Search NASA⌕ Search

SEARCH · Search NASA

Results for “integrated modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Integrated Neutronics Modeling for Inertial Fusion Energy Systems: Development and Application to LD-FIRST

Lawrence Livermore National Laboratory (LLNL) is proposing a new Laser Driven Fusion Integration Research and Science Test Facility (LD-FIRST) with the goal of providing an experimental testbed for future Inertial Fusion Energy (IFE) systems. However, IFE systems require detailed and accurate multiphysics modeling to quantify material damage, thermal loading, and tritium breeding within complex chamber environments. This article presents the first step in an integrated multiphysics framework that couples meshed CAD-based geometry within Monte Carlo neutronic simulations to enable high-fidelity analysis of IFE chamber concepts, with future coupling to external codes. The neutronics workflow utilizes OpenMC and its third-party capability to use CAD-based geometries through DAGMC and tally on unstructured meshes with Libmesh to evaluate neutron transport behavior, geometric fidelity, and material performance under reactor-relevant conditions. The use of tailored tallies on unstructured meshes in this framework allows direct transfer without interpolating to CFD simulation tools. Two IFE chambers were evaluated, both conceived by LLNL: HYLIFE-II and Laser IFE (LIFE). This work produced high-fidelity conformal surface and volumetric meshes of the HYLIFE-II and LIFE chambers with mapped spatial insight into material damage, thermal loading, and tritium breeding. The HYLIFE-II model was built utilizing available resources and used as a test case to verify that the neutronics framework can handle complex geometries. The LIFE chamber CAD was provided by LLNL and was the main focus of this work. This work analyzes multiple ternary alloy breeding materials for the LIFE chamber, across different 6 Li enrichments to produce data relevant to the LD-FIRST project. This work also investigates the level of model fidelity for the LIFE chamber, and results show that inclusion of detailed first wall and coolant structures increased the predicted tritium breeding ratio (TBR) by ~30%, highlighting the sensitivity of tritium breeding and the need for a high-fidelity simulation framework for IFE chambers. These developments provide a scalable toolset for the design and optimization of next-generation IFE chambers, forming a solid foundation for future coupled multiphysics analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of relativistic electron beam production and transport in high-intensity laser interaction with a wire target by integrated LSP modeling

The results of a numerical study of high-intensity short-pulse laser interaction with wire targets are presented. Fast electron production and transport in solid density plasma is modeled using the implicit hybrid particle-in-cell code LSP [D. R. Welch et al., Phys. Plasmas 13, 063105 (2006)]. These simulations were performed with realistic target size and laser parameters and over times much longer than the laser pulse. Nonlinear interaction processes, i.e., microchanneling and density steepening, have been observed. The spectrum of the relativistic electrons produced has a reduced slope temperature compared to that predicted by ponderomotive scaling. Preformed underdense plasma has been found to bottleneck fast electrons due to the intense magnetic fields generated near the critical surface. In a thin long wire target, the overall propagation length of the fast electrons is about 160 {mu}m; however, surface fields guide a small fraction of electrons to longer distances. These results are in good agreement with the experiments and have demonstrated that the modeling of electron transport relevant to fast ignition can be pursued in an integrated manner.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integrated Multiscale Modeling for Design of Robust 3D Solid-State Lithium Batteries - FY21 Annual Report

This project is developing a multiscale, multi-physics modeling framework for probing the effects of materials microstructure and device architecture on ion transport within 3D ceramic solid-state battery materials, with the goal of enhancing performance and reliability. The project has three primary objectives: (1) integrate multi physics and multiscale model components; (2) understand interface- and microstructure-derived limitations on ion transport; and (3) derive key structure-performance relations for enabling future optimization.

25 ENERGY STORAGE↗

A multi-scale metrics approach to forest fragmentation for Strategic Environmental Impact Assessment

Forests are becoming severely fragmented as a result of land development. South Korea has responded to changing community concerns about environmental issues. The nation has developed and is extending a broad range of tools for use in environmental management. Although legally mandated environmental compliance requirements in South Korea have been implemented to predict and evaluate the impacts of land-development projects, these legal instruments are often insufficient to assess the subsequent impact of development on the surrounding forests. It is especially difficult to examine impacts on multiple (e.g., regional and local) scales in detail. Forest configuration and size, including forest fragmentation by land development, are considered on a regional scale. Moreover, forest structure and composition, including biodiversity, are considered on a local scale in the Environmental Impact Assessment process. Recently, the government amended the Environmental Impact Assessment Act, including the SEA, EIA, and small-scale EIA, to require an integrated approach. Therefore, the purpose of this study was to establish an impact assessment system that minimizes the impacts of land development using an approach that is integrated across multiple scales. This study focused on forest fragmentation due to residential development and road construction sites in selected Congestion Restraint Zones (CRZs) in the Greater Seoul Area of South Korea. Based on a review of multiple-scale impacts, this paper integrates models that assess the impacts of land development on forest ecosystems. The applicability of the integrated model for assessing impacts on forest ecosystems through the SEIA process is considered. On a regional scale, it is possible to evaluate the location and size of a land-development project by considering aspects of forest fragmentation, such as the stability of the forest structure and the degree of fragmentation. On a local scale, land-development projects should consider the distances at which impacts occur in the vicinity of the forest ecosystem, and these considerations should include the impacts on forest vegetation and bird species. Impacts can be mitigated by considering the distances at which these influences occur. In particular, this paper presents an integrated environmental impact assessment system to be applied in the SEIA process. The integrated assessment system permits the assessment of the cumulative impacts of land development on multiple scales. -- Highlights: • The model is to assess the impact of forest fragmentation across multiple scales. • The paper suggests the type of forest fragmentation on a regional scale. • The type can be used to evaluate the location and size of a land development. • The paper shows the influence distance of land development on a local scale. • The distance can be used to mitigate the impact at an EIA process.

54 ENVIRONMENTAL SCIENCES↗

A Fully Explicit Integrator for Modeling Astrophysical Reactive Flows

Simulating complex astrophysical reacting flows is computationally expensive—reactions are stiff and typically require implicit integration methods. The reaction update is often the most expensive part of a simulation, which motivates the exploration of more economical methods. In this research note, we investigate how the explicit Runge–Kutta–Chebyshev (RKC) method performs compared to an implicit method when applied to astrophysical reactive flows. These integrators are applied to simulations of X-ray bursts arising from unstable thermonuclear burning of accreted fuel on the surface of neutron stars. We show that the RKC method performs with similar accuracy to our traditional implicit integrator, but is more computationally efficient when run on CPUs.

GPU computing↗

Data Integration Aggregated Model For Nuclear Deployment

The data of a nuclear utility or plant are stored in various isolated forms in different systems. These data have different structures and tools and are, therefore, used independently. The integration of data sources is often needed and is performed manually and on an as-needed basis. The integration of the data would enable creating a data warehouse for a single nuclear power plant (NPP) or multiple plants. A data model contains objects that make up a given domain along with their attributes and relationships and could be used as a standard for exchange between applications for simple integration and data aggregation. After a survey of existing models, it was determined that a new model was required to meet the scope of this problem. DIAMOND has been developed in the form of an ontology to meet these needs. An ontology is simply a data model that also acts as a taxonomy for the domain, organizing the objects in a hierarchy with the most general objects at the top.

Browning, JerenM↗

Thermal and electric multidomain dynamic model for integration of power grid distribution with behind-the-meter devices

As renewable energy sources like solar and wind power become more integrated into the grid, coordinated control of behind-the-meter devices is crucial for enhancing grid flexibility and reliability and for meeting cost targets, with standardized models being developed to support this transition. The increasing flexibility and uncertainty of integrated renewable energy grids, along with interactions between various subsystems, make traditional steady-state modeling insufficient to capture transient and dynamic behaviors. Current models (e.g., composite load and battery equivalent models) focus on thermodynamic or electrical characteristics but overlook critical electromechanical interactions. This limits the ability to share performance information for grid services and hampers fast dynamic simulations. In addition, motor stalling is usually triggered by a fault event and attributed to the characteristics of the mechanical torque of the motor, resulting in absorption of a large amount of reactive power during the stalling period. Further, this significant withdrawal of reactive power will deteriorate the dynamic voltage stability of power grids and cause delayed voltage recovery. Therefore, an in-depth modeling of the thermodynamics or mechanical torque is essential to study the impacts of the realistic torque characteristics of those behind-the-meter devices on power system voltage stability. This study developed a dynamic multidomain model for building HVAC systems, such as air-source heat pumps, to simulate their thermal and electrical responses to grid transients. The model can accurately predict power metrics with a mean absolute percentage error of 10%, by validating against with power system computer-aided design performance data. Case studies demonstrate the model capability of capturing the transient response to sudden voltage changes, rapid load fluctuations, and system shutdowns respectively. During a sudden voltage drop (30% for 0.1s), a fully loaded heat pump’s motor speed dropped, continued declining, and shut down after 3.6s, with severe power oscillations and a torque spike. A partially loaded unit experienced temporary oscillations but stabilized. Under higher building loads, compressor speed increased from 64% to 100%, with power and torque rising before stabilizing. In safety-triggered shutdowns, power decreased after minor fluctuations, and torque briefly spiked before dropping to zero.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Characterizing forest ecosystem dynamics through modelling and remote sensing observations

To gain a better understanding of northern/boreal forest dynamics over a range of spatial and temporal scales, an approach to integrate models of forest growth, soil processes and radiative transfer with remote sensing observations was developed. The integrated model and remote sensing can be used to examine descriptors of ecosystem dynamics. To examine the scaling of vegetation pattern from the local to the regional domain, distributions of area and perimeters of vegetation community associations were determined from satellite and aircraft images. Relationships between computed fractal dimensions (1.5 to 1.8) and succession history for managed and unmanaged areas are being explored.

Ranson, K. J.↗

Multidisciplinary analyses of segmented reflector telescopes

This paper is a summary of the work presented in the video tape demonstrating the integrated modeling capabilities that exist in an analytical tool being developed at JPL called IMOS (Integrated Modeling of Advanced Optical Systems). A segmented reflector telescope, whose performance is based on structural, controls, thermal, and optical disciplines was analyzed.

Needels, Laura↗

Multidisciplinary Analysis of Segmented Reflector Telescope

This paper is a summary of the work presented in the video tape demonstrating the integrated modeling capabilities that exist in an analytical tool being developed at JPL called IMOS (Integrated Modeling of Advanced Optical Systems).

segmented↗

The Gd based Neutron Absorber for Spent Fuel Storage and Transport Cask - 17636

The criticality safety calculations were performed for integral model which has single rack wall of stainless steel added neutron absorber material. The integral model was verified by reference model composed of 3 layer; basket cell, neutron absorber and sheath. For the neutron absorber material, Gd was selected due to its high neutron absorption cross section in thermal region compared to B. The mathematical model based on validated code, KENO-Va in SCALE was used and the data library is ENDF/B-VII 238-Group. The k{sub eff} was calculated for changes in Gd and B contents in flooded condition. The Gd added stainless steel shows higher performance than B at same atomic percent and reactivity reduction decreases as absorber content increases. Therefore, the Gd 0.47 at% was selected for 'optimum Gd content' for effective use of neutron absorber. With Gd 0.47 at%, B, Sm, Er and Eu was considered for additional neutron absorber and B shows the best performance among them. The Gd 0.47 at% with B 2.05 at% was selected for (optimum neutron absorber content'. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Aerodynamic results of a separation effects test conducted in the AEDC 40 by 40 inch tunnel A facility on the Rockwell International launch configuration 3 (model-OTS) integrated vehicle (IA13), volume 1

Experimental aerodynamic investigations were conducted from July 5 through July 17, 1973, on a 0.01 scale model. The AEDC captive trajectory system was utilized in conjunction with the tunnel primary sector to obtain grid-type data for external tank abort from the orbiter, and for nominal separation of one solid rocket booster from the orbiter-tank combination. Booster separation was investigated with and without separation motors plume simulation. The plumes were generated by eight M sub j = 2.15 nozzles using a 1500 psia cold air supply. Free stream data were obtained for all models (orbiter, tank, orbiter-tank, and right-hand booster) to provide baselines for evaluation of proximity effects.

Campbell, J. H., II↗

Calculating Impacts of Energy Standards on Energy Demand in U.S. Buildings under Uncertainty with an Integrated Assessment Model: Technical Background Data

This report presents data and assumptions employed in an application of PNNL’s Global Change Assessment Model with a newly-developed Monte Carlo analysis capability. The model is used to analyze the impacts of more aggressive U.S. residential and commercial building-energy codes and equipment standards on energy consumption and energy service costs at the state level, explicitly recognizing uncertainty in technology effectiveness and cost, socioeconomics, presence or absence of carbon prices, and climate impacts on energy demand. The report provides a summary of how residential and commercial buildings are modeled, together with assumptions made for the distributions of state–level population, Gross Domestic Product (GDP) per worker, efficiency and cost of residential and commercial energy equipment by end use, and efficiency and cost of residential and commercial building shells. The cost and performance of equipment and of building shells are reported separately for current building and equipment efficiency standards and for more aggressive standards. The report also details assumptions concerning future improvements brought about by projected trends in technology.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Hydrogen Embrittlement of Structural Steels

Carbon-manganese steels are candidates for the structural materials in hydrogen gas pipelines; however, it is well known that these steels are susceptible to hydrogen embrittlement. Decades of research and industrial experience have established that hydrogen embrittlement compromises the structural integrity of steel components. This experience has also helped identify the failure modes that can operate in hydrogen containment structures. As a result, there are tangible ideas for managing hydrogen embrittlement in steels and quantifying safety margins for steel hydrogen containment structures. For example, fatigue crack growth aided by hydrogen embrittlement is a well-established failure mode for steel hydrogen containment structures subjected to pressure cycling. This pressure cycling represents one of the key differences in operating conditions between current hydrogen pipelines and those anticipated in a hydrogen delivery infrastructure. Applying structural integrity models in design codes coupled with measurement of relevant material properties allows quantification of the reliability/integrity of steel hydrogen pipelines subjected to pressure cycling. Furthermore, application of these structural integrity models is aided by the development of physics-based predictive models, which provide important insights such as the effects of microstructure on hydrogen-assisted fatigue crack growth. Successful implementation of these structural integrity and physics-based models enhances confidence in the design codes and enables decisions about materials selection and operating conditions for reliable and efficient steel hydrogen pipelines.

36 MATERIALS SCIENCE↗

Future energy system challenges for Africa: Insights from Integrated Assessment Models

Although Africa’s share in the global energy system is only small today, the ongoing population growth and economic development imply that this can change significantly. In this paper, we discuss long-term energy developments in Africa using the results of the LIMITS model inter-comparison study. The analysis focusses on the position of Africa in the wider global energy system and climate mitigation. The results show a considerable spread in model outcomes. Without specific climate policy, Africa’s share in global CO 2 emissions is projected to increase from around 1-4% today to 3-23% by 2100. In all models, emissions only start to become really significant on a global scale after 2050. Furthermore, by 2030 still around 50% of total household energy use is supplied through traditional bio-energy, in contrast to existing ambitions from international organisations to provide access to modern energy for all. After 2050, the energy mix is projected to converge towards a global average energy mix with high shares of fossil fuels and electricity use. Finally, although the continent is now a large net exporter of oil and gas, towards 2050 it most likely needs most of its resources to meet its rapidly growing domestic demand. With respect to climate policy, the rapid expansion of the industrial and the power sector also create large mitigation potential and thereby the possibility to align the investment peak in the energy system with climate policy and potential revenues from international carbon trading.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Prognostic Emissions in GEOS

Prognostic emissions enable seamless applications of atmospheric chemistry and aerosol models across scales. Prognostic emissions also facilitate direct and higher order interactions and feedbacks between components in an integrated modeling system and thus enhance the model representativeness. On the other hand they also require more attention and strict validation to ensure model integrity. In this talk I will discuss recent developments related to prognostic emissions of mineral dust, primary marine aerosols and biomass burning in the NASA GEOS model and outline some of the challenges stemming from limited ability to represent subscale and stochastic processes.

Darmenov, Anton↗