Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

New determinations of far-side lunar radii from Apollo photography

Determinations of far side lunar radii based on the reduction of photogrammetric measurements derived from Apollo 16 photographs obtained during the trans-earth phase of the spacecraft trajectory are presented. Reduction is accomplished by determining the Apollo 16 metric camera orientation relative to control points on the lunar surface whose coordinates are known exactly, than charting the surface on the basis of data coverage. The positions of 66 surface features in the area between longitudes 90 and 130 deg E and 10 and 60 deg N relative to the center of mass of the moon, with a relative accuracy of 500 km, are presented. A topographical map which can resolve basin-sized features has been derived from radius determinations. It is found that the craters Fabry, Riemann and Szilard comprise a topographically depressed region about 500 km in diameter with a floor 2.4 to 3.4 km below the 1730.0 km reference sphere and 4.8 to 5.8 km below the northern rim of the unfilled basin.

Mohan, S. N.↗

Operando Raman spectroscopy uncovers hydroxide and CO species enhance ethanol selectivity during pulsed CO 2 electroreduction

Pulsed CO 2 electroreduction (CO 2 RR) has recently emerged as a facile way to in situ tune the product selectivity, in particular toward ethanol, without re-designing the catalytic system. However, in-depth mechanistic understanding requires comprehensive operando time-resolved studies to identify the kinetics and dynamics of the electrocatalytic interface. Here, we track the adsorbates and the catalyst state of pre-reduced Cu 2 O nanocubes (~30 nm) during pulsed CO 2 RR using sub-second time-resolved operando Raman spectroscopy. By screening a variety of product-steering pulse length conditions, we unravel the critical role of co-adsorbed OH and CO on the Cu surface next to the oxidative formation of Cu-O ad or CuO x /(OH) y species, impacting the kinetics of CO adsorption and boosting the ethanol selectivity. However, a too low OH ad coverage following the formation of bulk-like Cu 2 O induces a significant increase in the C 1 selectivity, while a too high OH ad coverage poisons the surface for C-C coupling. Thus, we unveil the importance of co-adsorbed OH on the alcohol formation under CO 2 RR conditions and thereby, pave the way for improved catalyst design and operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

IEEE 802.16J-Relay Fortified Aeromacs Networks; Benefits and Challenges

Aeronautical Mobile Airport Communications System (AeroMACS) is an IEEE 802.16 standard-based (WiMAX) broadband aviation transmission technology, developed to provide safety critical communications coverage for airport surface in support of fixed and mobile ground to ground applications and services. We have previously demonstrated that IEEE 802.16j-amendment-based WiMAX is most feasible for AeroMACS applications. The principal argument in favor of application of IEEE 802.16j technology is the flexible and cost effective extension of radio coverage that is afforded by relay fortified WiMAX networks, with virtually no increase in the power requirements. In this article, following introductory remarks on airport surface communications, WiMAX and AeroMACS; the IEEE 802.16j-based WiMAX technology and multihop relay systems are briefly described. The two modes of relay operation supported by IEEE 802.16j amendment; i.e., transparent (TRS) and non-transparent (NTRS) modes, are discussed in some detail. Advantages and disadvantages of using TRS and NTRS in AeroMACS networks are summarized in a table. Practical issues vis--vis the inclusion of relays in AeroMACS networks are addressed. It is argued that the selection of relay type may affect a number of network parameters. A discussion on specific benefits and challenges of inclusion of relays in AeroMACS networks is provided. The article concludes that in case it is desired or necessary to exclusively employ one type of relay mode for all applications throughout an AeroMACS network, the proper selection would be the non-transparent mode.

Networks↗

Adsorption and Formation of BaO Overlayers on Gamma-Al2O3 Surfaces

First-principles density functional theory slab calculations were used to investigate adsorption, clustering and overlayer formation of BaO on the gamma-Al2O3 surfaces. Multiple stable adsorption configurations were identified for the adsorbed BaO molecule and (BaO)2 on both (100) and (110) surfaces of gamma-Al2O3. Adsorption of BaO and (BaO)2 induces significant relaxation of the gamma-Al2O3 surfaces. At high BaO coverage, up to the ratio of BaO units to surface Al atoms being unity, the adsorbed BaO molecules were organized to form a buckled monolayer-like overlayer on the surface. Aggregation energy was used to characterize the organization of adsorbed BaO on the surface. Our results showed that the initial BaO adsorption configuration had a strong effect on clustering and overlayer formation. A weakly adsorbed BaO molecule will thermodynamically favor clustering over being isolated. On the fully dehydrated gamma-Al2O3(100) surface, the formation of BaO overlayer was thermodynamically unfavorable until 4.26 BaO/nm2 if the additional BaO was from the most stable site, corresponding to a low BaO loading, whereas aggregation became favorable if the additional BaO was from less stable sites, corresponding to a high BaO loading. On the fully dehydrated gamma-Al2O3(110) surface, the formation of a BaO dimer was found to have the highest energy cost. On the other hand, the presence of hydroxyls on the surface enhances the stability of the adsorbed BaO molecules. As such, isolated BaO islands, rather than a complete BaO overlayer, were expected on the hydroxylated gamma-Al2O3 surfaces, consistent with recent experimental observations. Pacific Northwest National Laboratory operated by Battelle for the U. S. Department of Energy.

36 MATERIALS SCIENCE↗

Named Venusian craters

Schaber et al. compiled a database of 841 craters on Venus, based on Magellan coverage of 89 percent of the planet's surface. That database, derived from coverage of approximately 98 percent of Venus' surface, has been expanded to 912 craters, ranging in diameter from 1.5 to 280 km. About 150 of the larger craters were previously identified by Pioneer Venus and Soviet Venera projects and subsequently formally named by the International Astronomical Union (IAU). Altogether, the crater names submitted to the IAU for approval to date number about 550, a little more than half of the number of craters identified on Magellan images. The IAU will consider more names as they are submitted for approval. Anyone--planetary scientist or layman--may submit names; however, candidate names must conform to IAU rules. The person to be honored must be deceased for at least three years, must not be a religious figure or a military or political figure of the 19th or 20th century, and, for Venus, must be a woman. All formally and provisionally approved names for Venusian impact craters, along with their latitude, longitude, size, and origin of their name, will be presented at LPSC and will be available as handouts.

Russell, Joel F.↗

Emergent Behavior at the Calcite–Water Interface during Reactive Transport in a Simple Microfluidic Channel

Geochemical reactive transport processes in natural mineral-fluid systems may produce a wide array of emergent phenomena that are difficult to predict from basic principles and to reproduce in model systems. In this study, we present experimental results obtained from a simple microfluidic system with which we explored the consequences of reacting the calcite (104) cleavage surface with an acidic Pb-bearing solution (pH = 3.5, [Pb] total = 5 mM) as a function of flow rate. This system is relevant to passive remediation systems for Pb-rich acid mine drainage. We observed periodic banding in the amounts of Pb sorption at flow velocities ≥ 926 μm s -1 , where the band spacing was spatially correlated with the amount of calcite dissolution and the development of micropyramidal topography on the calcite (104) surface. The equivalent coverage of Pb deposited in these Pb-rich bands was at least several monolayers per unit cell, yet there was no evidence for precipitation of any secondary Pb phase implying incorporation of Pb within the near-surface calcite lattice. We also observed spatial variations in nucleation and growth of euhedral secondary Pb-carbonate minerals hydrocerusite and cerussite at flow rates ≤ 278 μm s -1 ,. These findings demonstrate potential for exploiting the rich phenomenology afforded by the interplay among transport phenomena and chemical kinetics in experimental systems designed to yield deeper insights into geochemical self-organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate/Concentration Kinetic Petals: A Transient Method to Examine the Interplay of Surface Reaction Processes

Transient pulse response experiments are used to construct rate/concentration (RC) kinetic dependencies—RC petals—and provide a new method to distinguish the timing and interplay of adsorption, surface reaction, and product formation on complex (industrial) materials. A petal shape arises as the dynamic “reaction-diffusion” experiment forces the concentration and reaction rate to return to zero. In contrast to the typical steady-state “Langmuir-type” RC dependence, RC petals have two branches, which arise as a result of decoupled gas and surface concentrations in the non-steady-state regime. To demonstrate this approach, the characteristics of petal shapes using ammonia decomposition as a probe reaction are presented. Ammonia, hydrogen, and nitrogen transformation rates are compared on three simple materials: Fe, Co, and a bimetallic CoFe preparation when ammonia is pulsed at 550°C in a low-pressure diffusion reactor. All materials demonstrate a two-branch kinetic RC dependence for ammonia adsorption, and rate constants are quantified in the low-coverage regime. We found that H 2 and N 2 product formation was dependent on the concentration of surface intermediates for all materials with one exception: for Co, an additional fast hydrogen generation process was observed; the rate of which coincided with ammonia adsorption. Nitrogen generation was only significant for CoFe and Co and on the CoFe catalyst, a self-inhibition property was observed. A method for estimating the number of active sites based on the RC petals is presented and was applied to the Fe and CoFe samples. The surface coverage and rate of formation/conversion of surface intermediates are interpreted from the examination of shape characteristics of the RC petals for each material.

36 MATERIALS SCIENCE↗

A Perfect View of Vesta: Creating Pointing Observations for the Dawn Spacecraft on Asteroid 4 Vesta

The Dawn spacecraft has a timely and clever assignment in store. It will take a close look at two intact survivors from the dawn of the solar system (asteroids 4 Vesta and 1 Ceres) to understand more about solar system origin and evolution. To optimize science return, Dawn must make carefully designed observations on approach and in survey orbit, high altitude mapping orbit, and low altitude mapping orbit at each body. In this report, observations outlined in the science plan are modeled using the science opportunity analyzer program for the Vesta encounter. Specifically, I encoded Dawn's flight rules into the program, modeled pointing profiles of the optical instruments (framing camera, visible infrared spectrometer) and mapped their fields of view onto Vesta's surface. Visualization of coverage will provide the science team with information necessary to assess feasibility of alternative observation plans. Dawn launches in summer 2006 and ends its journey in 2016. Instrument observations on Vesta in 2011 will supply detailed information about Vesta's surface and internal structure. These data will be used to analyze the formation and history of the protoplanet and, therefore, complete an important step in understanding the development of our solar system.

Hay, Katrina M.↗

Factors influencing quantum evaporation of helium from polar semiconductors from first principles

While there is much indirect evidence for the existence of dark matter (DM), to date it has evaded detection. Current efforts focus on DM masses over ~GeV—to push the sensitivity of DM searches to lower masses, new DM targets and detection schemes are needed. In this work, we focus on the latter—a novel detection scheme recently proposed to detect 10–100 meV phonons in polar target materials. Previous work showed that well-motivated models of DM can interact with polar semiconductors to produce an athermal population of phonons. This new sensing scheme proposes that these phonons then facilitate quantum evaporation of 3 He from a van der Waals film deposited on the target material. However, a fundamental understanding of the underlying process is still unclear, with several uncertainties related to the precise rate of evaporation and how it can be controlled. In this work, we use ab initio density functional theory calculations to compare the adsorption energies of helium atoms on a polar target material, sodium iodide, to understand the underlying evaporation physics. We explore the role of surface termination, monolayer coverage, and elemental species on the rate of He evaporation from the target material. Using this, we discuss the optimal target features for He-evaporation experiments and their range of tunability through chemical and physical modifications such as applied field and surface termination.

36 MATERIALS SCIENCE↗

Windsat Validation Using Seawinds, Windrad and POLSCAT Measurements

Global mapping of near surface ocean wind vectors is crucial for many oceanographic and atmospheric studies. The US Navy together with the National Polar Orbiting Environmental Satellite System (NPOESS) launched the Windsat with multi-frequency polarimetric radiometers in January 2003 to demonstrate the passive polarimetry for large spatial coverage of ocean surface wind vector measurements from space. We derived the geophysical model function (GMF) for Windsat polarimetric brightness temperature measurements using six months of matchup dataset. The Windsat GMF was compared with the aircraft radiometer and radar measurements and the SeaWinds scatterometer winds with good agreement up to about 20 m/s wind speed.

scatterometer↗

Evidence for anti-synergism between ion-assisted etching and in-plasma photoassisted etching of silicon in a high-density chlorine plasma

Etching of p-Si in 60 mTorr 10%Cl2/90%Ar Faraday-shielded inductively coupled high density plasmas was investigated under both ionassisted etching (IAE) and photoassisted etching (PAE) conditions. Real-time etching rates and after-etching Si surface chemical compositions were obtained by laser interferometry and vacuum-transfer x-ray photoelectron spectroscopy (XPS), respectively. Precisely controlled ion energy distributions (IEDs) were generated by applying pulsed negative DC bias on the conductive sample stage. Above a 36 eV threshold at a total flow rate of 250 SCCM, the IAE rate increased with the square root of the ion energy. In contrast to the DC bias, etching under RF bias did not exhibit a threshold ion energy because of the wide IED. XPS spectra revealed that the surface layer under PAE conditions had a significantly lower chlorine content, composed of only SiCl. Under IAE conditions, however, silicon dangling bonds (Si•), SiCl 2 , and SiCl 3 were found on the surface, in addition to SiCl, with a relative abundance of SiCl > SiCl 2 , and SiCl 3 . The absence of higher chlorides and Si• under PAE conditions suggested that vacuum ultraviolet photons and above threshold-energy ions interact with the surface very differently. By varying the duty cycle of the pulsed DC bias, it was found that the IAE rate scaled with the energetic ion dose, but only for low duty cycles. For higher duty cycles, the apparent IAE yield fell off with an increasing Cl coverage on the surface, as the duty cycle went up, which pointed to a negative synergy (antisynergism) between PAE and IAE as the explanation. This antisynergism was further supported by the observed decrease of the total etching rate with an increasing period of the pulsed DC bias. A plausible mechanism is that increasing the pulsing period causes more near-surface damage, creating more recombination centers that lead to a higher loss rate of electron-hole pairs through recombination, thereby reducing the PAE rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adsorption of ethane, ethene, and ethyne on reconstructed Fe 3 O 4 (001)

The adsorption of the C2 hydrocarbons including ethane, ethene, and ethyne are studied on magnetite Fe 3 O 4 (001) by a combination of molecular beam dosing, temperature programmed desorption, and X-ray photoelectron spectroscopy. The ethane desorption profile has a single temperature invariant peak at 100 K while ethene and ethyne exhibit additional peaks at ~120 K and ~135 K. An inversion analysis is used to extract coverage dependent desorption energies as well as coverage-averaged prefactors for each molecule. Ethene and ethyne exhibit moderate coverage dependent desorption energies decreasing from ~80 to ~30 kJ/mol at saturation while ethane shows a relatively coverage invariant desorption energy ~28 kJ/mol. The desorption energies of the C2 hydrocarbons increase in order of increasing bond order. This is likely due to the enhanced interaction of the ethene and ethyne p system to the coordinatively unsaturated octahedral Fe sites (Fe oct ) on the ¬oxide surface. The saturation coverages of each C2 hydrocarbon at 82 K were also determined. Furthermore, these match well with the 2-dimensional spacing determined from their liquid densities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sorption of Arsenate, Selenate, and Molybdate on the Barite (001) Surface

Interactions of ions with ionically bonded minerals such as barite (BaSO 4 ) influence the fate and transport of the ions, while the factors that control the sorption of toxic oxyanions on barite remain elusive. In this study, the sorption of arsenate, selenate, and molybdate on the barite (001) surface was examined at pH ~5 using in situ crystal truncation rod analysis, resonant anomalous X-ray reflectivity, and atomic force microscopy. The results show that arsenate and selenate mainly incorporate into the top monolayer of barite, while molybdate primarily adsorbs above the surface. The sorption coverage of arsenate is greater (by ~100%) than that of selenate but similar to that of molybdate. The different incorporation coverages between arsenate and selenate can be explained by their different protonation states at pH 5. The incorporated arsenate may be stabilized by hydrogen bonds between arsenate and oxygen atoms of neighboring sulfate compared to selenate, which exists predominantly in the deprotonated state. The adsorption of molybdate above the surface probably stems from a surface-induced oligomerization, as the anion and the oligomer may be too large for incorporation. Our observation of these different sorption mechanisms demonstrates how the physicochemical properties of the anions control the selective uptake of the toxic metals on the dominant surface of the ionically bonded mineral barite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An initial phase of Ge hut array formation at low temperature on Si(001)

We report a direct STM observation of Ge hut array nucleation on the Si(001) surface during ultrahigh vacuum molecular-beam epitaxy at 360 deg. C. Nuclei of pyramids and wedges have been observed on the wetting layer MxN patches starting from the coverage of about 5.1 A ({approx}3.6 ML). Further development of hut arrays consists of simultaneous growth of the formerly appeared clusters and nucleation of new ones resulting in gradual rise of hut number density with increasing surface coverage. Huts nucleate reconstructing the patch surface from the usual c(4x2) or p(2x2) structure to one of two recently described formations composed by epitaxially oriented Ge dimer pairs and chains of four dimers.

36 MATERIALS SCIENCE↗

Surface Magnetism of Cobalt Nanoislands Controlled by Atomic Hydrogen

Controlling the spin states of the surface and interface is key to spintronic applications of magnetic materials. We report the evolution of surface magnetism of Co nanoislands on Cu(111) upon hydrogen adsorption and desorption with the hope of realizing reversible control of spin-dependent tunneling. Spin-polarized scanning tunneling microscopy reveals three types of hydrogen-induced surface superstructures, 1H-(2 × 2), 2H-(2 × 2), and 6H-(3 × 3), with increasing H coverage. The prominent magnetic surface states of Co, while being preserved at low H coverage, become suppressed as the H coverage level increases, which can then be recovered by H desorption. First-principles calculations reveal the origin of the observed magnetic surface states by capturing the asymmetry between the spin-polarized surface states and identify the role of hydrogen in controlling the magnetic states. This study offers new insights into the chemical control of magnetism in low-dimensional systems.

36 MATERIALS SCIENCE↗

Isopotential Electron Titration: Hydrogen Adsorbate-Metal Charge Transfer

The extent of charge transfer between an adsorbate and thermocatalytic surface plays a key role in determining catalytic activity, but direct and quantitative measures have remained elusive. Here, we report the method of isopotential electron titration (IET), an approach that directly measures charge transfer between adsorbates and catalytic surfaces. Charge transfer between Pt and adsorbed hydrogen adatoms was investigated using a catalytic condenser, where the Pt surface was separated from a p-type silicon layer by a hafnia dielectric film. By forcing the Pt and Si layers into isopotential conditions, charge transfer between the adsorbate and Pt surface was titrated through an external circuit. Hydrogen atoms donated electrons to Pt upon adsorption, which was quantitatively reversed upon desorption. Across a temperature range of 125–200 °C (surface hydrogen fractional coverages of 80–100%), the charge transferred to Pt by an adsorbed hydrogen atom was measured to be 0.19 ± 0.01% |e|/H. Bader charge analysis of the extent of charge transfer was in agreement with experimental measurements, with a calculated net donation of 0.4% |e|/H. The ability to experimentally quantify surface charge transfer provides an electronic-based approach to characterize catalytic surfaces, the adsorbed moieties residing on them, and the chemical reactions they accelerate.

Adsorption↗

Submonolayer adsorption of Na onto the Cu(110) surface: Structure and vibrational properties

The submonolayer adsorption of Na onto the Cu(110) surface is studied. At small Na coverages (Θ = 0.16–0.25 ML), the substrate surface subjected to missing-row reconstruction (1 × 2) is shown to be most stable dynamically. When the coverage increases to Θ = 0.5 ML, the unreconstructed substrate surface with a c(2 × 2) sodium adlayer becomes dynamically stable. For an analysis, we used data on the equilibrium atomic configuration, the adsorption energy, the phonon spectra, the local density of phonon states, and the polarization of localized vibrational modes. All calculations were performed using the interatomic potentials obtained in terms of the embedded-atom method. The calculated frequencies of localized vibrational modes agree well with the existing experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decomposition of Furan on Pd(111)

Periodic density functional theory calculations (GGA-PBE) have been performed to investigate the mechanism for the decomposition of furan up to CO formation on the Pd(111) surface. At 1/9 ML coverage, furan adsorbs with its molecular plane parallel to the surface in several states with nearly identical adsorption energies of -1.0 eV. The decomposition of furan begins with the opening of the ring at the C-O position with an activation barrier of E{sub a} = 0.82 eV, which yields a C{sub 4}H{sub 4}O aldehyde species that rapidly loses the {alpha} H to form C{sub 4}H{sub 3}O (E{sub a} = 0.40 eV). C{sub 4}H{sub 3}O further dehydrogenates at the {delta} position to form C{sub 4}H{sub 2}O (E{sub a} = 0.83 eV), before the {alpha}-{beta} C-C bond dissociates (E{sub a} = 1.08 eV) to form CO. Each step is the lowest-barrier dissociation step in the respective species. A simple kinetic analysis suggests that furan decomposition begins at 240-270 K and is mostly complete by 320 K, in close agreement with previous experiments. It is suggested that the C{sub 4}H{sub 2}O intermediate delays the decarbonylation step up to 350 K.

36 MATERIALS SCIENCE↗