Search NASA⌕ Search

SEARCH · Search NASA

Results for “content analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Precision Measurement of Black Hole Binary Dynamics: Analyzing the LISA Data Stream

One of the richest potential sources of insight into fundamental physics that LISA will be capable of observing is the inspiral of supermassive black hole binaries (BHBs). However, the data analysis challenge presented by the LISA data stream is quite unlike the situation for present day gravitational wave detectors. In order to make the precision measurements necessary to achieve LISA's science goals, the BHB signal must be distinguished from a data stream that not only contains instrumental noise, but potentially thousands of other signals as well, so that the "background" we wish to separate out to focus on the BHB signal is likely to be highly nonstationary and nongaussian, as well as being of scientific interest in its own right. In addition, whereas the theoretical templates that we calculate in order to ultimately estimate the parameters can afford to be somewhat inaccurate and still be effective for present day and near future detectors, this is not the case for LISA, and extremely high fidelity of the theoretical templates for high signal-to-noise signals will be required to prevent theoretical errors from dominating the parameter estimates. NVe, will describe efforts in the community of LISA data analysts to address the challenges regarding the specific issue of BHB signals. These efforts include using a Markov Chain Monte Carlo approach with the freedom to model the BHB and the other signals present in the data stream simultaneously, rather than trying to remove other signals and risk biasing the remaining data. The Mock LISA Data Challenge is a community of LISA scientists who generate rounds of simulated LISA noise with increasingly difficult signal content, and invite the LISA data analysis community to exercise their methods, or develop new methods, in an attempt to extract the parameters for the signals embedded in the mock data. In addition to practical approaches such ,is this to assess the level of parameter accuracy, one can apply the Fisher matrix formalism to assess both the statistical errors from noise and the theoretical errors

McWilliams, Sean T.↗

Assimilation of SMAP Observations Over Land Improves the Simulation and Prediction of Tropical Cyclone Idai

This work is focused on the role of soil moisture in the prediction of tropical cyclones (TCs) approaching land and after landfall. Soil moisture conditions can impact the circulation and structure of an existing tropical cyclone (TC) when part or all of the circulation is over land. For example, dry land surface conditions may lead to faster dissipation of a TC over land (often associated with changes in precipitation structure), whereas very wet conditions may help sustain or in rare cases re-intensify a TC. Moreover, the presence of strong soil moisture gradients may affect the symmetry and development of the TC circulation leading to changes in its over-land track. While the link between soil moisture conditions and TC evolution in proximity to land is relatively well understood in theory, applications of these findings in the context of numerical weather prediction (NWP) have been limited. Here we present a case study that explores the potential of improving TC predictions through an improved soil moisture initialization in an NWP framework. Specifically, we examine the impact of assimilating observations from the NASA Soil Moisture Active Passive (SMAP) mission into the NASA Goddard Earth Observing System (GEOS) global weather model on the prediction of South-West Indian Ocean TC Idai (2019). SMAP provides accurate L-band (1.4 GHz) brightness temperatures (Tb) observations that are sensitive to soil moisture globally and at high revisit times of 2-3 days. It has previously been shown that the assimilation of SMAP Tb observations significantly improves modeled land surface states. Thus, it is expected that SMAP can be used to constrain land surface initial conditions and potentially benefit TC forecasts. Here we present two sets of retrospective forecasts of TC Idai that are compared in an Observing System Experiment framework at ¼ degree resolution: (i) forecasts initialized from an analysis that is comparable to the GEOS operational analysis (without SMAP Tb assimilation) and (ii) forecasts initialized from an analysis that additionally assimilates SMAP brightness temperature observations over land using a weakly-coupled land analysis. We find that the assimilation of SMAP meaningfully improves the representation of TC Idai’s structure as well as the prediction of its intensity and track. The analyzed TC size, as measured by the wind speed radius, is improved by up to 18% in the analysis with SMAP assimilation relative to the control run. The forecast intensity error, measured against the observed intensity, is reduced by up to 23%. At the 1/4-degree resolution used here, GEOS unavoidably under-estimates TC intensity and over-estimates TC size. The SMAP assimilation therefore corrects the model in the right direction, leading to a storm that is more energetic and more compact. Furthermore, we find that the along-track forecast error is reduced by up to 34%, indicating a more accurate propagation speed, which is consistent with the fact that TC speed over land is strongly affected by surface processes. The impact of SMAP assimilation on the forecast cross-track error is neutral. Across the TC forecast skill metrics used here, the improvements from SMAP DA are largest at lead times of 36 to 72 hours, suggesting that the predictability of forecasts at shorter lead times may be dominated by short-term convective processes, while the land and its longer memory gains in importance as a source of predictability on a 2-3 day timescale. We further investigated the underlying mechanisms leading to the skill improvements from SMAP data assimilation by isolating the land areas that directly influence TC Idai using a back trajectory analysis. We find that the assimilation of SMAP leads to wetter soil moisture conditions that cause an increased latent heat flux, which ultimately results in TC analyzed representation that has higher column-integrated total moisture content and total energy compared to the analysis in the control run without SMAP assimilation. Overall, the results highlight that the assimilation of SMAP observations into a global numerical weather prediction model can lead to pronounced improvements of TC predictions. This is a crucial step towards a better mitigation of the socio-economic impact of landfalling TCs and thus safeguarding human lives. Finally, our study presents an event-based approach that assesses the impact of land data assimilation for a particular weather event rather than by globally averaging differences in skill. We argue that global skill assessments – while necessary – can mute the impact of land data assimilation, because the land’s influence on the atmosphere is constrained to certain locations and certain times. Instead, the event-based approach better highlights the true potential of land data assimilation in the context of NWP, especially for extreme events when accurate predictions are critical.

Jana Kolassa↗

Assimilation of SMAP Observations Over Land Improves the Simulation and Prediction of Tropical Cyclone Idai

This work is focused on the role of soil moisture in the prediction of tropical cyclones (TCs) approaching land and after landfall. Soil moisture conditions can impact the circulation and structure of an existing tropical cyclone (TC) when part or all of the circulation is over land. For example, dry land surface conditions may lead to faster dissipation of a TC over land (often associated with changes in precipitation structure), whereas very wet conditions may help sustain or in rare cases re-intensify a TC. Moreover, the presence of strong soil moisture gradients may affect the symmetry and development of the TC circulation leading to changes in its over-land track. While the link between soil moisture conditions and TC evolution in proximity to land is relatively well understood in theory, applications of these findings in the context of numerical weather prediction (NWP) have been limited. Here we present a case study that explores the potential of improving TC predictions through an improved soil moisture initialization in an NWP framework. Specifically, we examine the impact of assimilating observations from the NASA Soil Moisture Active Passive (SMAP) mission into the NASA Goddard Earth Observing System (GEOS) global weather model on the prediction of South-West Indian Ocean TC Idai (2019). SMAP provides accurate L-band (1.4 GHz) brightness temperatures (Tb) observations that are sensitive to soil moisture globally and at high revisit times of 2-3 days. It has previously been shown that the assimilation of SMAP Tb observations significantly improves modeled land surface states. Thus, it is expected that SMAP can be used to constrain land surface initial conditions and potentially benefit TC forecasts. Here we present two sets of retrospective forecasts of TC Idai that are compared in an Observing System Experiment framework at ¼ degree resolution: (i) forecasts initialized from an analysis that is comparable to the GEOS operational analysis (without SMAP Tb assimilation) and (ii) forecasts initialized from an analysis that additionally assimilates SMAP brightness temperature observations over land using a weakly-coupled land analysis. We find that the assimilation of SMAP meaningfully improves the representation of TC Idai’s structure as well as the prediction of its intensity and track. The analyzed TC size, as measured by the wind speed radius, is improved by up to 18% in the analysis with SMAP assimilation relative to the control run. The forecast intensity error, measured against the observed intensity, is reduced by up to 23%. At the 1/4-degree resolution used here, GEOS unavoidably under-estimates TC intensity and over-estimates TC size. The SMAP assimilation therefore corrects the model in the right direction, leading to a storm that is more energetic and more compact. Furthermore, we find that the along-track forecast error is reduced by up to 34%, indicating a more accurate propagation speed, which is consistent with the fact that TC speed over land is strongly affected by surface processes. The impact of SMAP assimilation on the forecast cross-track error is neutral. Across the TC forecast skill metrics used here, the improvements from SMAP DA are largest at lead times of 36 to 72 hours, suggesting that the predictability of forecasts at shorter lead times may be dominated by short-term convective processes, while the land and its longer memory gains in importance as a source of predictability on a 2-3 day timescale. We further investigated the underlying mechanisms leading to the skill improvements from SMAP data assimilation by isolating the land areas that directly influence TC Idai using a back trajectory analysis. We find that the assimilation of SMAP leads to wetter soil moisture conditions that cause an increased latent heat flux, which ultimately results in TC analyzed representation that has higher column-integrated total moisture content and total energy compared to the analysis in the control run without SMAP assimilation. Overall, the results highlight that the assimilation of SMAP observations into a global numerical weather prediction model can lead to pronounced improvements of TC predictions. This is a crucial step towards a better mitigation of the socio-economic impact of landfalling TCs and thus safeguarding human lives. Finally, our study presents an event-based approach that assesses the impact of land data assimilation for a particular weather event rather than by globally averaging differences in skill. We argue that global skill assessments – while necessary – can mute the impact of land data assimilation, because the land’s influence on the atmosphere is constrained to certain locations and certain times. Instead, the event-based approach better highlights the true potential of land data assimilation in the context of NWP, especially for extreme events when accurate predictions are critical.

Jana Kolassa↗

XRD micro-XANES EMPA and SIMS investigation on phlogopite single crystals from Mt. Vulture (Italy)

Selected phlogopite flakes from Mt. Vulture in southern Italy were studied using a combination of single-crystal techniques: electron microprobe analysis (EMPA), secondary ion mass spectrometry (SIMS), single-crystal X-ray diffraction (SCXRD), and micro-X-ray absorption near-edge spectroscopy (XANES). The latter technique was employed to analyze the structure of the Fe-K absorption edge over the region from 7080-8100 eV and to determine Fe{sup 3+}/{Sigma}Fe at a micrometer scale, albeit with large error bars due to known effects of orientation on pre-edge energy. The annite component, Fe/(Mg+Fe), of the samples studied ranged from 0.16 to 0.31, the Ti content from 0.11 to 0.27 atoms per formula unit (apfu) and the Ba content from 0.03 to 0.09 apfu. SIMS analysis showed H{sub 2}O (wt%) = 1.81-3.30, F (wt%) = 0.44-1.29, and Li{sub 2}O (wt%) = 0.001-0.027. The intra single-crystal chemical variability for major/minor elements (Mg, Fe, Al, Ba, Ti, and K) was found particularly significant for samples VUT191{_}11 and PG5{_}1, less significant for the other samples of the set. SIMS data relative to crystals VUT187{_}24, VUT191{_}10, VUT191{_}11, and VUT187{_}28 showed a noteworthy variation in the concentrations of some light elements (H, Li, and F) with coefficient of variation CV (as 1{sigma}%) up to {approx}18% for H{sub 2}O. The analyzed micas belong to the 1M polytype. Structure refinements using anisotropic displacement parameters were performed in space group C2/m and converged at 3.08 {<=} R {<=} 3.63, 3.32 {<=} R{sub w} {<=} 3.98%. Micro-XANES results yielded Fe{sup 3+}/{Sigma}Fe from 51-93%. Previous Moessbauer data from powdered samples suggested Fe{sup 3+}/{Sigma}Fe values ranging from 49-87%. However, the Fe{sup 3+} content determined by both techniques is sometimes remarkably different, in part because of the large errors ({+-}10-15%) presently associated with the micro-XANES technique and in part because the Fe{sup 3+} content of a single crystal may significantly depart from the average value obtained from routine Moessbauer analysis. The combination of EMPA, SIMS, and micro-XANES resulted in the characterization of the samples at a comparable spatial scale. By means of in-situ data and the results of crystallographic investigations, the occurrence of different relative amounts of M{sup 3+}-oxy [{sup VI}M{sup 2+} + (OH){sup -} {leftrightarrow} {sup VI}M{sup 3+} + O{sup 2-} + {1/2}H{sub 2}{up_arrow}], Ti-oxy substitutions [{sup VI}M{sup 2+} + 2(OH){sup -} {leftrightarrow} {sup VI}Ti{sup 4+} + 2O{sup 2-} + H{sub 2}{up_arrow}], and Ti-vacancy ({open_square}) substitution (2{sup VI}M{sup 2+} {leftrightarrow} {sup VI}Ti{sup 4+} + {sup VI}{open_square}) was ascertained for the studied samples.

58 GEOSCIENCES↗

Oxidation kinetics of biochar from woody and herbaceous biomass

The goal of this study was to determine oxidation kinetics for biochar produced from fast pyrolysis of various biomass feedstocks. In particular, the role of inherent ash content on the oxidation rate was evaluated. Thermogravimetric analysis (TGA) and fluidized bed combustion experiments were used to explore oxidation kinetics of six fast pyrolysis produced biochars with diverse ash content. Here, the reaction rates varied by a factor of three under chemical kinetic-limited conditions, demonstrating inorganic content impacts oxidation rate. Chemical kinetic rate coefficients were proposed as a function of compositional parameters to determine overall fit and impact. Potassium content was found to have a positive correlation, best describing the differences in the oxidation kinetic rate coefficients. Additionally, feedstocks were subjected to a 1 M HCl acid wash mitigating the catalytic activity of the metals. Acid washed biochars had lower oxidation kinetic rates compared to their unwashed counterparts, indicating the removal of catalytically active metals reduced oxidation rate. Gas composition (CO/CO 2 ) was measured during fluidized bed experiments for both acid-washed and unwashed biochars, which varied between the six biochars. Formation of CO 2 was greatly affected by catalytic metals, finding potassium content to correlate well with a higher percentage of CO 2 formation as compared to CO. Comparison of oxidation rates were made between the two experimental apparatuses to measure the effect of attrition on biochar oxidation.

09 BIOMASS FUELS↗

Analytical Results for MOX Colemanite Samples Received on July 22, 2013

The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the boron oxide content of the colemanite raw aggregate material prior to it being mixed into the concrete. SRNL received ten samples of colemanite for analysis on July 22, 2013. The elemental boron content of each sample was measured according to ASTM C 1301. The boron oxide content was calculated using the oxide conversion factor for boron.

36 MATERIALS SCIENCE↗

Analytical Results for MOX Colemanite Samples Received on July 22, 2013

The Mixed Oxide Fuel Fabrication Facility (MFFF) will use colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses and shielding operators from radiation. The Savannah River National Laboratory (SRNL) is tasked with measuring the boron oxide content of the colemanite raw aggregate material prior to it being mixed into the concrete. SRNL received ten samples of colemanite for analysis on July 22, 2013. The elemental boron content of each sample was measured according to ASTM C 1301. The boron oxide content was calculated using the oxide conversion factor for boron.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sealed-tube synthesis and phase diagram of Li{sub x}TiS{sub 2} (0 ≤ x ≤1)

Graphical abstract: We reported a new method to prepare Li{sub x}TiS{sub 2} (0 ≤ x ≤ 1) at 600 °C in sealed tube using Li{sub 2}S aslithium source. A schematic phase diagram of the Li{sub x}TiS{sub 2} system has been constructed based on the DTA and XRD data. - Abstract: We reported a new method to prepare Li{sub x}TiS{sub 2} (0 ≤ x ≤ 1) at 600 °C in sealed tube using Li{sub 2}S as lithium source. The Li{sub x}TiS{sub 2} samples were characterized by powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and differential thermal analysis. The variations of the lattice parameters with lithium content x in Li{sub x}TiS{sub 2} were determined by X-ray powder diffraction analysis for both 1T and 3R phases. The phase transition between low-temperature 1T phase and high-temperature 3R phase was confirmed by the powder X-ray diffraction analysis. Based on the differential thermal analysis and X-ray diffraction results, a schematic phase diagram of the Li{sub x}TiS{sub 2} system has been constructed, providing a guideline to synthesize Li{sub x}TiS{sub 2} in 1T structure or 3R structure.

36 MATERIALS SCIENCE↗

Bulk density, grain size, carbon content and isotopes, and nitrogen content of floodplain sediment along the Koyukuk River, Alaska collected in Summer 2018.

The dataset is comprised of grain size, bulk density, carbon and nitrogen content, stable carbon isotopes, and radiocarbon content of soils sampled on the floodplain of the Koyukuk River near Huslia, AK. This dataset was collected to characterize sediment properties and floodplain organic carbon stocks in the discontinuous permafrost floodplain of the Koyukuk River. The data help quantify the flux and storage of sediment and carbon between the Koyukuk River and the surrounding floodplain as the river migrates laterally. The samples were collected in June 27 - July 9, 2018. The soil samples come from a total of 24 locations and were sampled in the upper 490 cm of the river cutbanks, point bars, and floodplain. Samples were analyzed for bulk density, full particle size distribution, nitrogen content and carbon content and isotopes, though not all samples were included in each analysis. An additional 10 samples of floodplain woody debris were measured for radiocarbon content. Data, detailed methods, analyses, and interpretations were previously published at: Douglas, M. M., Lingappa, U. F., Lamb, M. P., Rowland, J. C., West, A. J., Li, G., et al. (2021). Impact of river channel lateral migration on microbial communities across a discontinuous permafrost floodplain. Applied and Environmental Microbiology, 87(20), AEM.01339-21. https://doi.org/10.1128/AEM.01339-21 Douglas, M. M., Li, G. K., Fischer, W. W., Rowland, J. C., Kemeny, P. C., West, A. J., et al. (2022). Organic carbon burial by river meandering partially offsets bank erosion carbon fluxes in a discontinuous permafrost floodplain. Earth Surface Dynamics, 10(3), 421–435. https://doi.org/10.5194/esurf-10-421-2022 The dataset is comprised of a total of three separate data files based on the sample type and analysis, including a file that lists the sample locations, permafrost presence, and geomorphic landform.

54 ENVIRONMENTAL SCIENCES↗

Proximate analysis of coal

This lab experiment illustrates the use of thermogravimetric analysis (TGA) to perform proximate analysis on a series of coal samples of different rank. Peat and coke are also examined. A total of four exercises are described. These are dry exercises as students interpret previously recorded scans. The weight percent moisture, volatile matter, fixed carbon, and ash content are determined for each sample and comparisons are made. Proximate analysis is performed on a coal sample from a local electric utility. From the weight percent sulfur found in the coal (determined by a separate procedure the Eschka method) and the ash content, students calculate the quantity of sulfur dioxide emissions and ash produced annually by a large coal-fired electric power plant.

01 COAL, LIGNITE, AND PEAT↗

Mitigation of variable seasonal productivity in algae biomass through blending and ensiling: An assessment of compositional changes in storage

Microalgae biomass has gained considerable attention in recent years as an attractive feedstock for biofuel production. However, seasonal variability in algae growth presents a challenge to delivering a consistent feedstock supply to a conversion facility. Drying is one approach to preserving algae produced in productive summer months for conversion in winter, but is energy intensive and costly. Ensiling is an alternative to drying that preserves algae in wet anaerobic conditions in the presence of organic acids. We have previously demonstrated that dry matter loss of algae:corn stover blends can be limited to 8% over 35 days using this approach. However, longer storage durations will be required to maintain a consistent feedstock supply to a biorefinery. Furthermore, the impacts to biomass quality that occur during storage are unknown. A Box-Behnken design of experiment was conducted to determine the influence of moisture, soluble sugar, and algae content on dry matter loss of algae:corn stover blends in wet anaerobic storage over a 30-day period. Using one-way analysis of variance (ANOVA) moisture and soluble sugar content were found to significantly affect dry matter loss in storage. The results of experimental design were then used to inform the initiation of a 180 day storage study that evaluated the storage performance and biomass composition of algae:corn stover blends containing 5, 20 or 40% algae. After 180 days of storage dry matter loss ranged from 6 – 17%. A relative increase in nitrogen content of stored blends indicates that protein content was unaffected by storage, while the carbohydrate fraction was most impacted, decreasing by 5 – 15%. For each stored blend the oxygen content decreased in storage resulting increased higher heating values (HHV). As a result, the impact that changes to biochemical and elemental composition of algae:corn stover blends has on biomass conversion to fuels and chemicals is discussed.

09 BIOMASS FUELS↗

Arabidopsis GALACTURONOSYLTRANSFERASE (GAUT) 1 synthesizes a homogalacturonan tightly bound to the cell wall and required for cell expansion

Arabidopsis GALACTURONOSYLTRANSFERASE1 (GAUT1) synthesizes homogalacturonan (HG), the most abundant pectin in growing plant cells. GAUT1 has the greatest in vitro enzyme activity of the six confirmed Arabidopsis HG biosynthetic GAUTs, but its biological activity remains elusive. Here we show that Arabidopsis GAUT1 homozygous mutants have a severe dwarfed seedling phenotype, survive several weeks as 2 to 3 mm seedlings, and have severely reduced shoot and root growth and hypocotyl epidermal, cortex and endodermal cell size. gaut1-1 pollen tubes are shorter than WT with increased bursting. Complementation of homozygous gaut1-1 with GAUT1 coding sequence driven by the GAUT1 promoter restored WT-like growth. The extreme dwarf phenotype of homozygous gaut1-1 seedlings precluded their use for detailed cell wall analysis, thus suspensions cultures were produced from callus generated from mutant and WT seedlings. Homozygous gaut1-1 suspension cells were smaller than WT with ∼30% reduced wall GalA content compared to WT. Sequential extraction of the walls with increasingly harsh solvents and sugar composition analysis revealed reduced GalA content in only the 4M KOH post-chlorite fraction, indicating that GAUT1-synthesized HG was held tightly in the wall by direct or indirect hydrogen bonding and/or oxidation-sensitive linkages. Treatment of wall fractions with endopolygalacturonase to hydrolyze HG and gel electrophoretic separation of hydrolysates exposed an HG-associated doublet band markedly downregulated in the homozygous gaut1-1 4M KOH post-chlorite fraction and to a lesser extent in 4M KOH and sodium chlorite fractions. NMR analysis identified the band as rhamnogalacturonan (RG)-II. Super resolution microscopy using anti-HG antibodies showed that, compared to WT, the homozygous gaut1-1 hypocotyl epidermal and callus cells had reduced content and length of HG nanofilaments, HG fibers associated with cell expansion in Arabidopsis. The results demonstrate that GAUT1-synthesized HG resides in a tightly-cell-wall-bound, RG-II-containing polymer required for HG nanofilament formation and seedling cell expansion.

Atmodjo↗

Horizontal gene transfer in Fungi

Horizontal gene transfer (HGT), the sharing of genes between species outside of inheritance, is a common feature among prokaryotes, but a growing body of evidence supports HGT in eukaryotic genomes. The driving forces behind horizontal gene transfer occur within a shared environment, and are selective—meaning they improve survivability of stress, increase nutrient access, or provide an evolutionary advantage. The development of toxic and pathogenic properties was one of the first indications of phenotypic transfer among fungal species. An growing species diversity of genome sequences has brought a new set of tools to tracking HGT. The detection of HGT based on sequence similarity utilizes species tree phylogenies, which compare similarity of core conserved genes to determine lineage. Divergence of an HGT candidate gene from a phylogenetic background tree can show inter-species DNA transfer. It is by following phenotypes and analysis of DNA sequence context and content that we can uncover previous transfer events, and track lab fostered and recorded HGT. Evidence of HGT is found heavily in parasitic and pathogenic fungi; both of these lifestyles rely on phagocytosis and assimilation of host parts and pieces, suggesting phagocytosis is implicated in DNA uptake mechanisms. Our understanding of the molecular mechanisms of DNA uptake and incorporation of foreign DNA into fungal genomes, i.e. natural competence, remain based on a set of laboratory conditions used in molecular transformation. The mechanism of DNA uptake in the natural world and new DNA incorporation remain under investigation.

Bredeweg, Erin L.↗

The Influence of Sulfur Content on the Carbothermal Reduction of SiMn Slag

This article examines the influence of sulfur content on the carbothermal reduction of MnO and SiO{sub 2} in SiMn slag by carbon black. The sulfur content in the synthetic slag is varied from 0 to 1.0 wt pct. Reduction experiments are carried out in a thermogravimetric (TG) furnace at 1873 K (1600 °C) under CO atmospheric pressure. The reduction rates are measured based on the weight loss data, and the samples are characterized by SEM/EDS and ICP-MS. The wetting property of slag on carbon black is also studied with the sessile drop technique. The reaction rate on the slag-metal interface is one order higher than on the slag-carbon interface. A small amount of sulfur (0.2 and 0.44 wt pct) accelerates the slag-metal reaction rate constant by 2.2 and 4.2 times, respectively. Therefore, small amounts of sulfur in slag significantly improve the reduction of MnO and SiO{sub 2}. The MnS precipitation phenomenon during slag cooling is studied by FactSage simulation and experimental verification.

36 MATERIALS SCIENCE↗

Strain energy-based fatigue failure analyses of LB-PBF Inconel 718: Effect of build orientation

Additively manufactured Inconel 718 parts fabricated in three build orientations (horizontal, vertical, and angled at 45 degrees) are tested in fully-reversed bending fatigue mode. Damping measurements via the Impulse Excitation technique are used to assess the defects content in the microstructure and fractography analysis is performed to detect the root cause of failure. Two micro- and macro-scale methodologies of fatigue damage estimation based on the dissipated heat per cycle and the statistical estimation of micro-plastic strain energies are used to assess fatigue damage. It is shown that at a given stress level, the vertically built specimens endure the most fatigue damage before failure while the diagonally built ones sustain the least. As a result, the fatigue life is estimated for arbitrary load amplitudes via a microstructure-sensitive algorithm with acceptable accuracy as compared to the experiments.

36 MATERIALS SCIENCE↗

Scavenger receptor class B type 1 regulates neuroblastoma cell proliferation, migration and invasion

Neuroblastoma (NB) is an extra cranial pediatric embryonal tumor most prevalent in children less than 1 year of age. NB accounts for 7% of all pediatric cancers but accounts for 15% of all childhood cancer deaths. Scavenger receptor class B type 1 (SR-B1), a mediator of cellular cholesterol uptake, is overexpressed in and have been linked to the aggressiveness of many cancers. Nevertheless, no studies have so far investigated the relationship between SR-B1 and NB. Elucidation of receptors that promote NB may pave the way for discovery of new therapeutic targets. Here we show that inhibition of SR-B1 reduced cell survival, migration and invasion, and cholesterol content in NB cell lines. Additionally analysis of SR-B1 levels in NB patient biopsies using the R2: Genomics Analysis and Visualization Platform showed that high SR-B1 expression correlated with decreased overall and event-free survival.

60 APPLIED LIFE SCIENCES↗

Quantification of the degree of reaction of fly ash

The quantification of the fly ash (FA) in FA blended cements is an important parameter to understand the effect of the fly ash on the hydration of OPC and on the microstructural development. The FA reaction in two different blended OPC-FA systems was studied using a selective dissolution technique based on EDTA/NaOH, diluted NaOH solution, the portlandite content and by backscattered electron image analysis. The amount of FA determined by selective dissolution using EDTA/NaOH is found to be associated with a significant possible error as different assumptions lead to large differences in the estimate of FA reacted. In addition, at longer hydration times, the reaction of the FA is underestimated by this method due to the presence of non-dissolved hydrates and MgO rich particles. The dissolution of FA in diluted NaOH solution agreed during the first days well with the dissolution as observed by image analysis. At 28 days and longer, the formation of hydrates in the diluted solutions leads to an underestimation. Image analysis appears to give consistent results and to be most reliable technique studied.

36 MATERIALS SCIENCE↗