SEARCH · Search NASA

Results for “edge computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

DOE OSTI2019

PCS: A Productive Computational Science Platform

As modern supercomputers continue to be increasingly heterogeneous with diverse computational accelerators, software becomes a critical aspect necessary to fully exploit these accelerators while not increasing the effort and time required to make variable scientific discovery in the face of complicated programming environments introduced by these accelerators. This paper presents PCS, a productive computational science platform for cluster-scale heterogeneous computing. The PCS platform by design follows a basic principle that, multiple programming models in a unified programming environment, is essential to facilitate large-scale, accelerator-aware, heterogeneous computing for next-generation scientific applications. We propose a new scheme — Edge Neural Network — for managing regularity in large dataflow graphs using higher-order bulk synchronous operators, providing a foundation for formalizing computational models for cluster-wide dataflow programming of heterogeneous clusters.

Ojika, David↗

NASA NTRS2003

Reconfigurable Hardware Adapts to Changing Mission Demands

A new class of computing architectures and processing systems, which use reconfigurable hardware, is creating a revolutionary approach to implementing future spacecraft systems. With the increasing complexity of electronic components, engineers must design next-generation spacecraft systems with new technologies in both hardware and software. Derivation Systems, Inc., of Carlsbad, California, has been working through NASA s Small Business Innovation Research (SBIR) program to develop key technologies in reconfigurable computing and Intellectual Property (IP) soft cores. Founded in 1993, Derivation Systems has received several SBIR contracts from NASA s Langley Research Center and the U.S. Department of Defense Air Force Research Laboratories in support of its mission to develop hardware and software for high-assurance systems. Through these contracts, Derivation Systems began developing leading-edge technology in formal verification, embedded Java, and reconfigurable computing for its PF3100, Derivational Reasoning System (DRS ), FormalCORE IP, FormalCORE PCI/32, FormalCORE DES, and LavaCORE Configurable Java Processor, which are designed for greater flexibility and security on all space missions.

Source record↗

NASA NTRS1990

Unsteady inviscid and viscous computations for vortex-dominated flows

The unsteady supersonic flow around a rigid sharp-edged delta wing is solved using the unsteady Euler and thin-layer Navier-Stokes equations. The problem is formulated relative to a moving frame of reference so that computation of the grid motion is not required. A three-dimensional, implicit, aproximately factored, central-differencing, finite-volume scheme is used to obtain the time-accurate, unsteady, locally conical flow. The inviscid and viscous results are compared during the periodic response of a wing undergoing forced rolling-oscillation motion. The results show substantial differences in the surface pressure results and other distributed flow characteristics. These differences are attributed to the inviscid and viscous flow predictions in the vortex-dominated regions. The results of the total loads do not show any significant differences.

Kandil, Osama A.↗

NASA NTRS1992

Navier-Stokes analysis of an oxidizer turbine blade with tip clearance

The Gas Generator Oxidizer Turbine (GGOT) Blade is being analyzed by various investigators under the NASA MSFC sponsored Turbine Stage Technology Team design effort. The present work concentrates on the tip clearance region flow and associated losses; however, flow details for the passage region are also obtained in the simulations. The present calculations simulate the rotor blade row in a rotating reference frame with the appropriate coriolis and centrifugal acceleration terms included in the momentum equation. The upstream computational boundary is located about one axial chord from the blade leading edge. The boundary conditions at this location were determined by using a Euler analysis without the vanes to obtain approximately the same flow profiles at the rotor as were obtained with the Euler stage analysis including the vanes. Inflow boundary layer profiles are then constructed assuming the skin friction coefficient at both the hub and the casing. The downstream computational boundary is located about one axial chord from the blade trailing edge, and the circumferentially averaged static pressure at this location was also obtained from the Euler analysis. Results were obtained for the 3-D baseline GGOT geometry at the full scale design Reynolds number. Details of the clearance region flow behavior and blade pressure distributions were computed. The spanwise variation in blade loading distributions are shown, and circumferentially averaged spanwise distributions of total pressure, total temperature, Mach number, and flow angle are shown at several axial stations. The spanwise variation of relative total pressure loss shows a region of high loss in the region near the casing. Particle traces in the near tip region show vortical behavior of the fluid which passes through the clearance region and exits at the downstream edge of the gap.

Gibeling, Howard J.↗

NASA NTRS1992

Reynolds number and cowl position effects for a generic sidewall compression scramjet inlet at Mach 10 - A computational and experimental investigation

Reynolds number and cowl position effects on the internal shock structure and the resulting performance of a generic three-dimensional sidewall compression scramjet inlet with a leading edge sweep of 45 degrees at Mach 10 have been examined both computationally and experimentally. Prior to the experiment, a three-dimensional Navier-Stokes code was adapted to perform preliminary parametric studies leading to the design of the present configuration. Following this design phase, the code was then utilized as an analysis tool to provide a better understanding of the flow field and the experimental static pressure data for the final experimental configuration. The wind tunnel model possessed 240 static pressure orifices distributed on the forebody plane, sidewalls, and cowl and was tested in the NASA Langley 31 Inch Mach 10 Tunnel.

Holland, Scott D.↗

NASA NTRS1992

Reynolds Number and Cowl Position Effects for a Generic Sidewall Compression Scramjet Inlet at Mach 10: A Computational and Experimental Investigation

Holland, Scott D.↗

DOE OSTI2020

Summer Proceedings 2019

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia for focused collaborative research on Department of Energy (DOE) computer and computational science problems. The institute provides an opportunity for university researchers to learn about problems in computer and computational science at DOE laboratories. Participants conduct leading-edge research, interact with scientists and engineers at the laboratories, and help transfer results of their research to programs at the labs. Some specific CSRI research interest areas are: scalable solvers, optimization, adaptivity and mesh refinement, graph-based, discrete, and combinatorial algorithms, uncertainty estimation, mesh generation, dynamic load-balancing, virus and other malicious-code defense, visualization, scalable cluster computers and heterogeneous computers, data-intensive computing, environments for scalable computing, parallel input/output, advanced architectures, and theoretical computer science. The CSRI Summer Program includes the organization of a weekly seminar series and the publication of this summer proceedings.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

CSRI Summer Proceedings 2020

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia for focused collaborative research on Department of Energy (DOE) computer and computational science problems. The institute provides an opportunity for university researchers to learn about problems in computer and computational science at DOE laboratories. Participants conduct leading-edge research, interact with scientists and engineers at the laboratories, and help transfer results of their research to programs at the labs. Some specific CSRI research interest areas are: scalable solvers, optimization, adaptivity and mesh refinement, graph-based, discrete, and combinatorial algorithms, uncertainty estimation, mesh generation, dynamic load-balancing, virus and other malicious-code defense, visualization, scalable cluster computers, data-intensive computing, environments for scalable computing, parallel input/output, advanced architectures, and theoretical computer science. The CSRI Summer Program is organized by CSRI and typically includes the organization of a weekly seminar series and the publication of a summer proceedings. In 2020, the CSRI summer program was executed completely virtually; all student interns worked from home, due to the COVID-19 pandemic.

97 MATHEMATICS AND COMPUTING↗

NASA NTRSDate not supplied

Edge Based Viscous Method for Node-Centered Formulations

This paper presents a novel, efficient, conservative, edge-based method for evaluation of mean flow viscous fluxes and turbulence-model diffusion terms of the Reynolds-averaged Navier-Stokes equations on tetrahedral grids. The new method is implemented in a practical, node-centered, finite-volume computational fluid dynamics solver. The baseline finite-volume scheme that is equivalent to a second-order accurate finite-element Galerkin approximation of viscous stresses is reformulated. The order of operations to compute the cell-based Green-Gauss gradients is changed to combine the operations by edge, which leads to an equivalent formulation on tetrahedral grids, improves efficiency, and preserves the compact discretization stencil based on the nearest neighbors. The computational results presented in this paper verify the implementation of this edge-based method by comparing its accuracy and iterative convergence with those of the well verified and validated baseline formulation. Efficiency gains for residual and Jacobian evaluations result in significant reduction of time to solution. This novel edge-based formulation on tetrahedra can be seamlessly combined with the baseline formulation on cells of other types for computing solutions on mixed-element grids.

Edge Based↗

NASA NTRS2000

Heat Transfer in a Complex Trailing Edge Passage for a High Pressure Turbine Blade - Part 1: Experimental Measurements: Experimental Measurements - Part 1

A combined experimental and computational study has been performed to investigate the detailed heat transfer coefficient distributions within a complex blade trailing edge passage. The experimental measurements are made using a steady liquid crystal thermography technique applied to one major side of the passage. The geometry of the trailing edge passage is that of a two-pass serpentine circuit with a sharp 180-degree turning region at the tip. The upflow channel is split by interrupted ribs into two major subchannels, one of which is turbulated. This channel has an average aspect ratio of roughly 14:1. The spanwise extent of the channel geometry includes both area convergence from root to tip, as well as taper towards the trailing edge apex. The average section Reynolds numbers tested in this upflow channel range from 55,000 to 98,000. The tip section contains a turning vane near the extreme comer. The downflow channel has an aspect ratio of about 5:1, and also includes convergence and taper. Turbulators of varying sizes are included in this channel also. Both detailed heat transfer and pressure distribution measurements are presented. The pressure measurements are incorporated into a flow network model illustrating the major loss contributors.

Bunker, Ronald S.↗

DOE OSTI2025

Efficient sparse state preparation via quantum walks

Continuous-time quantum walks (CTQWs) on dynamic graphs, referred to as dynamic CTQWs, are a recently introduced universal model of computation that offers a new paradigm in which to envision quantum algorithms. In this work, we develop an algorithm that converts single-edge and self-loop dynamic CTQWs to the gate model of computation. We use this mapping to introduce an efficient sparse quantum state preparation framework based on dynamic CTQWs. Our approach utilizes combinatorics techniques such as minimal hitting sets, minimum spanning trees, and shortest Hamiltonian paths to reduce the number of controlled gates required to prepare sparse states. We show that our framework encompasses the current state of the art ancilla-free sparse state preparation method by reformulating this method as a CTQW. This CTQW-based framework offers an alternative to the uniformly controlled rotation method used by Qiskit by requiring fewer CX gates when the target state has a polynomial number of non-zero amplitudes.

dynamic continuous time quantum walks↗

NASA NTRS1990

Numerical simulation of the viscous flow around a simplified F/A-18 at high angles of attack

A numerical method developed for solving the viscous flow around three-dimensional complex configurations is presently used to simulate the flow around a simplified F/A-18 configuration encompassing forebody, wing, leading-edge extension, faired-over inlet, and deflected wing leading-edge flaps, at Mach 0.243 and 30.3 deg angle of attack. The computational results show the details of the flowfield structure, including primary, secondary, and tertiary separation lines, the development of forebody and leading-edge extension vortex, and the burst of this vortex. A grid-refinement study is conducted to assess the effect of grid characteristics on solution accuracy. Substantial agreement is obtained between these results and flight data.

Rizk, Yehia M.↗

NASA NTRS1984

Analysis of entry aerodynamic heat-transfer data for the orbiter wing lower surface

Flight-derived aerodynamic heat-transfer data for the orbiter wing lower surface, from STS-2, -3, and -5, are presented and compared with both ground-based experimental results and state-of-the-art computational flowfield results for a nominal angle of attack of 40 degrees. The flight data clearly show the development of the interference heat-transfer region on the wing lower surface resulting from the downstream effects of the bow-shock/wing-shock interaction. The location of the interference heating region is well correlated with a region of minimum static enthalpy near the boundary-layer edge as predicted by a 3-dimensional, inviscid flowfield computation. The magnitude of the interference heat transfer is no greater than the undisturbed laminar heat transfer which occurs during the 'peak aerodynamic heating' portion of entry.

Throckmorton, D. A.↗

NASA NTRS1959

Investigation at Mach Numbers of 0.20 to 3.50 of a Blended Diamond Wing and Body Combination of Sonic Design but with Low Wave-Drag Increase with Increasing Mach Number

A diamond wing and body combination was designed to have an area distribution which would result in near optimum zero-lift wave-drag coefficients at a Mach number of 1.00, and decreasing wave-drag coefficient with increasing Mach number up to near sonic leading-edge conditions for the wing. The airfoil section were computed by varying their shape along with the body radii (blending process) to match the selected area distribution and the given plan form. The exposed wing section had an average maximum thickness of about 3 percent of the local chords, and the maximum thickness of the center-line chord was 5.49 percent. The wing had an aspect ratio of 2 and a leading-edge sweep of 45 deg. Test data were obtained throughout the Mach number range from 0.20 to 3.50 at Reynolds numbers based on the mean aerodynamic chord of roughly 6,000,000 to 9,000,000. The zero-lift wave-drag coefficients of the diamond model satisfied the design objectives and were equal to the low values for the Mach number 1.00 equivalent body up to the limit of the transonic tests. From the peak drag coefficient near M = 1.00 there was a gradual decrease in wave-drag coefficient up to M = 1.20. Above sonic leading-edge conditions of the wing there was a rise in the wave-drag coefficient which was attributed in part to the body contouring as well as to the wing geometry. The diamond model had good lift characteristics, in spite of the prediction from low-aspect-ratio theory that the rear half of the diamond wing would carry little lift. The experimental lift-curve slope obtained at supersonic speeds were equal to or greater than the values predicted by linear theory. Similarly the other basic aerodynamic parameters, aerodynamic center position, and maximum lift-drag ratios were satisfactorily predicted at supersonic speeds.

Holdaway, George H.↗

NASA NTRS1990

Application of a patched-grid algorithm to the F/A-18 forebody-leading-edge extension configuration

A patched-grid algorithm for the analysis of complex configurations with an implicit, upwind-biased Navier-Stokes solver is presented. Results from both a spatial-flux and a time-flux conservation approach to patching across zonal boundaries are presented. A generalized coordinate transformation with a biquadratic geometric element is used at the zonal interface in order to treat highly stretched viscous grids and arbitrarily shaped zonal boundaries. Applications are made to the F/A-18 forebody-Ieading-edge extension configuration at subsonic, high-alpha conditions. Computed surface flow patterns compare well with ground-based and flight-test results; the large effect of Reynolds number on the forebody flowfield is shown.

Leading edge extension↗

NASA NTRS1957

Some Effects of Bluntness on Boundary-Layer Transition and Heat Transfer at Supersonic Speeds

Large downstream movements of transition observed when the leading edge of a hollow cylinder or a flat plate is slightly blunted are explained in terms of the reduction in Reynolds number at the outer edge of the boundary layer due to the detached shock wave. The magnitude of this reduction is computed for cones and wedges for Mach numbers to 20. Concurrent changes in outer-edge Mach number and temperature occur in the direction that would increase the stability of the laminar boundary layer. The hypothesis is made that transition Reynolds number is substantially unchanged when a sharp leading edge or tip is blunted. This hypothesis leads to the conclusion that the downstream movement of transition is inversely proportional to the ratio of surface Reynolds number with blunted tip or leading edge to surface Reynolds number with sharp tip or leading edge. The conclusion is in good agreement with the hollow-cylinder result at Mach 3.1.

Moeckel, W E↗

DOE OSTI2020

Electronic Bottleneck Suppression in Next‐Generation Networks with Integrated Photonic Digital‐to‐Analog Converters

Digital‐to‐analog converters (DAC) are indispensable functional units in signal processing instrumentation and wide‐band telecommunication links for both civil and military applications. As photonic systems are capable of high data throughput and low latency, an increasingly found system limitation stems from the required domain crossing such as digital to analog and electronic to optical. A photonic DAC implementation, in contrast, enables a seamless signal conversion with respect to both energy efficiency and short signal delay, often requiring bulky discrete optical components and electric–optic transformation, hence introducing inefficiencies. Herein, a novel coherent parallel photonic DAC concept along with a 4‐bit experimental prototype capable of performing this DAC without optic–electric–optic domain crossing is introduced. This new paradigm guarantees a linear intensity weighting among bits when operating at high sampling rates (50 GHz), featuring an exceptional sampling efficiency (> 100 GS ) and small footprint (≈1 mm 2 ) in an 8‐bit implementation. Importantly, this photonic DAC enables seamless interfaces of next‐generation data processing hardware with high relevance in data centers, task‐specific compute accelerators such as neuromorphic engines, and network edge processing applications.

Meng, Jiawei↗

DOE OSTI2023

Mechanics of Dynamic and Deformable DNA Nanostructures

In DNA nanotechnology, DNA molecules are designed, engineered, and assembled into arbitrary-shaped architectures with predesigned functions. Static DNA assemblies often have delicate designs with structural rigidity to overcome thermal fluctuations. Dynamic structures reconfigure in response to external cues, which have been explored to create functional nanodevices for environmental sensing and other applications. However, the precise control of reconfiguration dynamics has been a challenge due partly to flexible single-stranded DNA connections between moving parts. Deformable structures are special dynamic constructs with deformation on double-stranded parts and single-stranded hinges during transformation. These structures often have better control in programmed deformation. However, related deformability and mechanics including transformation mechanisms are not well understood or documented. In this review, we summarize the development of dynamic and deformable DNA nanostructures from a mechanical perspective. We present deformation mechanisms such as single-stranded DNA hinges with lock-and-release pairs, jack edges, helicity modulation, and external loading. Theoretical and computational models are discussed for understanding their associated deformations and mechanics. We elucidate the pros and cons of each model and recommend design processes based on the models. The design guidelines should be useful for those who have limited knowledge in mechanics as well as expert DNA designers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗