Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse interface method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

The inviscid incompressible limit of Kelvin–Helmholtz instability for plasmas

The Kelvin–Helmholtz Instability (KHI) is an interface instability that develops between two fluids or plasmas flowing with a common shear layer. KHI occurs in astrophysical jets, solar atmosphere, solar flows, cometary tails, planetary magnetospheres. Two applications of interest, encompassing both space and fusion applications, drive this study: KHI formation at the outer flanks of the Earth’s magnetosphere and KHI growth from non-uniform laser heating in magnetized direct-drive implosion experiments. Here, we study 2D KHI with or without a magnetic field parallel to the flow. We use both the GAMERA code, which solves the compressible Euler equations, and the STRATOSPEC code, which solves the Navier-Stokes equations under the Boussinesq approximation, coupled with the magnetic field dynamics. GAMERA is a global three-dimensional MHD code with high-order reconstruction in arbitrary nonorthogonal curvilinear coordinates, which is developed for a large range of astrophysical applications. STRATOSPEC is a three-dimensional pseudo-spectral code with an accuracy of infinite order (no numerical diffusion). Magnetized KHI is a canonical case for benchmarking hydrocode simulations with extended MHD options. An objective is to assess whether or not, and under which conditions, the incompressibility hypothesis allows to describe a dynamic compressible system. For comparing both codes, we reach the inviscid incompressible regime, by decreasing the Mach number in GAMERA, and viscosity and diffusion in STRATOSPEC. Here, we specifically investigate both single-mode and multi-mode initial perturbations, either with or without magnetic field parallel to the flow. The method relies on comparisons of the density fields, 1D profiles of physical quantities averaged along the flow direction, and scale-by-scale spectral densities. We also address the triggering, formation and damping of filamentary structures under varying Mach number or Atwood number, with or without a parallel magnetic field. Comparisons show very satisfactory results between the two codes. The vortices dynamics is well reproduced, along with the breaking or damping of small-scale structures. We end with the extraction of growth rates of magnetized KHI from the compressible regime to the incompressible limit in the linear regime assessing the effects of compressibility under increasing magnetic field. The observed differences between the two codes are explained either from diffusion or non-Boussinesq effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

From Coating to Dopant: How the Transition Metal Composition Affects Alumina Coatings on Ni-Rich Cathodes

Surface alumina coatings have been shown to be an effective way to improve the stability and cyclability of cathode materials. However, a detailed understanding of the relationship between the surface coatings and the bulk layered oxides is needed to better define the critical cathode–electrolyte interface. In this work, we systematically studied the effect of the composition of Ni-rich LiNi x Mn y Co 1–x–y O 2 (NMC) on the surface alumina coatings. Changing cathode composition from LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) to LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) was found to facilitate the diffusion of surface alumina into the bulk after high-temperature annealing. By use of a variety of spectroscopic techniques, Al was seen to have a high bulk compatibility with higher Ni/Co content, and low bulk compatibility was associated with Mn in the transition metal layer. It was also noted that the cathode composition affected the observed morphology and surface chemistry of the coated material, which has an effect on electrochemical cycling. The presence of a high surface Li concentration and strong alumina diffusion into the bulk led to a smoother surface coating on NMC811 with no excess alumina aggregated on the surface. Structural characterization of pristine NMC particles also suggests surface Co segregation, which may act to mediate the diffusion of the Al from the surface to the bulk. The diffusion of Al into the bulk was found to be detrimental to the protection function of surface coatings leading to poor overall cyclability, indicating the importance of compatibility between surface coatings and bulk oxides on the electrochemical performance of coated cathode materials.In conclusion, these results are important in developing a better coating method for synthesis of next-generation cathode materials for lithium-ion batteries.

36 MATERIALS SCIENCE↗

Novel and effective surface passivation for high efficiency n- and p-type Silicon solar cell

The project objective was to develop a novel Si surface passivation method using chalcogens, sulfur (S) and/or selenium (Se), as passivating elements, to withstand industry-standard high temperature contacting and metallization schemes for p-type Si based passivated emitter and rear contact (p-PERC) solar cells. The back surface passivation of PERC cells has been improved drastically with the invention and successful application of an Al 2 O 3 passivation layer. However, the front n + diffused junction surface is still poorly passivated by the standard amorphous silicon nitride (SiNx) anti-reflection coating (ARC) layer. This project sought to address the passivation challenges of both front n+ emitter and undiffused p-Si back surface. Improved p-PERC solar cell performance with open circuit voltage (V OC ) > 680 mV and efficiency of 22% were targeted to validate superior defect passivation properties as compared to standard SiO 2 / Al 2 O 3 passivation. During this project, we systematically investigated process-structure-properties-performance relationships of this novel advanced defect passivation approach. The S/Se passivation was carried out by reacting industrial Czochralski (Cz) Si wafers in H 2 S and H 2 Se gases in a chemical vapor deposition (CVD) reactor at temperatures up to 700°C. After an exhaustive optimization of the process parameters (temperature, time, and gas concentration), we established an optimized process and demonstrated extremely low surface recombination velocities (SRVs) of 1.5 cm/s and 8 cm/s on n-type and p-type Si, respectively, by S-passivation. In-depth surface and interface characterization were performed using soft x-ray and photoelectron spectroscopies (XPS, UPS, XES), combined with capacitance-voltage-frequency (C-V-f) measurements, to decipher the surface chemical/electronic structure and interface defect state densities. These measurements provided critical understanding of the defect passivation mechanism and elucidated the presence of surface S-Si bonds, a reduction of surface dipoles, and low interface state densities (D it ) < 10 11 cm -2 ev -1 . We also found that the Se-passivation is inferior to the S-passivation (by at least one order of magnitude in SRV). Application of the optimized S-passivation to the n+ diffused emitter surface led to a low surface recombination current density, J0 ≈ 40 fA/cm 2 (~ 1/4 of the industry-standard SiNx-passivation), and high implied V OC (686 mV) in p-PERC solar cell structures. The S-passivation process also was found to improve the bulk quality of the p-type Si, better than the SiO 2 or Al 2 O 3 passivation processes. After successful demonstration of efficient passivation of Si surface defects by S, we extensively studied the air, thermal, and illumination stability of the passivation structure. S-passivation itself degrades in air due to competing reactions with moisture and oxygen to form oxides, which can be eliminated by a SiNx capping layer (also acting as a anti-reflective coating). After SiNx process optimization, we demonstrated illumination and thermally stable S-passivation with SRV < 5 cm/s and J 0 < 80 fA/cm 2 . These enhancements in Si passivation, incorporated into p-PERC cells, achieved an efficiency of 19.93% with V OC = 649 mV, using manufacturing metallization and contacting schemes. The low cell performance (cell V OC is much less than the implied V OC = 686 mV, anticipated from surface passivation) was identified due to degradation of S-passivation during the metal firing step (out-diffusion of S from the Si interface to the SiNx surface). The S-passivation of Si surfaces shows significant promise with excellent passivation quality, essential for high performance (high V OC , high efficiency) solar cells. Integration of this innovative defect passivation into devices, however, demands further development of the capping layer, low temperature (<700°C) metallization process, and/or engineering of advanced device structures. Surface passivation-dominated advanced Si solar cells, such as tunnel oxide passivated contacts and Si heterojunctions, are increasingly of interest due to their high-performance potential and will have a growing photovoltaic market share in the near future.

14 SOLAR ENERGY↗

Mesoscopic modeling of transport resistances in a polymer-electrolyte fuel-cell catalyst layer: Analysis of hydrogen limiting currents

Understanding transport resistances in a polymer-electrolyte fuel cell (PEFC) catalyst layer (CL) is essential to mitigate the unexpected voltage loss when using low loadings of precious metals. In this paper, we explore through mesoscopic modeling the quantification analyses of the transport resistances in CL as derived using hydrogen-pump limiting current. Numerical treatments on the conjugated interfacial conditions at interfaces of ionomer/pore and Pt/ionomer are proposed to describe the mesoscopic transport processes of hydrogen and proton. Characterizations of the reconstructed microstructure of CL are performed. Parameter analyses on the influences of the critical transport properties such as the permeation coefficient and the dissolution and adsorption reaction rates at the surfaces of ionomer/pore and Pt/ionomer on the local transport resistance are presented. It is found that the local transport resistance is mainly originated from the diffusion resistance of the ionomer thin-film, which is more resistive than its bulk analogue with its permeation coefficient fitted to be 5.9% of the bulk one. The interfacial transport resistances and the diffusion resistance are coupled. The local transport resistance increases with I/C ratio due to thicker ionomer coated on the particles. Higher Pt/C ratio and bare carbon fraction lead to higher local transport resistance since the ionomer loading relative to Pt roughness factor decreases. The local transport resistance decreases with the porosity. Furthermore, the contribution of pores to the CL resistance, which decreases with the porosity, is comparatively small at low loadings.

25 ENERGY STORAGE↗

Weak scaling of the contact distance between two fluctuating interfaces with system size

A pair of flat parallel surfaces, each freely diffusing along the direction of their separation, will eventually come into contact. If the shapes of these surfaces also fluctuate, then contact will occur when their centers-of-mass remain separated by a nonzero distance ℓ. An example of such a situation is the motion of interfaces between two phases at conditions of thermodynamic coexistence, and in particular the annihilation of domain wall pairs under periodic boundary conditions. Here we present a general approach to calculate the probability distribution of the contact distance ℓ and determine how its most likely value ℓ* depends on the surfaces' lateral size L. Using the Edward-Wilkinson equation as a model for interfaces, we demonstrate that ℓ* scales weakly with system size, i.e., the dependence of ℓ* on L for both (1+1)- and (2+1)-dimensional interfaces is such that lim L→∞ (ℓ*/L) = 0. In particular, for (2+1)-dimensional interfaces ℓ* is an algebraic function of logL, a result that is confirmed by computer simulations of slab-shaped domains formed under periodic boundary conditions. Overall, this weak scaling implies that such domains remain topologically intact until ℓ becomes very small compared to the lateral size of the interface, contradicting expectations from equilibrium thermodynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adsorption kinetics dictate monolayer self-assembly for both lipid-in and lipid-out approaches to droplet interface bilayer formation

The droplet interface bilayer (DIB) is a method to assemble planar lipid bilayer membranes between lipid-coated aqueous droplets and has gained popularity among researchers in many fields. Well-packed lipid monolayer on aqueous droplet–oil interfaces is a prerequisite for successfully assembling DIBs. Such monolayers can be achieved by two different techniques: “lipid-in”, in which phospholipids in the form of liposomes are placed in water, and “lipid-out”, in which phospholipids are placed in oil as inverse micelles. While both approaches are capable of monolayer assembly needed for bilayer formation, droplet pairs assembled with these two techniques require significantly different incubation periods and exhibit different success rates for bilayer formation. In our study, we combine experimental interfacial tension measurements with molecular dynamics simulations of phospholipids (DPhPC and DOPC) assembled from water and oil origins to understand the differences in kinetics of monolayer formation. With the results from simulations and by using a simplified model to analyze dynamic interfacial tensions, we conclude that, at high lipid concentrations common to DIBs, monolayer formation is simple adsorption controlled for lipid-in technique, whereas it is predominantly adsorption-barrier controlled for the lipid-out technique due to the interaction of interface-bound lipids with lipid structures in the subsurface. The adsorption barrier established in lipid-out technique leads to a prolonged incubation time and lower bilayer formation success rate, proving a good correlation between interfacial tension measurements and bilayer formation. Also, we clarify that advective flow expedites monolayer formation and improves bilayer formation success rate by disrupting lipid structures, rather than enhancing diffusion, in the subsurface and at the interface for lipid-out technique. Additionally, electrical properties of DIBs formed with varying lipid placement and type are characterized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MEUMAPPS (C++ Version)

Many materials, metal alloys in particular, have features on the on micrometer or nanometer scale that have a large impact on the properties of the material. These features are known as the microstructure of the material. Understanding why and how the microstructure forms in a material is of fundamental scientific interest as well as of significant technological interest. The capability to predict microstructure evolution in a material allows the intentional design of microstructures and hence the intentional design of material properties. The phase-field method is one of the leading methods for predicting microstructure evolution. One of the most significant problems for phase-field models is their computational expense. Even limited phase-field simulations can easily require thousands of CPU core-hours to complete, which significantly limits their use. This code provides both a general framework for creating scalable, GPU-accelerated phase-field model applications as well as several applications themselves. The code is capable of using hundreds of GPUs efficiently, which greatly reduces the time required to perform simulations. The code is written with an emphasis on performance portability, that is the ability for the code to run efficiently on a number of different computing architectures without modification of the source code. The performance portability of this code is primarily enabled through the use of two libraries, Kokkos (performance portable data structures and execution patterns) and heFFTe (performance portable distributed 3D fast Fourier transforms). The code consists of a core library, applications, and tests. The core library includes shared functionality between applications. This includes interfaces with fast Fourier transform (FFT) libraries such as heFFTe, data structures based on Kokkos, file input and output capabilities, and a solver for infinitesimal strain mechanical equilibrium problems. Five applications are included in the code. The flagship application is the MEUMAPPS-SS application, which implements the Kim-Kim-Suzuki phase-field model for precipitation for an arbitrary number of phases and components in a metal alloy. Five simpler applications are also included that solve the Eshelby inclusion problem, Allen-Cahn equation, the coupled Allen-Cahn and diffusion equations, and the Cahn-Hilliard equation. The code includes two applications to solve the Cahn-Hilliard equation, one with constant-step-size first-order time integration and the second with adaptive high-order time integration.

DeWitt, Stephen [Oak Ridge National Lab. (ORNL), O↗

Multi-technique characterization of spray coated and roll-to-roll coated gas diffusion fuel cell electrodes

Here this work reports the characterization of catalyst layer (CL) structure and composition for a set of gas-diffusion electrodes (GDEs) fabricated by different coating methods with the goal of developing a better understanding of CL processing-structure-property-performance relationships. The CL coating techniques used in this study were ultrasonic spray coating, and two roll-to-roll (R2R) methods - gravure and slot die. Scanning transmission electron microscopy (STEM) coupled with X-ray energy dispersive spectroscopy (EDS) analysis of GDE cross-sections provided bulk information, while scanning electron microscopy (SEM) with EDS and X-ray photoelectron spectroscopy (XPS) were used to investigate the near surface and surface composition of the CLs that will be in direct contact with the membrane once the membrane electrode assembly (MEA) is constructed. This study demonstrates that common quantification parameters, namely the F:Pt ratio extracted from cross-sectional STEM-EDS maps and top-down CL measurements with SEM and XPS, along with roughness parameters quantified from SEM micrographs are useful parameters in explaining and potentially predicting performance trends. Additionally, it highlights the importance of understanding key CL surface properties for advancing the manufacturability of high-performance components for polymer electrolyte membrane (PEM) technologies.

30 DIRECT ENERGY CONVERSION↗

Extending the range of validity of Fourier's law into the kinetic transport regime via asymptotic solution of the phonon Boltzmann transport equation

We derive the continuum equations and boundary conditions governing phonon-mediated heat transfer in the limit of a small but finite mean-free path from the asymptotic solution of the linearized Boltzmann equation in the relaxation time approximation. Our method uses the ratio of the mean-free path to the characteristic system length scale, also known as the Knudsen number, as the expansion parameter to study the effects of boundaries on the breakdown of the Fourier description. We show that, in the bulk, the traditional heat conduction equation using Fourier's law as a constitutive relation is valid at least up to second order in the Knudsen number for steady problems and first order for time-dependent problems. Yet, this description does not hold within distances on the order of a few mean-free paths from the boundary; this breakdown is a result of kinetic effects that are always present in the boundary vicinity and require solution of a Boltzmann boundary layer problem to be determined. Matching the inner, boundary layer solution to the outer, bulk solution yields boundary conditions for the Fourier description as well as additive corrections in the form of universal kinetic boundary layers; both are found to be proportional to the bulk-solution gradients at the boundary and parametrized by the material model and the phonon-boundary interaction model (Boltzmann boundary condition). Our derivation shows that the traditional no-jump boundary condition for prescribed temperature boundaries and the no-flux boundary condition for diffusely reflecting boundaries are appropriate only to zeroth order in the Knudsen number; at higher order, boundary conditions are of the jump type. We illustrate the utility of the asymptotic solution procedure by demonstrating that it can be used to predict the Kapitza resistance (and temperature jump) associated with an interface between two materials. All results are validated via comparisons with low-variance deviational Monte Carlo simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Immiscible phase incorporation during directional solidification of hypermonotectics

Solidification processes in immiscible samples were investigated by directly observing the events taking place at the solid-liquid interface during directional solidification. Visualization of these events was made possible through the use of a transparent metal analog system and a temperature gradient stage assembly fitted to an optical microscope. The immiscible transparent analog system utilized was the succinonitrile-glycerol system. This system has been shown to exhibit the same morphological transitions as observed in metallic alloys of monotectic composition. Both monotectic and hypermonotectic composition samples were directionally solidified in order to gain an improved understanding of the manner in which the excess hypermonotectic liquid is incorporated into the solidifying structure. The processing conditions utilized prevented sedimentation of the excess hypermonotectic liquid by directionally solidifying the samples in very thin (13 microns), horizontally oriented cells. High thermal gradient to growth rate ratios (G/R) were used in an effort to prevent constitutional supercooling and the subsequent formation of L(sub 2) droplets in advance of the solidification front during the growth of fibrous composite structures. Results demonstrated that hypermonotectic composites could be produced in samples up to two weight percent off of the monotectic composition by using a G/R ratio greater than or equal to 4.6 x 10(exp 4) C(s)/mm(sup 2) to avoid constitutional supercooling. For hypermonotectic samples processed with G/R ratios below 4.6 x 10(exp 4) C(s)/mm(sup 2), constitutional supercooling occurred and resulted in slight interfacial instability. For these samples, two methods of incorporation of the hypermonotectic liquid were observed and are reported. The correlation between the phase spacing, lambda, and the growth rate, R, was examined and was found to obey a relationship generally associated with a diffusion controlled coupled growth process. For samples with compositions ranging from the monotectic composition up to 2 percent off of the monotectic composition, data indicated that the square of the phase spacing (lambda) varied linearly with the inverse of the growth rate (R).

Andrews, J. Barry↗

Cooling rate and dendrite spacing control in direct metal deposition printed Cu-Fe alloys

Over the last several decades, additive manufacturing (AM) has been primarily used for rapid prototyping or to create novel geometries that would be difficult or impossible to create by normal manufacturing methods. More recently, research has been focused on expanding the list of materials that can be made through additive manufacturing, opening a greater range of material properties for this manufacturing method. Due to the unusual conditions during AM, including the high cooling rates and voxel by voxel method of production, AM parts often have anisotropic material microstructures and properties. In this investigation, the laser power, composition, and nozzle head speed during direct metal deposition of copper-iron alloys was varied to understand how the grain structure within the printed parts could be changed and controlled. The resulting dendrite spacing was measured and compared to calculated cooling rates from Gaussian beams on flat plates under similar material and laser properties, which resulted in a cooling rate to dendrite spacing relationship following an inverse square root, as is found in other dendritic systems [Young and Kerkwood, Metall. Trans. A 6, 197–205 (1975)]. Thus, it is demonstrated that in the Cu-Fe system, dendrite spacing can be controlled through manipulation of printing parameters.

36 MATERIALS SCIENCE↗

Application of the Mixed-Mode Model for Numerical Simulation of Pearlitic Transformation

The multiscale model of pearlitic transformation, including the finite element solution of the second Fick’s equation with moving boundary in the microscale and Fourier equation in the macroscale, is presented in this paper. According to the mixed-mode approach, both the volume diffusion and the interface mobility were considered. Model describes sidewise and frontal growth of cementite and ferrite plates in a single grain of the austenite. Assessment of the possibility of the developed model application to determine the key parameters in terms of strength properties of pearlitic steel, i.e., pearlite grain size and colony size as well as interlamellar spacing for various cooling conditions, was the main aim of this work. The model was validated and verified on the basis of experimental tests performed for two eutectoid steels. In practice, developed model can support design process for a technology of high-strength rods and long products manufacturing. Rails were selected as a case study in this work, and therefore, numerical simulations of accelerated cooling of the rail head were performed and the relationship between the parameters of heat treatment, parameters of the structure and properties of the finished product was determined on the basis of obtained results.

36 MATERIALS SCIENCE↗

Applications of Nickelate perovskites for neuromorphic computing from electronic structure and Machine Learning

While the limit of Moore's law is presently being reached with current microelectronic technologies, we need to develop new paradigms that overcome this limitation. In that respect, neuromorphic computing is a concept that emulates the neural behavior and response of the human brain, and it has been recognized as a promising alternative approach. In this research project, we will perform multi-fidelity scale bridging to explore the potential use of materials with metal to insulator transition for neuromorphic applications. In particular, rare earth nickelates are promising for such purposes, as the transition in these materials is quite sensitive to a broad set of different external stimuli. Our multi-fidelity approach will bridge the high-fidelity electronic structure calculations with classical potentials. We will bridge dynamical mean field theory with a classical atomistic representation via a deep learning force field. The neural network is trained with energies, charges, and forces obtained by accurate electronic structure theories based on Dynamical Mean Field Theory. The configurational space is generated from known crystal phases, ab initio molecular dynamics with exchange-correlation functionals corrected with the Hubbard model, disordered phases with different concentrations of oxygen vacancies, and nonsymmetrical positions and induced strain by grain interfaces or contact with a substrate. Strategies to train the model with a reduced number of training examples are obtained from active learning methods, and new structures for improving the learning process are generated by using machine learning autoencoders. This classical potential will be validated through a diversity of electronic structure methods and represents an important step to combine the flexibility and accuracy of first-principles with the speed of classical potentials. The generated multi-fidelity surrogate model will be used to understand the role of strain, oxygen vacancies, proton doping, the variation of the crystal phase, substrate effects, vibrational effects as the octahedral rotation, grain boundaries and defect effects on the response of a Metal to Insulator Transition (MIT) in correlated materials. Long time and large-scale simulations will help understand the role of different stimuli to control the hysteresis of the MIT, as it has been experimentally suggested. Selected configurations will be analyzed with higher-level theories to provide an accurate electronic description and to study how the orbitals and charges are rearranged under different conditions.

36 MATERIALS SCIENCE↗

Room temperature neutron diffraction and magnetic studies of multiferroic Pb{sub 0.9}Bi{sub 0.1}Fe{sub 0.55}Nb{sub 0.45}O{sub 3} solid solution

The Pb{sub 0.9}Bi{sub 0.1}Fe{sub 0.55}Nb{sub 0.45}O{sub 3} (PBFNO) solid solution was synthesized by single step solid state reaction method and the optimized parameters are 700°C for 2hr (calcination) and 800°C for 3hr (sintering). The formation of desired material was confirmed using X-Ray Diffraction (XRD) and Neutron Diffraction (ND) studies. The structural and magnetic properties of the sintered pellets were investigated at room temperature (RT) through XRD, ND and Magnetic (M-H) studies. The structural analysis was carried out by Rietveld refinement through the Full Prof program. Rietveld refined XRD and ND patterns confirms the monoclinic structure with Cm space group and obtained cell parameters from the ND data are a = 5.651(2) Å, b = 5.658(2) Å, c = 4.005(1) Å and α = 90°, β = 89.98(1)°, γ = 90°. RT M-H curve studies have been carried out. It shows the clear opening of hysteresis (M–H) loop, is evidenced as the existence of weak ferromagnetism at RT. The M-H data shows existence weak ferromagnetism embedded in an antiferromagnetic matrix structure. The dielectric constant with frequency shows the formation of barrier layers at the grain and grain boundary interfaces gives rise to interfacial space charge polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid Simulation of Unconventional Reservoirs by Multidomain Multiresolution Modeling Based on the Diffusive Time of Flight

Summary The fast marching method (FMM)-based rapid flow simulation has been shown to accelerate simulation efficiency by orders of magnitude by transforming 3D simulation to equivalent 1D simulation using the concept of the “diffusive time of flight” (DTOF). However, the 1D transformation does not directly apply to multiwell problems. In this paper, we propose a novel DTOF-based multidomain multiresolution discretization scheme to accelerate multiwell simulation of unconventional reservoirs. Our method formulates multiwell simulation problems based on the DTOF which displays the pressure front propagation in unconventional reservoirs. The DTOF contours are used to partition the reservoir into local and shared domains. A local domain is where the flow is dominated by a single well, and the shared domain is where the fluid flow is influenced by multiple wells. The DTOF contours expand independently in local domains and interfere in the shared domain. After the partitioning, each domain is discretized using a multiresolution scheme whereby the original 3D fine mesh is preserved near the wells to account for detailed physics including gravity, and the rest of the domain is discretized into 1D mesh based on the DTOF contours to alleviate the simulation workload. The power and efficacy of our approach are demonstrated using synthetic and field-scale simulation models with different degrees of geologic and well-completion complexity. The simulation results, number of active cells, and computation time for the proposed discretization scheme are compared with the original high-fidelity 3D model for each case. The results show that the proposed method is suitable for multiwell simulation problems in unconventional reservoirs and can accelerate flow simulations by orders of magnitude with minimal loss of accuracy. The novelty of this work is the creation of DTOF-derived multiresolution discretization with local and shared domains to simplify and accelerate the calculation of subsurface flow problems, especially in unconventional reservoirs. Our workflow can be easily interfaced with commercial simulators, making it suitable for large-scale field applications.

Engineering↗

Scalable and Cost-Effective Barrier Layer Coating to Improve Stability and Performance of SOFC Cathode

During this project, a dense GDC barrier layer was deposited on YSZ substrate to prevent chemical reaction between LSCF and YSZ by a cost-effective EPD method. PPy was used as the agent to make YSZ conductive. Highly compact GDC green layer was obtained by the EPD process in an ethanol-based suspension. The deposition rate on PPy coated YSZ is slower than that on graphite because the charge transfer process is the rate-determining step. The main resistance is from the ion accumulation/depletion zone. The H + ions reduced at the cathode consist of free H + ions and absorbed H + ions corresponding to the unavoidable electrochemical reaction and deposition, respectively. A factor f was introduced to reflects EPD efficiency and describe the competitive relationship between deposition and electrochemical reaction during EPD process. f is in the range from 0 to 0.5 which is determined by the amount ration between free H + ions and absorbed H + ions at the suspension/deposit interface and the conductivity of the cathode. f decreases with the increase of current density or applied voltage and the conductivity of the cathode. GDC thin layers formed by DC-EPD in a thickness range of 5-8 µm were successfully densified at as low as 1300 °C and the adhesion between GDC and YSZ was good. The densification temperature can be further reduced to 1250 °C when AC-EPD was used to replace DC-EPD. The deposition rate increases with the increase of duty cycle and voltage ratio. The deposition rate increases with the increase of frequency from 10 Hz to 500 Hz, while decrease when the frequency increases from 500 Hz to 5000 Hz. Desorption of absorbed charge carrier is easy and irreversible. The deposition rate is independent on the conductivity of the cathode when the electrochemical reaction can be ignored with a high frequency. Inter-diffusion of cation ions between the electrolyte and barrier layer has been systematically characterized via 3-D atom probe, TEM, and other techniques. No measurable Sr transport occurs across the GDC layer with a thickness of 1.5 – 6 μm at a LSCF processing temperature of 1000 °C. However, Sr transport does occur across GDC layer with a thickness of 1.5 or 3 μm at a higher LSCF sintering temperature (1000 °C or 1200 °C). The primary pathway are open pores or grain boundaries in the GDC. The observed zirconate layer is discontinuous even for the most extreme conditions (1.5 μm GDC, 1200 °C LSCF sintering temperature). Increasing the thickness of GDC to 4.5 μm can effectively suppress any zirconate formation measurable by SEM-EDX. Cobalt is observed at grain boundaries within the GDC, suggesting some depletion of Co from the LSCF layer that may ultimately impact electrode performance.

08 HYDROGEN↗

WIMS/PANTHER analysis of UO{sub 2}/MOX cores using embedded super-cells

This paper describes a method of analysing PWR UO{sub 2}MOX cores with WIMS/PANTHER. Embedded super-cells, run within the reactor code, are used to correct the standard methodology of using 2-group smeared data from single assembly lattice calculations. In many other codes the weakness of this standard approach has been improved for MOX by imposing a more realistic environment in the lattice code, or by improving the sophistication of the reactor code. In this approach an intermediate set of calculations is introduced, leaving both lattice and reactor calculations broadly unchanged. The essence of the approach is that the whole core is broken down into a set of 'embedded' super-cells, each extending over just four quarter assemblies, with zero leakage imposed at the assembly mid-lines. Each supercell is solved twice, first with a detailed multi-group pin-by-pin solution, and then with the standard single assembly approach. Correction factors are defined by comparing the two solutions, and these can be applied in whole core calculations. The restriction that all such calculations are modelled with zero leakage means that they are independent of each other and of the core-wide flux shape. This allows parallel pre-calculation for the entire cycle once the loading pattern has been determined, in much the same way that single assembly lattice calculations can be pre-calculated once the range of fuel types is known. Comparisons against a whole core pin-by-pin reference demonstrates that the embedding process does not introduce a significant error, even after burnup and refuelling. Comparisons against a WIMS reference demonstrate that a pin-by-pin multi-group diffusion solution is capable of capturing the main interface effects. This therefore defines a practical approach for achieving results close to lattice code accuracy, but broadly at the cost of a standard reactor calculation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Phase-field modeling of diffusion bonding in 316H stainless steel: Impact of processing conditions on grain morphology and bonding quality

A novel multi-phase, multi-component phase‐field model is presented to study the diffusion bonding of 316H stainless steel. Combined with targeted experimental investigations, this model simulates the bond-growth process and predicts the bonding quality. Unlike previous models, our approach captures the simultaneous evolution of voids and grain structures, while quantifying bonding quality using defined bonding ratio. A comprehensive analysis of bond process control is performed by changing temperature, pressure and surface roughness observing the resulting bond structure, which is consistent with experimental observations and analytical predictions. Temperature is determined to be the dominant factor, with the transition from a flat to a robust bond occurring between 1000 °C and 1050 °C. At the ideal bonding temperature of 1050 °C, a surface roughness exceeding 0.6 μm or an applied stress below 4 MPa results in poor bonding quality. Beyond this, higher pressures and smoother surfaces reduce void size, accelerate void shrinkage, and lead to improved bond integrity. This diffuse-interface model can be extended to other material systems if supplied with appropriate thermodynamic and kinetic data. In conclusion, this makes it an effective modeling platform for optimizing high-temperature diffusion bonding and developing reliable bonded components such as compact heat exchangers.

Diffusion bonding↗