Search NASA⌕ Search

SEARCH · Search NASA

Results for “Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Charge-coupled-device X-ray detector performance model

A model that predicts the performance characteristics of CCD detectors being developed for use in X-ray imaging is presented. The model accounts for the interactions of both X-rays and charged particles with the CCD and simulates the transport and loss of charge in the detector. Predicted performance parameters include detective and net quantum efficiencies, split-event probability, and a parameter characterizing the effective thickness presented by the detector to cosmic-ray protons. The predicted performance of two CCDs of different epitaxial layer thicknesses is compared. The model predicts that in each device incomplete recovery of the charge liberated by a photon of energy between 0.1 and 10 keV is very likely to be accompanied by charge splitting between adjacent pixels. The implications of the model predictions for CCD data processing algorithms are briefly discussed.

Bautz, M. W.↗

Development and application of computational aerothermodynamics flowfield computer codes

Multiple nozzle plume flow field is computed with a 3-D, Navier-Stokes solver. Numerical simulation is performed with a flux-split, two-factor, time asymptotic viscous flow solver of Ying and Steger. The two factor splitting provides a stable 3-D solution procedure under ideal-gas assumptions. An ad-hoc acceleration procedure that shows promise in improving the convergence rate by a factor of three for steady state problems is utilized. Computed solutions to generic problems at various altitude and flight conditions show flow field complexity and three-dimensional effects due to multiple nozzle jet interactions. Viscous, ideal gas solutions for the symmetric nozzle are compared with other numerical solutions.

Venkatapathy, Ethiraj↗

Reynolds-stress and dissipation rate budgets in a turbulent channel flow

The budgets for the Reynolds stresses and for the dissipation rate of the turbulence kinetic energy are computed using direct simulation data of a turbulent channel flow. The budget data reveal that all the terms in the budget become important close to the wall. For inhomogeneous pressure boundary conditions, the pressure-strain term is split into a return term, a rapid term, and a Stokes term. The Stokes term is important close to the wall. The rapid and return terms play different roles depending on the component of the term. A split of the velocity pressure-gradient term into a redistributive term and a diffusion term is proposed, which should be simpler to model. The budget data is used to test existing closure models for the pressure-strain term, the dissipation rate, and the transport rate. In general, further work is needed to improve the models.

Mansour, N. N.↗

An experimental mapping of the flow field behind a glaze ice shape on a NACA 0012 airfoil

The flow field about a NACA 0012 airfoil with a simulated glaze ice shape was studied. Split hot-film anemometry was used to measure the streamwise velocity component in the upper and lower separation bubbles aft of the glaze ice horns. Velocity profiles were presented as well as the boundary layer momentum and displacement thickness distributions through the bubbles. Data were presented at angles of attack of 0, 2 and 4 deg and clearly showed the large region of reverse flow. A detailed discussion of split hot-film acquisition and data reduction, and possible sources of error has been included.

Spring, Samuel A.↗

Implementing clips on a parallel computer

The C language integrated production system (CLIPS) is a forward chaining rule based language to provide training and delivery for expert systems. Conceptually, rule based languages have great potential for benefiting from the inherent parallelism of the algorithms that they employ. During each cycle of execution, a knowledge base of information is compared against a set of rules to determine if any rules are applicable. Parallelism also can be employed for use with multiple cooperating expert systems. To investigate the potential benefits of using a parallel computer to speed up the comparison of facts to rules in expert systems, a parallel version of CLIPS was developed for the FLEX/32, a large grain parallel computer. The FLEX implementation takes a macroscopic approach in achieving parallelism by splitting whole sets of rules among several processors rather than by splitting the components of an individual rule among processors. The parallel CLIPS prototype demonstrates the potential advantages of integrating expert system tools with parallel computers.

Riley, Gary↗

Accurate solutions, parameter studies and comparisons for the Euler and potential flow equations

Parameter studies are conducted using the Euler and potential flow equation models for unsteady and steady flows in both two and three dimensions. The Euler code is an implicit, upwind, finite volume code which uses the Van Leer method of flux-vector-splitting which has been recently extended for use on dynamic meshes and maintain all the properties of the original splitting. The potential flow code is an implicit, finite difference method for solving the transonic small disturbance equations and incorporates both entropy and vorticity corrections into the solution procedures thereby extending its applicability into regimes where shock strength normally precludes its use. Parameter studies resulting in benchmark type calculations include the effects of spatial and temporal refinement, spatial order of accuracy, far field boundary conditions for steady flow, frequency of oscillation, and the use of subiterations at each time step to reduce linearization and factorization errors. Comparisons between Euler and potential flows results are made as well as with experimental data where available.

Anderson, W. Kyle↗

A streamwise upwind algorithm for the Euler and Navier-Stokes equations applied to transonic flows

A new algorithm was developed for the Euler and Navier-Stokes equations that uses upwind differencing based on the streawise direction. This algorithm is time accurate and can be used in codes for calculating unsteady transonic flows over wings. Such codes can be used for the flutter analysis of wings. In this algorithm, the coordinate system is locally rotated to align with the streamwise direction. For differencing the convective terms in the streamwise direction, a new form of flux splitting is employed, in which the biasing depends on the local Mach number. In the plane perpendicular to the stream direction, the new flux splitting uses the condition of no flow in that local plane. By using a locally rotated coordinate system, the convective flux vector biasing depends on the total Mach number. Hence, the switching of the flux vector biasing occurs across shock waves and the proper domain of dependence is used in supersonic regions. For comparison, many other upwind methods switch differencing based on Mach number of shock waves in multidimensional flows. The formulas for the convective flux vector differencing do not contain any user specified parameters. So, the amount of numerical dissipation is automatically determined.

Goorjian, Peter M.↗

Solutions for hypersonic viscous flow over delta wings

A conical Navier-Stokes solver is developed to study hypersonic flow over delta wings. The differencing scheme used is van Leer flux vector splitting with MUSCL differencing. A flux limiter which involves a second difference in pressure was found to provide sharp, nonoscillatory shocks in windward and leeward flow regions. The governing equations are cast in finite-volume form and are solved using an explicit multistage method. A von Neumann stability analysis of a one-dimensional flux split model is used to predict the stability characteristics of the conical solver. The stability behavior of the scheme is found to strongly depend on the stage coefficients of the multistage scheme and on the order of accuracy of the upwind discretization.

Ruffin, Stephen M.↗

Artificial dissipation models for hypersonic external flow

Four artificial dissipation models which augment central difference schemes were examined for hypersonic external flows. The models were a first and third order dissipation model, a directionally scaled first and third order dissipation model, a flux limited dissipation model, and a flux difference split dissipation model. Each model was implemented in the lower-upper symmetric-Gauss-Seidel (LU-SGS) algorithm to solve the full Navier-Stokes equations. The latter two models can be regarded as total variation diminishing (TVD) schemes. Test results for model problems showed that the flux limited dissipation model was robust enough to predict a high speed blunt body flow with strong shock and expansion waves. The flux difference split dissipation model was capable of shock capturing with higher resolution, but was less robust. First and third order dissipation models turned out to be neither accurate nor robust enough for high Mach number flow computations.

Yoon, Seokkwan↗

A statistical study of ion pitch-angle distributions

Preliminary results of a statistical study of energetic (34-50 keV) ion pitch-angle distributions (PADs) within 9 Re of earth provide evidence for an orderly pattern consistent with both drift-shell splitting and magnetopause shadowing. Normal ion PADs dominate the dayside and inner magnetosphere. Butterfly PADs typically occur in a narrow belt stretching from dusk to dawn through midnight, where they approach within 6 Re of earth. While those ion butterfly PADs that typically occur on closed drift paths are mainly caused by drift-shell splitting, there is also evidence for magnetopause shadowing in observations of more frequent butterfly PAD occurrence in the outer magnetosphere near dawn than dusk. Isotropic and gradient boundary PADs terminate the tailward extent of the butterfly ion PAD belt.

Sibeck, D. G.↗

3-D plume flow computations with an upwind solver

In the present study multi-nozzle plume flows are computed with a three-dimensional, Navier-Stokes solver. Numerical simulations are performed with the flux-split, two-factor, time symptotic, viscous flow solver. The two factor splitting provides a stable three-dimensional solution procedure under ideal-gas assumptions. Viscous, ideal-gas solutions for a thin lip symmetrical nozzle are compared with experimental and numerical solutions. Computed solutions to axisymmetric and three-dimensional, multi-nozzle problems at various altitudes and flight conditions demonstrate flow field complexity and three-dimensional effects.

Venkatapathy, Ethiraj↗

A numerical study of ENO and TVD schemes for shock capturing

The numerical performance of a second-order upwind-based total variation diminishing (TVD) scheme and that of a uniform second-order essentially non-oscillatory (ENO) scheme for shock capturing are compared. The TVD scheme used is a modified version of Liou, using the flux-difference splitting (FDS) of Roe and his superbee function as the limiter. The construction of the basic ENO scheme is based on Harten, Engquist, Osher, and Chakravarthy, and the 2-D extensions are obtained by using a Strang-type of fractional-step time-splitting method. Numerical results presented include both steady and unsteady, 1-D and 2-D calculations. All the chosen test problems have exact solutions so that numerical performance can be measured by comparing the computer results to them. For 1-D calculations, the standard shock-tube problems of Sod and Lax are chosen. A very strong shock-tube problem, with the initial density ratio of 400 to 1 and pressure ratio of 500 to 1, is also used to study the behavior of the two schemes. For 2-D calculations, the shock wave reflection problems are adopted for testing. The cases presented in this report include flows with Mach numbers of 2.9, 5.0, and 10.0.

Chang, Shih-Hung↗

Design of a fast crew transfer vehicle to Mars

A final report is made on the trajectory and vehicle requirements for a fast crew transfer vehicle to Mars which will complete an Earth to Mars (and Mars to Earth) transfer in 150 days and will have a stay time at Mars of 40 days. This vehicle will maximize the crew's effectiveness on Mars by minimizing detrimental physiological effects such as bone demineralization and loss of muscle tone caused by long period exposure to zero gravity and radiation from cosmic rays and solar flares. The crew transfer vehicle discussed will complete the second half of a Split Mission to Mars. In the Split Mission, a slow, unmanned cargo vehicle, nicknamed the Barge, is sent to Mars ahead of the crew vehicle. Once the Barge is in orbit around Mars, the fast crew vehicle will be launched to rendezvous with the Barge in Mars orbit. The vehicle presented is designed to carry six astronauts for a mission duration of one year. The vehicle uses a chemical propulsion system and a nuclear power system. Four crew modules, similar to the proposed Space Station Common Modules, are used to house the crew and support equipment during the mission. The final design also includes a command module that is shielded to protect the crew during radiation events.

Source record↗

Accurate solutions, parameter studies and comparisons for the Euler and potential flow equations

Parameter studies are conducted using the Euler and potential flow equation models for steady and unsteady flows in both two and three dimensions. The Euler code is an implicit, upwind, finite volume code which uses the Van Leer method of flux vector splitting which has been recently extended for use on dynamic meshes and maintain all the properties of the original splitting. The potential flow code is an implicit, finite difference method for solving the transonic small disturbance equations and incorporates both entropy and vorticity corrections into the solution procedures thereby extending its applicability into regimes where shock strength normally precludes its use. Parameter studies resulting in benchmark type calculations include the effects of spatial and temporal refinement, spatial order of accuracy, far field boundary conditions for steady flow, frequency of oscillation, and the use of subiterations at each time step to reduce linearization and factorization errors. Comparisons between Euler and potential flow results are made, as well as with experimental data where available.

Anderson, W. Kyle↗

Impact, and its implications for geology

The publication of seminal texts on geology and on meteoritics in the 1790s, laid the groundwork for the emergence of each discipline as a modern branch of science. Within the past three decades, impact cratering has become universally accepted as a process that sculptures the surfaces of planets and satellites throughout the solar system. Nevertheless, one finds in-depth discussions of impact processes mainly in books on the Moon or in surveys of the Solar System. The historical source of the separation between meteoritics and geology is easy to identify. It began with Hutton. Meteorite impact is an extraordinary event acting instantaneously from outside the Earth. It violates Hutton's principles, which were enlarged upon and firmly established as fundamental to the geological sciences by Lyell. The split between meteoritics and geology surely would have healed as early as 1892 if the investigations conducted by Gilbert (1843-1918) at the crater in northern Arizona had yielded convincing evidence of meteorite impact. The 1950s and 1960s saw a burgeoning of interest in impact processes. The same period witnessed the so-called revolution in the Earth Sciences, when geologists yielded up the idea of fixed continents and began to view the Earth's lithosphere as a dynamic array of horizontally moving plates. Plate tectonics, however, is fully consistent with the geological concepts inherited from Hutton: the plates slowly split, slide, and suture, driven by forces intrinsic to the globe.

Marvin, Ursula B.↗

Is the Sun really a rigid rotator

Attention is drawn to observations of surface rotational bands in subgiants which indicate that a deep-seated reservoir of angular momentum must exist in these stars. This interpretation is compatible with theoretical studies of the rotational history of the Sun and Sun-like stars, but is in conflict with observations of p-mode splittings in the Sun. In order to understand better the source of this discrepancy, the predicted rotational splittings of several test rotation curves are compared to solar data.

Demarque, P.↗

Reynolds-stress and dissipation-rate budgets in a turbulent channel flow

The budgets for the Reynolds stresses and for the dissipation rate of the turbulence kinetic energy are computed using direct simulation data of a turbulent channel flow. The budget data reveal that all the terms in the budget become important close to the wall. For inhomogeneous pressure boundary conditions, the pressure-strain term is split into a return term, a rapid term, and a Stokes term. The Stokes term is important close to the wall. The rapid and return terms play different roles depending on the component of the term. A split of the velocity pressure-gradient term into a redistributive term and a diffusion term is proposed, which should be simpler to model. The budget data is used to test existing closure models for the pressure-strain term, the dissipation rate, and the transport rate. In general, further work is needed to improve the models.

Mansour, N. N.↗

On the possibility of detecting weak magnetic fields in variable white dwarfs

It is suggested that 'weak' magnetic fields of strengths less than 10 to the 6th G may be detectable in some variable white dwarfs. Weak fields can cause subtle changes in the Fourier power spectra of these stars in the form of 'splitting' in frequency of otherwise degenerate signals. Present-day observational and analysis techniques are capable of detecting these changes. It is suggested suggested, by listing some well-studied candidate stars, that perhaps the magnetic signature of splitting has already been observed in at least one object and that the difficult task of intensive measurements of weak fields should now be undertaken of those candidates.

Jones, Philip W.↗