020

Systems and methods for direct thermal receivers using near blackbody configurations

An aspect of the present disclosure is a receiver for receiving radiation from a heliostat array that includes at least one external panel configured to form an internal cavity and an open face. The open face is positioned substantially perpendicular to a longitudinal axis and forms an entrance to the internal cavity. The receiver also includes at least one internal panel positioned within the cavity and aligned substantially parallel to the longitudinal axis, and the at least one internal panel includes at least one channel configured to distribute a heat transfer medium.

14 SOLAR ENERGY↗
DOE OSTI2022

Power Electronic Hardware-in-the-Loop (PE-HIL): Testing Individual Controllers in Large-Scale Power Electronics Systems

Large power electronics systems like multi-port autonomous reconfigurable solar power plant (MARS) are increasingly being researched upon to integrate emerging energy sources. MARS connects photovoltaic (PV) systems and energy storage systems (ESSs) to high-voltage direct current (HVdc) links/grids and high-voltage alternating current (ac) transmission grids. As these large power electronics systems incorporate complex hierarchical control systems that are close-by and communicate fast, the control systems require an unique power electronic hardware-in-the-loop (PE-HIL) real-time architecture to evaluate individual controllers. In this paper, a PE-HIL real-time architecture is proposed to evaluate one of the hundreds to thousands of digital signal processors (DSPs) that are a part of the complex hierarchical control system. The DSP connects to a central processing unit (CPU) and a field programmable gate array (FPGA) that form a part of the upper levels of the control system. The DSP is part of the lower level of the control system. The proposed PE-HIL architecture is tested and evaluated. Preliminary test results are presented to showcase the concept.

Debnath, Suman↗
DOE OSTI2019

Light-Driven Charge Transfer in Face-to-Face Donor-Spacer-Acceptor Supramolecular Systems

The efficient conversion of sunlight to a useful form of energy both in green plants and in manmade dye-sensitized solar cells requires the efficient separation of a positive and negative charge. The charge separation process begins with the absorption of visible or ultraviolet light by a pigment such as chlorophyll or a dye such as a transition metal complex followed by fast electron transfer to a neighboring molecule to form a pair of ionized molecules with opposite charges. At that point, one of the two opposite charges must rapidly move away from the other one by the process of charge separation. Once the migrating charge reaches its destination, it can be converted to electrical or chemical energy. The overall efficiency of charge separation in these systems is determined by the competition between charge separation and charge recombination at each stage in the process. Whereas most investigations of photoinduced charge separation have employed synthetic polymers or covalent linkages to separate the photoactive molecular and charge acceptor, we have employed the natural biopolymer DNA for this purpose. DNA possesses a unique structure consisting of a hydrophobic core of hydrogen-bonded base pairs which form a one-dimensional π-stacked array. The possibility that the π-stacked base pairs of DNA might function as a one-dimensional conductor or molecular wire was first advanced over 50 years ago. However, systematic measurements of the dynamics and efficiency of charge separation in DNA-based systems were not undertaken prior to the initiation of our studies 22 years ago. A variety of organic chromophores can be attached to one or both ends of the base pair domain of DNA or at any location within the domain. The length and base sequence of the base pair domain can also be varied. The structures of these synthetic derivatives of DNA have been determined using a combination of X-ray diffraction, NMR spectroscopy, and molecular modeling. Selective excitation with UV or visible light of the appropriate chromophore can effect injection of either positive charge (holes) or negative charge (electrons) into the base pair domain. The dynamics of hole or electron injection can be studied by a combination of fluorescence quenching and transient absorption measurements. Moreover, the simple design of our systems is amenable to theoretical modeling, allowing the development and testing of models which may prove applicable to more complex systems. Our initial studies of hole transport in short synthetic DNA with either repeating or alternating base sequences showed it to be strongly distance dependent, seemingly contradicting claims that DNA might serve as a wire in molecular electron devices. Further research on the base-sequence dependence of hole transport dynamics showed that significant enhancement in hole transport dynamics could be achieved by the used of special sequences designed to prevent the photo-generated charges from recombining. More recent experimental research and theoretical modelling has served to define each stage of the charge-separation process: electronic excitation, hole injection, hole transport, hole transport, and charge recombination. DNA is less effective as a carrier for electron transport; however, many of these details have also been determined for this process. In summary, a combination of molecular design and synthesis, spectroscopy, and theory have made possible the most complete study of photoinduced charge separation on any complex donor-bridge-acceptor system studied to date. These results serve as a benchmark to which related studies can be compared.

14 SOLAR ENERGY↗
DOE OSTI2022

Synthesis of bacteriochlorins bearing diverse β-substituents

Synthetic bacteriochlorins, analogues of native bacteriochlorophylls, provide absorption in the near-infrared spectral region and hence are valuable for fundamental studies in photochemistry and applications ranging from solar energy conversion to photomedicine. The full realization of such opportunities hinges on access to synthetically malleable bacteriochlorins. Here, two established routes that rely on self-condensation of a dihydrodipyrrin-acetal or dihydrodipyrrin-carboxaldehyde have been exploited to prepare 6 bacteriochlorins (2 new, 4 known in improved fashion). Each bacteriochlorin contains a gem-dimethyl group in the reduced, pyrroline ring to ensure stability toward adventitious dehydrogenation. These and related synthetic bacteriochlorins have been derivatized to tailor the perimeter of the macrocycle with diverse groups, affording 9 additional new bacteriochlorins and 4 known bacteriochlorins. By direct installation and/or derivatization, the scope of attached entities in this collection includes alkyl, amino, aryl, bromo, carboethoxy, oxo, phenylethynyl, and pyridyl. Furthermore, the bacteriochlorins are suited for surface attachment, bioconjugation, water-solubilization, vibrational studies, and elaboration into multichromophore arrays. Altogether the synthesis of 25 new compounds (11 bacteriochlorins, 14 precursors) is described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗