Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Preparation of gallium nitride surfaces for atomic layer deposition of aluminum oxide

A combined wet and dry cleaning process for GaN(0001) has been investigated with XPS and DFT-MD modeling to determine the molecular-level mechanisms for cleaning and the subsequent nucleation of gate oxide atomic layer deposition (ALD). In situ XPS studies show that for the wet sulfur treatment on GaN(0001), sulfur desorbs at room temperature in vacuum prior to gate oxide deposition. Angle resolved depth profiling XPS post-ALD deposition shows that the a-Al{sub 2}O{sub 3} gate oxide bonds directly to the GaN substrate leaving both the gallium surface atoms and the oxide interfacial atoms with XPS chemical shifts consistent with bulk-like charge. These results are in agreement with DFT calculations that predict the oxide/GaN(0001) interface will have bulk-like charges and a low density of band gap states. This passivation is consistent with the oxide restoring the surface gallium atoms to tetrahedral bonding by eliminating the gallium empty dangling bonds on bulk terminated GaN(0001)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconductivity in textured Bi clusters/Bi{sub 2}Te{sub 3} films

We report superconductivity at an onset critical temperature below 3.1 K in topological insulator ∼200-nm-thick Bi{sub 2}Te{sub 3} thin films grown by pulsed laser deposition. Using energy-dispersive X-ray spectroscopy elemental mapping and Auger electron spectroscopy elemental depth profiling, we clearly identified bismuth (Bi) precipitation and Bi cluster signatures. Superconductivity in the Bi{sub 2}Te{sub 3} films was attributed to the proximity effect of Bi clusters precipitated on the surface of the Bi{sub 2}Te{sub 3} films.

36 MATERIALS SCIENCE↗

Nano-scale NiSi and n-type silicon based Schottky barrier diode as a near infra-red detector for room temperature operation

The fabrication of nano-scale NiSi/n-Si Schottky barrier diode by rapid thermal annealing process is reported. The characterization of the nano-scale NiSi film was performed using Micro-Raman Spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The thickness of the film (27 nm) has been measured by cross-sectional Secondary Electron Microscopy and XPS based depth profile method. Current–voltage (I–V) characteristics show an excellent rectification ratio (I{sub ON}/I{sub OFF} = 10⁵) at a bias voltage of ±1 V. The diode ideality factor is 1.28. The barrier height was also determined independently based on I–V (0.62 eV) and high frequency capacitance–voltage technique (0.76 eV), and the correlation between them has explained. The diode photo-response was measured in the range of 1.35–2.5 μm under different reverse bias conditions (0.0–1.0 V). The response is observed to increase with increasing reverse bias. From the photo-responsivity study, the zero bias barrier height was determined to be 0.54 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced passivation techniques for Si solar cells with high-κ dielectric materials

Electronic recombination losses at the wafer surface significantly reduce the efficiency of Si solar cells. Surface passivation using a suitable thin dielectric layer can minimize the recombination losses. Herein, advanced passivation using simple materials (Al{sub 2}O{sub 3}, HfO{sub 2}) and their compounds H{sub (Hf)}A{sub (Al)}O deposited by atomic layer deposition (ALD) was investigated. The chemical composition of Hf and Al oxide films were determined by X-ray photoelectron spectroscopy (XPS). The XPS depth profiles exhibit continuous uniform dense layers. The ALD-Al{sub 2}O{sub 3} film has been found to provide negative fixed charge (−6.4 × 10{sup 11 }cm{sup −2}), whereas HfO{sub 2} film provides positive fixed charge (3.2 × 10{sup 12 }cm{sup −2}). The effective lifetimes can be improved after oxygen gas annealing for 1 min. I-V characteristics of Si solar cells with high-κ dielectric materials as passivation layers indicate that the performance is significantly improved, and ALD-HfO{sub 2} film would provide better passivation properties than that of the ALD-Al{sub 2}O{sub 3} film in this research work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, compositional, and photoluminescence characterization of thermal chemical vapor deposition-grown Zn₃N₂ microtips

The catalytic growth of Zn₃N₂ using guided-stream thermal chemical vapor deposition has been investigated within the parameter range of acicular growth to obtain uniform microtips with a high crystalline quality. The cubic anti-bixbyite crystal structure of Zn₃N₂ microtips and its related phonon mode are revealed by X-ray diffraction and Raman spectroscopy, respectively. The surface morphologies of pure and surface-oxidized Zn₃N₂ microtips are depicted by scanning electron microscopy and show the crack formation on the surface-oxidized Zn₃N₂ microtips. The spatial element distribution map confirms the VLS growth mechanism for Zn₃N₂ microtips and reveals the depth profile of zinc, nitrogen, oxygen, and nickel elements. Photoluminescence (PL) spectra of Zn₃N₂ microtips show a sharp infrared band-to-band emission peak at 1.34 eV with a full width at half maximum of ~100 meV and a very broad oxygen-related defect band emission peak centered at ~0.85 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the influence of coadsorbent dye upon the interfacial structure of dye-sensitized solar cells

The interface between Ru(tcterpy)(NCS){sub 3}TBA{sub 2} [black dye (BD); tcterpy = 4,4{sup ′},4{sup ″}-tricarboxy-2,2{sup ′}:6{sup ′},2{sup ″}-terpyridine, NCS = thiocyanato, TBA = tetrabutylammonium cation] and nanocrystalline TiO{sub 2}, as found in dye-sensitized solar cells, is investigated by soft-X-ray synchrotron radiation and compared with the adsorption structure of cis-Ru(Hdcbpy){sub 2}(NCS){sub 2}TBA{sub 2} (N719; dcbpy = 4,4{sup ′}-dicarboxy-2,2{sup ′}-bipyridine) on TiO{sub 2} to elucidate the relationship between the adsorption mode of BD and the photocurrent with and without coadsorbed indoline dye D131. The depth profile is characterized with X-ray photoelectron spectroscopy and S K-edge X-ray absorption fine structure using synchrotron radiation. Both datasets indicate that one of the isothiocyanate groups of BD interacts with TiO{sub 2} via its S atom when the dye is adsorbed from a single-component solution. In contrast, the interaction is slightly suppressed when D131 is coadsorbed, indicated by the fact that the presence of D131 changes the adsorption mode of BD. Based upon these results, the number of BD dye molecules interacting with the substrate is shown to decrease by 10% when D131 is coadsorbed, and the dissociation is shown to be related to the short-circuit photocurrent in the 600–800 nm region. The design of a procedure to promote the preferential adsorption of D131 therefore leads to an improvement of the short-circuit current and conversion efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coexistence of colossal stress and texture gradients in sputter deposited nanocrystalline ultra-thin metal films

This paper demonstrates experimentally that ultra-thin, nanocrystalline films can exhibit coexisting colossal stress and texture depth gradients. Their quantitative determination is possible by X-ray diffraction experiments. Whereas a uniform texture by itself is known to generally cause curvature in so-called sin{sup 2}ψ plots, it is shown that the combined action of texture and stress gradients provides a separate source of curvature in sin{sup 2}ψ plots (i.e., even in cases where a uniform texture does not induce such curvature). On this basis, the texture and stress depth profiles of a nanocrystalline, ultra-thin (50 nm) tungsten film could be determined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear effects in defect production by atomic and molecular ion implantation

This report deals with studies concerning vacancy related defects created in silicon due to implantation of 200 keV per atom aluminium and its molecular ions up to a plurality of 4. The depth profiles of vacancy defects in samples in their as implanted condition are carried out by Doppler broadening spectroscopy using low energy positron beams. In contrast to studies in the literature reporting a progressive increase in damage with plurality, implantation of aluminium atomic and molecular ions up to Al{sub 3}, resulted in production of similar concentration of vacancy defects. However, a drastic increase in vacancy defects is observed due to Al{sub 4} implantation. The observed behavioural trend with respect to plurality has even translated to the number of vacancies locked in vacancy clusters, as determined through gold labelling experiments. The impact of aluminium atomic and molecular ions simulated using MD showed a monotonic increase in production of vacancy defects for cluster sizes up to 4. The trend in damage production with plurality has been explained on the basis of a defect evolution scheme in which for medium defect concentrations, there is a saturation of the as-implanted damage and an increase for higher defect concentrations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spontaneous formation of superconducting NiBi{sub 3} phase in Ni-Bi bilayer films

We report the spontaneous formation of superconducting NiBi{sub 3} phase in thermally evaporated Ni-Bi bilayer films. High reaction-diffusion coefficient of Bi is believed to drive the formation of NiBi{sub 3} during the deposition of Bi on the Ni film. Cross sectional transmission electron microscopy and glancing incidence X-ray depth profiling confirmed the presence of NiBi{sub 3} throughout the top Bi layer. Superconducting transition at ∼3.9 K, close to the bulk value, was confirmed by transport and magnetization measurements. The bilayers were irradiated with varying fluence of 100 MeV Au ions to study the robustness of superconducting order in presence of large concentration of defects. Superconducting parameters of NiBi{sub 3}, such as transition temperature and upper critical field, remained unchanged upto an ion dose of 1 × 10{sup 14} ions/cm{sup 2}. The diffusive formation of NiBi{sub 3} in Ni opens the possibility of studying superconducting proximity effect at a truly clean superconductor-ferromagnet interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer deposition effect on the electrical properties of Al{sub 2}O{sub 3}-passivated PbS quantum dot field-effect transistors

We have investigated the effect of atomic layer deposition (ALD) on the electrical properties of colloidal PbS quantum dot field-effect transistors (PbS QD-FETs). Low-temperature Al{sub 2}O{sub 3} ALD process was used to fill up the pore spaces of PbS QD films containing 1, 2-ethanedithiol ligands. Upon deposition of Al{sub 2}O{sub 3} on PbS film, the PbS QD-FETs showed ambipolar behavior. The treated film retained this property for over 2 months, despite of exposure to air. This change in the electrical properties of the PbS QD-FETs is attributed to the formation of electron channels in the Al{sub 2}O{sub 3}-passivated PbS film. We conclude that these electron transport channels in the Al{sub x}O{sub y}-PbS film are formed due to substitution of the Pb sites by Al metal and chemical reduction of Pb{sup 2+} ions, as determined by an analysis of the depth profile of the film using secondary ion mass spectrometry and X-ray photoelectron spectroscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of silver photodiffusion in Ge{sub 8}Sb{sub 2}Te{sub 11} thin films

Silver-doped amorphous Ge{sub 8}Sb{sub 2}Te{sub 11} thin films have been prepared by photodiffusion at room-temperature; the Ge{sub 8}Sb{sub 2}Te{sub 11}/Ag bilayer was deposited by vacuum thermal evaporation. Photodiffusion of Ag into the amorphous Ge{sub 8}Sb{sub 2}Te{sub 11} thin films has been carried out by illuminating the prepared Ge{sub 8}Sb{sub 2}Te{sub 11}/Ag bilayer with halogen lamp. The photodiffused silver depth profile was traced by means of time of flight secondary ion mass spectroscopy. The film remains amorphous after Ag photodiffusion. The crystallization temperature of the films was evaluated by temperature dependent sheet resistance measurement. The amorphous nature and crystalline phases of the films have been identified by using X-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amorphorized tantalum-nickel binary films for metal gate applications

Amorphous metal gates have the potential to eliminate the work function variation due to grain orientation for poly-crystalline metal gate materials, which is a leading contributor to threshold voltage variation for small transistors. Structural and electrical properties of TaNi alloys using co-sputtering with different compositions and multilayer structures with different thicknesses are investigated in this work. It is found that TaNi films are amorphous for a wide range of compositions as deposited, and the films stay amorphous after annealing at 400 °C in RTA for 1 min and up to at least 700 °C depending on the composition. The amorphous films eventually crystallize into Ni, Ta, and TaNi{sub 3} phases at high enough temperature. For multilayer Ta/Ni structures, samples with individual layer thickness of 0.12 nm and 1.2 nm are amorphous as deposited due to intermixing during deposition, and stay amorphous until annealed at 500 °C. The resistivity of the films as-deposited are around 200 μΩ·cm. The work function of the alloy is fixed at close to the Ta work function of 4.6 eV for a wide range of compositions. This is attributed to the segregation of Ta at the metal-oxide interface, which is confirmed by XPS depth profile. Overall, the excellent thermal stability and low resistivity makes this alloy system a promising candidate for eliminating work function variation for gate last applications, as compared to crystalline Ta or TiN gates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Concentration-dependent self-diffusion coefficients in amorphous Si{sub 1−x}Ge{sub x} solid solutions: An interdiffusion study

Self-diffusion coefficients of Si and Ge in amorphous Si{sub 1−x}Ge{sub x} (a-Si{sub 1−x}Ge{sub x}) solid solutions were determined quantitatively in the temperature range of 440 °C – 460 °C by the investigation of interdiffusion in amorphous Si/Si{sub 0.52}Ge{sub 0.48} multilayers using Auger electron spectroscopy sputter-depth profiling. The determined concentration dependent self-diffusion coefficients of Si and Ge in a-Si{sub 1−x}Ge{sub x} with 0 ≤ x ≤ 0.48 at. % Ge are about ten orders of magnitude larger than in the corresponding crystalline phases, due to the inherent, excess free volume in the amorphous phase. The self-diffusion coefficient of Si (or Ge) in a-Si{sub 1−x}Ge{sub x} increases in association with a decreasing activation enthalpy with increasing Ge concentration. This concentration dependence has been related to an overall decrease of the average bond strength with increasing Ge concentration.

36 MATERIALS SCIENCE↗

Indium and gallium diffusion through zirconia in the TiN/ZrO{sub 2}/InGaAs stack

Angle-resolved X-ray Photoelectron Spectroscopy (ARXPS) was applied to the TiN/ZrO{sub 2}/InGaAs stack to assess its thermal stability. Through a robust ARXPS analysis, it was possible to observe subtle effects such as the thermally induced diffusion of substrate atomic species (In and Ga) through the dielectric layer. The detailed characterization of the film structure allowed for assessing the depth profiles of the diffused atomic species by means of the scenarios-method. Since the quantification for the amount of diffused material was done at different temperatures, it was possible to obtain an approximate value of the activation energy for the diffusion of indium through zirconia. The result is very similar to the previously reported values for indium diffusion through alumina and through hafnia.

36 MATERIALS SCIENCE↗

Excitation mechanisms in 1 mJ picosecond laser induced low pressure He plasma and the resulting spectral quality enhancement

We report in this paper the results of an experimental study on the spectral and dynamical characteristics of plasma emission induced by 1 mJ picoseconds (ps) Nd-YAG laser using spatially resolved imaging and time resolved measurement of the emission intensities of copper sample. This study has provided the experimental evidence concerning the dynamical characteristics of the excitation mechanisms in various stages of the plasma formation, which largely consolidate the basic scenarios of excitation processes commonly accepted so far. However, it is also clearly shown that the duration of the shock wave excitation process induced by ps laser pulses is much shorter than those observed in laser induced breakdown spectroscopy employing nanosecond laser at higher output energy. This allows the detection of atomic emission due exclusively to He assisted excitation in low pressure He plasma by proper gating of the detection time. Furthermore, the triplet excited state associated with He I 587.6 nm is shown to be the one most likely involved in the process responsible for the excellent spectral quality as evidenced by its application to spectrochemical analysis of a number of samples. The use of very low energy laser pulses also leads to minimal destructive effect marked by the resulted craters of merely about 10 μm diameter and only 10 nm deep. It is especially noteworthy that the excellent emission spectrum of deuterium detected from D-doped titanium sample is free of spectral interference from the undesirable ubiquitous water molecules without a precleaning procedure as applied previously and yielding an impressive detection limit of less than 10 μg/g. Finally, the result of this study also shows a promising application to depth profiling of impurity distribution in the sample investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct observation of conductive filament formation in Alq3 based organic resistive memories

This work explores resistive switching mechanisms in non-volatile organic memory devices based on tris(8-hydroxyquinolie)aluminum (Alq{sub 3}). Advanced characterization tools are applied to investigate metal diffusion in ITO/Alq{sub 3}/Ag memory device stacks leading to conductive filament formation. The morphology of Alq{sub 3}/Ag layers as a function of the metal evaporation conditions is studied by X-ray reflectivity, while depth profile analysis with X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry is applied to characterize operational memory elements displaying reliable bistable current-voltage characteristics. 3D images of the distribution of silver inside the organic layer clearly point towards the existence of conductive filaments and allow for the identification of the initial filament formation and inactivation mechanisms during switching of the device. Initial filament formation is suggested to be driven by field assisted diffusion of silver from abundant structures formed during the top electrode evaporation, whereas thermochemical effects lead to local filament inactivation.

36 MATERIALS SCIENCE↗

Superconducting properties and chemical composition of NbTiN thin films with different thickness

In this research, we systematically investigated the superconducting properties and chemical composition of NbTiN thin films prepared on single-crystal MgO substrates. The NbTiN thin films with different thicknesses (4–100 nm) were deposited by reactive DC magnetron sputtering at ambient temperature. We measured and analyzed the crystal structure and thickness dependence of the chemical composition using X-ray diffraction and X-ray photoelectron spectroscopy depth profiles. The films exhibited excellent superconducting properties, with a high superconducting critical temperature of 10.1 K, low resistivity (ρ{sub 20} = 93 μΩ cm), and residual resistivity ratio of 1.12 achieved for 4-nm-thick ultrathin NbTiN films prepared at the deposition current of 2.4 A. The stoichiometry and electrical properties of the films varied gradually between the initial and upper layers. A minimum ρ{sub 20} of 78 μΩ cm and a maximum residual resistivity ratio of 1.15 were observed for 12-nm-thick films, which significantly differ from the properties of NbN films with the same NaCl structure.

36 MATERIALS SCIENCE↗