Dielectric screening model for lattice vibrations of diamond-structure crystals
Two parameter model for lattice vibrations applicable to diamond structured crystals, calculating phonon dispersion curves from dielectric screening theory
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Two parameter model for lattice vibrations applicable to diamond structured crystals, calculating phonon dispersion curves from dielectric screening theory
Impact dampers belong to the category of passive vibration devices used to attenuate the vibration of discrete and continuous systems. An impact damper generally consists of a mass which is allowed to travel freely between two defined stops. Under the right conditions, the vibration of the structure to which the impact damper is attached will cause the mass of the impact damper to strike the structure. Previous analytical and experimental research work on the effect of impact dampers in attenuating the vibration of discrete and continuous systems have demonstrated their effectiveness. It has been shown in this study that impact dampers can increase the intrinsic damping of a lightly-damped flexible structure. The test structure consists of a slender flexible beam supported by a pin-type support at one end and supported by a linear helical flexible spring at another location. Sinusoidal excitation spanning the first three natural frequencies was applied in the horizontal plane. The orientation of the excitation and the test structure in the horizontal plane minimizes the effect of gravity on the behavior of the test structure. The excitation was applied using a linear sine sweep technique. The span of the test structure, the mass of the impact damper, the distance of travel, and the location of the impact damper along the span of the test structure were varied. The damping ratio are estimated for sixty test configurations. The results show that the impact damper significantly increases the damping ratio of the test structure. Statistical analysis of the results using the method of multiple linear regression indicates that a reasonable fit has been accomplished. It is concluded that additional experimental analysis of flexible structures in microgravity environment is needed in order to achieve a better understanding of the behavior of impact damper under conditions of microgravity. Numerical solution of the behavior of flexible structures equipped with impact dampers is also needed to predict stresses and deformations under operating conditions of microgravity in space applications.
While structural damage detection based on flexural vibration shapes, such as mode shapes and steady-state response shapes under harmonic excitation, has been well developed, little attention is paid to that based on longitudinal vibration shapes that also contain damage information. This study originally formulates a slope vibration shape for damage detection in bars using longitudinal vibration shapes. To enhance noise robustness of the method, a slope vibration shape is transformed to a multiscale slope vibration shape in a multiscale domain using wavelet transform, which has explicit physical implication, high damage sensitivity, and noise robustness. These advantages are demonstrated in numerical cases of damaged bars, and results show that multiscale slope vibration shapes can be used for identifying and locating damage in a noisy environment. A three-dimensional (3D) scanning laser vibrometer is used to measure the longitudinal steady-state response shape of an aluminum bar with damage due to reduced cross-sectional dimensions under harmonic excitation, and results show that the method can successfully identify and locate the damage. Slopes of longitudinal vibration shapes are shown to be suitable for damage detection in bars and have potential for applications in noisy environments.
As systems become more complex, systems engineers rely on experts to inform decisions. There are few experts and limited data in many complex new technologies. This challenges systems engineers as they strive to plan activities such as qualification in an environment where technical constraints are coupled with the traditional cost, risk, and schedule constraints. Bayesian network (BN) models provide a framework to aid systems engineers in planning qualification efforts with complex constraints by harnessing expert knowledge and incorporating technical factors. By quantifying causal factors, a BN model can provide data about the risk of implementing a decision supplemented with information on driving factors. This allows a systems engineer to make informed decisions and examine “what-if” scenarios. This paper discusses a novel process developed to define a BN model structure based primarily on expert knowledge supplemented with extremely limited data (25 data sets or less). The model was developed to aid qualification decisions—specifically to predict the suitability of six degrees of freedom (6DOF) vibration testing for qualification. The process defined the model structure with expert knowledge in an unbiased manner. Finally, validation during the process execution and of the model provided evidence the process may be an effective tool in harnessing expert knowledge for a BN model.
Dynamic testing of large flight vehicles (rockets) is not only complex, but also can be very costly. These flights are infrequent and can lead to disastrous effects if something were to fail during the flight. The development of sensors coupled to internal components offers a great challenge in reducing their size, yet still maintaining their precision. Sounding rockets provide both a viable and convenient alternative to the more costly vehicular flights. Some of the major objectives are to test various types of sensors for monitoring components of high interest as well as investigating real-time processing techniques. Signal processing presents an extreme challenge in this noisy multichannel environment. The estimation and tracking of modal frequencies from vibrating structures is an important set of features that can provide information about the components under test; therefore, high resolution multichannel spectral processing is required. Finally, the application of both single channel and multichannel techniques capable of producing reliable modal frequency estimates of a vibrating structure from uncertain accelerometer measurements is discussed.
The bismuth lutetium tungstate phase BiLuWO{sub 6} has been prepared using a solid state route with stoichiometric mixtures of oxide precursors. The obtained polycrystalline phase has been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. In the first step, the crystal structure has been refined using Rietveld method: the crystal cell was resolved using monoclinic system (parameters a, b, c, β) with space group A2/m. SEM images showed the presence of large crystallites with a constant local nominal composition (BiLuW). TEM analyses showed that the actual local structure could be better represented by a superlattice (a, 2b, c, β) associated with space groups P2 or P2/m. The Raman spectroscopy showed the presence of vibrational bands similar to those observed in the compounds BiREWO{sub 6} with RE=Y, Gd, Nd. However, these vibrational bands were characterized by large full width at half maximum, probably resulting from the long range Bi/Lu disorder and local WO{sub 6} octahedron distortions in the structure. - Graphical abstract: The average structure of BiLuWO{sub 6} determined from X-ray diffraction data can be represented by A2/m space group. Experimental Electron Diffraction patterns along the [0vw] zone axes of the monoclinic structure and associated simulated patterns show the existence of a monoclinic superstructure with space group P2 or P2/m. - Highlights: • A new monoclinic BiLuWO{sub 6} phase has been elaborated from solid-state reaction. • The space group of the monoclinic disordered average structure should be A2/m. • Transmission electron microscopy leads to a superlattice with P2/m space group. • Raman spectroscopy suggests existence of local disorder.
Controlling vibration of structures is essential for both space structures as well as terrestrial structures. Due to the ambient acceleration levels anticipated for the International Space Station, active vibration isolation is required to provide a quiescent acceleration environment for many science experiments. An overview is given of systems developed and flight tested in orbit for microgravity vibration isolation. Technology developed for vibration control of flexible space structures may also be applied to control of terrestrial structures such as buildings and bridges subject to wind loading or earthquake excitation. Recent developments in modern robust control for flexible space structures are shown to provide good structural vibration control while maintaining robustness to model uncertainties. Results of a mixed H-2/H-infinity control design are provided for a benchmark problem in structural control for earthquake resistant buildings.
This presentation describes the vibration test campaign of the Structural Verification Unit for the Global Ecosystem Dynamics Investigation (GEDI) mission The Structural Verification Unit test campaign served multiple purposes including the qualification of the instrument primary structure, verification of the structure's stiffness, Aperture Control Mechanism assembly level verification, and validation of the control approach for protoflight instrument vibration testing. Testing included three axes of sine burst, random, and sine vibration excitation. This test sequence required a high number of response instrumentation sensors that included tri-axial accelerometers and tri-axial force gauges. Multiple response limiting methods that included acceleration, force, and moment measurements were used to ensure the safety of the flight hardware. The lessons and specific test details learned on the structural verification unit test campaign will reduce test risks for the upcoming instrument-level vibration tests.
The structure of liquid water as a function of temperature is explored through the modeling of infrared and Raman spectra along with structural order parameters calculated from classical and quantum molecular dynamics simulations with the MB-pol many-body potential energy function. The magnitude of nuclear quantum effects is also monitored by comparing the vibrational spectra obtained from classical and centroid molecular dynamics, both in intensities and peak positions. The observed changes in spectral activities are shown to reflect changes in the underlying structure of the hydrogen-bond network and are found to be particularly sensitive to many-body effects in the representation of the electrostatic interactions. As a whole, good consensus is found with the experimental spectra, which provides further evidence for the accuracy of MB-pol in predicting the properties of water.
Bimetallic transition metal complexes have gained increasing attention because of their versatile functions in solar energy conversion and photonics applications arising from inter-metal electronic coupling. In bimetallic platinum (Pt) complexes, electronic communication between the Pt-centered and ligand-centered moieties have been shown to be critical for defining their excited-state dynamic trajectories undergoing either localized ligand centered (LC)/metal-to-ligand-charge-transfer (MLCT) transitions or delocalized metal-metal-to-ligand-charge-transfer (MMLCT) transitions. The branching of the excited-state intersystem crossing (ISC) trajectories are modulated through structural factors that alter the relative energies of the different states. In this study, we investigated the correlation of the structural factors influencing the excited state trajectories. Using femtosecond broadband transient absorption (fs-BBTA) spectroscopy, ultrafast dynamics in the excited state of two select Pt(II) dimers have been mapped out using their coherent vibrational wavepacket signatures in corresponding transient absorption spectra. To examine how the ligand moieties of the Pt(II) dimers influence excited-state dynamics and the coherent vibrational wavepacket behavior, here we carried out comparative studies on two pyrazolate-bridged Pt(II) dimers of the general formula [Pt( t Bu 2 Pz)(N^C)] 2 ( t Bu 2 Pz = 3,5-di-tert-butylpyrazole); N^C = 7,8-benzoquinoline (bzq, 1) or 1-phenylisoquinoline (piq, 2)). We found that photoexcitation into the low energy absorption bands of 1 and 2 respectively induce the formation of 1 MMLCT states from which ultrafast ISC proceeds, resulting in stimulated emission quenching and decoherence of the vibrational wavepacket motions. The results obtained in this study suggest that both energetics and the structural rigidity of the aromatic cyclometalating ligands in 1 and 2 can significantly influence dynamics along the excited state trajectory characterized by dephasing of the coherent oscillations. The collective results provide direct evidence of how ligand structure alters electronic dynamics along excited state trajectories associated with ISC processes, providing insight into using ligand design to steer photochemical processes.
Numerical techniques for calculating the low frequency vibrational resonances of submerged structures are reviewed. Both finite element and boundary element approaches for calculating fully-coupled added mass matrices for use in NASTRAN analysis are described and illustrated. The finite element approach is implemented using existing capability in NASTRAN. The boundary element approach uses the NASHUA structural-acoustics program to compute the added mass matrix. The two procedures are compared to each other for the case of a submerged cylindrical shell with flat end closures. It is concluded that both procedures are capable of computing accurate submerged resonances and that the more elegant boundary element procedure is easier to use but may be more expensive computationally.
The triphosphate dodecahydrate of cobalt and sodium CoNa 3 P 3 O 10 ·12H 2 O was prepared by the ion exchange resin process. Its structure was studied by X-ray diffraction and determined in the monoclinic space group P12 1 /c1 with the unit-cell parameters a = 14.6650(5) Å, b=9.1916(3) Å, c = 15.0239(5) Å,β =90.2210(10)°, Z = 4 and V = 2025.13(12) Å 3 . The thermal dehydration of this compound was performed, leading to an anhydrous new form, CoNa 3 P 3 O 10 , which was characterized by X-ray diffraction. The obtained CoNa 3 P 3 O 10 crystallized in monoclinic space group P21/n with the unit-cell parameters a=15,3774 Å, b=7,6988 A°, c=14,2832A°, β=92,9115°. The characteristic IR wavenumbers of the P 3 O 10 5- ions observed in the vibrational spectra were calculated using isotopic substitutions, which confirms the existence of these groups in the studied compound. A comparison between the IR and Raman wavenumbers of CoNa 3 P 3 O 10 ·12H 2 O, CoNa 3 P 3 O 10 and Na 5 P 3 O 10 ·12H 2 was performed. A kinetic study was also made for CoNa 3 P 3 O 10 ·12H 2 O.
The relative benefits of passive and active vibration suppression for large space structures (LSS) are discussed. The intent is to sketch the true ranges of applicability of these approaches using previously published technical results. It was found that the distinction between active and passive vibration suppression approaches is not as sharp as might be thought at first. The relative simplicity, reliability, and cost effectiveness touted for passive measures are vitiated by 'hidden costs' bound up with detailed engineering implementation issues and inherent performance limitations. At the same time, reliability and robustness issues are often cited against active control. It is argued that a continuum of vibration suppression measures offering mutually supporting capabilities is needed. The challenge is to properly orchestrate a spectrum of methods to reap the synergistic benefits of combined advanced materials, passive damping, and active control.
The development of aeropropulsion components that incorporate "smart" composite laminates with embedded piezoelectric actuators and sensors is expected to ameliorate critical problems in advanced aircraft engines related to vibration, noise emission, and thermal stability. To facilitate the analytical needs of this effort, the NASA Lewis Research Center has developed mechanics and multidisciplinary computational models to analyze the complicated electromechanical behavior of realistic smart-structure configurations operating in combined mechanical, thermal, and acoustic environments. The models have been developed to accommodate the particular geometries, environments, and technical challenges encountered in advanced aircraft engines, yet their unique analytical features are expected to facilitate application of this new technology in a variety of commercial applications.
The acoustic loads resulting from aircraft noise and sonic booms which can induce vibration in the structure and result in radiation of noise into its interior, rattling of items in contact with the structure, and the perception of the inhabitants that the structure is vibrating, are investigated. In particular, the response of buildings, particularly residential structures, to aircraft noise and the resulting effects on human response have been the subjects of considerable research at the NASA Langley Research Center. These studies are reviewed with particular emphasis on the response of houses to aircraft overflight noise and any increase in noise annoyance caused by the perception of vibration and rattling.
We have studied the effect of water in the supercritical phase of CO2 as a function of water self-association using DFT-based molecular dynamics simulations. The dependence of the intermolecular and intramolecular structure and dynamic properties upon water concentration in the supercritical CO2/H2O phase at a density of 0.81g/cm3 and temperature of 318.15K is investigated in detail and compared to previous studies of the pure sc-CO2 system and Monte-Carlo simulations of water in sc-CO2 phase. Analysis of radial and orientational distribution functions of the intermolecular interactions shows that the presence of water molecules does not disturb the previously established distorted T-shaped orientation of CO2 molecules, though there is strong evidence of perturbation of the second shell structure which enhances the preference for the slipped parallel orientation in this region. There is also evidence of short-lived hydrogen bonds between CO2 and water molecules. For higher water concentrations, water clustering is observed, consistent with the expected phase separation under these conditions of temperature and pressure. Finally, the water-water and water-CO2 interactions are discussed and analyzed in terms of the water self-association and thermodynamic quantities derived from the corresponding radial distribution functions. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.
Equations are developed for vibration of general lattice structures that have repetitive geometry. The method of solution is an extension of a previous paper for buckling of similar structures. The theory is based on representing each member of the structure with the exact dynamic stiffness matrix and taking advantage of the repetitive geometry to obtain an eigenvalue problem involving the degrees-of-freedom at a single node in the lattice. Results are given for shell-and beam-like lattice structures and for rings stiffened with tension cables and a central mast. The variation of frequency with external loading and the effect of local member vibration on overall modes is shown.
Abstract Nuclei are complex many-body quantum systems where interactions of the neutrons and protons via the strong, the weak, and the electromagnetic forces lead to the emergence of simple patterns of energy states that have been described by various theoretical approaches. One of the goals of all the theoretical models is the development of a universal theory that can be applied across the entire chart of nuclides. Significant progress has been made by experiments as well as the increasing sophistication of models, but a universal theory has yet to be established. A recent review of nuclei in the Z = 50–82 region of the chart of nuclides has analyzed all the available compiled data from several decades of studies towards a clarification of the low-lying structure of nuclei. Other reviews have reported and explained the emergence of multiple different shapes in nuclei at somewhat higher excitation energies than the ground state. Some have challenged the interpretation of the first excited K π = 0 + band as a vibration of ground state. This work attempts to provide a guide to determining the nature of the first excited K π = 0 + band in nuclei by the combined use of nuclear lifetimes, energy level evolutions, dynamic moments of inertia, and intrinsic quadrupole moments extracted from transition probabilities. The result is that for a subset of the nuclei in this region, the K π = 0 + band is consistent with the traditional 𝛽-vibration description of an oscillation built on the ground state.