Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Yield strength dependence on strain rate of molybdenum-alloy nanofibers

The yield strength dependence on strain rate was studied for molybdenum-alloy nanofibers with varying initial dislocation density at three different pre-strain levels. In-situ tensile experiments at three displacement rates were carried out in a scanning electron microscope. Yield strength and its scatter decreased as a function of the pre-strain level for different displacement rates. A statistical model was used to analyze the results, and a negative strain rate dependence was inferred from the yield experiments. This finding suggests the need for theoretical investigations since classical models such as dynamic strain aging may have limitations at such nanoscales.

36 MATERIALS SCIENCE↗

Investigation of single-layer/multilayer self-assembled InAs quantum dots on GaAs{sub 1-x}Sb{sub x}/GaAs composite substrates

The structure-performance properties of single-layered and multi-layered InAs/GaAs{sub 1−x}Sb{sub x} quantum dot (QD) system, grown by molecular beam epitaxy on GaAs (001) substrates, have been investigated as a function of Sb concentration. Electron microscopy observations showed no significant crystalline defects for the single-layered InAs QDs (Sb 20%). X-ray diffraction analysis revealed that the increase of Sb concentration from 7.3% to 10.2% for the multi-layered QDs increased the strain relaxation from 0% to ∼23% and the dislocation density of GaAsSb layers went up to 3.6 × 10{sup 9 }cm{sup −2}. The peak energy of QD luminescence was red-shifted with increasing Sb concentration due to reduced strain inside QDs. Moreover, the carrier lifetime of the QDs was highly improved from 1.7 to 36.7 ns due to weak hole confinement as the Sb concentration was increased from 7.3% to 10.2%. These structures should be highly promising as the basis for photovoltaic solar-cell applications. Finally, the increased Sb concentration increased the thermal activation energy of electrons confined in the QDs from 163.7 to 206.8 meV, which was indicative of the improved thermal stability with Sb concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, morphological and Raman studies of pulse electrosynthesised indium antimonide thin films

InSb films deposited on fluorine doped tin oxide (FTO) substrates by a pulse elctrodeposition technique. The deposition was carried out at an applied potential −1.3V versus Ag/AgCl electrode. Structural, morphological and optical studies were performed on the electrodeposited InSb. X-ray diffraction (XRD) studies show that the deposited InSb films are polycrystalline in nature having the zinc blend structure. The crystallite size (D), dislocation density (δ) and strain (ε) were calculated using XRD results. The EDAX analysis shows that chemical composition of In{sup 3+} and Sb{sup 3+} ions is close to the required stoichiometry. The surface morphology of the deposited films was examined using scanning electron microscopy (SEM). SEM studies reveal that the surface of the films is uniformly covered with submicron sized spherical particles. However, the crystallite size determined by the Scherrer method shows a size close to 30 nm. Surface morphology studies of the InSb films were also performed using atomic force microscopy (AFM). The average surface roughness as measured by AFM is around 40 nm. Hot probe studies show that all the electrodeposited thin films have n type conductivity and the thickness of the films is calculated using electrochemical formula.

36 MATERIALS SCIENCE↗

Microstructural, optical and electrical properties of CdS thin films grown by spray pyrolysis technique as a function of substrate temperature

In this research, nanocrystalline cadmium sulfide thin films were produced by the spray pyrolysis technique on glass substrates. The effects of substrate temperature in the range 400–550 °C on the structural, morphological, optical, and electrical properties of the thin films were investigated. The thin films have been characterized by investigating their X-ray diffraction, field emission scanning electron microscope (FE-SEM), and optical absorption (UV–Vis) measurements. X-ray analysis revealed that thin films were a polycrystalline structure with the hexagonal phase in all cases and by increasing in substrate temperature, crystallite size decreases, and dislocation density increases. The FE-SEM images showed that the surface of the thin films is uniform, homogeneous and without cracks. The average sizes of the grains are at the range of 210–235 nm. The obtained values for optical band gap have been in the range of 2.18–2.41 eV, where the value of optical band gap for the thin films decreases by increasing substrate temperature. The Urbach energies of the thin films increase as the substrate temperature is increased. When substrate temperature increased from 400 to 550 °C, electrical resistivity increased from 531 to 2817 Ω cm, carrier concentration decreased from 15.96 × 10{sup 14} to 3.71 × 10{sup 14} cm{sup −3}, Hall mobility decreased from 7.37 to 5.98 cm{sup 2}/V s. Hall effect analysis indicated that the thin films exhibited n-type conductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On the low carrier lifetime edge zone in multicrystalline silicon ingots

We have demonstrated the cause of low minority carrier lifetime corresponding to the edge zone of casting multicrystalline silicon ingots and its influence on the performance of solar cells. It is found that the concentration of substitutional carbon, interstitial oxygen, and dislocation density have no direct correlation with the low minority carrier lifetime in the edge zone. However, the distribution of interstitial iron exactly coincides with the minority carrier lifetime, indicating that iron contamination is mainly responsible for the lifetime degradation. After phosphorus diffusion gettering process, the low carrier lifetime region became narrower, and the concentration of interstitial iron is reduced by almost one order of magnitude. However, the carrier lifetime in the edge zone cannot be raised to average level. After celling process, the internal quantum efficiency map of the edge zone has a lower response to the long wavelength light, in accordance with the minority carrier lifetime distribution in this region. Therefore, the solar cells based on edge zones exhibit slightly lower efficiency than those conventional ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial growth of very large grain bicrystalline Cu(In,Ga)Se{sub 2} thin films by a hybrid sputtering method

Epitaxial bicrystals of Cu(In,Ga)Se{sub 2} (CIGS) have been grown and characterized spanning high angle incoherent grain boundaries. The grain boundaries in the CIGS were generally found to be fully dense, although voids were occasionally observed as is typical in CIGS polycrystals. There was no significant difference in composition of the grains across the boundary. No reduction in dislocation density near the grain boundary was found. X-ray diffraction results were consistent with partially strained epitaxial layers with domains tilted relative to the surface normal and with different rotations in the surface plane. The tetragonal symmetry of the unit cell appears to have affected the residual strain in the layers and the amount of misfit observed. The surface morphology was found to reflect trends observed in growth of single well-oriented crystals. Differences in surface potential of air-exposed grains showed a morphology-dependent work function. However, no significant potential difference was observed that was related to the grain boundary. Surface morphology effects were much greater. The surface showed a clear rotation of morphology across twin boundaries in the surface plane of one grain. The twin boundaries were also fully dense.

36 MATERIALS SCIENCE↗

Characterization of high quality InN grown on production-style plasma assisted molecular beam epitaxy system

In this work, the authors report step-flow growth mode of InN on [0001] oriented GaN templates, using a production-style molecular beam epitaxy system, Veeco GEN200 registered , equipped with a plasma source. Using adaptive growth conditions, they have obtained a surface morphology that exhibits the step-flow features. The root mean squared roughness over an area of 5x5 {mu}m{sup 2} is 1.4 nm with monolayer height terrace steps (0.281 nm), based on atomic force microscopy. It has been found that the presence of In droplets leads to defective surface morphology. From x-ray diffraction, they estimate edge and screw dislocation densities. The former is dominant over the latter. Micro-Raman spectra reveal narrow E{sub 2}{sup 2} phonon lines consistent with excellent crystalline quality of the epitaxial layers. The Hall mobility of 1 {mu}m thick InN layers, grown in step-flow mode, is slightly higher than 1400 cm{sup 2}/V s, while for other growth conditions yielding a smooth surface with no well-defined steps, mobility as high as 1904 cm{sup 2}/V s at room temperature has been measured. The samples exhibit high intensity photoluminescence (PL) with a corresponding band edge that shifts with free carrier concentration. For the lowest carrier concentration of 5.6x10{sup 17} cm{sup -3}, they observe PL emission at {approx}0.64 eV.

36 MATERIALS SCIENCE↗

Charge transport properties in CdZnTe detectors grown by the vertical Bridgman technique

Presently, a great amount of effort is being devoted to the development of CdTe and CdZnTe (CZT) detectors for a large variety of applications such as medical, industrial, and space research. We present the spectroscopic properties of some CZT crystals grown by the standard vertical Bridgman method and by the boron oxide encapsulated vertical Bridgman method, which has been recently implemented at IMEM-CNR (Parma, Italy). In this technique, the crystal is grown in an open quartz crucible fully encapsulated by a thin layer of liquid boron oxide. This method prevents contact between the crystal and the crucible, thereby allowing larger single grains with a lower dislocation density to be obtained. Several mono-electrode detectors were realized, with each having two planar gold contacts. The samples are characterized by an active area of about 7 mm x 7 mm and thicknesses ranging from 1 to 2 mm. The charge transport properties of the detectors have been studied by mobility-lifetime ({mu} x {tau}) product measurements, carried out at the European Synchrotron Radiation Facility (Grenoble, France) in the planar transverse field configuration, where the impinging beam direction is orthogonal to the collecting electric field. We have performed several fine scans between the electrodes with a beam spot of 10 {mu}m x 10 {mu}m at various energies from 60 to 400 keV. In this work, we present the test results in terms of the ({mu} x {tau}) product of both charge carriers.

36 MATERIALS SCIENCE↗

Effects of LPSO/α-Mg interfaces on dynamic recrystallization behavior of Mg96.5Gd2.5Zn1 alloy

Highlights: • The effects of LPSO/α-Mg interfaces on the dynamic recrystallization (DRX) behavior of Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} (at.%) alloy during indirect extrusion at 350 °C were investigated. • The LPSO/α-Mg interfaces in Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} alloy appeared as two groups, including the basal and non-basal LPSO/α-Mg interfaces, which have various effects on the DRX behavior of Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} alloy. • Compared with the basal LPSO/α-Mg interfaces, DRX grains are preferentially nucleated near the non-basal LPSO/α-Mg interfaces where there is higher V{sub GROD} and lower required energy E{sub s} for the DRX nucleation. - Abstract: Mg-Gd-Zn alloy, which contains a long period stacking ordered (LPSO) structure, has the potential to become a high-strength Mg alloy within the automotive and aerospace industries. Two types of LPSO/α-Mg interfaces in Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} (at.%) alloy were characterized, namely, basal and non-basal LPSO/α-Mg interfaces. The effects of LPSO/α-Mg interfaces on the dynamic recrystallization (DRX) behavior during indirect extrusion at 350 °C were investigated. The grain reference orientation deviation (GROD) value (V{sub GROD}), derived from EBSD, could qualitatively characterize the dislocation density within a grain and determine the presence of DRX grain nucleation. The results suggested that the areas around non-basal LPSO/α-Mg interfaces always have higher V{sub GROD} than do basal LPSO/α-Mg interfaces. In addition, the stored energy (E{sub s}) required for DRX nucleation on the non-basal LPSO/α-Mg interface is lower than that on the basal LPSO/α-Mg interface. This is a result of the flat, sharp basal LPSO/α-Mg interface compared to the faceted non-basal LPSO/α-Mg interface. Regardless of whether the LPSO structure/α-Mg matrix interface is coherent or not, non-basal LPSO/α-Mg interfaces are favorable nucleation sites for DRX grains due to the higher V{sub GROD} and lower required energy E{sub s}.

36 MATERIALS SCIENCE↗

Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite

Highlights: • Medium-Mn steel was innovatively designed for medium to heavy steel plates. • Three intercritical annealing processes were adopted to ensure TRIP effect. • Austenite-martensite submicro-laminate structure was obtained after annealing. • The reversed austenite with different stability led to improved ductility. • TRIP effect induced by metastable austenite contributed excellent impact properties. - Abstract: Medium-Mn steel was innovatively designed in terms of alloying elements for medium to heavy steel plates to obtain combination of high strength, good ductility, and excellent low temperature toughness. Martensite was the dominant microstructure in the directly quenched steel plate because of high hardenability obtained by the addition of 5.6 wt% Mn. Three intercritical annealing processes were adopted to ensure transformation-induced-plasticity (TRIP) effect through optimization of the volume fraction, morphology, and C and Mn-enriched reversed austenite. On annealing, the dislocation density of martensite plate was decreased because of recovery and recrystallization, and metastable austenite film nucleated at the interface. Both thermal and mechanical stability of austenite decreased with increase in annealing temperature. The high yield strength of 840 MPa, good elongation after fracture of 24.3%, and excellent toughness at − 60 °C of 130.3 J was obtained at intermediate annealing temperature of 650 °C, and the volume fraction of reversed austenite at room temperature and − 80 °C was 22% and 17%, respectively. The reversed austenite exhibited different stability with increased tensile strain, leading to improved ductility and delayed necking. Moreover, the crack initiation energy and crack propagation energy were increased via dynamic stress partitioning and relaxation together with the transformation of metastable austenite. Thus, significant degree of TRIP effect induced by moderate stability of austenite played an important role in governing mechanical properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Separation of bulk and surface electron transport in metamorphic InAs layers using quantitative mobility spectrum analysis

Electron transport in low dislocation density, strain-relaxed InAs layers grown on metamorphic InAs{sub y}P{sub 1-y}/InP substrates by molecular beam epitaxy was characterized using quantitative mobility spectrum analysis (QMSA) of Hall effect measurements. QMSA applied to systematically varied metamorphic InAs samples reveals high bulk electron mobilities of {approx}20 000 cm{sup 2}/V s at 300 K at a Si doping concentration of 1x10{sup 17} cm{sup -3}, simultaneously with a separate population of much slower electrons having an average mobility of {approx}2400 cm{sup 2}/V s due to parallel conduction within the InAs surface electron accumulation layer. Measurements made on higher doped samples reveal only a single electron population participating in transport due to lowered surface band bending that reduces surface accumulation of electrons in conjunction with the high conductivity of the high mobility metamorphic InAs bulk that overwhelms any remaining surface conductivity in the Hall effect measurements.

36 MATERIALS SCIENCE↗

Study on Texture Evolution and Shear Behavior of an Al/Ni/Cu Composite

The microstructure, texture, and mechanical properties of the Al/Ni/Cu composite during various accumulative roll bonding (ARB) cycles were studied using optical microscopy, scanning electron microscopy, x-ray diffraction, shear punch test, and hardness test. In addition, ImageJ software and Rietveld software were used in order to study microstructure and dislocation density variations, respectively. It was found that Ni and Cu layers were fractured and distributed in the Al matrix due to differences in their mechanical properties. Fracture and distribution of Cu and Ni particles after cycle five led to the alteration of the composite structure from a layered to a particle-reinforced structure. ARB process leads to the formation of strong orientation along the β-fiber and also to pronounced copper and dillamore components in both Al and Cu phases. Furthermore, the shear yield stress and ultimate shear strength of the composite increased as the ARB process advanced; however, shear elongation presented a non-uniform variation. Investigation of the fracture surfaces revealed that the mechanical properties of the composite are affected not only by the strain hardening of the Cu layer, but also by the structural change in the composite during the initial ARB cycles. During the last stages of the process, however, changes in mechanical properties were mostly governed by reinforcement particles serving as strain concentration zones and the strain hardening of the Al matrix.

36 MATERIALS SCIENCE↗

Towards large size substrates for III-V co-integration made by direct wafer bonding on Si

We report the first demonstration of 200 mm InGaAs-on-insulator (InGaAs-o-I) fabricated by the direct wafer bonding technique with a donor wafer made of III-V heteroepitaxial structure grown on 200 mm silicon wafer. The measured threading dislocation density of the In{sub 0.53}Ga{sub 0.47}As (InGaAs) active layer is equal to 3.5 × 10{sup 9} cm{sup −2}, and it does not degrade after the bonding and the layer transfer steps. The surface roughness of the InGaAs layer can be improved by chemical-mechanical-polishing step, reaching values as low as 0.4 nm root-mean-square. The electron Hall mobility in 450 nm thick InGaAs-o-I layer reaches values of up to 6000 cm{sup 2}/Vs, and working pseudo-MOS transistors are demonstrated with an extracted electron mobility in the range of 2000–3000 cm{sup 2}/Vs. Finally, the fabrication of an InGaAs-o-I substrate with the active layer as thin as 90 nm is achieved with a Buried Oxide of 50 nm. These results open the way to very large scale production of III-V-o-I advanced substrates for future CMOS technology nodes.

36 MATERIALS SCIENCE↗

A noticeable effect of novel Nd{sup 3+} doping on physical properties of nebulizer spray deposited AZO thin films for optoelectronic technology

In this work, neodymium (Nd) doped aluminum zinc oxide (Nd:AZO) films are prepared on glass substrates via simple spray nebulizer method for the first time. The different Nd doping concentrations were taken as 0%, 0.5%, 1% and 1.5 wt%, however, Al concentration was kept constant as 3 wt%. From X-ray diffraction (XRD) data, various structural properties like: crystallite size, microstrain, dislocation density, lattice constants and texture coefficient were investigated. XRD study confirmed that the Al and Nd were incorporated into ZnO. All the deposited films are of polycrystalline nature and hexagonal structure with (002) orientation. The topology studied by AFM showed that the film had low surface roughness and its values were slightly increased from 21 to 37 nm. Elemental mapping and EDAX studies confirmed the occurrence of Zn, O, Al and Nd in prepared Nd:AZO film. Transmission of deposited Nd:AZO film is around 92% in visible spectrum and estimated energy gap is ~ 3.31 eV. PL spectrum emitted one strong NBE emission at ~ 386 nm for all films, signify their better optical quality. Electrical parameters were studied by four probe measurement and low resistivity (ρ) i.e. ~ 4.12 × 10{sup −4} Ω cm and high carrier concentrations (n) i.e. ~ 3.96 × 10{sup 21} cm{sup −3} were observed for 1.5 wt% Nd:AZO films. The calculated value of ϕ is large as 14.33 × 10{sup −3} (Ω/sq){sup −1}, which are enough for an opto-electronic application.

36 MATERIALS SCIENCE↗

A simple Rice-Ashby ductile–brittle transition temperature (DBTT) model based on dislocation mobility for body-centered cubic complex concentrated alloys

A simple Rice-Ashby type model for ductile–brittle transition temperature (DBTT) of body-centered cubic (bcc) complex concentrated alloys (structures) is presented. The effect of accumulation of dislocation density on DBTT is also analyzed. The model results are compared with experimental yield stress vs. temperature data for four complex concentrated alloys: Nb 45 Ta 25 Ti 15 Hf 15 (NTTH), MoNbTaW, HfNbTaTiZr, NbTiZr and two pure bcc metals, Fe and W. It is shown that the DBTT behavior of these alloys and pure metals are in agreement with the simple ductility model presented in this manuscript. The DBTT model presented in this manuscript along with yield strength models for bcc complex concentrated alloys described in the literature should serve as a useful guide for designing such alloys with good high temperature strength and significant room temperature ductility.

Crack tip processes↗

Increasing minority carrier lifetime in as-grown multicrystalline silicon by low temperature internal gettering

We report a systematic study into the effects of long low temperature (≤500 °C) annealing on the lifetime and interstitial iron distributions in as-grown multicrystalline silicon (mc-Si) from different ingot height positions. Samples are characterised in terms of dislocation density, and lifetime and interstitial iron concentration measurements are made at every stage using a temporary room temperature iodine-ethanol surface passivation scheme. Our measurement procedure allows these properties to be monitored during processing in a pseudo in situ way. Sufficient annealing at 300 °C and 400 °C increases lifetime in all cases studied, and annealing at 500 °C was only found to improve relatively poor wafers from the top and bottom of the block. We demonstrate that lifetime in poor as-grown wafers can be improved substantially by a low cost process in the absence of any bulk passivation which might result from a dielectric surface film. Substantial improvements are found in bottom wafers, for which annealing at 400 °C for 35 h increases lifetime from 5.5 μs to 38.7 μs. The lifetime of top wafers is improved from 12.1 μs to 23.8 μs under the same conditions. A correlation between interstitial iron concentration reduction and lifetime improvement is found in these cases. Surprisingly, although the interstitial iron concentration exceeds the expected solubility values, low temperature annealing seems to result in an initial increase in interstitial iron concentration, and any subsequent decay is a complex process driven not only by diffusion of interstitial iron.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructural characterization of amorphous and nanocrystalline boron nitride prepared by high-energy ball milling

Microstructural parameters like crystallite size, lattice strain, stacking faults and dislocation density were evaluated from the X-ray diffraction data of boron nitride (BN) powder milled in a high-energy vibrational ball mill for different length of time (2-120 h), using different model based approaches like Scherrer analysis, integral breadth method, Williamson-Hall technique and modified Rietveld technique. From diffraction line-broadening analysis of the successive patterns of BN with varying milling time, it was observed that overall line broadening was an operative cause for crystallite size reduction at lower milling time ({approx}5 h), whereas lattice strains were the prominent cause of line broadening at higher milling times (>19 h). For intermediate milling time (7-19 h), both crystallite size and lattice strain influence the profile broadening although their relative contribution vary with milling time. Microstructural information showed that after long time milling (>19 h) BN becomes mixture of nanocrystalline and amorphous BN. The accumulations of defects cause this crystalline to amorphous transition. It has been found that twin fault ({beta}') and deformation fault ({alpha}) significantly contributed to BN powder as synthesized by a high-energy ball-milling technique. Present study consider only three ball-milled (0, 2 and 3 h) BN powder for faults calculation because fault effected reflections (1 0 1, 1 0 2, 1 0 3) disappear with milling time (>3 h). The morphology and particle size of the BN powders before and after ball milling were also observed in a field emission scanning electron microscope (FESEM)

36 MATERIALS SCIENCE↗

Ge{sub 1-y}Sn{sub y} (y = 0.01-0.10) alloys on Ge-buffered Si: Synthesis, microstructure, and optical properties

Novel hydride chemistries are employed to deposit light-emitting Ge{sub 1-y}Sn{sub y} alloys with y ≤ 0.1 by Ultra-High Vacuum Chemical Vapor Deposition (UHV-CVD) on Ge-buffered Si wafers. The properties of the resultant materials are systematically compared with similar alloys grown directly on Si wafers. The fundamental difference between the two systems is a fivefold (and higher) decrease in lattice mismatch between film and virtual substrate, allowing direct integration of bulk-like crystals with planar surfaces and relatively low dislocation densities. For y ≤ 0.06, the CVD precursors used were digermane Ge₂H₆ and deuterated stannane SnD₄. For y ≥ 0.06, the Ge precursor was changed to trigermane Ge₃H₈, whose higher reactivity enabled the fabrication of supersaturated samples with the target film parameters. In all cases, the Ge wafers were produced using tetragermane Ge₄H₁₀ as the Ge source. The photoluminescence intensity from Ge{sub 1–y}Sn{sub y}/Ge films is expected to increase relative to Ge{sub 1–y}Sn{sub y}/Si due to the less defected interface with the virtual substrate. However, while Ge{sub 1–y}Sn{sub y}/Si films are largely relaxed, a significant amount of compressive strain may be present in the Ge{sub 1–y}Sn{sub y}/Ge case. This compressive strain can reduce the emission intensity by increasing the separation between the direct and indirect edges. In this context, it is shown here that the proposed CVD approach to Ge{sub 1–y}Sn{sub y}/Ge makes it possible to approach film thicknesses of about 1 μm, for which the strain is mostly relaxed and the photoluminescence intensity increases by one order of magnitude relative to Ge{sub 1–y}Sn{sub y}/Si films. The observed strain relaxation is shown to be consistent with predictions from strain-relaxation models first developed for the Si{sub 1–x}Ge{sub x}/Si system. The defect structure and atomic distributions in the films are studied in detail using advanced electron-microscopy techniques, including aberration corrected STEM imaging and EELS mapping of the average diamond–cubic lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗