Search NASA⌕ Search

SEARCH · Search NASA

Results for “high loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Quantification of Cyclic Ground Reaction Force Histories During Daily Activity in Humans

Theoretical models and experimental studies of bone remodeling suggest that bone density and structure are influenced by local cyclic skeletal tissue stress and strain histories. Estimation of long-term loading histories in humans is usually achieved by assessment of physical activity level by questionnaires, logbooks, and pedometers, since the majority of lower limb cyclic loading occurs during walking and running. These methods provide some indication of the mechanical loading history, but fail to consider the true magnitude of the lower limb skeletal forces generated by various daily activities. These techniques cannot account for individual gait characteristics, gait speed, and unpredictable high loading events that may influence bone mass significantly. We have developed portable instrumentation to measure and record the vertical component of the ground reaction force (GRFz) during normal daily activity. This equipment allows long-term quantitative monitoring of musculoskeletal loads, which in conjunction with bone mineral density assessments, promises to elucidate the relationship between skeletal stresses and bone remodeling.

Breit, G. A.↗

Complex Flow Separation Pattern on Transonic Fan Airfoils Revealed by Flow Visualization

Modern turbofan engines employ a highly loaded fan stage with transonic or low-supersonic velocities in the blade-tip region. The fan blades are often prone to flutter at off-design conditions. Flutter is a highly undesirable and dangerous self-excited mode of blade oscillations that can result in high-cycle fatigue blade failure. The origins of blade flutter are not fully understood yet. The latest view is that the blade oscillations are triggered by high-frequency changes in the extent of the partially separated area on the airfoil suction side. There is a lack of experimental data describing the separated flow characteristics of modern airfoils for transonic fans.

Lepicovsky, Jan↗

Fan Stall Flutter Flow Mechanism Studied

Modern turbofan engines employ a highly loaded fan stage with transonic or low-supersonic velocities in the blade-tip region. The fan blades are often prone to flutter at off-design conditions. Flutter is a highly undesirable and dangerous self-excited mode of blade oscillations that can result in high-cycle fatigue blade failure. The origins of blade flutter are not fully understood yet. Experimental data that can be used to clarify the origins of blade flutter in modern transonic fan designs are very limited. The Transonic Flutter Cascade Facility at the NASA Glenn Research Center was developed to experimentally study the details of flow mechanisms associated with fan flutter. The cascade airfoils are instrumented to measure high-frequency unsteady flow variations in addition to the steady flow data normally recorded in cascade tests. The test program measures the variation in surface pressure in response to the oscillation of one or more of the cascade airfoils. However, during the initial phases of the program when all airfoils were in fixed positions, conditions were found where significant time variations in the pressures near the airfoil leading edges could be observed.

Lepicovsky, Jan↗

Freestanding, heat resistant microporous film for use in energy storage devices

Preferred embodiments of a freestanding, heat resistant microporous polymer film (10) constructed for use in an energy storage device (70, 100) implements one or more of the following approaches to exhibit excellent high temperature mechanical and dimensional stability: incorporation into a porous polyolefin film of sufficiently high loading levels of inorganic or ceramic filler material (16) to maintain porosity (18) and achieve low thermal shrinkage; use of crosslinkable polyethylene to contribute to crosslinking the polymer matrix (14) in a highly inorganic material-filled polyolefin film; and heat treating or annealing of biaxially oriented, highly inorganic material-filled polyolefin film above the melting point temperature of the polymer matrix to reduce residual stress while maintaining high porosity. The freestanding, heat resistant microporous polymer film embodiments exhibit extremely low resistance, as evidenced by MacMullin numbers of less than 4.5.

25 ENERGY STORAGE↗

Scintillation Hydro-Gel for Isotopic Neutron (SHINE): Eco-Friendly Quantum Dot Neutron Detectors

The development of new neutron detectors to replace helium-3 (3He) detectors is imperative due to a worldwide shortage of 3He following the draw down in nuclear weapons production since the end of the Cold War. The United States Department of Homeland Security would like to deploy monitors for the detection of neutron emissions from shipping containers housing illicit nuclear material; however, this effort has been put on hold until new replacements for 3He detectors can be developed. Scintillation Hydro-Gel for isotopic Neutron Emitters (SHINE) is a unique, first of its kind, 6Li-loaded quantum dot gel scintillator developed at INL. By incorporating 6Li with quantum dots in a gel matrix, SHINE displays the best properties of liquid and solid scintillators without their disadvantages such as continuous filtering to keep liquids free of contaminates, slow throughput of containers, higher base component costs, ‘dead’ voids in solid scintillators, and a high loading of 6Li without compromising on light transparency. Additionally, SHINE is completely eco-friendly, a breakthrough in high-efficiency detection systems. SHINE is a unique combination of 6LiCl, a highly water-soluble compound, and InP/ZnS core/shell quantum dots, which are poured into a gel-form using cross-linking polymers. In this presentation, SHINE has been successfully tested for neutron detection and shows promise as both a replacement for current 3He neutron detectors as well as potential use in handheld, compact neutron detection units and antineutrino detection.

36 MATERIALS SCIENCE↗

Solar Energy Windows and Smart IR Switchable Building Technologies

The three building envelope functions with the largest impact on the energy usage are illumination, energy flux and energy production. In general, these three functions are addressed separately in the building design. A step change toward a zero-energy building can be achieved with a glazing system that combines these three functions and their control into a single unit. In particular, significant value could be realized if illumination into the building is dynamically controlled such that it occurs during periods of low load on the grid (e.g., morning) to augment illumination supplied by interior lights and then to have that same light diverted to PV energy production and the thermal energy rejected during periods of high load on the grid. The objective of this project is to investigate the feasibility of a glazing unit design that integrates these three key functions (illumination and energy flux control, and power production) into a single module.

14 SOLAR ENERGY↗

High psedocapacitance of MnO2 nanoparticles in graphitic disordered mesoporous carbon at high scan rates

Nanocomposites composed of MnO{sub 2} and graphitic disordered mesoporous carbon (MnO{sub 2}/C) were synthesized for high total specific capacitance and redox pseudocapacitance (C{sub MnO{sub 2}}) at high scan rates up to 200 mV s{sup -1}. High resolution transmission electron microscopy (HRTEM) with energy dispersive X-ray spectroscopy (EDX) demonstrated that MnO{sub 2} nanodomains were highly dispersed throughout the mesoporous carbon structure. According to HRTEM and X-ray diffraction (XRD), the MnO{sub 2} domains are shown to be primarily amorphous and less than 5 nm in size. For these composites in aqueous 1 M Na{sub 2}SO{sub 4} electrolyte, C{sub MnO{sub 2}} reached 500 F/g{sub MnO{sub 2}} at 2 mV s{sup -1} for 8.8 wt% MnO{sub 2}. A capacitance fade of only 20% over a 100-fold change in scan rate was observed for a high loading of 35 wt% MnO{sub 2} with a C{sub MnO{sub 2}} of 310 F/g{sub MnO{sub 2}} at the highest scan rate of 200 mV s{sup -1}. The high electronic conductivity of the graphitic 3D disordered mesoporous carbon support in conjunction with the thin MnO{sub 2} nanodomains facilitate rapid electron and ion transport offering the potential of improved high power density energy storage pseudocapacitors.

36 MATERIALS SCIENCE↗

High pseudocapacitance of MnO2 nanoparticles in graphitic disordered mesoporous carbon at high scan rates

Nanocomposites composed of MnO{sub 2} and graphitic disordered mesoporous carbon (MnO{sub 2}/C) were synthesized for high total specific capacitance and redox pseudocapacitance (C{sub MnO{sub 2}}) at high scan rates up to 200 mV s{sup -1}. High resolution transmission electron microscopy (HRTEM) with energy dispersive X-ray spectroscopy (EDX) demonstrated that MnO{sub 2} nanodomains were highly dispersed throughout the mesoporous carbon structure. According to HRTEM and X-ray diffraction (XRD), the MnO{sub 2} domains are shown to be primarily amorphous and less than 5 nm in size. For these composites in aqueous 1 M Na{sub 2}SO{sub 4} electrolyte, C{sub MnO{sub 2}} reached 500 F/g{sub MnO{sub 2}} at 2 mV s{sup -1} for 8.8 wt% MnO{sub 2}. A capacitance fade of only 20% over a 100-fold change in scan rate was observed for a high loading of 35 wt% MnO{sub 2} with a C{sub MnO{sub 2}} of 310 F/g{sub MnO{sub 2}} at the highest scan rate of 200 mV s{sup -1}. The high electronic conductivity of the graphitic 3D disordered mesoporous carbon support in conjunction with the thin MnO{sub 2} nanodomains facilitate rapid electron and ion transport offering the potential of improved high power density energy storage pseudocapacitors.

36 MATERIALS SCIENCE↗

Load sequence effects on graphite/epoxy /+, -35/2s laminates

Load sequence effects on composite material fatigue behavior are due to the difference in residual strength when fatigue occurs, or the 'boundary effect', and the 'material money effect' due to previous loads. The present model, which allows the isolation of the effects of memory from those of boundary, has been investigated through a test program for the case of /+, -35/2s graphite/epoxy laminates under high-low and low-high load sequences which generated statistical residual strength data. As predicted by the model, the memory effect is present and a good correlation is obtained between test results and the theoretical predictions for both median residual strength and the expected percentage of fatigue failures under dual loading. It is noted, however, that the statistical dispersion of the residual strength test results is much smaller than that of the static ultimate strength.

Yang, J. N.↗

Methodology and Application of HPC I/O Characterization with MPIProf and IOT

Combining the strengths of MPIProf and IOT, an efficient and systematic method is devised for I/O characterization at the per-job, per-rank, per-file and per-call levels of HPC programs running on the NASA Advanced Supercomputing Center. This method is applied to answer four I/O questions in this paper. A total of 13 MPI programs and 15 cases, ranging from 24 to 5968 ranks, are analyzed to establish the I/O landscape from answers to the four questions. Four of the 13 programs use MPI I/O and the behavior of their collective writes depends on the specific implementation of the MPI library used. The SGI MPT library, the prevailing MPI library for our systems, was found to gather small writes from a large number of ranks to perform larger writes by a small subset of collective buffering ranks. The number of collective buffering ranks invoked by MPT depends on the Lustre stripe count and the number of nodes used for the run. A demonstration of varying the stripe count to achieve double-digit speedup of one program's I/O was presented. Another program, which concurrently opens private files by all ranks and could potentially create a heavy load on the Lustre servers, was identified. The ability to systematically characterize I/O for a large number of programs running on a supercomputer, seek I/O optimization opportunity and identify programs that could cause a high load and instability on the filesystems is important for pursuing exascale in a real production environment.

Characterization↗

INFLUENCE OF ACTN3 GENE ON MUSCLE HEALTH AND PHYSICAL FITNESS TO INFORM FUTURE INTERVENTIONS IN SPACEFLIGHT MISSIONS

INTRODUCTION: Exposure to reduced gravity environments leads to diminished muscle size, strength, and endurance. Preservation of physical fitness is critical for mission essential tasks such as extravehicular activities or adaptation to changes in gravity loads. Current countermeasures to maintain ISS astronauts’ muscle mass and fitness include dedicated time for a combination of cardiovascular exercise and resistance training. Countermeasure effectiveness is monitored through VO2 max and isometric mid-thigh pulls. It is important to understand both environmental and genetic contributors to astronaut physical fitness. Multiple genes, including ACTN3, are known to correlate with exercise phenotypes and have the potential to help personalize countermeasures based on an astronaut’s genotypic makeup. TOPIC: The ACTN3 gene encodes a protein expressed only in fast-twitch muscles and correlates with sprint and power phenotypes. A common polymorphism in ACTN3 gene is R577X (rs1815739), produced by a C−to−T base substitution resulting in a nonsense mutation from arginine (R) to a premature stop codon (X) present in approximately 18% of the population. This polymorphism causes an absence of α−actinin−3 in type II muscle fibers but does not lead to a disease phenotype. The RR genotype is associated with elite athletes, especially in sprint and power sports. The XX genotype is believed to be more common in endurance athletes. The ACTN3 gene also has potential associations with training adaptation, post-exercise recovery, and exercise-associated injuries. APPLICATION: Understanding how ACTN3 and other genetic determinates of fitness phenotypes affect astronaut physical performance can inform personalized exercise and recovery prescriptions. For example, individuals with the RR or RX genotype may respond better to high-load and low repetition exercise, while XX may benefit from high repetition with low weight exercise. Since the wild-type protein may confer more resistance to muscle damage, those individuals with the RR or RX genotype may benefit from high intensity interval training for improved VO2 max, whereas those with an XX genotype may benefit from low intensity, high volume endurance activity. Additionally, omics data related to health and performance could be used as biomarkers to monitor astronaut fitness and the effectiveness of training regimens during a mission. Learning objectives: • Learn about the phenotypic effects on muscle function and fitness secondary to R577X mutation in the ACTN3 gene • Learn how mutations in the ACTN3 gene may inform future countermeasures for future spaceflight missions

Lynn K Stanwyck↗

Fabrication of highly dense isotropic Nd-Fe-B nylon bonded magnets via extrusion-based additive manufacturing [Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing]

Magnetically isotropic bonded magnets with a high loading fraction of 70 vol.% Nd-Fe-B are fabricated via an extrusion-based additive manufacturing, or 3D printing system that enables rapid production of large parts. The density of the printed magnet is ~5.2 g/cm 3 . The room temperature magnetic properties are: intrinsic coercivity H ci = 8.9 kOe (708.2 kA/m), remanence B r = 5.8 kG (0.58 T), and energy product (BH)max = 7.3 MGOe (58.1 kJ/m 3 ). The as-printed magnets are then coated with two types of polymers, both of which improve the thermal stability as revealed by flux aging loss measurements. Tensile tests performed at 25 °C and 100 °C show that the ultimate tensile stress (UTS) increases with increasing loading fraction of the magnet powder, and decreases with increasing temperature. AC magnetic susceptibility and resistivity measurements show that the 3D printed Nd-Fe-B bonded magnets exhibit extremely low eddy current loss and high resistivity. Lastly, we demonstrate the performance of the 3D printed magnets in a DC motor configuration via back electromotive force measurements.

36 MATERIALS SCIENCE↗

The effect of circumferential distortion on fan performance at two levels of blade loading

Single stage fans designed for two levels of pressure ratio or blade loading were subjected to screen-induced circumferential distortions of 90-degree extent. Both fan rotors were designed for a blade tip speed of 425 m/sec, blade solidity of 1.3 and a hub-to-tip radius ratio of 0.5. Circumferential measurements of total pressure, temperature, static pressure, and flow angle were obtained at the hub, mean and tip radii at five axial stations. Rotor loading level did not appear to have a significant influence on rotor response to distorted flow. Losses in overall pressure ratio due to distortion were most severe in the stator hub region of the more highly loaded stage. At the near stall operating condition tip and hub regions of (either) rotor demonstrated different response characteristics to the distorted flow. No effect of loading was apparent on interactions between rotor and upstream distorted flow fields.

Hartmann, M. J.↗

The effect of circumferential distortion on fan performance at two levels of blade loading

Single stage fans designed for two levels of pressure ratio or blade loading (rotor tip D-factor of 0.43 and 0.54) were subjected to screen-induced circumferential distortions of 90-degree extent. Both fan rotors were designed for a blade tip speed of 425 m/sec, blade solidity of 1.3 and a hub-to-tip radius ratio of 0.5. Circumferential measurements of total pressure, temperature, static pressure, and flow angle were obtained at the hub, mean and tip radii at five axial stations (three between the screen and rotor and behind rotor and stator blade rows). Rotor loading level did not appear to have a significant influence on rotor response to distorted flow. Losses in overall pressure ratio due to distortion were most severe in the stator hub region of the more highly loaded stage. At the near stall operating condition tip and hub regions of (either) rotor demonstrated different response characteristics to the distorted flow. No effect of loading was apparent on interactions between rotor and upstream distorted flow fields.

Hartmann, M. J.↗

The effect of circumferential distortion on fan performance at two levels of blade loading

Single stage fans designed for two levels of pressure ratio or blade loading were subjected to screen induced circumferential distortions of 90 degree extent. Both fan rotors were designed for a blade tip speed of 425 m/sec, blade solidity of 1.3 and a hub-to-tip radius ratio of 0.5. Circumferential measurements of total pressure, temperature, static pressure, and flow angle were obtained at the hub, mean and tip radii at five axial stations. Rotor loading level did not appear to have a significant influence on rotor response to distorted flow. Losses in overall pressure ratio due to distortion were most severe in the stator hub region of the more highly loaded stage. At the near stall operating condition tip and hub regions of (either) rotor demonstrated different response characteristics to the distorted flow. No effect of loading was apparent on interactions between rotor and upstream distorted flow fields.

Hartmann, M. J.↗

Shuttle active thermal control system development testing. Volume 3: Modular radiator system test data correlation with thermal model

Results are presented of an analysis which compares the performance predictions of a thermal model of a multi-panel modular radiator system with thermal vacuum test data. Comparisons between measured and predicted individual panel outlet temperatures and pressure drops and system outlet temperatures have been made over the full range of heat loads, environments and plumbing arrangements expected for the shuttle radiators. Both two sided and one sided radiation have been included. The model predictions show excellent agreement with the test data for the maximum design conditions of high load and hot environment. Predictions under minimum design conditions of low load-cold environments indicate good agreement with the measured data, but evaluation of low load predictions should consider the possibility of parallel flow instabilities due to main system freezing. Performance predictions under intermediate conditions in which the majority of the flow is not in either the main or prime system are adequate although model improvements in this area may be desired. The primary modeling objective of providing an analytical technique for performance predictions of a multi-panel radiator system under the design conditions has been met.

Phillips, M. A.↗

Combined In-Plane and Through-the-Thickness Analysis for Failure Prediction of Bolted Composite Joints

Although two-dimensional methods provide accurate predictions of contact stresses and bolt load distribution in bolted composite joints with multiple bolts, they fail to capture the effect of thickness on the strength prediction. Typically, the plies close to the interface of laminates are expected to be the most highly loaded, due to bolt deformation, and they are usually the first to fail. This study presents an analysis method to account for the variation of stresses in the thickness direction by augmenting a two-dimensional analysis with a one-dimensional through the thickness analysis. The two-dimensional in-plane solution method based on the combined complex potential and variational formulation satisfies the equilibrium equations exactly, and satisfies the boundary conditions and constraints by minimizing the total potential. Under general loading conditions, this method addresses multiple bolt configurations without requiring symmetry conditions while accounting for the contact phenomenon and the interaction among the bolts explicitly. The through-the-thickness analysis is based on the model utilizing a beam on an elastic foundation. The bolt, represented as a short beam while accounting for bending and shear deformations, rests on springs, where the spring coefficients represent the resistance of the composite laminate to bolt deformation. The combined in-plane and through-the-thickness analysis produces the bolt/hole displacement in the thickness direction, as well as the stress state in each ply. The initial ply failure predicted by applying the average stress criterion is followed by a simple progressive failure. Application of the model is demonstrated by considering single- and double-lap joints of metal plates bolted to composite laminates.

Kradinov, V.↗

Orbital Winch for High-Strength, Space-Survivable Tethers

An Orbital Winch mechanism enables high-load, multi-line tethers to be deployed and retracted without rotating the spool on which the tether is wound. To minimize damage to the tether and the wound package during retraction or deployment under load, it can incorporate a Tension Management Module that reduces the infeed tension by a factor of 15 through the use of a powered capstan with guide rollers. This design eliminates the need for rotating high-voltage electrical connections in tether systems that use propellantless electro-dynamic propulsion. It can also eliminate the need for rotating optical connections in applications where the tether contains optical fibers. This winch design was developed to deploy a 15-km-long, 15-kg high-strength Hoytether structure incorporating conductive wires as part of the MXER-1 demonstration mission concept. Two slewing rings that orbit around the tether spool, combined with translation of one of the slewing rings back and forth along the spool axis to traverse the wind point, enables the winch to wind the tether. Variations of the traverse motion of the slewing ring can accomplish level winds and conical pirn winds. By removing the non-traversing slewing ring, and adding an actuated guide arm, the winch can manage rapid, low-drag deployment of a tether off the end of a pirn-wound spool, followed by controlled retraction and rewinding, in a manner very similar to a spin-casting reel. The winch requires at least two motor driver controller units to coordinate the action of two stepper motors to accomplish tether deployment or retraction.

Hoyt, Robert↗