Search NASA⌕ Search

SEARCH · Search NASA

Results for “doping effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Effect of a Nitrogen Doping and a Mechanical Stress on the Adsorption Capacity of Graphdiene

The quantum chemical simulation of adsorption of atomic hydrogen on pristine and nitrogen-doped graphdienes has been performed. The preferential sites, adsorption on which is most energetically beneficial, are indicated. The nitrogen presence is shown to substantially increase the adsorption capacity of the sheet. A capacity of the nitrogen-doped graphdiene to be reversibly stretched by 4% under action of external mechanical stress is demonstrated. A mechanical stretching is found to enable the control of the adsorption properties of pristine and also doped graphdienes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of p-doping on the intensity noise of epitaxial quantum dot lasers on silicon

This work experimentally investigates the impact of p-doping on the relative intensity noise (RIN) properties and subsequently on the modulation properties of semiconductor quantum dot (QD) lasers epitaxially grown on silicon. Owing to the low threading dislocation density and the p-modulation doped GaAs barrier layer in the active region, the RIN level is found very stable with temperature with a minimum value of − <#comment/> 150 d B / H z . The dynamical features extracted from the RIN spectra show that p-doping between zero and 20 holes/dot strongly modifies the modulation properties and gain nonlinearities through increased internal losses in the active region and thereby hinders the maximum achievable bandwidth. Overall, this Letter is important for designing future high-speed and low-noise QD devices integrated in future photonic integrated circuits.

Duan, Jianan (ORCID:0000000177104287)↗

Room Temperature Thin Film Ba(x)Sr(1-x)TiO3 Ku-Band Coupled MicrostripPhase Shifters: Effects of Film Thickness, Doping, Annealing and Substrate Choice

We report on measurements taken on over twenty Ku-band coupled microstrip phase shifters (CMPS) using thin ferroelectric films of Ba(x)Sr(1-x)TiO3. This CMPS design is a recent innovation designed to take advantage of the high tunability and tolerate the high dielectric constant of ferroelectric films at Ku- and K-band frequencies. These devices are envisioned as a component in low-cost steerable beam phased area antennas, Comparisons are made between devices with differing film thickness, annealed vs unannealed, Mn-doped vs. undoped, and also substrates of LaAlO3 and MgO. A comparison between the CMPS structure and a CPW phase shifter was also made oil the same ferroelectric film.

VanKeuls, F. W.↗

Effect of Na-doped Mo on Selenization Pathways for CuGa/In Metallic Precursors

Reaction pathways were followed for selenization of CuGa/In precursor structures using in-situ high temperature X-ray diffraction (HTXRD). Precursor films were deposited on Na-free and Na-doped Mo (3 and 5 at %)/Na-free glass. The precursor film was constituted with CuIn, In, Cu9Ga4, Cu3Ga, Cu16In9 and Mo. HTXRD measurements during temperature ramp selenization showed CIS formation occurs first, followed by CGS formation, and then mixing on the group III sub-lattice to form CIGS. CIGS formation was observed to be complete at ~450 C for samples deposited on 5 at % Na-doped Mo substrates. MoSe2 formation was evidenced after the CIGS synthesis reaction was complete. The Ga distribution in the annealed CIGS was determined by Rietveld refinement. Isothermal reaction studies were conducted for CIGS (112) formation in the temperature range 260-320 C to estimate the rate constants.

Krishnan, Rangarajan↗

Narrowing the band gap and suppressing electron–hole recombination in β-Fe 2 O 3 by chlorine doping

Here, the effects of halogen (F, Cl, Br, I, and At) doping in the direct-band-gap β-Fe 2 O 3 semiconductor on its band structures and electron–hole recombination have been investigated by density functional theory. Doping Br, I, and At in β-Fe 2 O 3 leads to transformation from a direct-band-gap semiconductor to an indirect-band-gap semiconductor because their atomic radii are too large; however, F- and Cl-doped β-Fe 2 O 3 remain as direct-band-gap semiconductors. Due to the deep impurity states of the F dopant, this study focuses on the effects of the Cl dopant on the band structures of β-Fe 2 O 3 . Two impurity levels are introduced when Cl is doped into β-Fe 2 O 3 , which narrows the band gap by approximately 0.3 eV. After doping Cl, the light-absorption edge of β-Fe 2 O 3 redshifts from 650 to 776 nm, indicating that its theoretical solar to hydrogen efficiency for solar water splitting increases from 20.6% to 31.4%. In addition, the effective mass of the holes in halogen-doped β-Fe 2 O 3 becomes significantly larger than that in undoped β-Fe 2 O 3 , which may suppress electron–hole recombination.

30 DIRECT ENERGY CONVERSION↗

Low-frequency dielectric properties of intrinsic and Al-doped rutile TiO{sub 2} thin films grown by the atomic layer deposition technique

Dielectric spectroscopy is carried out for intrinsic and aluminum-doped TiO{sub 2} rutile films which are deposited on RuO{sub 2} by the atomic layer deposition technique. Capacitance and conductance are measured in the 0.1 Hz–100 kHz range, for ac electric fields up to 1 MV{sub rms}/cm. Intrinsic films have a much lower dielectric constant than rutile crystals. This is ascribed to the presence of oxygen vacancies which depress polarizability. When Al is substituted for Ti, the dielectric constant further decreases. By considering Al-induced modification of polarizability, a theoretical relationship between the dielectric constant and the Al concentration is proposed. Al doping drastically decreases the loss in the very low frequency part of the spectrum. However, Al doping has almost no effect on the loss at high frequencies. The effect of Al doping on loss is discussed through models of hopping transport implying intrinsic oxygen vacancies and Al related centers. When increasing the ac electric field in the MV{sub rms}/cm range, strong voltage non-linearities are evidenced in undoped films. The conductance increases exponentially with the ac field and the capacitance displays negative values (inductive behavior). Hopping barrier lowering is proposed to explain high-field effects. Finally, it is shown that Al doping strongly improves the high-field dielectric behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving dielectric properties of epitaxial Gd{sub 2}O{sub 3} thin films on silicon by nitrogen doping

We report about the effect of nitrogen doping on the electrical properties of epitaxial Gd{sub 2}O{sub 3} thin films. Epitaxial Gd{sub 2}O{sub 3}:N thin films were grown on Si (111) substrates by solid source molecular beam epitaxy using nitrous oxide as the nitridation agent. Substitutional nitrogen incorporation into the dielectric layer was confirmed by secondary ion mass spectroscopy and X-ray photoelectron spectroscopy analysis. Substantial reduction of the leakage current density and disappearance of hysteresis in capacitance-voltage characteristics observed in the Gd{sub 2}O{sub 3}:N layers indicate that nitrogen incorporation in Gd{sub 2}O{sub 3} effectively eliminates the adverse effects of the oxygen vacancy induced defects in the oxide layer.

36 MATERIALS SCIENCE↗

Effect of divalent (Sr, Ba) doping on the structural and magnetic properties of BiFeO{sub 3}

The effect of divalent substitution on the crystal structure and magnetic properties of BiFeO{sub 3} has been investigated using X-ray diffraction and magnetic measurements technique. Single phase Bi{sub 0.8}A{sub 0.2}FeO{sub 3} (A= Sr, Ba) multiferroics have been synthesized by solid state reaction method. Rietveld analysis of the XRD patterns revealed that the prepared ceramics exhibit rhombohedral structure with space group R3c. M–H hysteresis loops were recorded at 5K revealed that Sr and Ba substitution transformed antiferromagnetic BiFeO3 into weak ferromagnetic. The enhanced magnetization with Sr and Ba addition is confirmed by the MT curve recorded at 1T. It is closely related to intrinsic structural distortion and modification of the antiparallel spin structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of V{sub Zn}/V{sub O} on Stability, Magnetism, and Electronic Characteristic of Oxygen Ions for Li-Doped ZnO

The effects of Zn/O vacancy (V{sub Zn}/V{sub O}) and different proportions of Li/V{sub Zn} on the magnetism of Li-doped ZnO are analyzed through first-principle calculation by using generalized gradient approximation+ U (GGA + U) under density functional theory. Results reveal that Li-doped ZnO with V{sub Zn} can realize ferromagnetic long-range order and has a Curie temperature above room temperature. Under different proportions of Li/V{sub Zn} (i.e., 1:1, 1:2, and 2:2) in ZnO (2 × 2 × 4), the doping system containing 2Li/2V{sub Zn} (Zn{sub 28}Li{sub 2}O{sub 32}) shows the greatest magnetic moment and the smallest differential charge density. These characteristics pave the way for enhancing the magnetic properties of dilute magnetic semiconductors. The oxygen atoms in Zn{sub 28}Li{sub 2}O{sub 32} show acceptor and donor characteristics and exist in the forms of itinerant electrons (O{sup 1−}) and local electrons (O{sup 2−}), which have different effects on Zn{sub 28}Li{sub 2}O{sub 32} magnetism. The spin-polarization double-exchange effect among the unpaired itinerant electron (O{sup 1−}) orbit, local electron (O{sup 2−}) orbit, and unpaired Zn-3d electron orbit is the origin of magnetism for Li-doped ZnO with V{sub Zn}. By contrast, the doping systems of Li-doped ZnO with V{sub O} are nonmagnetic, rendering such systems inapplicable.

36 MATERIALS SCIENCE↗

Effect of rapid thermal processing on copper precipitation in p/p{sup +} silicon epitaxial wafers with heavily boron-doped substrates

The effect of rapid thermal processing (RTP) on the formation of copper precipitation in p/p{sup +} silicon (Si) epitaxial wafers was systematically investigated by defect etching and optical microscopy. After RTP preannealing at high temperature (1250 °C/60 s, with cooling rate 30 K/s) followed by the 750 °C/8 h + 1050 °C/16 h low-high (L-H) two-step annealing, it was revealed that the bulk microdefects were found only inside the p{sup +} substrate, manifesting no defects generated in the epitaxial layer. However, it was found that the width of denude zone (DZ) in samples only subjected to L-H two-step annealing was narrower than that of epitaxial layer, which meant that oxygen precipitation was formed in epitaxial layer. It can be concluded that RTP was beneficial to the formation of DZ. Additionally, it was found that the width of DZ has a sharp dependence on the introducing temperature of copper contamination, that is, the corresponding equilibrium concentration of interstitial copper in the Si influence the thermodynamics and kinetics process of the formation of copper precipitation significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental reduction of laser imprinting and Rayleigh–Taylor growth in spherically compressed, medium-Z-doped plastic targets

The effect of medium-Z doping of plastic ablators on laser imprinting and Rayleigh–Taylor (RT) instability growth was studied using spherical direct-drive implosions on the OMEGA Laser System [T. R. Boehly et al., Opt. Commun. 133, 495 (1977)]. The targets were spherical plastic (CH) shells, with an outer diameter of 860 μm and a thickness of 22 μm, volume doped with a varied concentration of Si (4.3% and 7.4%) and Ge (3.9%). The targets were imploded with 48 beams with a low-adiabat, triple-picket laser shape pulse with a peak intensity of 4×1014W/cm2, and a pulse duration of 2.5 ns. The shells were x-ray radiographed through a 40 -μm opening in the side of the target. The results show that volumetric impurity doping strongly reduces the shell density modulation and the instability growth rate. The amplitude of the initial imprint is reduced by a factor of 2.5 ±0.5 for CH[4.3% Si] targets and by a factor of 3 ±0.5 for CH[7.4% Si] and CH[3.9% Ge] targets. At the end of the acceleration phase, the reduction factor becomes 3 ±0.5 and 5 ± 0.5, correspondingly. The RT instability growth rate in doped targets is reduced by a factor of 1.5 compared to undoped ones. Simulations using the two-dimensional, radiation-hydrodynamics code draco show good agreement with the measurements

Fiksel, G.↗

Conduction band edge effective mass of La-doped BaSnO{sub 3}

BaSnO{sub 3} has attracted attention as a promising material for applications requiring wide band gap, high electron mobility semiconductors, and moreover possesses the same perovskite crystal structure as many functional oxides. A key parameter for these applications and for the interpretation of its properties is the conduction band effective mass. We measure the plasma frequency of La-doped BaSnO{sub 3} thin films by glancing incidence, parallel-polarized resonant reflectivity. Using the known optical dielectric constant and measured electron density, the resonant frequency determines the band edge electron mass to be 0.19 ± 0.01. The results allow for testing band structure calculations and transport models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗