Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Tunable room-temperature ferromagnetism in Co-doped two-dimensional van der Waals ZnO

The recent discovery of ferromagnetism in two-dimensional van der Waals crystals has provoked a surge of interest in the exploration of fundamental spin interaction in reduced dimensions. However, existing material candidates have several limitations, notably lacking intrinsic room-temperature ferromagnetic order and air stability. Here, motivated by the anomalously high Curie temperature observed in bulk diluted magnetic oxides, we demonstrate room-temperature ferromagnetism in Co-doped graphene-like Zinc Oxide, a chemically stable layered material in air, down to single atom thickness. Through the magneto-optic Kerr effect, superconducting quantum interference device and X-ray magnetic circular dichroism measurements, we observe clear evidences of spontaneous magnetization in such exotic material systems at room temperature and above. Transmission electron microscopy and atomic force microscopy results explicitly exclude the existence of metallic Co or cobalt oxides clusters. X-ray characterizations reveal that the substitutional Co atoms form Co 2+ states in the graphitic lattice of ZnO. By varying the Co doping level, we observe transitions between paramagnetic, ferromagnetic and less ordered phases due to the interplay between impurity-band-exchange and super-exchange interactions. Our discovery opens another path to 2D ferromagnetism at room temperature with the advantage of exceptional tunability and robustness.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanoscale Mass Spectrometry Multimodal Imaging via Tip-Enhanced Photothermal Desorption

Materials ranging from adhesives, pharmaceuticals, lubricants, and personal care products are traditionally studied using macroscopic characterization techniques. However, their functionality is in reality defined by details of chemical organization on often noncrystalline matter with characteristic length scales on the order of microns to nanometers. Additionally, these materials are traditionally difficult to analyze using standard vacuum-based approaches that provide nanoscale chemical characterization due to their volatile and beam-sensitive nature. Therefore, approaches that operate under ambient conditions need to be developed that allow probing of nanoscale chemical phenomena and correlated functionality. Here, we demonstrate a tool for probing and visualizing local chemical environments and correlating them to material structure and functionality using advanced multimodal chemical imaging on a combined atomic force microscopy (AFM) and mass spectrometry (MS) system using tip-enhanced photothermal desorption with atmospheric pressure chemical ionization (APCI). We demonstrate enhanced performance metrics of the technique for correlated imaging and point sampling and illustrate the applicability for the analysis of trace chemicals on a human hair, additives in adhesives on paper, and pharmaceuticals samples notoriously difficult to analyze in a vacuum environment. Overall, this approach of correlating local chemical environments to structure and functionality is key to advancing research in many fields ranging from biology, to medicine, to material science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

N and OH-Immobilized Cu 3 Clusters In Situ Reconstructed from Single-Metal Sites for Efficient CO 2 Electromethanation in Bicontinuous Mesochannels

Cu-based catalysts hold promise for electrifying CO 2 to produce methane, an extensively used fuel. However, the activity and selectivity remain insufficient due to the lack of catalyst design principles to steer complex CO 2 reduction pathways. Herein, we develop a concept to design carbon-supported Cu catalysts by regulating Cu active sites’ atomic-scale structures and engineering the carbon support’s mesoscale architecture. This aims to provide a favorable local reaction microenvironment for a selective CO 2 reduction pathway to methane. In situ X-ray absorption and Raman spectroscopy analyses reveal the dynamic reconstruction of nitrogen and hydroxyl-immobilized Cu 3 (N,OH-Cu 3 ) clusters derived from atomically dispersed Cu–N 3 sites under realistic CO 2 reduction conditions. The N,OH-Cu 3 sites possess moderate *CO adsorption affinity and a low barrier for *CO hydrogenation, enabling intrinsically selective CO 2 -to-CH 4 reduction compared to the C–C coupling with a high energy barrier. Importantly, a block copolymer-derived carbon fiber support with interconnected mesopores is constructed. The unique long-range mesochannels offer an H 2 O-deficient microenvironment and prolong the transport path for the CO intermediate, which could suppress the hydrogen evolution reaction and favor deep CO 2 reduction toward methane formation. Thus, the newly developed catalyst consisting of in situ constructed N,OH-Cu 3 active sites embedded into bicontinuous carbon mesochannels achieved an unprecedented Faradaic efficiency of 74.2% for the CO 2 reduction to methane at an industry-level current density of 300 mA cm –2 . In conclusion, this work explores effective concepts for steering desirable reaction pathways in complex interfacial catalytic systems via modulating active site structures at the atomic level and engineering pore architectures of supports on the mesoscale to create favorable microenvironments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Transient Studies of Nonequilibrium Transport in Two-Dimensional Semiconductors

The overarching objective of research under DOE support has been to investigate emergent carrier phenomena in different two-dimensional (2D) systems, under conditions where they are driven far from equilibrium. The description of nonequilibrium transport has long represented one of the most enduring challenges in condensed-matter physics, in large part due to the need to invoke the role of complex many-body phenomena (electron-phonon and electron-electron coupling) in this regime. In this project, we have explored aspects of this problem in a variety of different two-dimensional systems. These include the modulation-doped two-dimensional electrons gas, or 2DEG, in GaAs/AlGaAs heterostructures; the electron and hole systems in graphene and its related hetero-structures, and; the strongly-confined electron layers in transition-metal dichalcogenide (MoS 2 and WS 2 ) and trichalcogenide (TiS 3 ) materials. Significant understanding has been achieved in a number of different areas, as we elaborate upon in subsequent sections of this proposal: Nanoscale spectroscopy of defect-related barriers in MoS2 Negative differential conductance due to inter-valley scattering in WS 2 under high fields Incipient localization due to scattering from frozen-phonon disorder in quantum point contacts High-field transient transport in graphene/hexagonal BN heterostructures Universal voltage scaling of quantum corrections in graphene under nonequilibrium A defining feature of much of this research has been an approach to problem solving in which novel experimental techniques (such as transient electrical pulsing and scanning-probe microscopy) are combined with the development (in collaboration with colleagues from condensed-matter theory) of sophisticated models, a strategy that we propose to continue in our future research. In recent years, we have developed an increasing capacity for handling atomically-thin materials, and their van der Waals systems, a capacity that is reflected in the balance of topics listed above.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Phase-field modeling of radiation-induced composition redistribution: An application to additively manufactured austenitic Fe–Cr–Ni

Multicomponent alloys undergoing irradiation damage develop radiation-induced composition redistribution at point defect sinks such as grain boundaries (GBs) and dislocations. Such redistribution results in undesired changes to their mechanical behavior and corrosion resistance. Additively manufactured alloys proposed for future nuclear applications are expected to demonstrate a distinct response to irradiation owing to their unique microstructure with as-solidified dislocation density and chemical microsegregation. To capture the composition redistribution in such systems, we develop a mesoscale model with coupled evolution of atomic and point defect components in the presence of dislocation density, dislocation heterogeneity, and thermodynamic interactions at the GB. The model is parameterized for an FCC Fe–Cr–Ni alloy as a representative system for austenitic stainless steels, and simulations are performed in 1D and 2D as a function of irradiation temperature, dose, dislocation density, and grain size. Radiation-induced segregation (RIS) characterized by Cr depletion and Ni enrichment is predicted at both the GB and the dislocation cell wall, with RIS being lower in magnitude but wider at the cell wall. Strongly biased absorption of self-interstitials by dislocations is found to suppress Ni enrichment but slightly enhance Cr depletion under certain conditions. Thermodynamic segregation at the GB is predicted to be narrower and opposite in sign to RIS for both Cr and Ni. Importantly, non-monotonic segregation is found to occur when both thermodynamic and RIS mechanisms are considered, providing a novel physical interpretation of experimental observations. The model is expected to serve as a key tool in accelerated qualification of irradiated materials.

additively manufactured microstructure↗
DOE OSTI2024

Synergizing Fe 2 O 3 Nanoparticles on Single Atom Fe‐N‐C for Nitrate Reduction to Ammonia at Industrial Current Densities

The electrochemical reduction of nitrates (NO 3 − ) enables a pathway for the carbon neutral synthesis of ammonia (NH 3 ), via the nitrate reduction reaction (NO 3 RR), which has been demonstrated at high selectivity. However, to make NH 3 synthesis cost-competitive with current technologies, high NH 3 partial current densities (j NH3 ) must be achieved to reduce the levelized cost of NH 3 . Here, the high NO 3 RR activity of Fe-based materials is leveraged to synthesize a novel active particle-active support system with Fe 2 O 3 nanoparticles supported on atomically dispersed Fe–N–C. The optimized 3×Fe 2 O 3 /Fe–N–C catalyst demonstrates an ultrahigh NO 3 RR activity, reaching a maximum j NH3 of 1.95 A cm −2 at a Faradaic efficiency (FE) for NH 3 of 100% and an NH 3 yield rate over 9 mmol hr −1 cm −2 . Operando XANES and post-mortem XPS reveal the importance of a pre-reduction activation step, reducing the surface Fe 2 O 3 (Fe 3+ ) to highly active Fe 0 sites, which are maintained during electrolysis. Durability studies demonstrate the robustness of both the Fe 2 O 3 particles and Fe–N x sites at highly cathodic potentials, maintaining a current of −1.3 A cm −2 over 24 hours. This work exhibits an effective and durable active particle-active support system enhancing the performance of the NO 3 RR, enabling industrially relevant current densities and near 100% selectivity.

active support↗
DOE OSTI2024

Scalable, ab initio protocol for quantum simulating SU($N$)×U(1) Lattice Gauge Theories

We propose a protocol for the scalable quantum simulation of SU(N)×U(1) lattice gauge theories with alkaline-earth like atoms in optical lattices in both one- and two-dimensional systems. The protocol exploits the combination of naturally occurring SU(N) pseudo-spin symmetry and strong inter-orbital interactions that is unique to such atomic species. A detailed ab initio study of the microscopic dynamics shows how gauge invariance emerges in an accessible parameter regime, and allows us to identify the main challenges in the simulation of such theories. We provide quantitative results about the requirements in terms of experimental stability in relation to observing gauge invariant dynamics, a key element for a deeper analysis on the functioning of such class of theories in both quantum simulators and computers.

Physics↗
DOE OSTI2025

Mapping strain and structural heterogeneities around bubbles in amorphous ionically conductive Bi 2 O 3

While amorphous materials are often approximated to have a statistically homogeneous atomic structure, they frequently exhibit localized structural heterogeneity that challenges simplified models. This study uses 4D scanning transmission electron microscopy to investigate the strain and structural modifications around gas bubbles in amorphous Bi 2 O 3 induced by argon irradiation. We present a method for determining strain fields surrounding bubbles that can be used to measure the internal pressure of the gas. Compressive strain is observed around the cavities, with higher-order crystalline symmetries emerging near the cavity interfaces, suggesting paracrystalline ordering as a result of bubble coarsening. This ordering, along with a compressive strain gradient, indicates that gas bubbles induce significant localized changes in atomic packing. By analyzing strain fields with maximum compressive strains of 3%, we estimate a lower bound on the internal pressure of the bubbles at 2.5 GPa. These findings provide insight into the complex structural behavior of amorphous materials under stress, particularly in systems with gas inclusions, and offer new methods for probing the local atomic structure in disordered materials. Although considering structural heterogeneity in amorphous systems is non-trivial, these features have crucial impacts on material functionalities, such as mechanical strength, ionic conductivity, and electronic mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Solid breeder material crystal structure evolution due to Li burn up–Loss of crystal stability

Solid breeder materials for fusion power plants are subjected to extreme conditions of radiation damage, high temperature and designed component burn-up. Here, the loss of lattice stability of Li 2 TiO 3 due to Li burn-up was investigated using first principles-based approaches to aid evaluation of upper limit of component lifetime. The lattice stability is analyzed using calculated phonon dispersion in the Li 2 TiO 3 supercell, while Li burn-up is modeled by the introduction of Li-vacancies. It has been determined that the studied ceramic can be structurally stable up to ~40% of Li atoms burn-up. At 50% burn-up, the negative frequency branch in the phonon dispersion spectrum appears indicating the loss of lattice dynamical stability. Moreover, the structure obtained by introduction of unstable frozen phonons with minima energy amplitude also results in a phonon dispersion with negative branches in the structure obtained. Therefore, the system completely loses stability when approximately half of Li atoms are consumed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study

Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multichannel photoelectron phase lag across atomic barium autoionizing resonances

Phase lag associated with coherent control where an excited system decays into more than one product channel has been subjected to numerous investigations. Although previous theoretical studies have treated the phase lag across resonances in model calculations, quantitative agreement has never been achieved between the theoretical model and an experimental measurement of the phase lag from the ω-2ω ionization of atomic barium. Yamazaki and Elliot, Phys. Rev. Lett. 98, 053001 (2007); Phys. Rev. A 76, 053401 (2007), suggesting that a toy model with phenomenological parameters is inadequate to describe the observed phase lag behavior. Here the phase lag is treated quantitatively in a multichannel coupling formulation, and our calculation based on a multichannel quantum defect and R-matrix treatment achieves good agreement with the experimental observations. Our treatment also develops formulas to describe the effects of hyperfine depolarization on multiphoton ionization processes. Moreover, we identify resonances between Ba + 5d 3/2 and 5d 5/2 thresholds that have apparently never been experimentally observed and classified.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Binuclear Acetoniminato Derivatives of Iron and Chromium Carbonyls: A Theoretical Study

The structures and energetics of binuclear acetoniminato metal carbonyl derivatives of the types (Me 2 C═N) 2 Fe 2 (CO) n and (Me 2 C═N) 2 Cr 2 (CO) n have been investigated by density functional theory. The (Me 2 C═N) 2 Fe 2 (CO) 6 structure, with bridging Me 2 C═N ligands using only their nitrogen atoms to bridge an Fe═Fe bond related to experimentally known species, as well as a related (Me 2 C═N) 2 Cr 2 (CO) 8 structure, appear to be energetically preferred. Among carbonyl-richer systems, the iron system energetically prefers a {Me 2 C═NC(O)} 2 Fe 2 (CO) 6 structure with bridging Me 2 C═NC(O) ligands, whereas the chromium system energetically prefers a structure with a 2,3-diazabutadiene ligand having each nitrogen atom bonded to a Cr(CO) 5 moiety. Preferred structures for systems with fewer CO groups include the tetracarbonyl (Me 2 C═N) 2 Fe 2 (CO) 4 in which one of the bridging Me 2 C═N uses its C═N double bond to bond to an iron atom, as well as (Me 2 C═N)2Cr 2 (CO) n (n = 7, 6) structures with chromium–chromium multiple bonds bridged by Me2C═N groups.

Carbonyls↗
DOE OSTI2020

Modeling Molecules under Pressure with Gaussian Potentials

The computational modeling of molecules under high pressure is a growing research area that augments experimental high-pressure chemistry. Here, a new electronic structure method for modeling atoms and molecules under pressure, Gaussians On Surface Tesserae Simulate HYdrostatic Pressure (GOSTSHYP) approach, is introduced. In this method, a set of Gaussian potentials is distributed evenly on the van der Waals surface of the investigated chemical system, leading to a compression of the electron density and the atomic scaffold. Since no parameters other than pressure need to be specified, GOSTSHYP allows straightforward geometry optimizations and ab initio molecular dynamics simulations of chemical systems under pressure for nonexpert users. In this work, calculated energies, bond lengths, and dipole moments under pressure fall within the range of established computational methods for high-pressure chemistry. A Diels-Alder reaction and the cyclotrimerization of acetylene showcase the ability of GOSTSHYP to model pressure-induced chemical reactions. The connection to mechanochemistry is pointed out.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular dynamics simulations of displacement cascades in LiAlO2 and LiAl5O8 ceramics

Abstract Molecular dynamics was employed to investigate the radiation damage due to collision cascades in LiAlO 2 and LiAl 5 O 8 , the latter being a secondary phase formed in the former during irradiation. Atomic displacement cascades were simulated by initiating primary knock-on atoms (PKA) with energy values = 5, 10 and 15 keV and the damage was quantified by the number of Frenkel pairs formed for each species: Li, Al and O. The primary challenges of modeling an ionic system with and without a core–shell model for oxygen atoms were addressed and new findings on the radiation resistance of these ceramics are presented. The working of a variable timestep function and the kinetics in the background of the simulations have been elaborated to highlight the novelty of the simulation approach. More importantly, the key results indicated that LiAlO 2 experiences much more radiation damage than LiAl 5 O 8 , where the number of Li Frenkel pairs in LiAlO 2 was 3–5 times higher than in LiAl 5 O 8 while the number of Frenkel pairs for Al and O in LiAlO 2 are ~ 2 times higher than in LiAl 5 O 8 . The primary reason is high displacement threshold energies (E d ) in LiAl 5 O 8 for Li cations. The greater E d for Li imparts higher resistance to damage during the collision cascade and thus inhibits amorphization in LiAl 5 O 8 . The presented results suggest that LiAl 5 O 8 is likely to maintain structural integrity better than LiAlO 2 in the irradiation conditions studied in this work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Investigating phase transitions from local crystallographic analysis based on statistical learning of atomic environments in 2D MoS 2 -ReS 2

Traditionally, phase transitions are explored using a combination of macroscopic functional characterization and scattering techniques, providing insight into the average properties and symmetries of the lattice but local atomic level mechanisms during phase transitions generally remain unknown. Here, we explore the mechanisms of a phase transition between the trigonal prismatic and distorted octahedral phases of layered chalcogenides in the 2D MoS 2 - ReS 2 system from the observations of local degrees of freedom, namely atomic positions by Scanning Transmission Electron Microscopy (STEM). We employ local crystallographic analysis based on statistical learning of atomic environments to build a picture of the transition from the atomic level up and determine local and global variables controlling the local symmetry breaking. In particular, we argue that the dependence of the average symmetry breaking distortion amplitude on global and local concentration can be used to separate local chemical as well as global electronic effects on transition. This approach allows exploring atomic mechanisms beyond the traditional macroscopic descriptions, utilizing the imaging of compositional fluctuations in solids to explore phase transitions over a range of realized and observed local stoichiometries and atomic configurations.

25 ENERGY STORAGE↗
DOE OSTI2023

Thermodynamics and kinetics of Pb intercalation under graphene on SiC(0001)

SiC-supported graphene intercalated by a two-dimensional Pb monolayer can provide an appealing platform for spintronic applications. Such a monolayer structure is thermodynamically ultrastable, as observed in recent experiments. However, important fundamentals such as the structure of intercalated phases, locations of intercalated atoms, thermodynamic preference for intercalation, and intercalation pathways for this system have not yet been understood conclusively. Here, in this work, extensive density functional theory calculations are performed to assess Pb intercalation thermodynamics and kinetics under graphene on SiC(0001). We find that intercalation of isolated Pb atoms is strongly disfavored over adsorption on top of graphene. However, intercalation of complete Pb layers in the gallery between SiC and graphene buffer layer is strongly favored over supported Pb monolayers and moderately favored over formation of supported large three-dimensional Pb islands. We also find that initiation of intercalation either by individual Pb atoms directly penetrating graphene or by hopping under a static graphene step edge is energetically prohibitive at experimental temperatures. Consequently, more complex intercalation pathways are operative and further analyzed. We demonstrated that once an intercalated Pb monolayer forms around a graphene step edge, a facile Pb mass transport by Pb vacancy-mediated diffusion can be triggered for continued growth of the intercalated monolayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spin-squeezed Gottesman-Kitaev-Preskill codes for quantum error correction in atomic ensembles

Gottesman-Kitaev-Preskill (GKP) codes encode a qubit in displaced phase-space combs of a continuous-variable (CV) quantum system and are useful for correcting a variety of high-weight photonic errors. Here we propose atomic ensemble analogs of the single-mode CV GKP code by using the quantum central limit theorem to pull back the phase-space structure of a CV system to the compact phase space of a quantum spin system. We study the optimal recovery performance of these codes under error channels described by stochastic relaxation and isotropic ballistic dephasing processes using the diversity combining approach for calculating channel fidelity. Additionally, we find that the spin GKP codes outperform other spin system codes such as cat codes or binomial codes. Our spin GKP codes based on the two-axis countertwisting interaction and superpositions of SU(2) coherent states are direct spin analogs of the finite-energy CV GKP codes, whereas our codes based on one-axis twisting do not yet have well-studied CV analogs. A state preparation scheme for the spin GKP codes is proposed which uses the linear-combination-of-unitaries method, applicable to both the CV and spin GKP settings. Finally, we discuss a fault-tolerant approximate gate set for quantum computing with spin-GKP-encoded qubits, obtained by translating gates from the CV GKP setting using the quantum central limit theorem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Tailoring Local Chemical Ordering via Elemental Tuning in High-Entropy Alloys

Due to the large multi-elemental space desired for property screening and optimization, high-entropy alloys (HEAs) hold greater potential over conventional alloys for a range of applications, such as structural materials, energy conversion, and catalysis. However, the relationship between the HEA composition and its local structural/elemental configuration is not well understood, particularly in noble-metal-based HEA nanomaterials, hindering the design and development of nano-HEAs in energy conversion and catalysis applications. In this work, we determined precise atomic-level structural and elemental arrangements in model HEAs composed of RhPtPdFeCo and RuPtPdFeCo to unveil their local characteristics. Notably, by changing just one constituent element in the HEA (Rh to Ru), we found dramatic changes in the elemental arrangement from complete random mixing to a local single elemental ordering feature. Additionally, we demonstrate that the local ordering in RuPtPdFeCo can be further controlled by varying the Ru concentration, allowing us to toggle between local Ru clustering and distinct heterostructures in multicomponent systems. Overall, our study presents a practical approach for manipulating local atomic structures and elemental arrangements in noble-metal-based HEA systems, which could provide in-depth knowledge to mechanistically understand the functionality of noble-metal-based HEA nanomaterials in practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗