Search NASA⌕ Search

SEARCH · Search NASA

Results for “ULTRAVIOLET SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Effect of compressive stress on stability of N-doped p-type ZnO

Nitrogen-doped p-type zinc oxide (p-ZnO:N) thin films were fabricated on a-/c-plane sapphire (a-/c-Al{sub 2}O{sub 3}) by plasma-assisted molecular beam epitaxy. Hall-effect measurements show that the p-type ZnO:N on c-Al{sub 2}O{sub 3} degenerated into n-type after a preservation time; however, the one grown on a-Al{sub 2}O{sub 3} showed good stability. The conversion of conductivity in the one grown on c-Al{sub 2}O{sub 3} ascribed to the faster disappearance of N{sub O} and the growing N{sub 2(O)}, which is demonstrated by x-ray photoelectron spectroscopy (XPS). Compressive stress, caused by lattice misfit, was revealed by Raman spectra and optical absorption spectra, and it was regarded as the root of the instability in ZnO:N.

36 MATERIALS SCIENCE↗

Ellipsometrically determined optical properties of nickel-containing tungsten oxide thin films: Nanostructure inferred from effective medium theory

Films of Ni{sub x}W{sub 1-x} oxide with 0.05 {<=} x {<=} 0.53 were produced by reactive dc magnetron co-sputtering onto Si. Such films have documented electrochromism. Spectroscopic ellipsometry was used to extract accurate data on the dielectric function in the photon range 0.062 to 5.62 eV. The results for 0.62 to 5.62 eV were compared with computations from the Bruggeman effective medium theory applied to two nanostructural models: one representing a random mixture of structural entities characterized by the dielectric functions of WO{sub 3} and NiWO{sub 4} and the other describing a random mixture of WO{sub 3} and NiO. Unambiguous evidence was found in favor of the former model, and hence the films are composed of nanosized tungsten oxide and nickel tungstate. This agrees excellently with an earlier investigation of ours on Ni{sub x}W{sub 1-x} oxide films, where nanostructure was inferred from Raman spectroscopy, x-ray photoelectron spectroscopy, and x-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray diffraction, FTIR, UV-VIS and SEM studies on chromium (III) complexes

Five Chromium (III) complexes have been prepared using Schiff base ligands which derived from benzoin and five different amino acids (H{sub 2}N-R). Samples were characterized by XRD, FTIR, UV-VIS and SEM method. X-Ray diffraction pattern analyzed that all chromium (III) complexes have hexagonal structure and crystalline, in nature, using Bruker D8 Advance instrument. Using VERTAX 70, FTIR spectroscopy reveals that Samples have (C=N), (C-O), (M-N) and (M-O) bonds in the range of 4000-400cm{sup −1}. UV-VIS spectroscopy give information that samples absorb the visible light which is in the range of 380-780nm. For this, Lambda 960 spectrometer used. SEM is designed for studying of the solid objects, using JEOL JSM 5600 instrument.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Organic Compounds Produced by Photolysis of Realistic Interstellar and Cometary Ice Analogs Containing Methanol

The InfraRed (IR) spectra of UltraViolet (UV) and thermally processed, methanol-containing interstellar / cometary ice analogs at temperatures from 12 to 300 K are presented. Infrared spectroscopy, H-1 and C-13 Nuclear Magnetic Resonance (NMR) spectroscopy, and gas chromatography-mass spectrometry indicate that CO (carbon monoxide), CO2 (carbon dioxide), CH4 (methane), HCO (the formyl radical), H2CO (formaldehyde), CH3CH2OH (ethanol), HC([double bond]O)NH2 (formamide), CH3C([double bond]O)NH2 (acetamide), and R[single bond]C[triple bond]N (nitriles) are formed. In addition, the organic materials remaining after photolyzed ice analogs have been warmed to room temperature contain (in rough order of decreasing abundance), (1) hexamethylenetetramine (HMT, C6H12N4), (2) ethers, alcohols, and compounds related to PolyOxyMethylene (POM, ([single bond]CH2O[single bond](sub n)), and (3) ketones (R[single bond]C([double bond]O)[single bond]R') and amides (H2NC([double bond]O)[single bond]R). Most of the carbon in these residues is thought to come from the methanol in the original ice. Deuterium and C-13 isotopic labeling demonstrates that methanol is definitely the source of carbon in HMT. High concentrations of HMT in interstellar and cometary ices could have important astrophysical consequences. The ultraviolet photolysis of HMT frozen in H2O ice readily produces the 'XCN' band observed in the spectra of protostellar objects and laboratory ices, as well as other nitriles. Thus, HMT may be a precursor of XCN and a source of CN in comets and the interstellar medium. Also, HMT is known to hydrolyze under acidic conditions to yield ammonia, formaldehyde, and amino acids. Thus, HMT may be a significant source of prebiogenic compounds on asteroidal parent bodies. A potential mechanism for the radiative formation of HMT in cosmic ices is outlined.

Bernstein, Max P.↗

Echelle spectra image processing for the International Ultraviolet Explorer

This paper presents the techniques needed to convert the International Ultraviolet Explorer (IUE) high-resolution echelle spectra into useful scientific data. The image is obtained with a digitally controlled vidicon camera system. The processes that must be carried out on the image include: noise removal, correction for geometric and optical distortion, nonuniform photometric corrections, and two-dimensional wavelength determination. Results from the breadboard camera system are presented.

Klinglesmith, D. A.↗

Ultraviolet and optical spectroscopy of Cn 1-1 (= HDE 330036)

Ultraviolet and optical spectra of Cn 1-1 are presented. This stellar object has strong emission lines superposed on the absorption spectrum of an F5 III-IV star. It has been called both a symbolic star and a planetary nebula. Optical spectra taken over a period of two years do not show any variations in radial velocities. The radial velocities of the absorptionand emission-line spectra appear to be the same. The ultraviolet and optical spectra did not show variations in appearance over the period of observations. The interstellar extinction and distance are estimated by various methods, and values of c = 0.4 and d = 450 pc are adopted. The emission-line region is characterized by high-electron density and temperature and by enhancements over solar values in C/O and N/O. It is proposed that Cn 1-1 is a dense planetary nebula involved in a binary system. If so, the enhancements in abundances derived from the observations suggest that the planetary nebula is associated with a relatively massive progenitor star.

Lutz, J. H.↗

Structural and spectroscopic characterization of Mo{sub 1-x}W{sub x}O{sub 3-{delta}} mixed oxides

Mo{sub 1-x}W{sub x}O{sub 3} oxides with different cationic fraction (x=0.2, 0.5 and 0.8) and, for comparison purposes, pure MoO{sub 3} and WO{sub 3} were prepared. Along with textural and structural characterizations, absorbance FT-IR, diffuse reflectance UV-vis-NIR and EPR spectroscopies were employed to study the changes in the electronic properties of these materials passing from Mo{sub 1-x}W{sub x}O{sub 3} in oxidizing atmosphere to Mo{sub 1-x}W{sub x}O{sub 3-{delta}} in reducing conditions. XRD analysis showed that the Mo-W mixed oxides are constituted by two or three crystalline phases, whose abundance and composition are well characterized by structural refinement with the Rietveld method. Only the sample with the highest Mo content (x=0.2) shows a predominant mixed phase and also a superior ability to lose oxygen with respect to the other mixed oxides. The oxygen loss in the reduced oxides induces the formation of defects with electronic levels in the band gap of the material, in particular, electrons trapped in oxygen vacancies and/or at cationic sites (polarons). While the nature of defect sites induced in the mixed and in the pure oxides is similar, the photo-ionization energies, the ratio between surface and bulk defects and the stability of the defects in oxygen at increasing temperature are peculiar of each mixed oxide. - Graphical abstract: The combined use of different techniques provides new insight into structural, optical and electronic properties of semiconductor Mo{sub 1-x}W{sub x}O{sub 3-{delta}} mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calcium-doped ceria/titanate tabular functional nanocomposite by layer-by-layer coating method

Ca-doped ceria (CDC)/tabular titanate (K{sub 0.8}Li{sub 0.27}Ti{sub 1.73}O{sub 4}, TT) UV-shielding functional nanocomposite with fairly uniform CDC coating layers was prepared through a polyelectrolyte-associated layer-by-layer (LbL) coating method. TT with lepidocrocite-like layered structure was used as the substrate, poly (diallyldimethylammonium chloride) (PDDA) was used as a coupling agent, CDC nanoparticles were used as the main UV-shielding component. CDC/TT nanocomposites with various coating layers of CDC were obtained through a multistep coating process. The phases were studied by X-ray diffraction. The morphology and coating quality were studied by scanning electron microscopy and element mapping of energy dispersive X-ray analysis. The oxidation catalytic activity, UV-shielding ability and using comfort were characterized by Rancimat test, UV-vis spectra and dynamic friction test, respectively. CDC/TT nanocomposites with low oxidation catalytic activity, high UV-shielding ability and good using comfort were finally obtained. - Graphical abstract: Through the control of surface charge of particles calcium-doped ceria/titanate composites with low oxidation catalytic activity, higher UV-shielding ability and excellent comfort was obtained by a facile layer-by-layer coating method.

36 MATERIALS SCIENCE↗

Electrosprayed polyaniline as cathode material for lithium secondary batteries

Doped polyaniline with LiPF{sub 6} is electrosprayed onto aluminum foil using electrospinning technique, and evaluated as cathode active material for application in room-temperature lithium batteries. Doping level is characterized using FTIR and UV-vis spectroscopy. In FTIR Spectra, characteristic peaks of PANI are shifted to lower bands as a result of doping which indicates the effectiveness of doping. Doping level is also confirmed by UV-vis spectra. Surface morphology of the cathode is studied using scanning electron microscope. Electrochemical evaluation of the cell using electrosprayed PANI as cathode show good cycling properties. The cell delivers a high discharge value of 142.5 mAh/g which is about 100% of theoretical capacity, and the capacity is lowered during cycle and reached 61% of theoretical capacity after 50 cycles. The cell delivers a stable but lower discharge capacity at higher C-rates.

36 MATERIALS SCIENCE↗

Photolysis of n-butyl nitrite and isoamyl nitrite at 355 nm: A time-resolved Fourier transform infrared emission spectroscopy and ab initio study

We report on the photodissociation dynamics study of n-butyl nitrite and isoamyl nitrite by means of time-resolved Fourier transform infrared (TR-FTIR) emission spectroscopy. The obtained TR-FTIR emission spectra of the nascent NO fragments produced in the 355 nm laser photolysis of the two alkyl nitrite species showed an almost identical rotational temperature and vibrational distributions of NO. In addition, a close resemblance between the two species was also found in the measured temporal profiles of the IR emission of NO and the recorded UV absorption spectra. The experimental results are consistent with our ab initio calculations using the time-dependent density functional theory at the B3LYP/6-311G(d,p) level, which indicate that the substitution of one of the two {gamma}-H atoms in n-C{sub 4}H{sub 9}ONO with a methyl group to form (CH{sub 3}){sub 2}C{sub 3}H{sub 5}ONO has only a minor effect on the photodissociation dynamics of the two molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geometries, Electronic Structures, And Spectral Properties Of Some Metal Free Phthalonitrile Derivatives For Enhancement Of The Dye Sensitized Solar Cells

New technologies for direct solar energy conversion have gained more attention in the last few years. In particular, Dye Sensitized Solar Cells (DSSCs) are promising in terms of efficiency and low cost [1,2]. Benefited from systematic device engineering and continuous material innovation, a state of the art DSC with a ruthenium sensitizer has achieved a validated efficiency of 11.1%[3] measured under the air mass 1.5 global (AM1.5G) conditions.The optimized geometries of the 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are shown in Fig. 1(a). The frontier molecular orbitals (MO) energies of the dyes 3, 4 Pyridinedicarbonitrile, 3-Nitrophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are shown in Fig. 1(b). The HOMO-LUMO gap of the dye 3, 4 Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile in vacuum is 5.96 eV, 5.54 eV, 5.57 eV, 5.76 eV respectively. The geometries, electronic structures, polarizabilities, and hyperpolarizabilities of dyes 3, 4-Pyridinedicarbonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile were studied by using density functional theory with hybrid functional B3LYP, and the UV-Vis spectra were investigated by using TDDFT methods. The NBO results suggest that 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile 4-Aminophthalonitrile and 4-Methylphthalonitrile are all (D-pi-A) systems. The calculated isotropic polarizability of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is. 85.76, 112.72, 26.63 and 115.13 a.u., respectively. The calculated polarizability anisotropy invariant of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is 74.451, 83.533, 62.653 and 88.526 a.u., respectively. The hyperpolarizabilities of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is 0.80628, 5.60646, 7.7979 and 1.86216 (in a.u.), respectively. The frequencies of strongest IR absorption for 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are 1614 cm{sup -1}, 290 cm{sup -1}, 387 cm{sup -1} and 846 cm{sup -1} and the frequencies of strongest Raman activity for 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are 2345 cm{sup -1}, 2338 cm{sup -1},2329 cm{sup -1}, 2337cm{sup -1}, respectively. The electronic absorption spectral features in visible and near-UV region were assigned based on the qualitative agreement to TDDFT calculations. The absorptions are all ascribed to {pi}{yields}{pi}* transition. The three excited states with the lowest excited energies of 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile are photoinduced electron transfer processes that contributes sensitization of photo-to-current conversion processes. The interfacial electron transfer between semiconductor TiO{sub 2} electrode and dye sensitizer 3, 4- Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile is electron injection process from excited dyes as donor to the semiconductor conduction band. Based on the comparative analysis of geometries, electronic structures, and spectrum properties between 3, 4-Pyridinedicarbonitrile, 3-Aminophthalonitrile, 4-Aminophthalonitrile and 4-Methylphthalonitrile the role of amide and methyl groups in phthalonitrile is as follows: it enlarged the distance between electron donor group and semiconductor surface, and decreased the timescale of the electron injection rate, resulted in giving lower conversion efficiency. This indicates that the choice of the appropriate conjugate bridge in dye sensitizer is very important to enhance the performance of DSSC.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Field Emission From The Gold- Polyaniline (Au-PANI) Nanocomposite

The gold-polyaniline nanocomposite was synthesized by electrochemical route in two steps. In the first step polyaniline film was deposited by cyclic voltammetry on the ITO coated glass substrate, and then synthesis of gold-polyaniline nanocomposite via chronoamperometry. The synthesized gold-polyaniline nanocomposite film was characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), Ultra-violet spectroscopy (UV-vis) and Fourier Transform Infrared Spectrometry (FTIR). The SEM analysis shows well adherent gold nanoparticles on the surface of polyaniline nanofibers. The XRD and UV-Vis spectra indicate formation of gold nanoparticles. From the field emission studies, the value of the turn on field, corresponding to 1 nA emission current, is found to be 0.65 V/{mu}m and emission current density of 1 {mu}A/cm{sup 2} has been drawn at an applied field of 1.1 V/{mu}m. These values are observed to be superior than the reported ones. The field emission current stability investigated at 1 {mu}A over duration of more than four hours is found to be good. The observed field emission characteristics suggest the gold polyaniline nanocomposite as promising material for field emission based applications.

36 MATERIALS SCIENCE↗

Infrared/ultraviolet quadruple resonance spectroscopy to investigate structures of electronically excited states

Molecular beam investigations in combination with IR/UV spectroscopy offer the possibility to obtain structural information on isolated molecules and clusters. One of the demanding tasks is the discrimination of different isomers, e.g., by the use of isomer specific UV excitations. If this discrimination fails due to overlaying UV spectra of different isomers, IR/IR methods offer another possibility. Here, we present a new IR/UV/IR/UV quadruple resonance technique to distinguish between different isomers especially in the electronically excited state. Due to the IR spectra, structural changes and photochemical pathways in excited states can be assigned and identified. The method is applied to the dihydrated cluster of 3-hydroxyflavone which has been investigated as photochemically relevant system and proton wire model in the S{sub 1} state. By applying the new IR/UV/IR/UV technique, we are able to show experimentally that both in the electronic ground (S{sub 0}) and the electronically excited state (S{sub 1}) two isomers have to be assigned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic and antibacterial properties of Au-TiO{sub 2} nanocomposite on monolayer graphene: From experiment to theory

The formation of the Au-TiO{sub 2} nanocomposite on monolayer Graphene (GTA) by sequentially depositing titanium dioxide particles and gold nanoparticles on graphene sheet was synthesized and analyzed in our work. The structural, morphological, and physicochemical properties of samples were thoroughly investigated by UV-Vis spectrophotometer, Raman spectroscopy, Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscope, and transmission electron microscope. Photocatalytic performance of GTA, graphene (GR), TiO{sub 2,} and TiO{sub 2} -graphene nanocomposite (GT) were comparatively studied for degradation of methyl orange, and it was found that GTA had highest performance among all samples. More importantly, antibacterial performance of this novel composite against Gram-positive bacteria, Gram-negative bacteria, and fungus was predominant compared to GR, TiO{sub 2}, and GT. And the result of biomolecules oxidation tests suggested that antimicrobial actions were contributed by oxidation stress on both membrane and antioxidant systems. Besides, the rate of two decisive processes during photocatalytic reaction, the rate of the charge transfer (k{sub CT}) and the rate of the electron-hole recombination (k{sub R}) have been studied by Perturbation theory, Radiation theory, and Schottky barrier theory. Calculation and derivation results show that GTA possesses superior charge separation and transfer rate, which gives an explanation for the excellent oxidation properties of GTA.

60 APPLIED LIFE SCIENCES↗

Molecular self ordering and charge transport in layer by layer deposited poly (3,3‴-dialkylquarterthiophene) films formed by Langmuir-Schaefer technique

The performance of π-conjugated polymer based electronic devices is directly governed by the molecular morphology of polymer aggregation, the extent to which a molecule is electronically coupled (self ordered and interacted) to neighboring molecules, and orientation. The well electronic coupled and crystalline/ordered polymer films have the potential to enhance the charge transport properties up to a benchmark. However, there is insufficient knowledge about the direct formation of large area, oriented, crystalline, and smooth films. In this study, we have presented Langmuir Schaefer technique to obtain the large area, oriented, crystalline, and smooth film of Poly (3,3‴-dialkylquarterthiophene) (PQT-12) polymer. The effect of self ordering and orientation of PQT-12 polymer on optical, morphological, and charge transport properties has been investigated. The prepared films have been characterized by UV-vis spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM), selected area diffractions pattern (SAED), and atomic force microscopy (AFM) techniques. UV-vis spectra, TEM, SAED, and AFM images of monolayer films reveal the formation of well ordered and electronically coupled polymer domains. Layer by layer deposited films reveal the change in the orientation, which is confirmed by Raman spectra. Electronic properties and layer dependent charge transport properties are investigated using sandwiched structure Al/PQT-12/ITO Schottky configuration with perpendicular to the deposited films. It is observed that the charge transport properties and device electronic parameters (ideality factor and turn on voltage) are significantly changing with increasing the number of PQT-12 layers. Our study also demonstrates the charge transport between polymer crystallites and cause of deviation of ideal behavior of organic Schottky diodes. It may be further explored for improving the performance of other organic and optoelectronic devices.

36 MATERIALS SCIENCE↗

Oxygen octahedra distortion induced structural and magnetic phase transitions in Bi{sub 1−x}Ca{sub x}Fe{sub 1−x}Mn{sub x}O{sub 3} ceramics

The co-doping of Ca and Mn in respective Bi and Fe-sites of BiFeO{sub 3} lattice leads to structural transition from rhombohedral (R3c space group) to orthorhombic (Pbnm space group) crystal symmetry. The tilt angle for anti-phase rotation of the oxygen octahedra of BiFeO{sub 3} at room temperature is observed to be ∼13.8°. It decreases with the increase in the co-doping percentage which suggests the composition-driven structural phase transition. The remnant magnetization for sample with 15% of co-doping becomes about 16 times that of BiFeO{sub 3}. It may be attributed to the suppression of cycloid spin structure and uncompensated spins at the surface of nanocrystallites. Further increase in co-doping percentage results in the sharp reduction of remnant magnetization due to the dominant contribution from the collinear antiferromagnetic ordering in the Pbnm space group. The Arrott plot analysis clearly indicates the composition-driven crossover from the antiferromagnetic to weak ferromagnetic ordering and vice versa. Electron spin resonance results provide the evidence for the composition-driven phase transitions from an incommensurate spin cycloidal modulated state to one with nearly homogeneous spin order. The band gap (2.17 eV) of BiFeO{sub 3} measured using UV-Vis spectra was supported by the resonance Raman spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A POPULATION OF X-RAY WEAK QUASARS: PHL 1811 ANALOGS AT HIGH REDSHIFT

We report the results from Chandra and XMM-Newton observations of a sample of 10 type 1 quasars selected to have unusual UV emission-line properties (weak and blueshifted high-ionization lines; strong UV Fe emission) similar to those of PHL 1811, a confirmed intrinsically X-ray weak quasar. These quasars were identified by the Sloan Digital Sky Survey at high redshift (z {approx} 2.2); eight are radio quiet while two are radio intermediate. All of the radio-quiet PHL 1811 analogs, without exception, are notably X-ray weak by a mean factor of {approx}13. These sources lack broad absorption lines and have blue UV/optical continua, supporting the hypothesis that they are intrinsically X-ray weak like PHL 1811 itself. However, their average X-ray spectrum appears to be harder than those of typical quasars, which may indicate the presence of heavy intrinsic X-ray absorption. Our sample of radio-quiet PHL 1811 analogs supports a connection between an X-ray weak spectral energy distribution and PHL 1811-like UV emission lines; this connection provides an economical way to identify X-ray weak type 1 quasars. The fraction of radio-quiet PHL 1811 analogs in the radio-quiet quasar population is estimated to be {approx}< 1.2%. We have investigated correlations between relative X-ray brightness and UV emission-line properties (e.g., C IV equivalent width and blueshift) for a sample combining our radio-quiet PHL 1811 analogs, PHL 1811 itself, and typical type 1 quasars. These correlation analyses suggest that PHL 1811 analogs may have extreme wind-dominated broad emission-line regions. Observationally, the radio-quiet PHL 1811 analogs appear to be a subset ({approx}30%) of radio-quiet weak-line quasars (WLQs). The existence of a subset of quasars in which high-ionization 'shielding gas' covers most of the broad emission-line region (BELR), but little more than the BELR, could potentially unify the PHL 1811 analogs and WLQs. The two radio-intermediate PHL 1811 analogs are X-ray bright. X-ray spectral analyses and consideration of their multiwavelength properties suggest that one of them has jet-dominated X-ray emission, while the nature of the other remains unclear.

79 ASTRONOMY AND ASTROPHYSICS↗

THE INFRARED AND UV-VISIBLE SPECTRA OF POLYCYCLIC AROMATIC HYDROCARBONS CONTAINING (5, 7)-MEMBER RING DEFECTS: A THEORETICAL STUDY

We report a theoretical investigation of the infrared (IR) spectra of polycyclic aromatic hydrocarbons (PAHs) containing (5, 7)-member ring defects based on a C{sub 48}H{sub 18} model. Calculations are mostly performed using the hybrid B3LYP density functional theory (DFT) with a 6-31G(d) or 4-31G basis set. The results show that the Stone-Wales defect in PAHs can yield a strong IR band at 1448 cm{sup -1} and a weak band at 611 cm{sup -1}, which may contribute to the UIR (unidentified infrared) bands at 6.9 {mu}m and 16.4 {mu}m observed in the interstellar medium. The charge effect on the IR spectra is discussed. The stability of the ring defected PAHs is also addressed by exploring the minimum energy pathway on the potential energy surface and through their UV-visible spectra, which are computed using a TDDFT method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗