Search NASA⌕ Search

SEARCH · Search NASA

Results for “disordered solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Growth and Electronic Properties of GaN/ZnO Solid Solution Nanowires

We have grown single-crystal (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid-solution nanowires using nanostructured ZnGa{sub 2}O{sub 4} precursor prepared by a sol-gel method. From electrical transport measurements in individual nanowire field-effect transistors, we have identified the conduction as n-type and obtained a background carrier density (-10{sup 19} cm{sup -3}) and an electron mobility (-1 cm{sup 2}/V s) that are consistent with chemical disorder and a large number of charge traps, as confirmed by the devices photocurrent response. From the dependence of the device photoresponse on incident light wavelength, we have determined the energy band gap of (Ga{sub 0.88}Zn{sub 0.12})(N{sub 0.88}O{sub 0.12}) to be as much as -0.6 eV lower than that of GaN or ZnO.

08 HYDROGEN↗

Local and average structure of Mn- and La-substituted BiFeO{sub 3}

The local and average structure of solid solutions of the multiferroic perovskite BiFeO{sub 3} is investigated by synchrotron X-ray diffraction (XRD) and electron density functional theory (DFT) calculations. The average experimental structure is determined by Rietveld refinement and the local structure by total scattering data analyzed in real space with the pair distribution function (PDF) method. With equal concentrations of La on the Bi site or Mn on the Fe site, La causes larger structural distortions than Mn. Structural models based on DFT relaxed geometry give an improved fit to experimental PDFs compared to models constrained by the space group symmetry. Berry phase calculations predict a higher ferroelectric polarization than the experimental literature values, reflecting that structural disorder is not captured in either average structure space group models or DFT calculations with artificial long range order imposed by periodic boundary conditions. Only by including point defects in a supercell, here Bi vacancies, can DFT calculations reproduce the literature results on the structure and ferroelectric polarization of Mn-substituted BiFeO{sub 3}. The combination of local and average structure sensitive experimental methods with DFT calculations is useful for illuminating the structure-property-composition relationships in complex functional oxides with local structural distortions. - Graphical abstract: The experimental and simulated partial pair distribution functions (PDF) for BiFeO{sub 3}, BiFe{sub 0.875}Mn{sub 0.125}O{sub 3}, BiFe{sub 0.75}Mn{sub 0.25}O{sub 3} and Bi{sub 0.9}La{sub 0.1}FeO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure of boron and aluminum δ -doped layers in silicon

Recent work on atomic-precision dopant incorporation technologies has led to the creation of both boron and aluminum δ-doped layers in silicon with densities above the solid solubility limit. For this study, we use density functional theory to predict the band structure and effective mass values of such δ layers, first modeling them as ordered supercells. Structural relaxation is found to have a significant impact on the impurity band energies and effective masses of the boron layers, but not the aluminum layers. However, disorder in the δ layers is found to lead to a significant flattening of the bands in both cases. We calculate the local density of states and doping potential for these δ-doped layers, demonstrating that their influence is highly localized with spatial extents at most 4 nm. We conclude that acceptor δ-doped layers exhibit different electronic structure features dependent on both the dopant atom and spatial ordering. This suggests prospects for controlling the electronic properties of these layers if the local details of the incorporation chemistry can be fine-tuned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

High-entropy alloys (HEAs) are an intriguing new class of metallic materials due to their unique mechanical behavior. Achieving a detailed understanding of structure–property relationships in these materials has been challenged by the compositional disorder that underlies their unique mechanical behavior. Accordingly, in this work, we employ first-principles calculations to investigate the nature of local chemical order and establish its relationship to the intrinsic and extrinsic stacking fault energy (SFE) in CrCoNi medium-entropy solid-solution alloys, whose combination of strength, ductility, and toughness properties approaches the best on record. We find that the average intrinsic and extrinsic SFE are both highly tunable, with values ranging from –43 to 30 mJ•m –2 and from –28 to 66 mJ•m –2 , respectively, as the degree of local chemical order increases. The state of local ordering also strongly correlates with the energy difference between the face-centered cubic ( fcc ) and hexagonal close-packed ( hcp ) phases, which affects the occurrence of transformation-induced plasticity. Here, this theoretical study demonstrates that chemical short-range order is thermodynamically favored in HEAs and can be tuned to affect the mechanical behavior of these alloys. It thus addresses the pressing need to establish robust processing–structure–property relationships to guide the science-based design of new HEAs with targeted mechanical behavior.

36 MATERIALS SCIENCE↗

Compositional control of radionuclide retention in hollandite-based ceramic waste forms for Cs-immobilization

Hollandite materials, as a class of crystalline nuclear waste forms, are promising candidates for the immobilization of radioactive elements, such as Cs, Ba, as well as a variety of lanthanide and transition-metal fission products. In this study, three Ga-doped titanate hollandite-type phases, Ba 1.33 Ga 2.67 Ti 5.33 O 16 , Ba 0.667 Cs 0.667 Ga 2 Ti 6 O 16 , and Cs 1.33 Ga 1.33 Ti 6.67 O 16 , were synthesized using a solid-state reaction route. All synthesized phases adopted a single phase tetragonal structure, as determined by powder X-ray diffraction (XRD), and elemental analysis confirmed the measured stoichiometries were close to targeted compositions. Extended X-ray absorption fine structure spectroscopy (EXAFS) was used to determine the local structural features for the framework of octahedrally coordinated cations. EXAFS data indicated that Cs 1.33 Ga 1.33 Ti 6.67 O 16 possessed the most disordered local structure centered around the Ga dopant. The enthalpies of formation of all three hollandite phases measured using high-temperature oxide melt solution calorimetry were found to be negative, indicating enthalpies of formation of these hollandites from oxides are thermodynamically stable with respect to their constituent oxides. Furthermore, the formation enthalpies were more negative and hence more favorable with increased Cs content. Finally, aqueous leaching tests revealed that high Cs content hollandite phases exhibited greater Cs retention as compared to low Cs content hollandite. While preliminary in nature, this work draws attention to the links between the capacity for radionuclide retention, atomistic level structural features and bulk thermodynamic properties of materials.

nuclear (including radiation effects), materials a↗

Collaborative Research: failure of RockMasses from Nucleation and Growth of Microscopic Defects and Disorder

Over the 21 years of funding we have pursued several projects related to earthquakes, damage and nucleation. We developed simple models of earthquake faults which we studied to understand Gutenburg-Richter scaling, foreshocks and aftershocks, the effect of spatial structure of the faults and its interaction with underlying self organization and phase transitions. In addition we studied the formation of amorphous solids via the glass transition. We have also studied nucleation with a particular concentration on transitions in systems with a spatial symmetry change. In addition we investigated the nucleation process in models that mimic rock masses. We obtained the structure of the droplet in both homogeneous and heterogeneous nucleation. We also investigated the effect of defects or asperities on the nucleation of failure in simple models of earthquake faults.

58 GEOSCIENCES↗

Reverse order-disorder transition of Janus particles confined in two dimensions

In this study Janus particles with different patch sizes, confined to two dimensions, generate a series of patterns of interest to the field of nanoscience. Here we observe reverse melting, where for some densities the system melts under cooling. For a broad range of hydrophobic patch sizes ( 60° < θ 0 < 90°), a reentrant transition from solid to liquid and then to an ordered phase emerges as temperature (T) decreases due to the formation of rhombus chains at low T. This reentrant phase has pseudo long-range orientational order but short-range translational order, similar to a hexatic phase. Our work provides guidelines to study the melting and assembly of Janus particles in two dimensions, as well as mechanisms to generate phases with specific symmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solution-Grown Ternary Semiconductors: Nanostructuring and Stereoelectronic Lone Pair Distortions in I–V–VI 2 Materials

Alkali pnictogen dichalcogenides–I–V–VI 2 or APnCh 2 –have been identified as promising semiconducting materials for energy conversion devices. However, the controlled nanoscale synthesis and our understanding of the effects of cation ordering and stereochemically active lone pairs on the structures of these ternary compounds remain underdeveloped. Here, we use solution-phase chemistry to synthesize a family of APnCh 2 materials, including LiSbSe 2 , NaSbS 2 , NaSbSe 2 , NaBiS 2 , and NaBiSe 2 . Our approach utilizes alkali metal hydrides (AH) or carboxylates, A(O 2 CR), PnPh 3 , and elemental chalcogens as synthetic precursors and oleylamine or 1-octadecene as solvents. Synthetic manipulation via fine-tuning of reaction temperature enables control over the degree of ordering caused by the Sb 5s 2 lone pair-induced distortions in NaSbS 2 . Pair distribution function analysis demonstrates that the structure of the Sb-containing phases deviates much more from a disordered rock salt structure than that of the Bi-containing phases. This local distortion, induced by the Sb lone pair, leads to a previously unreported noncentrosymmetric NaSbS 2 crystal structure, which is additionally supported by second-harmonic generation measurements. Infrared and multinuclear solid-state NMR spectroscopies show that oleylamine or chelating carboxylates and, in some cases, unreacted precursors (LiH and PnPh 3 ) remain bound to the nanocrystalline surfaces. Further, a deeper understanding of the local atomic environment, long-range ordering, surface chemistry, and optoelectronic properties of these materials may speed up their fundamental study and application.

36 MATERIALS SCIENCE↗

Surface premelting of ice far below the triple point

Premelting of ice, a quasi-liquid layer (QLL) at the surface below the melting temperature, was first postulated by Michael Faraday 160 y ago. Since then, it has been extensively studied theoretically and experimentally through many techniques. Existing work has been performed predominantly on hexagonal ice, at conditions close to the triple point. Whether the same phenomenon can persist at much lower pressure and temperature, where stacking disordered ice sublimates directly into water vapor, remains unclear. Herein, we report direct observations of surface premelting on ice nanocrystals below the sublimation temperature using transmission electron microscopy (TEM). Similar to what has been reported on hexagonal ice, a QLL is found at the solid-vapor interface. It preferentially decorates certain facets, and its thickness increases as the phase transition temperature is approached. In situ TEM reveals strong diffusion of the QLL, while electron energy loss spectroscopy confirms its amorphous nature. More significantly, the premelting observed in this work is thought to be related to the metastable low-density ultraviscous water, instead of ambient liquid water as in the case of hexagonal ice. This opens a route to understand premelting and grassy liquid state, far away from the normal water triple point.

58 GEOSCIENCES↗

Synthesis, crystal structure and thermal behavior of Sr{sub 3}B{sub 2}SiO{sub 8} borosilicate

Single crystals of Sr{sub 3}B{sub 2}SiO{sub 8} were obtained by solid-state reaction of stoichiometric mixture at 1200 {sup o}C. The crystal structure of the compound has been solved by direct methods and refined to R1=0.064 (wR=0.133). It is orthorhombic, Pnma, a=12.361(4), b=3.927(1), c=5.419(1) A, V=263.05(11) A{sup 3}. The structure contains zigzag pseudo-chains running along the b axis and built up from corner sharing (Si,B)-O polyhedra. Boron and silicon are statistically distributed over one site with their coordination strongly disordered. Sr atoms are located between the chains providing three-dimensional linkage of the structure. The formation of Sr{sub 3}B{sub 2}SiO{sub 8} has been studied using annealing series in air at 900-1200 {sup o}C. According powder XRD, the probe contains pure Sr{sub 3}B{sub 2}SiO{sub 8} over 1100 {sup o}C. The compound is not stable below 900 {sup o}C. In the pseudobinary Sr{sub 2}B{sub 2}O{sub 5}-Sr{sub 3}B{sub 2}SiO{sub 8} system a new series of solid solutions Sr{sub 3-x}B{sub 2}Si{sub 1-x}O{sub 8-3x} (x=0-0.9) have been crystallized from melt. The thermal behavior of Sr{sub 3}B{sub 2}SiO{sub 8} was investigated using powder high-temperature X-ray diffraction (HTXRD) in the temperature range 20-900 {sup o}C. The anisotropic character of thermal expansion has been observed: {alpha}{sub a}= -1.3, {alpha}{sub b}=23.5, {alpha}{sub c}=13.9, and {alpha}{sub V}=36.1x10{sup -6} {sup o}C{sup -1} (25 {sup o}C); {alpha}{sub a}= -1.3, {alpha}{sub b}=23.2, {alpha}{sub c}=5.2, and {alpha}{sub V}=27.1x10{sup -6} {sup o}C{sup -1} (650 {sup o}C). Maximal thermal expansion of the structure along of the chain direction [0 1 0] is caused by the partial straightening of chain zigzag. Hinge mechanism of thermal expansion is discussed. - Graphical abstract: A fragment of Sr{sub 3}B{sub 2}SiO{sub 8} structure showing isolated B,Si-O pseudo-chain and Sr atom ellipsoids, comparing with pole figure of thermal expansion coefficients.

36 MATERIALS SCIENCE↗

A self-activated silicate phosphor of Na{sub 5}YZrSi{sub 6}O{sub 18}

Graphical abstract: Self-activated Na{sub 5}YZrSi{sub 6}O{sub 18} shows a bright green luminescence. It presents obvious LLP afterglow with duration time >3 h after the removal of excitation. The substitution of Y{sup 3+} by rare earth ions except Yb{sup 3+} cannot prolong the afterglow. It is proposed that the disorder in the lattices can result in different trap centers attributing to the long last phosphorescence. - Highlights: • Na{sub 5}YZrSi{sub 6}O{sub 18} was firstly developed to be a new bluish green-emitting silicate. • Na{sub 5}YZrSi{sub 6}O{sub 18} presents unusual properties: efficient excitation and longer emission wavelength. • Na{sub 5}YZrSi{sub 6}O{sub 18} shows long-lasting phosphorescence with duration time above 3 h. - Abstract: A new self-activated silicate phosphor of Na{sub 5}YZrSi{sub 6}O{sub 18} was prepared by a solid-state reaction method. The phase formation was confirmed by X-ray powder diffraction measurement. The photoluminescence excitation and emission spectra, X-ray-excited luminescence, decay curves, quantum efficiencies and the color coordinates were investigated. It can be efficiently excited by UV light and X-ray and presents unusual green emission (centered at 475 nm) from Zr{sup 4+} to O{sup 2−} charge transfer transition. Meanwhile, the phosphor shows long-lasting phosphorescence with duration time above 3 h after the removal of excitation. The afterglow curves and thermo-luminescence were measured for pure and rare earth ions (RE = Yb, Er, Ho, Dy, Tb, Sm, Nd) doped Na{sub 5}YZrSi{sub 6}O{sub 18}. The possible defects and the mechanism of long-lasting phosphorescence were suggested on the base of the strong disorder of the multiply cation sites in the lattices.

36 MATERIALS SCIENCE↗

Psychometric property study of the Affective Lability Scale-short form in Chinese patients with mood disorders

Introduction This study aimed to investigate the psychometric properties of the Affective Lability Scale-short form (ALS-SF) among Chinese patients with mood disorders, and to compare ALS-SF subscale scores between patients with major depressive disorder (MDD) and patients with bipolar disorder (BD) depression. Methods A total of 344 patients with mood disorders were included in our study. Participants were measured through a set of questionnaires including the Chinese version of ALS-SF, Patient Health Questionnaire-9 (PHQ-9), Generalized Anxiety Disorder 7-item (GAD-7), and NEO-Five Factor Inventory (NEO-FFI). Exploratory factor analysis and confirmatory factor analysis were applied to examine the psychometric properties of ALS-SF. Besides, correlation and regression analyses were performed to explore the relationship between affective lability and depression, anxiety, and neuroticism. Independent samples t -tests were used to compare the subscale scores of ALS-SF between the MDD and BD depression groups. Results Results of factor analysis indicated that the model of ALS-SF was consistent with ALS-SF. The ALS-SF showed a solid validity and high internal consistency (Cronbach’s alpha = 0.861). In addition, each subscale of ALS-SF was significantly correlated with PHQ-9, GAD-7, and NEO-FFI neuroticism subscale, except for the anger subscale showed no significant correlation with PHQ-9. Besides, the depression/elation and anger factor scores in patients with BD depression were higher than in patients with MDD. Conclusion Our study suggests that the Chinese version of ALS-SF has good reliability and validity for measuring affective lability in Chinese patients with mood disorders. Assessing affective lability would assist clinicians to distinguish between MDD and BP depression and may decrease the risks of misdiagnosis.

Ma, Mohan↗

Dynamics of Disorder-Order Transitions in Hard Sphere Colloidal Dispersions in micro-g

We performed a series of experiments on 0.518 millimeter PMMA spheres suspended in an index matching mixture of decalin and tetralin the microgravity environment provided by the Shuttle Columbia on mission STS-73. The samples ranged in concentration from 0.49 to 0.62. volume fraction (phi) of spheres, which covers the range in which liquid, coexistence, solid and glass phases are expected from Earth bound experiments. Light scattering was used to probe the static structure, and the particle dynamics. Digital and 35 mm photos provided information on the morphology of the crystals. In general, the crystallites grew considerably larger (roughly an order of magnitude larger) than the same samples with identical treatment in 1 g. The dynamic light scattering shows the typical short time diffusion and long time caging effects found in 1 g. The surprises that were encountered in microgravity include the preponderance of random hexagonal close packed (RHCP) structures and the complete absence of the expected face centered cubic (FCC) structure, existence of large dendritic crystals floating in the coexistence samples (where liquid and solid phases coexist) and the rapid crystallization of samples which exist only in glass phase under the influence of one g. These results suggest that colloidal crystal growth is profoundly effected by gravity in yet unrecognized ways. We suspect that the RCHP structure is related to the nonequilibrium growth that is evident from the presence of dendrites. An analysis of the dendritic growth instabilities is presented within the framework of the Ackerson-Schatzel equation.

Zhu, J. X.↗

Order–Disorder Transitions and Superionic Conductivity in the Sodium nido -Undeca(carba)borates

The salt compounds NaB 11 H 14 , Na-7-CB10H13, Li-7-CB 10 H 13 , Na-7,8-C 2 B 9 H 12 , and Na-7,9-C 2 B 9 H 12 all contain geometrically similar, monocharged, nido-undeca(carba)borate anions (i.e., truncated icosohedral-shaped clusters constructed of only 11 instead of 12 {B-H} + {C-H} vertices and an additional number of compensating bridging and/or terminal H atoms). We used first-principles calculations, X-ray powder diffraction, differential scanning calorimetry, neutron vibrational spectroscopy, neutron elastic-scattering fixed-window scans, quasielastic neutron scattering, and electrochemical impedance measurements to investigate their structures, bonding potentials, phase-transition behaviors, anion orientational mobilities, and ionic conductivities compared to those of their closo-poly(carba)borate cousins. All exhibited order-disorder phase transitions somewhere between room temperature and 375 K. All disordered phases appear to possess highly reorientationally mobile anions (> ~10 10 jumps s -1 above 300 K) and cation-vacancy-rich, close-packed or body-center-cubic-packed structures [like previously investigated closo-poly(carba)borates]. Moreover, all disordered phases display superionic conductivities but with generally somewhat lower values compared to those for the related sodium and lithium salts with similar monocharged 1-CB 9 H 10 - and CB 11 H 12 - closo-carbaborate anions. This study significantly expands the known toolkit of solid-state, poly(carba)borate-based salts capable of superionic conductivities and provides valuable insights into the effect of crystal lattice, unit cell volume, number of carbon atoms incorporated into the anion, and charge polarization on ionic conductivity.

36 MATERIALS SCIENCE↗

An X-ray magnetic circular dichroism (XMCD) study of Fe ordering in a synthetic MgAl2O4 – Fe3O4 (spinel – magnetite) solid solution series; implications for magnetic properties and cation site ordering

Fe L2,3-edge XAS and XMCD studies have been used to unravel structural trends in the MgAl2O4–Fe3O4, solid solution where thermodynamic modelling has represented a challenge due to the complex ordering arrangements of the end-members. Partitioning of Fe3+ and Fe2+ between tetrahedral (Td) and octahedral (Oh) sites has been established. In the most Fe-rich samples, despite rapid quenching from a disordered state, Fe2+Td is not present which matches the ordered, inverse spinel nature of end-member magnetite (Mgt) at room-T. However, in intermediate compositions Al and Mg substantially replace Fe and small amounts of Fe2+Td are found, stabilized or trapped by decreasing occurrence of the continuous nearest neighbour Fe – Fe interactions which facilitate charge redistribution by electron transfer. Furthermore, in the composition range ~Mgt0.4-0.9, XAS and XMCD bonding and site occupancy data suggest that nano-scale, magnetite-like Fe clusters are present. By contrast, at the spinel-rich end of the series, Mgt0.17 and Mgt0.23 have a homogeneous long-range distribution of Fe, Mg and Al. These relationships are consistent with the intermediate and Fe-rich samples falling within a wide solvus in this system such that the Fe-clusters occur as proto-nuclei for phases which would exsolve following development of long-range crystalline order during slow cooling. Calculated saturation magnetic moments (Ms) for the Fe-rich samples show excellent agreement with measured values but for the most Mg-rich samples are displaced to slightly higher values; this displacement is due to the presence of abundant Mg and Al disrupting the anti-parallel alignment of electron spins for Fe atoms.

Henderson, C. Michael B.↗

Towards Ab-Initio Simulations of Crystalline Defects at the Exascale Using Spectral Quadrature Density Functional Theory

Defects in crystalline solids play a crucial role in determining properties of materials at the nano, meso- and macroscales, such as the coalescence of vacancies at the nanoscale to form voids and prismatic dislocation loops or diffusion and segregation of solutes to nucleate precipitates, phase transitions in magnetic materials via disorder and doping. First principles Density Functional Theory (DFT) simulations can provide a detailed understanding of these phenomena. However, the number of atoms needed to correctly simulate these systems is often beyond the reach of many widely used DFT codes. The aim of this article is to discuss recent advances in first principles modeling of crystal defects using the spectral quadrature method. The spectral quadrature method is linear scaling with respect to the number of atoms, permits spatial coarse-graining, and is capable of simulating non-periodic systems embedded in a bulk environment, which allows the application of appropriate boundary conditions for simulations of crystalline defects. In this article, we discuss the state-of-the-art in ab-initio modeling of large metallic systems of the order of several thousand atoms that are suitable for utilizing exascale computing resourses.

36 MATERIALS SCIENCE↗

Kinetically Controlled Nanostructure Formation in Self-Assembled Globular Protein–Polymer Diblock Copolymers

Aqueous processing of globular protein–polymer diblock copolymers into solid-state materials and subsequent solvent annealing enables kinetic and thermodynamic control of nanostructure formation to produce block copolymer morphologies that maintain a high degree of protein fold and function. When model diblock copolymers composed of mCherry-b-poly(N-isopropylacrylamide) are used, orthogonal control over solubility of the protein block through changes in pH and the polymer block through changes in temperature is demonstrated during casting and solvent annealing. Hexagonal cylinders, perforated lamellae, lamellae, or hexagonal and disordered micellar phases are observed, depending on the coil fraction of the block copolymer and the kinetic pathway used for self-assembly. Here, good solvents for the polymer block produce ordered structures reminiscent of coil–coil diblock copolymers, while an unfavorable solvent results in kinetically trapped micellar structures. Decreasing solvent quality for the protein improves long-range ordering, suggesting that the strength of protein interactions influences nanostructure formation. Subsequent solvent annealing results in evolution of the nanostructures, with the best ordering and the highest protein function observed when annealing in a good solvent for both blocks. While protein secondary structure was found to be almost entirely preserved for all processing pathways, UV–vis spectroscopy of solid-state films indicates that using a good solvent for the protein block enables up to 70% of the protein to be retained in its functional form.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗