Search NASA⌕ Search

SEARCH · Search NASA

Results for “large structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Practical design of low-cost large space structures

The practical design of low-cost space structures involves the use of approaches that reduce the cost of the design and development effort itself. Such approaches include: (1) design with criteria arrived at rationally; (2) design for simplicity, repeatability, and modularity; (3) assembly without adjustments; (4) design for testability on the ground; (5) the attainment of structural efficiency by configuration and material choice rather than by squeezing down on the design margins; and (6) prefabrication and preassembly before launch. Attention is given to truss platform designs, and the Seasat Extendible Support Structure is discussed as a particular example.

Hedgepeth, J. M.↗
NASA NTRS1978

The large-scale structure of the interplanetary magnetic field between 1 and 0.3 AU during the primary mission of Helios 1

The macroscale and mesoscale structure of the interplanetary magnetic field during the primary mission of Helios 1 is discussed. The radial field component behaves essentially in agreement with Parker's theory. The transverse component shows a larger variability than the radial component; its radial variation is in good agreement with Parker's theory for high speeds, but some deviation is found for low speeds. The radial variation of the field variance is also studied. Its dependence upon the heliocentric distance r is expressed by the law 1/r cubed, which is necessary but not sufficient for Alfven waves. The available data do not allow a unique interpretation of the 1/r cubed dependence. No big differences are observed between low (less than or equal to 500 km/s) and high (greater than or equal to 600 km/s) solar wind velocity regimes.

Mariani, F.↗
NASA NTRS1980

Study of foldable elastic tubes for large space structure applications, phase 1

Structural members that might be suitable for strain energy deployable structures, are discussed with emphasis on a thin-walled cylindrical tube with a cross-section that is called 'bi-convex'. The design of bi-convex tube test specimens and their fabrication are described as well as the design and construction of a special purpose testing machine to determine the deployment characteristics. The results of the first series of tests were quite mixed, but clearly revealed that since most of the specimens failed to deploy completely, due to a buckling problem, this type of tube requires some modification in order to be viable.

Jones, I. W.↗
NASA NTRS1980

A mechanical adapter for installing mission equipment on large space structures

A mechanical attachment adapter was designed, constructed, and tested. The adapter was was included in a simulation program that investigated techniques for assembling erectable structures under simulated zero-g conditions by pressure-suited subjects in a simulated EVA mode. The adapter was utilized as an interface attachment between a simulated equipment module and one node point of a tetrahedral structural cell. The mating performance of the adapter, a self-energized mechanism, was easily and quickly demonstrated and required little effort on the part of the test subjects.

Lefever, A. E.↗
NASA NTRS1980

Introduction: The challenge of optimum integration of propulsion systems and large space structures

A functional matrix of possible propulsion system characteristics for a spacecraft for deployable and assembled spacecraft structures shows that either electric propulsion or low thrust chemical propulsion systems could provide the propulsion required. The trade-off considerations of a single propulsion engine or multiengines are outlined and it is shown that a single point engine is bounded by some upper limit of thrust for assembled spacecraft. The matrix also shows several additional functions that can be provided to the spacecraft if a propulsion system is an integral part of the spacecraft. A review of all of the functions that can be provided for a spacecraft by an integral propulsion system may result in the inclusion of the propulsion for several functions even if no single function were mandatory. Propulsion interface issues for each combination of engines are identified.

Carlisle, R. F.↗
NASA NTRS1980

Low-temperature solder for joining large cryogenic structures

Three joining methods were considered for use in fabricating cooling coils for the National Transonic Facility. After analysis and preliminary testing, soldering was chosen as the cooling coil joining technique over mechanical force fit and brazing techniques. Charpy V-Notch tests, cyclic thermal tests (ambient to 77.8 K) and tensile tests at cryogenic temperatures were performed on solder joints to evaluate their structural integrity. It was determined that low temperature solder can be used to ensure good fin-to-tube contact for cooling-coil applications.

Buckley, J. D.↗
NASA NTRS1980

System identification of large space structures

The paper deals with the problem of system identifiability for a linear dynamical system. Two theorems are given relating the sufficient condition of system identifiability for certain linear structures to the total number of inputs and outputs. The principle of least squares, that seeks the minimization of a cost function is employed to carry out the system identification process. To illustrate the concept of the paper, a structural model of a beam with point masses is examined. Parameter identification methods are studied and a random search technique is introduced.

Juang, J. N.↗
NASA NTRS1980

Adaptive and learning control of large space structures

The paper describes the adaptive learning system for space operations which assumes that structural testing can be conducted during deployment and assembly. Simulation results using the solar electric propulsion array and a novel remote sensor are presented; they involve faster scan television coverage of the motions of the array from four cameras on the corners of the Space Shuttle payload bay. The description of the simulation, the filtering algorithm for processing the TV data, the parameter extraction algorithm, and the simulation results are presented.

Montgomery, R. C.↗
NASA NTRS1981

Study of foldable elastic tubes for large space structure applications

Various modifications were made to the tube design. The tubes were retested and analyzed, and the results are presented. One type of modified tube, the slotted tube, deployed successfully and reliably, and became the focus of detailed tests. Optimal design criteria, taking into consideration deployment as well as strength and buckling behavior were established.

Jones, I. W.↗
NASA NTRS1981

Comparative evaluation operability of large space structure connectors

The evaluation of several connector concepts in the neutral buoyancy simulator is discussed. Parameters for evaluating the fasteners included subject comments and hardware damage. Evaluation results include a rank ordering of the candidates with descriptions of the acceptable and unacceptable points of each. General design recommendations established as a result of neutral buoyancy testing are defined. Recommendations include detailed hardware and operational design requirements.

Stokes, J. W.↗
NASA NTRS1981

Distributed control of large space structures

Theoretical developments and the results of laboratory experiments are treated as they apply to active attitude and vibration control, as well as static shape control. Modern control theory was employed throughout as the method for obtaining estimation and control laws.

Schaechter, D. B.↗
NASA NTRS1981

Algorithms for identification and analysis of large space structures

The identification of the mass, damping and stiffness matrix for the finite-element formulation of a structure will be given. It will be shown that the quadrature integration procedure can be used to find the desired matrices when reasonable assumptions hold. The mass, damping and stiffness matrices of the matrix polynomial are identified by the algorithm.

Denman, E. D.↗
NASA NTRS1981

Study of foldable elastic tubes for large space structure applications, phase 3

A bi-convex foldable elastic tube, suitable for use in self deploying space structures, was subjected to a series of buckling tests to deterine initial buckling loads, collapse loads, and the buckling mode. The tube is cylindrical with a cross-section that is lenticular-like with flared edges. It is capable of being flattened in the center and folded compactly, storing up strain energy in the process. Upon removal of constraint, it springs back to its original straight configuration, releasing the stored strain energy. The tests showed that this type of tube has good resistance to buckling, with the initial buckling loads all falling within or above the range of those for comparable circular cylindrical tubes.

Jones, I. W.↗
NASA NTRS1982

Vibration damping characteristics of graphite/epoxy composites for large space structures

Limited data on extensional and flexural damping of small specimens of graphite/epoxy and unreinforced epoxy resin were obtained. Flexural damping was measured using a forced vibration technique based on resonant flexural vibration of shaker excited double cantilever specimens. Extensional damping was measured by subjecting similar specimens to low frequency sinusoidal oscillation in a servohydraulic tensile testing machine while plotting load versus extensional strain. Damping was found to vary slowly and continuously over the frequency range 0.01 - 1000 Hz, and no drastic transitions were observed. Composite damping was found to be less than neat resin damping. Comparison of small specimen damping values with assembled column damping values seems to indicate that, for those materials, material damping is more important than joint damping. The data reported was limited not by the test apparatus, but by signal conditioning and data acquisition. It is believed that filtering of the strain gage signals and the use of digital storage with slow playback will make it possible to extend the frequency and amplitude ranges significantly.

Gibson, R. F.↗
NASA NTRS1982

Filter failure detection for systems with large space structure dynamics

A failure detection filter is applied to the detection of actuator and sensor failures on a free-free beam. Computer simulation tests are used to verify the filter design and study the effect of unmodeled modes on filter performance. In actuator tests, the failure signal to spillover noise ratio was found to be greatest when the filter bandwidth was 5 rad/sec beyond the input frequency. Observation spillover, however, was found to vary widely in tests run under similar conditions (same input frequency and filter poles) but with different detector gains. In sensor tests, the maximum signal-to-noise ratio for varying filter bandwidth depended upon the initial conditions placed on the unmodeled modes; the performance was good even for initial amplitudes on the first unmodeled mode 7.5% of that on the last modeled mode.

Carignan, C. R.↗
NASA NTRS1982

Research on the noise produced by large scale structure in supersonic jets

Using a dual electrode glow discharge excitation device, a method of mode selection into either the n = 0 or n = + or - 1 azimuthal modes was developed and tested by Fourier analyzing experimental azimuthal phase and amplitude data. On a M = 2.1 moderate Reynolds number (Re = 68,000) jet with a laminar boundary layer, under n = 0 or n = +1 excitation, coherent axial wave evolution, mean flow, and sound pressure level directivity measurements were performed. The boundary layer of this same jet was excited usng a grit coating on the nozzle wall, and bandpassed axial wave evolution data obtained and compared to the masurements made by previous workers on a conventional high Reynolds number jet (Re = 5,000,000) using a hot-film type probe.

Mclaughlin, D. K.↗