SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We describe a progression from pilot studies to development and use of domain-specific verification and validation (V&V) automation. Our domain is the testing of an AI planning system that forms a key component of an autonomous spacecraft.
This paper examines modeling and simulation challenges for deployable spacecraft structures with softgood components. Previous studies highlighted the numerical challenges due to the mixture of high stiffness and low stiffness contact in this class of structures. This paper examines the use of the commercial LS-DYNA nonlinear finite element code on a set of relevant benchmark problems.
NASA has planned a mission to study Jupiter’s moon, Europa. The mission would place a spacecraft into orbit around Jupiter, performing nominally 45 flybys of the moon. The suite of instruments onboard the spacecraft would investigate Europa’s potential to sustain life, studying the moon’s atmosphere, water-ice crust, suspected subsurface ocean, and rocky interior. The radiation environment at Europa’s orbit is severe and presents a significant threat to the spacecraft. There are several radiation effects that could be problematic, one of which is internal charging. Problems due to internal charging arise when high energy electrons penetrate the spacecraft and deposit within onboard dielectrics or floating metals. These charges can build up over time, generating electric fields that exceed the breakdown strength of materials in the region. A rapid discharge of the stored charges may occur, sending current pulses into electronics and potentially damaging them. An Internal Electrostatic Discharge (IESD) design environment was created for the planned Europa mission [Kim et al, in press]. The IESD design environment is meant to characterize the part of the radiation environment that poses the largest threat to the spacecraft with respect to internal charging. The environment was based off of electron data gathered by the Galileo spacecraft. Over the past year, the internal charging threat to several hardware components of the planned Europa Clipper spacecraft have been characterized using simulations and/or tests. The subject report documents one such test on Micro-D connectors.
The National Academies Decadal Survey for Earth Science recommended that NASA pursue global imaging spectroscopy and thermal infrared measurements in the coming decade [1]. Both measurements would offer repeat coverage on approximately five-day to biweekly cadence, with comprehensive coverage of the globe's coastal and terrestrial area. This would be an unprecedented volume of data with the potential to transform remote sensing practice. To address this recommendation, NASA has sponsored a concept study by NASA research centers and associated university partners (https://sbg.jpl.nasa.gov). This study is determining a family of architecture options - including launch vehicle, spacecraft, instrument, and suborbital components - that could address the Decadal Survey objectives. The architecture study is driven by science needs and builds on input of the research community. As of this writing, the study is entering a phase in which a large field of system possibilities is pared down to a representative handful for an ultimate decision by NASA.
We investigate waves close to the lower-hybrid frequency in 12 magnetotail reconnection electron diffusion region (EDR) events with guide field levels of near-zero to 30%. In about half of the events, the wave vector has a small component along the current sheet normal, consistent with known lower-hybrid drift wave properties, but the perpendicular magnetic field fluctuations can be comparable or greater than the parallel component, a feature unique to the waves inside and adjacent to EDRs. Another new wave property is that the wave vector has a significant component along the current sheet normal in some events and completely along the normal for one event. In 1/4of the events, the ∇∙𝑷(sub 𝑒) term has a significant contribution to the wave electric field, possibly a feature of lower-hybrid waves more likely to exist in the diffusion region than further away from the X-line. Electron temperature variations are correlated with the wave potential, due to wave electric field acceleration and crossings at the corrugated separatrix region with different amounts of mixing between reconnection inflowing and outflowing populations. The latter also leads to the anti-correlation between parallel and perpendicular temperature components. Using four-spacecraft measurements, the magnetic field line twisting is demonstrated by the correlated fluctuations in (∇×𝑽(sub 𝐸×𝐵))||and (∇×𝐁)||. The lower-hybrid wave in the EDR of weak guide field reconnection may be generated near separatrices and penetrate to the mid-plane or locally generated, and the latter possibility is beyond the prediction of previous reconnection simulations.
The American Institute of Aeronautics and Astronautics (AIAA) has undertaken an important standards initiative in the area of spacecraft guidance, navigation, and control (GN&C) subsystem interfaces. The objective of this effort is to establish standards that will promote interchangeability of major GN&C components, thus enabling substantially lower spacecraft development costs. Although initiated by developers of conventional spacecraft GN&C, it is anticipated that interface standards will also be of value in reducing the development costs of micro-engineered spacecraft. The standardization targets are specifically limited to interfaces only, including information (i.e. data and signal), power, mechanical, thermal, and environmental interfaces between various GN&C components and between GN&C subsystems and other subsystems. The current emphasis is on information interfaces between various hardware elements (e.g., between star trackers and flight computers). The poster presentation will briefly describe the program, including the mechanics and schedule, and will publicize the technical products as they exist at the time of the conference. In particular, the rationale for the adoption of the AS1773 fiber-optic serial data bus and the status of data interface standards at the application layer will be presented.
Recent advances in formation keeping for large numbers of spacecraft using the Autonomous Formation Flying are presented. This sensor, currently under development at JPL, has been identified as a key component in future formation flying spacecraft missions. The sensor provides accurate range and bearing measurements between pairs of spacecraft using GPS technology. Previous theoretical work by the authors has focused on developing a decentralized scheduling algorithm to control the tasking of such a sensor between the relative range and bearing measurements to each node in the formation. The resulting algorithm has been modified to include switching constraints in the sensor. This paper also presents a testbed for real time validation of a sixteen-node formation based on the Stellar Imager mission. Key aspects of the simulation include minimum fuel maneuvers based on free-body dynamics and a three body propagator for simulating the formation at L2.
In the preliminary design of spacecraft, spreadsheets are often used to scale and size components. While offering some benefits, using spreadsheets does have some drawbacks. In particular, since time is typically not one of the input values, overly conservative designs can result because scheduling issues are not considered. To overcome this problem, the Space Systems Concepts Division is developing a time dependent, virtual spacecraft simulation system. Since the performance of many components on the spacecraft are sensitive to the attitude of the spacecraft, a method or function is needed to determine the attitude of a part. Thus, the primary goal of this research was to develop a software module that calculates the attitude of an arbitrary part on the spacecraft. This module is then used by subsystem engineers, e.g. the power subsystem, to compute the attitude relative to the spacecraft, the sun, the Earth, or a user specified target.
The application of commonality in a system represents an attempt to reduce costs by reducing the number of unique components. Research in this area has primarily addressed a significant benefit of commonality, the reduction of parts inventories in assemble-to-order manufacturing systems. Likewise, in an operational system subject to component failures, spares inventories are reduced through the increased commonality of components. However, commonality tends to degrade system performance parameters, a degradation that can preclude commonality in resource-constrained systems such as spacecraft. The functional impacts of component commonality on a system is addressed in a manner that allows inclusion in a commonality analysis.
Mariner IV spacecraft mechanical configuration designing and component packaging techniques
A spacecraft S-band power amplifier for Nimbus satellite is reported that achieves stability by use of moderate Q input and output circuits. The discrete component amplifier uses distributed inductance and small piston capacitors for resonance and impedance matching of the transistor to 50 ohm input and output.
Spacecraft electronics including those used at the Jet Propulsion Laboratory (JPL), demand production of highly reliable assemblies. JPL has recently completed an extensive study, funded by NASA's code Q, of the interplay between manufacturing defects and reliability of ball grid array (BGA) and surface mount electronic components.
Measurements of coronal mass ejections (CMEs) by multiple spacecraft at small radial separations but larger longitudinal separations is one of the ways to learn about the three-dimensional structure of CMEs. Here, we take advantage of the orbit of the Wind spacecraft that ventured to distances of up to 0.012 au from the Sun-Earth line during 2000-2002. Combined with measurements from the Advanced Composition Experiment, which is in a tight halo orbit around L1, the multipoint measurements allow us to investigate how the magnetic field inside magnetic ejecta (MEs) changes on scales of 0.005-0.012 au. We identify 21 CMEs measured by these two spacecraft for longitudinal separations of 0.007 au or more. We find that the time-shifted correlation between 30 minute averages of the non-radial magnetic field components measured at the two spacecraft is systematically above 0.97 when the separation is 0.008 au or less, but is on average 0.89 for greater separations. Overall, these newly analyzed measurements, combined with 14 additional ones when the spacecraft separation is smaller, point toward a scale length of longitudinal magnetic coherence inside MEs of 0.25-0.35 au for the magnitude of the magnetic field, but 0.06-0.12 au for the magnetic field components. This finding raises questions about the very nature of MEs. It also highlights the need for additional "mesoscale" multipoint measurements of CMEs with longitudinal separations of 0.01-0.2 au.
The thermal design and the instrument thermal vacuum (T/V) test of the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) instrument were based on the Landsat-4, 5 and 6 heritage. The ETM+ scanner thermal model was also inherited from Landsat-4, 5 and 6. The temperature predictions of many scanner components in the original thermal model had poor agreement with the spacecraft and instrument integrated sun-pointing safehold (SPSH) thermal balance (T/B) test results. The spacecraft and instrument integrated T/B test led to a change of the Full Aperture Calibrator (FAC) motor stack "solar shield" coating from MIL-C-5541 to multi-layer insulation (MLI) thermal blanket. The temperature predictions of the Auxiliary Electronics Module (AEM) in the thermal model also had poor agreement with the T/B test results. Modifications to the scanner and AEM thermal models were performed to give good agreement between the temperature predictions and the test results. The correlated ETM+ thermal model was used to obtain flight temperature predictions. The flight temperature predictions in the nominal 15-orbit mission profile, plus margins, were used as the yellow limits for most of the ETM+ components. The spacecraft and instrument integrated T/B and TN test also revealed that the standby heater capacity on the Scan Mirror Assembly (SMA) was insufficient when the Earth Background Simulator (EBS) was 1 50C or colder, and the baffle heater possibly caused the coherent noise in the narrow band data when it was on. Also, the cooler cool-down was significantly faster than that in the instrument T/V test, and the coldest Cold Focal Plane Array (CFPA) temperature achieved was colder.
The modeling and simulation of large dc spacecraft power systems necessitates considering the spacecraft power system as an interconnection of modular components. This paper presents a state-variable-based approach for dc spacecraft power system modeling and simulation. Each modular component is treated as a two-port network, and a state model is written with the port voltages as the inputs. The state model of a component is solved independently of the other components using its state transition matrix. The state variables of each component are updated assuming that the inputs are constant. Network analysis principles are then utilized to calculate the component inputs.
The incoming total solar irradiance (TSI), typically referred to as the solar constant, is being studied to identify long-term TSI changes, which may trigger global climate changes. The TSI is normalized to the mean earth-sun distance. Studies of spacecraft TSI data sets confirmed the existence of 0.1 %, long-term TSI variability component with a period of 10 years. The component varied directly with solar magnetic activity associated with recent 10-year sunspot cycles. The 0.1 % TSI variability component is clearly present in the spacecraft data sets from the 1984-2004, Earth Radiation Budget Experiment (ERBE) active cavity radiometer (ACR) solar monitor; 1978-1993, Nimbus-7 HF; 1980-1989, Solar Maximum Mission [SMM] ACRIM; 1991-2004, Upper Atmosphere Research Satellite (UARS) ACRIM; 1996-2003, Solar and Heliospheric Observatory (SOHO)/VIRGO, Space Science (ATLAS), 2000-2004, ACRIMSAT; and 2003-2004 SOlar Radiation and Climate Experiment (SORCE) active cavity radiometer (ACR) missions. From October 1984, through March 2004, the ERBS/ERBE solar monitor was used to produce the longest continuous data set of total solar irradiance (TSI) variability measurements. The solar monitor is located on Shuttle Atmospheric Laboratory for Applications and the NASA Earth Radiation Budget Satellite (ERBS). Maximum TSI values occurred during the 1989-1991, and 1998-2002, time frames; while minimum [quiet sun] TSI levels occurred during 1986 and 1996. Recent ERBS measurements indicate that the TSI is decreasing to forecasted, minimum levels by 2006. Using the discontinuous non-operational Nimbus-7, SMM ACRIM, and UARS ACRIM mission TSI data sets, Wilson and Mordvinor (2003) suggested the existence of an additional long-term TSI variability component, 0.05 %, with a period longer than a decade. Analyses of the ERBS/ERBE data set do not support the Wilson and Mordvinor analyses approach because it used the Nimbus-7 data set which exhibited a significant ACR response shift of 0.7 Wm-2
Orbital testing requirements for spacecraft guidance, navigation and control systems, and components
Liquid fluorine feed system for spacecraft propulsion