Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spectral element method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Model atmospheres for M (sub)dwarf stars. 1: The base model grid

We have calculated a grid of more than 700 model atmospheres valid for a wide range of parameters encompassing the coolest known M dwarfs, M subdwarfs, and brown dwarf candidates: 1500 less than or equal to T(sub eff) less than or equal to 4000 K, 3.5 less than or equal to log g less than or equal to 5.5, and -4.0 less than or equal to (M/H) less than or equal to +0.5. Our equation of state includes 105 molecules and up to 27 ionization stages of 39 elements. In the calculations of the base grid of model atmospheres presented here, we include over 300 molecular bands of four molecules (TiO, VO, CaH, FeH) in the JOLA approximation, the water opacity of Ludwig (1971), collision-induced opacities, b-f and f-f atomic processes, as well as about 2 million spectral lines selected from a list with more than 42 million atomic and 24 million molecular (H2, CH, NH, OH, MgH, SiH, C2, CN, CO, SiO) lines. High-resolution synthetic spectra are obtained using an opacity sampling method. The model atmospheres and spectra are calculated with the generalized stellar atmosphere code PHOENIX, assuming LTE, plane-parallel geometry, energy (radiative plus convective) conservation, and hydrostatic equilibrium. The model spectra give close agreement with observations of M dwarfs across a wide spectral range from the blue to the near-IR, with one notable exception: the fit to the water bands. We discuss several practical applications of our model grid, e.g., broadband colors derived from the synthetic spectra. In light of current efforts to identify genuine brown dwarfs, we also show how low-resolution spectra of cool dwarfs vary with surface gravity, and how the high-regulation line profile of the Li I resonance doublet depends on the Li abundance.

Allard, France↗

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses that may not be important in longer wavelength designs. This paper describes the design of multi- bandwidth filters operating in the 1-5 micrometer wavelength range. This work follows on a previous design. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using microlithographic techniques and used in spectral imaging applications will be presented.

Cwik, Tom↗

Probabilistic Models for Solar Particle Events

Probabilistic Models of Solar Particle Events (SPEs) are used in space mission design studies to provide a description of the worst-case radiation environment that the mission must be designed to tolerate.The models determine the worst-case environment using a description of the mission and a user-specified confidence level that the provided environment will not be exceeded. This poster will focus on completing the existing suite of models by developing models for peak flux and event-integrated fluence elemental spectra for the Z>2 elements. It will also discuss methods to take into account uncertainties in the data base and the uncertainties resulting from the limited number of solar particle events in the database. These new probabilistic models are based on an extensive survey of SPE measurements of peak and event-integrated elemental differential energy spectra. Attempts are made to fit the measured spectra with eight different published models. The model giving the best fit to each spectrum is chosen and used to represent that spectrum for any energy in the energy range covered by the measurements. The set of all such spectral representations for each element is then used to determine the worst case spectrum as a function of confidence level. The spectral representation that best fits these worst case spectra is found and its dependence on confidence level is parameterized. This procedure creates probabilistic models for the peak and event-integrated spectra.

Adams, James H., Jr.↗

Absorber Clamp for Microcalorimeter Decay Energy Spectrometry

Microcalorimeter Decay Energy Spectrometry (DES) is of interest to nuclear safeguards due to its ability to provide high precision isotopic compositions of nanogram-to microgram-scale samples of Pu and U and related daughter products. The DES method is able to record decay energy of each alpha-decay event in a sample that is embedded in a metal matrix (absorber) and thermally linked to a microcalorimeter detector. This work optimizes the DES technique used to thermally link the absorber and microcalorimeter detector element to allow for more rapid assembly and to increase detector performance and operating life. Optimized attachment methods are crucial for enhancing the viability of DES in high-sample-throughput facilities, such as those that support international nuclear safeguards measurements. Here, in this study, we designed and implemented a pressure-based absorber clamp and evaluated the performance of this new attachment method relative to pressed indium bond attachment. Results using the absorber clamp demonstrate a streamlined detector assembly procedure that minimizes accidental damage to detectors, as well as increasing detector pulse speeds by 57%. Spectral comparison shows the clamp preserves detector performance relative to indium attachment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diagnostics of sources of disturbances and distribution of vibrations over the width of a tape in tape-feed mechanisms

Disturbances created by certain assemblies and components of tape-feed mechanisms (TFM) and acting on a moving magnetic tape are studied. The method, based on elements of digital logic, is established by stress-strain diagrams of the longitudinal deformations and vibrations across the width of a magnetic tape. Experimental studies were carried out for determination of the functional relationships of longitudinal deformations in a section of magnetic tape to the magnitude of roller play, tension vibrations rate of movement, and elasticity of magnetic tapes. A block diagram of the measurements is shown. Appropriate digital computer algorithms and programs were proposed for statistical analysis of the data obtained. Estimates of the mathematical expectation, dispersion, intercorrelation function, energy spectral density, and distribution pattern of the random process values were calculated.

Kenstavichyus, A. B. B.↗

LIBS Spectral Data for a Mixed Actinide Fuel Pellet Containing Uranium, Plutonium, Neptunium and Americium (V.1)

Laser-induced breakdown spectroscopy (LIBS) was used to analyze a mixed actinide fuel pellet containing 75% UO 2 /20% PuO 2 /3% AmO 2 /2% NpO 2 . The preliminary data shown here is the first report of LIBS analysis of a mixed actinide fuel pellet, to the authors knowledge. The LIBS spectral data was acquired in a plutonium facility at Los Alamos National Laboratory where the sample was contained within a glove box. The initial installation of the glove box was not intended for complete ultraviolet (UV), visible (VIS) and near infrared (NIR) transmission, therefore the LIBS spectrum is truncated in the UV and NIR regions due to the optical transmission of the window port and filters that were installed. The optical collection of the emission from the LIBS plasma will be optimized in the future. However, the preliminary LIBS data acquired is worth reporting due to the uniqueness of the sample and spectral data. The analysis of several actinides in the presence of each other is an important feature of this analysis since traditional methods must chemically separate uranium, plutonium, neptunium, and americium prior to analysis. Due to the historic nature of the sample fuel pellet analyzed, the provided sample composition of 75% UO 2 /20% PuO 2 /3% AmO 2 /2% NpO 2 cannot be confirm without further analytical processing. Uranium, plutonium, and americium emission lines were abundant and easily assigned while neptunium was more difficult to identify. There may be several reasons for this observation, other than knowing the exact sample composition of the fuel pellet. First, the atomic emission wavelength resources for neptunium are limited and such techniques as hollow cathode discharge lamp have different dynamics than the plasma used in LIBS which results in different emission spectra. Secondly, due to the complex sample of four actinide elements, which all have very dense electronic energy levels, there may be reactions and interactions occurring within the plasma, such as collisional energy transfer, that might be a factor in the reduction in neptunium emission lines. Neptunium has to be analyzed alone using LIBS to further understand the dynamics that may be occurring in the plasma of the mixed actinide fuel pellet sample. The LIBS data suggests that the emission spectrum for the mixed actinide fuel pellet is not simply the sum of the emission spectra of the pure samples but is dependent on the species present in the plasma and the interactions and reactions that occur within the plasma. Finally, many of the neptunium lines are in the near infrared region which is drastically reduced in intensity by the current optical setup and possibly the sensitivity of the emission detector in the spectral region. Once the optics are replaced and the optical collection system is modified and optimized, the probability of observing emission lines for neptunium might be increased significantly. The mixed actinide fuel pellet was analyzed under the experimental conditions listed in Table 1. The LIBS spectra of the fuel pellet are shown in Figures 1-49. The spectra are labeled with the observed wavelength and atomic species (both neutral (I) and ionic (II)). Table 2 is a complete list of the observed and literature based emission wavelengths. The literature wavelengths have references including NIST Atomic Spectra Database (NIST), B.A. Palmer et al. 'An Atlas of Uranium Emission Intensities in a Hollow Cathode Discharge' taken at the Kitt Peak National Observatory (KPNO), R.L. Kurucz 1995 Atomic Line Data from the Smithsonian Astrophysical Observatory (SAO), J. Blaise et al. 'The Atomic Spectrum of Plutonium' from Argonne National Laboratory (BFG), and M. Fred and F.S. Tomkins, 'Preliminary Term Analysis of Am I and Am II Spectra' (FT). The dash (-) shown under Ionic State indicates that the ionic state of the transition was not available. In the spectra, the dash (-) is replaced with a question mark (?). Peaks that are not assigned are most likely real features and not noise but cannot be confidently assigned to a transition without further investigation. Several peaks have multiple assignments due to limited resolution of the spectrometer used (20,000, $\lambda$/$\Delta$$\lambda$) and without the availability, at this point in time, of pure PuO 2 , AmO 2 , and NpO 2 to confirm the identity of the peaks. A different spectrometer was used in the plutonium facility to collect the mixed actinide fuel pellet data (Echelle 3000) than the DUO 2 , ThO 2 and uranium ore previously reported (Echelle 4000) which accounts for the slight shift in the observed wavelength of the uranium emission lines.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Single crystals of the fluorite nonstoichiometric phase Eu{sub 0.916}{sup 2+}Eu{sub 0.084}{sup 3+}F{sub 2.084} (conductivity, transmission, and hardness)

The nonstoichiometric phase EuF{sub 2+x} has been obtained via the partial reduction of EuF{sub 3} by elementary Si at 900-1100 deg. C. Eu{sub 0.916}{sup 2+}Eu{sub 0.084}{sup 3+}F{sub 2.084} (EuF{sub 2.084}) single crystals have been grown from melt by the Bridgman method in a fluorinating atmosphere. These crystals belong to the CaF{sub 2} structure type (sp. gr. Fm3-barm) with the cubic lattice parameter a = 5.8287(2) A, are transparent in the spectral range of 0.5-11.3 {mu}m, and have microhardness H{sub {mu}} = 3.12 {+-} 0.13 GPa and ionic conductivity {sigma} = 1.4 x 10{sup -5} S/cm at 400 deg. C with the ion transport activation energy E{sub a} = 1.10 {+-} 0.05 eV. The physicochemical characteristics of the fluorite phases in the EuF{sub 2} - EuF{sub 3} systems are similar to those of the phases in the SrF{sub 2} - EuF{sub 3} and SrF{sub 2} - GdF{sub 3} systems due to the similar lattice parameters of the EuF{sub 2} and SrF{sub 2} components. Europium difluoride supplements the list of fluorite components MF{sub 2} (M = Ca, Sr, Ba, Cd, Pb), which are crystal matrices for nonstoichiometric (nanostructured) fluoride materials M{sub 1-x}R{sub x}F{sub 2+x} (R are rare earth elements).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The diversity of aluminum-based drinking water treatment residuals for use in environmental remediation

Drinking water treatment residuals (DWTRs) are complex mixtures of organic and inorganic phases generally disposed of as waste materials. However, their strong sorptive properties could be further exploited to immobilize contaminants. To characterize these materials, we applied a range of analytical techniques to a set of aluminum-based DWTRs. Here we determined surface areas, elemental compositions using CHNS analysis and X-ray fluorescence (XRF), performed thermogravimetric analyses paired with mass spectrometry (TGA-MS), and used synchrotron-based methods: X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). Elemental analyses and specific surface area measurements – that vary between 7.23 ± 0.03 and 197.6 ± 0.9 m 2 g –1 – indicate that non-coagulant additives must play an important role in controlling sorption. High resolution powder XRD reveals the presence of only a few crystalline minerals mostly derived from source waters or additives. Fe was detected by XRF in all samples, whereas Mn was present in significant levels in samples with potassium permanganate as additive. The chemical speciation of these elements was characterized by performing spectral decompositions of XAS spectra. The spectral features of Fe are consistent with iron(III) oxides/hydroxides and structural iron in clays. On the other hand, Mn is predominantly present under its reduced form, Mn(II).

54 ENVIRONMENTAL SCIENCES↗

In situ photoemission spectroscopy study on formation of HfO{sub 2} dielectrics on epitaxial graphene on SiC substrate

High quality HfO{sub 2} dielectrics have been grown on epitaxial graphene on 4H-SiC substrates and have been studied by using in situ x-ray photoemission spectroscopy. The in situ thermal treatment shows that the HfO{sub 2}/graphene/4H-SiC heterojunctions have good thermal stability up to 650 deg. C. A shift of core-level spectra from graphene layer implies that charge transfer takes place at the interface. The high thermal stability and sufficient barrier heights between HfO{sub 2} and graphene indicate that high-k dielectric grown on graphene is very promising for the development of graphene-based electronic devices.

36 MATERIALS SCIENCE↗

Brome isotope selective control of CF{sub 3}Br molecule clustering by IR laser radiation in gas-dynamic expansion of CF{sub 3}Br – Ar mixture

We report the results of research on the experimental control of CF{sub 3}Br molecule clustering under gas-dynamic expansion of the CF{sub 3}Br – Ar mixture at a nozzle exit by using IR laser radiation. A cw CO{sub 2} laser is used for exciting molecules and clusters in the beam and a time-of-flight mass-spectrometer with laser UV ionisation of particles for their detection. The parameters of the gas above the nozzle are determined (compositions and pressure) at which intensive molecule clustering occurs. It is found that in the case of the CF{sub 3}Br gas without carrier when the pressure P{sub 0} above the nozzle does not exceed 4 atm, molecular clusters actually are not generated in the beam. If the gas mixture of CF{sub 3}Br with argon is used at a pressure ratio 1 : N, where N ⩾ 3, and the total pressure above the nozzle is P{sub 0} ⩾ 2 atm, then there occurs molecule clustering. We study the dependences of the efficiency of suppressing the molecule clustering on parameters of the exciting pulse, gas parameters above the nozzle, and on a distance of the molecule irradiation zone from the nozzle exit section. It is shown that in the case of resonant vibrational excitation of gas-dynamically cooled CF{sub 3}Br molecules at the nozzle exit one can realise isotope-selective suppression of molecule clustering with respect to bromine isotopes. With the CF{sub 3}Br – Ar mixtures having the pressure ratio 1 : 3 and 1 : 15, the enrichment factors obtained with respect to bromine isotopes are k{sub enr} ≈ 1.05 ± 0.005 and k{sub enr} ≈ 1.06 ± 0.007, respectively, under jet irradiation by laser emission in the 9R(30) line (1084.635 cm{sup −1}). The results obtained let us assume that this method can be used to control clustering of molecules comprising heavy element isotopes, which have a small isotopic shift in IR absorption spectra. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic data and spectral line intensities for Ni XVII

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ni XVII. We include in the calculations the 23 lowest configurations, corresponding to 159 fine-structure levels: 3l3l', 3l4l'', and 3s5l''', with l, l' = s, p, d, l'' = s, p, d, f, and l''' = s, p, d. Collision strengths are calculated at five incident energies for all transitions at varying energies above the threshold of each transition. One additional energy, very close to the threshold of each transition, has also been included. Calculations have been carried out using the Flexible Atomic Code in the distorted wave approximation. Additional calculations have been performed with the University College London suite of codes for comparison. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8} - 10{sup 14} cm{sup -3} and at an electron temperature of log T{sub e}(K) = 6.5, corresponding to the maximum abundance of Ni XVII. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Atomic data and spectral line intensities for Ni XI

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ni XI. We include in the calculations the 12 lowest configurations, corresponding to 180 fine-structure levels: 3s{sup 2}3p{sup 6}, s{sup 2}3p{sup 5}3d, 3s{sup 2}3p{sup 4}3d{sup 2}, 3s3p{sup 6}3d, 3s{sup 2}3p{sup 5}4l, and 3s3p{sup 6}4l with l = s, p, d, f. Collision strengths are calculated at five incident energies for all transitions: 7.45, 17.6, 31.4, 50.1, and 75.2 Ry above the threshold of each transition. An additional energy, very close to the transition threshold, has been added, whose value is between 0.0007 Ry and 0.25 Ry depending on the levels involved. Calculations have been carried out using the Flexible Atomic Code. The scattering problem is solved in the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, combined with close coupling collision excitation rate coefficients available in the literature for the lowest 17 levels, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8}-10{sup 14} cm{sup -3} and at an electron temperature of logT{sub e}K=6.1, corresponding to the maximum abundance of Ni XI. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses tha_ may not be important in longer wavelength designs. This paper describes the design of multi-bandwidth filters operating in the I-5 micrometer wavelength range. This work follows on previous design [1,2]. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using micro-lithographic techniques and used ir spectral imaging applications will be presented.

Cwik, Tom↗

Photochemical reaction of sulfur hexafluoride with water in low-temperature xenon matrices

Sulfur hexafluoride SF{sub 6} is a very stable molecule with which very few reactions with other molecules have been reported. Here, we report a photochemical reaction of SF{sub 6} with water molecules using a matrix-isolation technique, where SF{sub 6} and H{sub 2}O were co-condensed in Xe matrices, and the products were observed using infrared spectroscopy. Irradiation at 193 nm from an ArF excimer laser caused the simultaneous decomposition of SF{sub 6} and H{sub 2}O, which resulted in the production of novel species. Infrared spectra and molecular orbital calculations of the species showed that the product was a SF{sub 4}{center_dot}{center_dot}{center_dot}HF{center_dot}{center_dot}{center_dot}HOF complex, which consists of hydrogen bonds and charge transfer interaction between S and F atoms. The assignment of the species was confirmed by isotope shifts using D and {sup 18}O isotope substitutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ARPES spectral functions and Fermi surface for La{sub 1.86}Sr{sub 0.14}CuO{sub 4} compared with LDA + DMFT + {Sigma}{sub k} calculations

The slightly underdoped high-temperature system La{sub 1.86}Sr{sub 0.14}CuO{sub 4} (LSCO) is studied by means of high-energy high-resolution angular resolved photoemission spectroscopy (ARPES) and the combined LDA + DMFT + {Sigma}{sub k} computational scheme. The corresponding one-band Hubbard model is solved via dynamical mean field theory (DMFT), and the model parameters needed are obtained from first principles in the local density approximation (LDA). An 'external' k-dependent self-energy {Sigma}{sub k} describes the interaction of correlated electrons with antiferromagnetic (AFM) pseudogap fluctuations. Experimental and theoretical data clearly show a 'destruction' of the LSCO Fermi surface in the vicinity of the ({pi}, 0) point and formation of 'Fermi arcs' in the nodal directions. ARPES energy distribution curves as well as momentum distribution curves demonstrate a deviation of the quasiparticle band from the Fermi level around the ({pi}, 0) point. The same behavior of spectral functions follows from theoretical calculations suggesting the AFM origin of the pseudogap state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiscale Methods for Accurate, Efficient, and Scale-Aware Models of the Earth System

The major goal of this project was to contribute improvements to the infrastructure of an Earth System Model in order to support research in the Multiscale Methods for Accurate, Efficient, and Scale-Aware models of the Earth System project. In support of this, the NCAR team accomplished two main tasks: improving input/output performance of the model and improving atmospheric model simulation quality. Improvement of the performance and scalability of data input and diagnostic output within the model required a new infrastructure which can efficiently handle the unstructured grids common in multiscale simulations. This allows for a more computationally efficient model, enabling more years of Earth System simulation. The quality of the model simulations was improved by reducing grid-point noise in the spectral element version of the Community Atmosphere Model (CAM-SE). This was achieved by running the physics of the model using grid-cell data on a finite-volume grid.

54 ENVIRONMENTAL SCIENCES↗

Chemical Compositions and Abundance Anomalies in Stellar Coronae ADP 99

Progress has been made using both EUVE (Extreme Ultraviolet Explorer) and ASCA (Advanced Satellite for Cosmology and Astrophysics) data and a new postdoctoral scientist has now been hired. Stars studied to date include YY Gem (dMe binary), xi Boo A (intermediate activity G8 V), xi UMa (more active G quadruple system) HR1099 (K1 IV + G5 V) RS CVn-like, AU Mic (dMe). In addition to a paper that concentrated on abundancies in HR1099, a paper was recently submitted on the coronal abundances of AR(tilde)Lac that revealed an interesting pattern of overabundances of very low FIP elements (Al and Ca) compared to the low FIP elements Si, Mg and Fe. Two papers are nearing completion on methods of analysis and on the abundances in the corona of AU(tilde)Mic. Additionally, two invited conference proceedings papers are being published on this work. The main conclusion of the study to date is that our existing ideas of coronal abundance anomalies need complete revision. The solar-like FIP effect is replaced by a pattern than appears to enhance high FIP elements rather than low FIP elements in very active stars. The archival studies we are undertaking now are revealing some key details of these patterns, and are beginning to map out the anomalies as a function of spectral type, a key goal of this study.

Drake, Jeremy↗

Surface Plasmon Resonance and Aggregate Stability of Silver Nanoparticle Complexes with Chemotripsin

Extinction spectra, effective sizes, and aggregate stability of silver nanoparticles and nanocomplexes of silver nanoparticles with chymotrypsin obtained by the reactions of chemical reduction of silver nitrate using sodium borohydride as a reducing agent are studied. It is shown that silver nanoparticles obtained in the absence of chymotrypsin are aggregatively stable only at pH values immediately after synthesis. The placement of the synthesized silver nanoparticles in buffer solutions with pH values from 3.0 to 12.0 resulted in the appearance of a wide absorption band in the visible region of the spectrum, which is due to the agglomeration of silver nanoparticles, which appears to be the result of the destruction of the double electric layer formed by the ions making up sodium borohydride. The presence of chymotrypsin in the reaction medium resulted in significant spectral changes. Unlike silver nanoparticles synthesized in the absence of chymotrypsin, for nanocomplexes of silver nanoparticles with chymotrypsin with a change in pH, the shape of the extinction spectra and the position of the surface plasmon resonance band were preserved, while nanocomplexes of silver nanoparticles with chymotrypsin retained the aggregative stability in solutions in the pH range from 3.0 to 12.0 within a month. The observed stabilization effect of silver nanoparticles over a wide pH range induced by the presence of chymotrypsin in the reaction medium can be used further to develop methods for immobilizing enzymes on nanoparticles of biogenic elements and for creating polyfunctional pharmaceuticals, in which the components of nanocomplexes have different biological activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗