Search NASA⌕ Search

SEARCH · Search NASA

Results for “array antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Timing signal propagates without phase shift

Continous monitoring of transmission delay corrects for phase shift. Nodes in Master/Slave Returnable Timing System (MSRTS) are arranged in hierarchy, with each node serving as master to several slave nodes. As signal at each slave is synchronized with original master, it serves as master to synchronize following slave nodes. System improves performance of phased microwave antenna arrays in solar-powered satellites and clock distribution systems in avionics and computers.

Kantak, A. V.↗
NASA NTRS1980

SPS pilot signal design and power transponder analysis, volume 2, phase 3

The problem of pilot signal parameter optimization and the related problem of power transponder performance analysis for the Solar Power Satellite reference phase control system are addressed. Signal and interference models were established to enable specifications of the front end filters including both the notch filter and the antenna frequency response. A simulation program package was developed to be included in SOLARSIM to perform tradeoffs of system parameters based on minimizing the phase error for the pilot phase extraction. An analytical model that characterizes the overall power transponder operation was developed. From this model, the effects of different phase noise disturbance sources that contribute to phase variations at the output of the power transponders were studied and quantified. Results indicate that it is feasible to hold the antenna array phase error to less than one degree per power module for the type of disturbances modeled.

Lindsey, W. C.↗
NASA NTRS1979

Satellite antenna technology. Citations from the International Aerospace Abstracts data base

This bibliography of citations to articles from the international literature concerns satellite antenna technology. Topics stressed are antenna design studies dealing with antenna radiation patterns and antenna arrays. This bibliography excludes articles cited in the published searches titled Communications Satellite Technology. The bibliography contains 213 citations.

Zollars, G. F.↗
NASA NTRS1980

Solar power satellite offshore rectenna study

Offshore rectennas are feasible and cost competitive with land rectennas but the type of rectenna suitable for offshore use is quite different from that specified in the present reference system. A nonground plane design minimizes the weight and greatly reduces the number of costly support towers. This perferred design is an antenna array consisting of individually encapsulated dipoles with reflectors or tagis supported on feed wires. Such a 5 GW rectenna could be built at a 50 m water depth site to withstand hurricane, winter storm, and icing conditions for a one time cost of $5.7 billion. Subsequent units would be about 1.3 less expensive. More benign and more shallow water sites would result in substantially lower costs. The major advantage of an offshore rectenna is the removal of microwave radiation from populated areas.

Source record↗
NASA NTRS1980

Solar power satellite offshore rectenna study

It was found that an offshore rectenna is feasible and cost competitive with land rectennas but that the type of rectenna which is suitable for offshore use is quite different from that specified in the present reference system. The result is a nonground plane design which minimizes the weight and greatly reduces the number of costly support towers. This preferred design is an antenna array consisting of individually encapsulated dipoles with reflectors supported on feed wires. Such a 5 GW rectenna could be built at a 50 m water depth site to withstand hurricane and icing conditions for a one time cost of 5.7 billion dollars. Subsequent units would be about 1/3 less expensive. The east coast site chosen for this study represents an extreme case of severe environmental conditions. More benign and more shallow water sites would result in lower costs. Secondary uses such as mariculture appear practical with only minor impact on the rectenna design. The potential advantages of an offshore rectenna, such as no land requirements, removal of microwave radiation from populated areas and minimal impact on the local geopolitics argue strongly that further investigation of the offshore rectenna should be vigorously pursued.

Source record↗
NASA NTRS1981

The effects of receiver tracking phase error on the performance of the concatenated Reed-Solomon/Viterbi channel coding system

Analytical and experimental results are presented of the effects of receiver tracking phase error, caused by weak signal conditions on either the uplink or the downlink or both, on the performance of the concatenated Reed-Solomon (RS) Viterbi channel coding system. The test results were obtained under an emulated S band uplink and X band downlink, two way space communication channel in the telecommunication development laboratory of JPL with data rates ranging from 4 kHz to 20 kHz. It is shown that, with ideal interleaving, the concatenated RS/Viterbi coding system is capable of yielding large coding gains at very low bit error probabilities over the Viterbi decoded convolutional only coding system. Results on the effects of receiver tracking phase errors on the performance of the concatenated coding system with antenna array combining are included.

Liu, K. Y.↗
NASA NTRS1981

A broadband RF continuously variable time delay device

A method for implementation of continuously variable time delay of broadband RF signals is described. The method uses Bragg Cell and optical heterodyne technology. The signal to be delayed is applied to the Bragg Cell acoustic transducer, and the delay time is the acoustic transit time from this transducer to the incident light beam. By translating the light beam, the delay is varied. Expressions describing the Bragg Cell diffraction, lens Fourier transformation, and the optical heterodyne processes are developed. Specifications for the variable delay including bandwidth, range of delay, and insertion loss are provided. Applications include radar signal processing, spread spectrum intercept, radar ECM, and adaptive array antenna processing.

Freyre, F. W.↗
NASA NTRS1984

Stabilizing Fiber-Optic Transmission Lines

Voltage-controlled optical phase shifter is key. Optical phase shifter stabilizes propagation delay of fiber-optic transmission line by compensating for temperature and pressure effects. Applicable to phased array antenna systems and very-long-baseline interferometer distribution systems.

Lutes, G. F.↗
NASA NTRS1983

Capabilities and limitations of existing MST radars: Poker Flat

Designed as a prototype system to continuously monitor the atmosphere up to approximately 100 km, the Poker Flat MST radar began operating in 1979 at a relatively low sensitivity. In almost continuous operation since then, the system is steadily increasing in sensitivity to its ultimate design characteristics. Current and final parameters are listed. The advantages of its modular design, which uses 64 transmitting modules distributed through the 200 mx 200 m antenna array include: easy maintenance, beam switching using very low power switching, air cooled transmitting tubes, lower feedline costs, and no moving parts. Continuous, uninterrupted operation ( 4 years) and less man-made interference because of the remote location) are other assets. Most disadvantages are related to its not-yet-finished status, climate, moose excursions, and operating expenses.

Balsley, B. B.↗
NASA NTRS1983

Design considerations for high-power VHF radar transceivers: Phase matching long coaxial cables using a cable radar

The Poker Flat 49.92-MHz MST radar uses 64 phase-controlled transmitters in individual shelters distributed throughout the antenna array. Phase control is accomplished by sampling the transmitted pulse at the directional coupler of each transmitter and sending the sample pulse back to a phase-control unit. This method requires phase matching 64 long (256 meter) coaxial cables (RG-213) to within several electrical degrees. Tests with a time domain reflectometer showed that attenuation of high frequency components in the long RG-213 cable rounded the leading edge of the reflected pulse so that the cables could only be measured to within 50 cm (about 45 deg at 49.92 MHz). Another measurement technique using a vector voltmeter to compare forward and reflected phase required a directional coupler with unattainable directivity. Several other techniques were also found lacking, primarily because of loss in the long RG-213 cables. At this point it was realized that what was needed was a simple version of the phase-coherent clear-air radar, i.e., a cable radar. The design and operation of this cable are described.

Johnson, P. E.↗
NASA NTRS1983

The mobile Sousy-Doppler radar: Technical design and first results

A mobile VHF Doppler system was developed. The electronic part is installed in a 20 ft container and tested using a special log periodic aerial to illuminate the 300 m dish. The system was extended by designing a mobile phased antenna array with finally 576 Yagi elements. The grouping of the single Yagis, the system of transmission lines, the phase shifters, the power splitters and the T/R switch are described. Results from the first two campaigns and a survey of future programs demonstrating the flexibility of this mobile system are summarized.

Czechowsky, P.↗
NASA NTRS1984

Symbol-stream Combiner: Description and Demonstration Plans

A system is described and demonstration plans presented for antenna arraying by symbol stream combining. This system is used to enhance the signal-to-noise ratio of a spacecraft signals by combining the detected symbol streams from two or more receiving stations. Symbol stream combining has both cost and performance advantages over other arraying methods. Demonstrations are planned on Voyager 2 both prior to and during Uranus encounter. Operational use is possible for interagency arraying of non-Deep Space Network stations at Neptune encounter.

Hurd, W. J.↗
NASA NTRS1983

Considerations for millimeter wave printed antennas

Calculated data are presented on the performance of printed antenna elements on substrates which may be electrically thick, as would be the case for printed antennas at millimeter wave frequencies. Printed dipoles and microstrip patch antennas on polytetrafluoroethylene (PTFE), quartz, and gallium arsenide substrates are considered. Data are given for resonant length, resonant resistance, bandwidth, loss due to surface waves, loss due to dielectric heating, and mutual coupling. Also presented is an optimization procedure for maximizing or minimizing power launched into surface waves from a multielement printed antenna array. The data are calculated by a moment method solution.

Pozar, D. M.↗
NASA NTRS1984

Far-infrared embedding impedance measurements

A technique which allows the measurement of detector embedding impedance has been developed. By using a bismuth microbolometer as a variable resistance load the impedance of one element in a bow-tie antenna array operating at 94 GHz was inferred. The technique is frequency insensitive, and could be used throughout the far-infrared.

Neikirk, D. P.↗
NASA NTRS1984

A note on the proposed UK VHF radar

The proposal for the establishment of a VHF radar in the UK is still under active consideration, although for financial reasons no start has yet been made on an installation. Several changes have been made to the scheme as described and these are listed. (1) The initial installation will be suitable for stratosphere-troposphere (ST) operation only using 64 antennas and 2 power modules. (2) An existing site is being examined on the west coast of Wales, which because it is a former Loran ground station is provided with the buildings, power and communications facilities to enable a radar to be assembled much more quickly than a green field site would allow. Because the site is not within a mountain valley as originally intended, careful early attention will have to be given to the possible problems of local interference and sea-surface returns. (3) Preliminary discussions with the UK licensing authorities suggest that a frequency of 47 MHz is more likely than 50 MHz. (4) Minor changes are planned in the antenna array connection scheme of the 400-element mesosphere-stratosphere-troposphere (MST) array to allow more precise sidelobe suppression to be achieved in the receive mode.

Hall, A. J.↗
NASA NTRS1986

Distributed synthetic aperture radar simulation

Synthetic aperture radar (SAR) depends primarily on attainable frequency resolution rather than on large physical size of the antenna array. The distributed architecture concept (DSAR) incorporates active elements (amplifiers) at or near the elemental radiators of the array. Since SAR's are expensive to build and expensive to test, a computer modeling approach is a feasible method of predicting the quality or nature of the SAR image from the proposed system parameters. The goal of this project is to produce a DSAR simulation software package. This report describes the progress made thus far and the work which remains to be done. Extensive work on this project had been done previously by two NASA contractors. The principal task remaining involved the creation of a suitable interface between these programs and the hardware and software available at the Johnson Space Center.

Bourgeois, B. A.↗
NASA NTRS1985

Remote sensing of the earth with spaceborne imaging radars

Recent scientific and technological developments are reviewed in the field of earth observation with spaceborne imaging radars. Such developments, beginning with Seasat in 1978 and continuing with the Space Shuttle in 1981 and 1984, were made possible by the use of new large spaceborne lightweight planar array antennas (2 x 10 m) with printed radiating elements. Transmitters were solid-state 1-kW peak power units operating at L-band (1.2 GHz). Images were obtained to monitor sea ice, soil moisture, and geologic, biologic and oceanographic features. Optical and digital processing was done to achieve high resolution (25 to 40 m). More advanced systems are under development, including multispectral, multipolarization imaging radar systems for flight in the late 1980s. An overview of planned activities in the 1980s is given.

Elachi, C.↗
NASA NTRS1986

Middle Atmosphere Program. Handbook for MAP, volume 20

Various topics related to investigations of the middle atmosphere are discussed. Numerical weather prediction, performance characteristics of weather profiling radars, determination of gravity wave and turbulence parameters, case studies of gravity-wave propagation, turbulence and diffusion due to gravity waves, the climatology of gravity waves, mesosphere-stratosphere-troposphere radar, antenna arrays, and data management techniques are among the topics discussed.

Bowhill, S. A.↗