Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

ANALYSIS OF OPTICAL Fe II EMISSION IN A SAMPLE OF ACTIVE GALACTIC NUCLEUS SPECTRA

We present a study of optical Fe II emission in 302 active galactic nuclei (AGNs) selected from the Sloan Digital Sky Survey. We group the strongest Fe II multiplets into three groups according to the lower term of the transition (b{sup 4} F, a{sup 6} S, and a{sup 4} G terms). These approximately correspond to the blue, central, and red parts, respectively, of the 'iron shelf' around H{beta}. We calculate an Fe II template that takes into account transitions into these three terms and an additional group of lines, based on a reconstruction of the spectrum of I Zw 1. This Fe II template gives a more precise fit of the Fe II lines in broad-line AGNs than other templates. We extract Fe II, H{alpha}, H{beta}, [O III], and [N II] emission parameters and investigate correlations between them. We find that Fe II lines probably originate in an intermediate line region. We note that the blue, red, and central parts of the iron shelf have different relative intensities in different objects. Their ratios depend on continuum luminosity, FWHM H{beta}, the velocity shift of Fe II, and the H{alpha}/H{beta} flux ratio. We examine the dependence of the well-known anti-correlation between the equivalent widths of Fe II and [O III] on continuum luminosity. We find that there is a Baldwin effect for [O III] but an inverse Baldwin effect for the Fe II emission. The [O III]/Fe II ratio thus decreases with L {sub {lambda}5100}. Since the ratio is a major component of the Boroson and Green Eigenvector 1 (EV1), this implies a connection between the Baldwin effect and EV1 and could be connected with AGN evolution. We find that spectra are different for H{beta} FWHMs greater and less than {approx}3000 km s{sup -1}, and that there are different correlation coefficients between the parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

LONG-TERM OPTICAL POLARIZATION VARIABILITY OF THE TeV BLAZAR 1ES 1959+650

A detailed analysis of the optical polarimetric variability of the TeV blazar 1ES 1959+650 from 2007 October 18 to 2011 May 5 is presented. The source showed maximum and minimum brightness states in the R band of 14.08 {+-} 0.03 mag and 15.20 {+-} 0.03 mag, respectively, with a maximum variation of 1.12 mag, and a maximum polarization degree of P = (12.2 {+-} 0.7)%, with a maximum variation of 10.7%. From 2009 August to November, a correlation between the optical R-band flux and the degree of linear polarization was found with a correlation coefficient r {sub pol} = 0.984 {+-} 0.025. The source presented a preferential position angle of optical polarization of {approx}153 Degree-Sign , with variations of 10 Degree-Sign -50 Degree-Sign , which is in agreement with the projected position angle of the parsec-scale jet found at 43 GHz. From the Stokes parameters we infer the existence of two optically thin synchrotron components that contribute to the polarized flux. One of them is stable with a constant polarization degree of 4%. Assuming a stationary shock for the variable component, we estimated some parameters associated with the physics of the relativistic jet: the magnetic field, B {approx} 0.06 G, the Doppler factor, {delta}{sub 0} {approx} 23, the viewing angle, {Phi} {approx} 2. Degree-Sign 4, and the size of the emission region r{sub b} {approx} 5.6 Multiplication-Sign 10{sup 17} cm. Our study is consistent with the spine-sheath model of explaining the polarimetric variability displayed by this source during our monitoring.

79 ASTRONOMY AND ASTROPHYSICS↗

High-resolution velocimetry in energetic tidal currents using a convergent-beam acoustic Doppler profiler

An array of convergent acoustic Doppler velocimeters has been developed and tested for the high resolution measurement of three-dimensional tidal flow velocities in an energetic tidal site. This configuration has been developed to increase spatial resolution of velocity measurements in comparison to conventional acoustic Doppler profilers (ADPs) which characteristically use diverging acoustic beams emanating from a single instrument. This is achieved using converging acoustic beams with a sample volume at the focal point of 0.03 m 3 . The array is also able to simultaneously measure three-dimensional velocity components in a profile throughout the water column, and as such is referred to herein as a converging-beam acoustic Doppler profiler (CADP). Mid-depth profiling is achieved through integration of the sensor platform with the operational Alstom 1MW DeepGen-IV Tidal Turbine. This proof-of-concept paper outlines system configuration and comparison to measurements provided by co-installed reference instrumentation. Comparison of CADP to standard ADP velocity measurements reveals a mean difference of 8 mm/s, standard deviation of 18 mm/s, and order-of-magnitude reduction in realizable length-scale. CADP focal point measurements compared to a proximal single-beam reference show peak cross-correlation coefficient of 0.96 over 4.0 s averaging period and a 47% reduction in Doppler noise. The dual functionality of the CADP as a profiling instrument with a high resolution focal point make this configuration a unique and valuable advancement in underwater velocimetry enabling improved turbulence, resource and structural loading quantification and validation of numerical simulations. Alternative modes of operation have been implemented including noise-reducing bi-static sampling. Since waves are simultaneously measured it is expected that derivatives of this system will be a powerful tool in wave-current interaction studies.

47 OTHER INSTRUMENTATION↗

Atomistic study of multimechanism diffusion by self-interstitial defects in -Fe.

We present the results of an extensive molecular dynamics study of self-interstitial atom (SIA) clusters containing up to 37 defects over a wide range of temperatures in iron. A long simulation time and high statistics of defect jumps allowed a detailed treatment of the data to be performed. Diffusion exhibits a change in mechanism from three-dimensional to one-dimensional for clusters of 4-7 SIAs. Stable sessile configurations present in the diffusion process are described and their influence on the diffusion parameters is discussed. Diffusion coefficients, correlation factors estimated, and mechanisms observed, are compared with previously published results, and the influence of the interatomic potential is considered.

36 MATERIALS SCIENCE↗

Seasonal Variation of the Underground Cosmic Muon Flux Observed at Daya Bay

The Daya Bay Experiment consists of eight identically designed detectors located in three underground experimental halls named as EH1, EH2, EH3, with 250, 265 and 860 meters of water equivalent vertical overburden, respectively. Cosmic muon events have been recorded over a two-year period. The underground muon rate is observed to be positively correlated with the effective atmospheric temperature and to follow a seasonal modulation pattern. Here, the correlation coefficient α, describing how a variation in the muon rate relates to a variation in the effective atmospheric temperature, is found to be α EH1 = 0.362 ± 0.031, α EH2 = 0.433 ± 0.038 and α EH3 = 0.641 ± 0.057 for each experimental hall.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A gradient based method for modeling baryons and matter in halos of fast simulations

Fast N-body PM simulations with a small number of time steps such as FastPM or COLA have been remarkably successful in modeling the galaxy statistics, but their lack of small scale force resolution and long time steps cannot give accurate halo matter profiles or matter power spectrum. High resolution N-body simulations can improve on this, but lack baryonic effects, which can only be properly included in hydro simulations. Here we present a scheme to calibrate the fast simulations to mimic the precision of the hydrodynamic simulations or high resolution N-body simulations. The scheme is based on a gradient descent of either effective gravitational potential, which mimics the short range force, or of effective enthalpy, which mimics gas hydrodynamics and feedback. The scheme is fast and differentiable, and can be incorporated as a post-processing step into any simulation. It gives very good results for the matter power spectrum for several of the baryonic feedback and dark matter simulations, and also gives improved dark matter halo profiles. The scheme is even able to find the large subhalos, and increase the correlation coefficient between the fast simulations and the high resolution N-body or hydro simulations. It can also be used to add baryonic effects to the high resolution N-body simulations. While the method has free parameters that can be calibrated on various simulations, they can also be viewed as astrophysical nuisance parameters describing baryonic effects that can be marginalized over during the data analysis. In this view these parameters can be viewed as an efficient parametrization of baryonic effects.

79 ASTRONOMY AND ASTROPHYSICS↗

High mass and halo resolution from fast low resolution simulations

Generating mocks for future sky surveys requires large volumes and high resolutions, which is computationally expensive even for fast simulations. Here we try to develop numerical schemes to calibrate various halo and matter statistics in fast low resolution simulations compared to high resolution N-body and hydrodynamic simulations. For the halos, we improve the initial condition resolution and develop a halo finder "relaxed-FoF", where we allow different linking lengths for different halo mass and velocity dispersions. We show that our relaxed-FoF halo finder improves the common statistics, such as halo bias, halo mass function, halo auto power spectrum, cross correlation coefficient with the reference halo catalog, and halo-matter cross power spectrum. We also calibrate small-scale velocities of small halos to improve the power spectrum in redshift space. For the matter statistics, we incorporate the potential gradient descent (PGD) method into fast simulations to improve the matter distribution at nonlinear scales. By building a lightcone output, we show that the PGD method significantly improves the weak lensing convergence tomographic power spectrum. With these improvements FastPM is comparable to the high resolution full N-body simulation of the same mass resolution, with two orders of magnitude fewer time steps. These techniques can be used to improve the halo and matter statistics of FastPM simulations for mock catalogs of future surveys such as DESI and LSST.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-tracer intensity mapping: cross-correlations, line noise & decorrelation

Line intensity mapping (LIM) is a rapidly emerging technique for constraining cosmology and galaxy formation using multi-frequency, low angular resolution maps. Many LIM applications crucially rely on cross-correlations of two line intensity maps, or of intensity maps with galaxy surveys or galaxy/CMB lensing. We present a consistent halo model to predict all these cross-correlations and enable joint analyses, in 3D redshift-space and for 2D projected maps. We extend the conditional luminosity function formalism to the multi-line case, to consistently account for correlated scatter between multiple galaxy line luminosities. This allows us to model the scale-dependent decorrelation between two line intensity maps, a key input for foreground rejection and for approaches that estimate auto-spectra from cross-spectra. This also enables LIM cross-correlations to reveal astrophysical properties of the interstellar medium inacessible with LIM auto-spectra. We expose the different sources of luminosity scatter or "line noise" in LIM, and clarify their effects on the 1-halo and galaxy shot noise terms. In particular, we show that the effective number density of halos can in some cases exceed that of galaxies, counterintuitively. Using observational and simulation input, we implement this halo model for the Hα, [Oiii], Lyman-α, CO and [Cii] lines. Here, we encourage observers and simulators to measure galaxy luminosity correlation coefficients for pairs of lines whenever possible. Our code is publicly available at https://github.com/EmmanuelSchaan/HaloGen/tree/LIM. In a companion paper, we use this halo model formalism and code to highlight the degeneracies between cosmology and astrophysics in LIM, and to compare the LIM observables to galaxy detection for a number of surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Full calibration of the tomographic redshift distribution from the HSC PDR3 Shape Catalog with DESI

The calibration of tomographic redshift distributionsis essential for cosmological analysis of weak lensing data.In this work, we calibrate all four tomographic bins of the Hyper Suprime Camera (HSC) weak lensing catalog with the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 and 2 using the clustering redshifts technique. We include z > 1.2 redshift sources such as emission line galaxies (ELG) and quasars (QSO) sources in our calibration, which were not available in the previous HSC calibration (Rau et al. (2022), Mon. Not. Roy. Astron. Soc. 524 (2023) 5109), allowing a complete calibration of all the redshift bins. We find the first tomographic bin exhibits a small shift towards low redshifts. The second bin is in good agreement with the photometric calibration, while third and fourth bin exhibit a shift towards higher redshifts. However, these shifts are considerably smaller than the shifts obtained in the HSC Year 3 cosmic shear analyses. We evaluate the impact of galaxy bias and magnification effects from all the samples on the measurements, finding them to be small, and we propose corrections to reduce them further. Specifically, we relax the assumption of linear bias and only assume no redshift evolution of the cross-correlation coefficient, allowing us to leverage smaller clustering scales. We model the redshift distributions with splines and compare our results to previous analyses as well as to other parameterizations found in literature. For the two high-redshift tomographic bins, we find the shifts to higher redshifts with respect to the measurements performed in Rau+2022 to be Δz$_{3}$ =-0.039$^{+0.020}$$_{-0.021}$ and Δz$_{4}$ = -0.048$^{+0.012}$$_{-0.012}$.

Choppin de Janvry, J. [LBL, Berkeley; UC, Berkeley↗

Energetic particle-induced geodesic acoustic modes on DIII-D

Various properties of the energetic particle-induced geodesic acoustic mode (EGAM) are explored in this large database analysis of DIII-D experimental data. EGAMs are n = 0 modes with m = 0 electrostatic potential fluctuations (where n/m = toroidal/poloidal mode number), m = 1 density fluctuations, and m = 2 magnetic fluctuations. The fundamental frequency (~20–40 kHz) of the mode is typically below that of the traditional geodesic acoustic mode frequency. EGAMs are most easily destabilized by beams in the counter plasma current (counter-I p ) direction as compared to co-Ip and off-axis beams. During counter beam injection, the mode frequency is found to have the strongest linear dependence (correlation coefficient r = –0.71) with the safety factor (q). Here, the stability of the mode in the space of q and poloidal beta (β p ) shows a clear boundary for the mode stability. The stability of the mode depends more strongly on damping rate than on fast-ion drive for a given injection geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance assessment of PHITS simulations for the inverse-kinematic p( 7 Li,n) 7 Be reaction based on fast-neutron measurements with a diamond detector

The inverse-kinematics p( 7 Li,n) 7 Be reaction produces forward-focused neutron emission, offering enhanced usable flux and reduced shielding requirements. Reliable simulation of such neutron fields is essential for the development of compact accelerator-based neutron sources. In this study, a PHITS-based simulation framework for the reaction was experimentally assessed using fast-neutron measurements. Forward-directed neutrons were measured with a diamond neutron detector and quantitatively compared with simulations with newly prepared IK-Frag cross-section file based on the proton-induced reaction data in ENDF/B-VIII.1, TENDL-2023, and JENDL-4.0/HE. Measurements and simulations were performed for incident 7 Li 3+ energies ranging from 15.0 to 25.0 MeV using a 50 μm-thick polypropylene target. For all conditions, the PHITS-based simulation framework reproduced the deposited energy spectra at the correct order of magnitude. The comparison of deposited energy spectra in the diamond detector showed high correlation coefficients across all investigated energies, indicating reasonable agreement in spectral shape between simulations and measurements. This work represents an initial step toward establishing a benchmark for PHITS simulations of the inverse kinematic reaction between an incident lithium-ion and a proton target.

43 PARTICLE ACCELERATORS↗

MASSCLEANCOLORS-MASS-DEPENDENT INTEGRATED COLORS FOR STELLAR CLUSTERS DERIVED FROM 30 MILLION MONTE CARLO SIMULATIONS

We present Monte Carlo models of open stellar clusters with the purpose of mapping out the behavior of integrated colors with mass and age. Our cluster simulation package allows for stochastic variations in the stellar mass function to evaluate variations in integrated cluster properties. We find that UBVK colors from our simulations are consistent with simple stellar population (SSP) models, provided the cluster mass is large, M {sub cluster} {>=} 10{sup 6} M {sub sun}. Below this mass, our simulations show two significant effects. First, the mean value of the distribution of integrated colors moves away from the SSP predictions and is less red, in the first 10{sup 7} to 10{sup 8} years in UBV colors, and for all ages in (V - K). Second, the 1{sigma} dispersion of observed colors increases significantly with lower cluster mass. We attribute the former to the reduced number of red luminous stars in most of the lower mass clusters and the latter to the increased stochastic effect of a few of these stars on lower mass clusters. This latter point was always assumed to occur, but we now provide the first public code able to quantify this effect. We are completing a more extensive database of magnitudes and colors as a function of stellar cluster age and mass that will allow the determination of the correlation coefficients among different bands, and improve estimates of cluster age and mass from integrated photometry.

79 ASTRONOMY AND ASTROPHYSICS↗

RADIO/GAMMA-RAY TIME DELAY IN THE PARSEC-SCALE CORES OF ACTIVE GALACTIC NUCLEI

We report the detection of a non-zero time delay between radio emission measured by the VLBA at 15.4 GHz and {gamma}-ray radiation ({gamma}-ray leads radio) registered by the Large Area Telescope (LAT) on board the Fermi Gamma-Ray Space Telescope for a sample of 183 radio and {gamma}-ray bright active galactic nuclei. For the correlation analysis, we used 0.1-100 GeV {gamma}-ray photon fluxes, taken from monthly binned measurements from the first Fermi LAT catalog, and 15.4 GHz radio flux densities from the MOJAVE VLBA program. The correlation is most pronounced if the core flux density is used, strongly indicating that the {gamma}-ray emission is generated within the compact region of the 15 GHz VLBA core. Determining the Pearson's r and Kendall's {tau} correlation coefficients for different time lags, we find that for the majority of sources the radio/{gamma}-ray delay ranges from 1 to 8 months in the observer's frame and peaks at approximately 1.2 months in the source's frame. We interpret the primary source of the time delay to be synchrotron opacity in the nuclear region.

79 ASTRONOMY AND ASTROPHYSICS↗

Circumventing data imbalance in magnetic ground state data for magnetic moment predictions

Abstract Magnetic materials play a crucial role in the transition to more sustainable forms of energy and electric vehicles. There is an anticipated shortage in magnetic materials in the future, and as a result there is an urgent need to discover and design new magnetic materials. Computational magnetic material design using density functional theory is daunting because of the challenge in identifying magnetic ground states from a combinatorially large set of possibilities. Machine learning offers a path forward by enabling efficient surrogate models that can more readily enumerate these states, but there is a dearth of training data available, and what is available tends to be imbalanced with too much non-magnetic data. In this work we show that the discrete and previously tackled data imbalance that exists at the level of the magnetic ordering leads to an imbalanced continuous distribution with many zeros when the data is unraveled at the atomic magnetic moment level, which subsequently leads to models with low accuracy for magnetic properties. We mitigate this by using a two-part model framework. Our scheme is able to classify atoms into magnetic and non-magnetic with an F1 score and Matthew’s correlation coefficient (MCC) of ~91% and then to provide an implicit embedding representation that maps directly onto the magnitude of the magnetic moment with a mean absolute error of 0.1 μ B . Beyond screening for new magnetic materials, we demonstrate an additional practical use case of our scheme: the provision of good initial guesses for magnetic moments in first-principles electronic relaxations. Such initialization is shown to lead to faster convergence to configurations that lie closer to the ground state.

Computer Science↗

PRODeepSyn: predicting anticancer synergistic drug combinations by embedding cell lines with protein–protein interaction network

Abstract Although drug combinations in cancer treatment appear to be a promising therapeutic strategy with respect to monotherapy, it is arduous to discover new synergistic drug combinations due to the combinatorial explosion. Deep learning technology holds immense promise for better prediction of in vitro synergistic drug combinations for certain cell lines. In methods applying such technology, omics data are widely adopted to construct cell line features. However, biological network data are rarely considered yet, which is worthy of in-depth study. In this study, we propose a novel deep learning method, termed PRODeepSyn, for predicting anticancer synergistic drug combinations. By leveraging the Graph Convolutional Network, PRODeepSyn integrates the protein–protein interaction (PPI) network with omics data to construct low-dimensional dense embeddings for cell lines. PRODeepSyn then builds a deep neural network with the Batch Normalization mechanism to predict synergy scores using the cell line embeddings and drug features. PRODeepSyn achieves the lowest root mean square error of 15.08 and the highest Pearson correlation coefficient of 0.75, outperforming two deep learning methods and four machine learning methods. On the classification task, PRODeepSyn achieves an area under the receiver operator characteristics curve of 0.90, an area under the precision–recall curve of 0.63 and a Cohen’s Kappa of 0.53. In the ablation study, we find that using the multi-omics data and the integrated PPI network’s information both can improve the prediction results. Additionally, the case study demonstrates the consistency between PRODeepSyn and previous studies.

Wang, Xiaowen↗

The impact of curation errors in the PDBBind Database on machine learning predictions of protein–protein binding affinity

The PDBBind database has been widely utilized for the computational prediction of protein–protein binding affinities. While the accuracy of the PDBBind-curated equilibrium dissociation constants (K D ) has been reported for the protein–ligand subset of the PDBBind database, the curation accuracy has not been reported for the protein–protein subset. Here, we present a detailed manual analysis for the subset of PDBBind records with PubMed Central Open Access primary publications and find that ~19% of these records had K D values that were not supported by their primary publications. The impact of these putative curation errors on the machine learning-based prediction of K D from experimental protein–protein 3D structures was evaluated and correcting the curation errors improved the Pearson correlation coefficient between measured and random forest-predicted log 10 (K D ) values by ~8 percentage points. This finding underscores the importance of dataset accuracy for computational modelling and highlights the need for more stringent curation processes when extracting information from the scientific literature.

59 BASIC BIOLOGICAL SCIENCES↗

A web-based tool for the prediction of rice transcription factor function

Transcription factors (TFs) are an important class of regulatory molecules. Despite their importance, only a small number of genes encoding TFs have been characterized in Oryza sativa (rice), often because gene duplication and functional redundancy complicate their analysis. To address this challenge, we developed a web-based tool called the Rice Transcription Factor Phylogenomics Database (RTFDB) and demonstrate its application for predicting TF function. The RTFDB hosts transcriptome and co-expression analyses. Sources include high-throughput data from oligonucleotide microarray (Affymetrix and Agilent) as well as RNA-Seq-based expression profiles. We used the RTFDB to identify tissue-specific and stress-related gene expression. Subsequently, 273 genes preferentially expressed in specific tissues or organs, 455 genes showing a differential expression pattern in response to 4 abiotic stresses, 179 genes responsive to infection of various pathogens and 512 genes showing differential accumulation in response to various hormone treatments were identified through the meta-expression analysis. Pairwise Pearson correlation coefficient analysis between paralogous genes in a phylogenetic tree was used to assess their expression collinearity and thereby provides a hint on their genetic redundancy. Integrating transcriptome with the gene evolutionary information reveals the possible functional redundancy or dominance played by paralog genes in a highly duplicated genome such as rice. With this method, we estimated a predominant role for 83.3% (65/78) of the TF or transcriptional regulator genes that had been characterized via loss-of-function studies. In this regard, the proposed method is applicable for functional studies of other plant species with annotated genome.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of data collection bias of third molar stages of mineralisation for age estimation in the living

Abstract Age assessment of the living is a fundamental procedure in the process of human identification, in order to guarantee fair treatment of individuals, which has ethical, civil, legal, and medical repercussions. The careful selection of the appropriate methods requires evaluation of several parameters: accuracy, precision of the method, as well as its reproducibility. The approach proposed by Mincer et al. adapted from Demirjian et al. exploring third molar mineralisation, is one of the most frequently considered for age estimation of the living. Thus, this work aims to assess potential bias in the data collection when applying the classification stages for dental mineralisation adapted by Mincer et al. A total of 102 orthopantomographs, of clinical origin, belonging to individuals aged between 12 and 25 years ($ \bar{\textit x} $ = 20.12 years, SD = 3.49 years; 65 females, 37 males, all of Portuguese nationality) were included and a retrospective analysis performed by five observers with different levels of experience (high, average, and basic). The performance and agreement between five observers were evaluated using Weighted Cohen’s Kappa and the Intraclass Correlation Coefficient. To access the influence of impaction on third molar classification, variables were tested using ordinal logistic regression Generalised Linear Model. It was observed that there were variations in the number of teeth identified among the observers, but the agreement levels ranged from moderate to substantial (0.4–0.8). Upon closer examination of the results, it was observed that although there were discernible differences between highly experienced observers and those with less experience, the gap was not as significant as initially hypothesised, and a greater disparity between the classifications of the upper (0.24–0.49) and lower third molars (>0.55) was observed. When bone superimposition is present, the classification process is not significantly influenced; however, variation in teeth angulation affects the assessment. The results suggest that with an efficient preparation, the level of experience as a factor can be overcome. Mincer and colleague's classification system can be replicated with ease and consistency, even though the classification of upper and lower third molars presents distinct challenges.

de Oliveira Santos, Inês (ORCID:0000000267324347)↗