Search NASA⌕ Search

SEARCH · Search NASA

Results for “mapping variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Physics informed machine learning for chemistry tabulation

Modeling of turbulent combustion system requires modeling the underlying chemistry and the turbulent transport. Solving both systems simultaneously is computationally prohibitive. Instead, given the difference in scales at which the two sub-systems evolve, the two sub-systems are typically (re)solved separately. Popular approaches such as the Flamelet Generated Manifolds (FGM) use a two-step strategy where the governing reaction kinetics are pre-computed and mapped to a low-dimensional manifold, characterized by a few reaction progress variables (model reduction) and the manifold is then “looked-up” during the run-time to estimate the high-dimensional system state by the turbulent transport system. While existing works have focused on these two steps independently, in this work we show that joint learning of the progress variables and the look-up model, can yield more accurate results. Here, we build on the base formulation and implementation to include the dynamically generated Thermochemical State Variables (Lower Dimensional Dynamic Source Terms). We discuss the challenges in the implementation of this deep neural network architecture and experimentally demonstrate its superior performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-Field Whole-Plant Maize Architecture Characterized by Subcanopy Rovers and Latent Space Phenotyping

Core Ideas * Subcanopy rovers enabled 3D characterization of thousands of hybrid maize plots. * Machine learning produces heritable latent traits that describe plant architecture. * Rover-based phenotyping is far more efficient than manual phenotyping. * Latent phenotypes from rovers are ready for application to plant biology and breeding. Collecting useful, interpretable, and biologically relevant phenotypes in a resource-efficient manner is a bottleneck to plant breeding, genetic mapping, and genomic prediction. Autonomous and affordable subcanopy rovers are an efficient and scalable way to generate sensor-based datasets of in-field crop plants. Rovers equipped with lidar can produce three-dimensional reconstructions of entire hybrid maize (Zea mays L.) fields. In this study, we collected 2103 lidar scans of hybrid maize field plots and extracted phenotypic data from them by latent space phenotyping. We performed latent space phenotyping by two methods, principal component analysis and a convolutional autoencoder, to extract meaningful, quantitative latent space phenotypes (LSPs) describing whole-plant architecture and biomass distribution. The LSPs had heritabilities of up to 0.44, similar to some manually measured traits, indicating that they can be selected on or genetically mapped. Manually measured traits can be successfully predicted by using LSPs as explanatory variables in partial least squares regression, indicating that the LSPs contain biologically relevant information about plant architecture. These techniques can be used to assess crop architecture at a reduced cost and in an automated fashion for breeding, research, or extension purposes, as well as to create or inform crop growth models.

59 BASIC BIOLOGICAL SCIENCES↗

HEAO A-2 extragalactic results

Results from the HEAO A-2 experiment concerning the extragalactic X-ray sky are discussed. All-sky maps of hard X-ray sources detected are presented reflecting the temporal variability of the sources that make up the extragalactic X-ray sky. Most of the identified extragalactic objects are not clusters of galaxies but isolated galaxies. Spectra for sources representing classes of active galz galaxies, BL Lacertae objects, and N galaxies are discussed in order of luminosity.

Boldt, E. A.↗

Mapping transformations for broadband atmospheric radiation calculations

Two methods of mapping the line-by-line absorption coefficient (k) spectrum onto a new variable to produce a set of k coefficients which can be used for accurate and efficient broadband radiative transfer calculations in vertically inhomogeneous, nongray scattering atmospheres are described. These methods are intended for applications for which the less accurate correlated-k method is inadequate. These methods are tested for model atmospheres containing CO2 and H2O, with pressure in the range 0.05-0.9 bar. The results obtained differed by no more than 1 or 2 percent from the line-by-line results if the number of k coefficients was about 100 times less than the number required for the line-by-line calculation. These algorithms can be used for gas mixtures and for a variety of pressure-temperature profiles.

West, Robert↗

A search for spectral units on the Uranian satellites using color ratio images

Twenty multispectral sets of calibrated coregistered Voyager 2 images of the Uranian satellites are analyzed in order to identify spectrally distinct surface units and associate these units with specific endogenic or exogenic surface processes. Several regions on each satellite where significant spectral/compositional diversity could be expected were identified by morphologic unit mapping. All the Uranian satellites were found to exhibit some degree of spectral variability associated with bright impact craters, with the typical trend being that the bright craters and their associated ejecta deposits are less red than the remainder of the satellites by 5 to 30 percent. Oberon shows the greatest variability, followed by Titania and Ariel. Morphologic features on Miranda and Ariel possibly associated with endogenic processes such as tectonism or ice volcanism do not exhibit as high a degree of spectral variability relative to their surroundings as bright impact craters.

Bell, J. F., III↗

Studies of the net surface radiative flux from satellite radiances during FIFE

Studies of the net surface radiative flux from satellite radiances during First ISLSCP Field Experiment (FIFE) are presented. Topics covered include: radiative transfer model validation; calibration of VISSR and AVHRR solar channels; development and refinement of algorithms to estimate downward solar and terrestrial irradiances at the surface, including photosynthetically available radiation (PAR) and surface albedo; verification of these algorithms using in situ measurements; production of maps of shortwave irradiance, surface albedo, and related products; analysis of the temporal variability of shortwave irradiance over the FIFE site; development of a spectroscopy technique to estimate atmospheric total water vapor amount; and study of optimum linear combinations of visible and near-infrared reflectances for estimating the fraction of PAR absorbed by plants.

Frouin, Robert↗

Emplacement of multiple flow units on very shallow slopes, east Kawelu Planitia flow field, Venus

Lobate flows with variable radar brightness occur at several locations on Venus. Here we present preliminary mapping results for a lava flow field on the eastern side of Kawelu Planitia, centered at approximately 41 deg N, 251 deg E. Numerous individual flows of varying brightness can be traced for up to 400 km at this location. Megallan image F-MIDRP.40N251;1 contains two major flow complexes as well as a distinct minor flow field associated with a volcanic dome. The southern flow field (unit F) changes from radar dark to radar bright in a convex arc from west to east. The flow path is diverted by a ridge system (unit B) and associated N-S faulted zone (unit A) evident in the Magellan altimetry data. The 130-km-long radar-bright flow field located at 41.5 deg N and 249-250 deg E is comprised of a narrow, channeled flow (unit E) overlying an intermediate brightness flow (unit D), all of which appears to emanate from a solitary dome at 249 deg E. The southern lobe of unit E disappears under a broad leveed channel (41.3 deg N, 250.1 deg E) in unit 5, only to reappear south of the unit 5 boundary. The source of this largest flow field is not evident, but could be associated with the region of small domes west of the F-MIDRP image (centered at 41 deg N, 246 deg E). Another possible source is the fractured area south of unit C. The flow complex is clearly a conglomeration of many flow episodes, not necessarily from a single source.

Helgerud, Michael B.↗

Assimilation of Altimeter Data into a Quasigeostrophic Model of the Gulf Stream System: Dynamical Considerations - Part 1

The dynamical consequences of constraining a numerical model with sea surface height data have been investigated. The model used for this study is a quasigeostrophic model of the Gulf Stream region. The data that have been assimilated are maps of sea surface height obtained as the superposition of sea surface height variability deduced from the Geosat altimeter measurements and a mean field constructed from historical hydrographic data. The method used for assimilating the data is the nudging technique. Nudging has been implemented in such a way as to achieve a high degree of convergence of the surface model fields toward the observations. The assimilation of the surface data is thus equivalent to the prescription of a surface pressure boundary condition. The authors analyzed the mechanisms of the model adjustment and the characteristics of the resultant equilibrium state when the surface data are assimilated. Since the surface data are the superposition of a mean component and an eddy component, in order to understand the relative role of these two components in determining the characteristics of the final equilibrium state, two different experiments have been considered: in the first experiment only the climatological mean field is assimilated, while in the second experiment the total surface streamfunction field (mean plus eddies) has been used. It is shown that the model behavior in the presence of the surface data constraint can be conveniently described in terms of baroclinic Fofonoff modes. The prescribed mean component of the surface data acts as a 'surface topography' in this problem. Its presence determines a distortion of the geostrophic contours in the subsurface layers, thus constraining the mean circulation in those layers. The intensity of the mean flow is determined by the inflow/outflow conditions at the open boundaries, as well as by eddy forcing and dissipation.

Capotondi, Antonietta↗

Documenting AUTOGEN and APGEN Model Files

A computer program called "autogen hypertext map generator" satisfies a need for documenting and assisting in visualization of, and navigation through, model files used in the AUTOGEN and APGEN software mentioned in the two immediately preceding articles. This program parses autogen script files, autogen model files, PERL scripts, and apgen activity-definition files and produces a hypertext map of the files to aid in the navigation of the model. This program also provides a facility for adding notes and descriptions, beyond what is in the source model represented by the hypertext map. Further, this program provides access to a summary of the model through variable, function, sub routine, activity and resource declarations as well as providing full access to the source model and source code. The use of the tool enables easy access to the declarations and the ability to traverse routines and calls while analyzing the model.

Gladden, Roy E.↗

Human Plague Risk: Spatial-Temporal Models

This chpater reviews the use of spatial-temporal models in identifying potential risks of plague outbreaks into the human population. Using earth observations by satellites remote sensing there has been a systematic analysis and mapping of the close coupling between the vectors of the disease and climate variability. The overall result is that incidence of plague is correlated to positive El Nino/Southem Oscillation (ENSO).

Pinzon, Jorge E.↗

Evaluation of Geologic Carbon Storage Resource Estimates (SREs) of Cambrian Ordovician Units within the CarbonSAFE Prefeasibility Study Region Subtasks 4.2 and 4.3 – Topical Report

This report by the Indiana Geological & Water Survey (IGWS) assessed the storage resource estimate (SRE) of Cambrian-Ordovician stratigraphic units located within the CarbonSAFE prefeasibility area within the Illinois Basin. A comprehensive data set of wireline logs and petrophysical information was used. These data include core analysis for porosity and permeability, and existing well data including location and stratigraphic information. This report includes storage resource estimates (SREs) for four potential storage reservoirs (Upper Ordovician Trenton Limestone/Black River Group, Middle Ordovician St. Peter Sandstone, Lower Ordovician and Upper Cambrian Knox Supergroup, including a separate assessment for the lower Knox Potosi Dolomite. The resultant SREs volumes are displayed using georeferenced maps and boxplots. The latter allow for comparing data statistics (mean values and variability) between five methods employed for the SRE calculations. Differences observed in SRE results from the five methods are mainly attributable to differences in the data used for porosity in each method. ArcMap 10.5.1 software was used to portray SREs to help visualize spatial variance of estimates for each methodology, and more importantly, to highlight those areas having the greatest total storage potential estimates.

01 COAL, LIGNITE, AND PEAT↗

Simulations of the OzDES AGN reverberation mapping project

As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ~500 quasars over five years in the 30 deg 2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) and constrain the radius–luminosity (R–L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ~35–45 % of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ~1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R–L relationship parameters for Hβ, MgIIλ2798, and C IVλ1549. As a result, extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R–L parameter constraints for all broad emission lines.

79 ASTRONOMY AND ASTROPHYSICS↗

Deformation and fracture characteristics of zirconium plate produced via ultrasonic additive manufacturing

Abstract The microstructural evolution, deformation modes, and fracture mechanisms of zirconium plate produced using ultrasonic additive manufacturing (UAM) are presented. In addition to conventional tensile testing techniques, digital image correlation captured highly variable strain accumulation in specimens loaded perpendicular or parallel to the build height (Z). When tested in parallel to Z, delamination at prior foil/foil interfaces creates strain localization noticeable in strain rate maps, whereas specimens loaded perpendicular to Z illustrate conventional strain hardening until necking accelerates delamination. Although bond strengths are statistically and spatially variable, in situ electron backscattering diffraction tests illustrate the ability for grains near interfaces to accommodate strain with twinning and slip modes consistent with conventionally produced zirconium alloys. Finally, mixtures of ductile and delamination-induced fracture highlight the interface-driven failure modes of UAM zirconium plate in the as-built condition. Graphic abstract

36 MATERIALS SCIENCE↗

Implementation of a feature selection algorithm in FARM to identify important state variables and time-invariant matrices

The FARM (Feasible Actuator Range Modifier) software module is a component of the RAVEN-based FORCE framework for analysis of Integrated Energy Systems (IES). FARM aids the HERON software module in the evaluation of the optimal dispatch for the different IES components. Set-point trajectories are required to meet limits on both production variables (i.e., the variables to be optimized such as the electrical power, the hydrogen production rate, etc.) and process variables tied to the service life of equipment (e.g., steam flowrate, vessel pressure, turbine firing temperature, etc.). To evaluate the feasibility of HERON generated set-points and to do so in an acceptable time, FARM employs reduced order models to represent the dynamic behavior of the systems to be dispatched. These surrogate models take the form of a linear dynamic system with sets of Linear Parameter Varying (LPV) matrices that are mapped to the system operating space. These matrices are derived from the trajectories of system state variables and system output variables during transients. The accuracy of LPV matrices depends on the selection of state variables. In previous reports, state variables were selected by adopting a complicated workflow requiring multiple software licenses and an advanced level of user expertise. In this report, a new workflow that automates the state variable selection process is presented. It significantly reduces the frequency of user interventions and does not require multiple software licenses. Each module in the new workflow is described in detail, and the input / output examples in each step of the workflow are provided. It was demonstrated that this workflow can greatly reduce the complexity of the state variable selection process, and that the updated FARM-Gamma and FARM-Delta validators can benefit from this workflow when solving the power dispatch problem of a representative IES test case. Finally, some code improvements that can further enhance the efficiency are suggested.

42 ENGINEERING↗

Mapping Wetland and Riparian Areas to Support Rio Grande Cutthroat Trout Habitat Restoration

The Rio Grande cutthroat trout (Oncorhynchus clarki virginalis; RGCT) population has declined significantly over the last century due to habitat loss, competition, and hybridization with non-native trout species. The species currently occupies roughly 11% of its historic habitat. Conservation efforts led by government and private actors have succeeded in increasing RGCT populations since the early 2000s. State, federal, and private partners began the largest native trout restoration initiative in North America. Since 2002, these efforts have included wetland and riparian area restoration and RGCT reintroduction. Current restoration efforts focus on restoring the Costilla Creek Watershed located in Colorado and New Mexico to provide cool water temperatures, improve water quality, and maintain suitable habitat for the trout species. To guide these restoration efforts, the team conducted a rapid assessment to locate and characterize wetland and riparian areas in the Costilla Creek watershed. The team utilized NASA data from the Landsat 8 Operational Land Imager (OLI), as well as the Sentinel-2 MultiSpectral Instrument (MSI), and the Sentinel-1 Synthetic Aperture Radar (SAR) for May 2016 to October 2019. To produce probability maps of wetland presence, the team used the Software for Assisted Habitat Modeling (SAHM) incorporating predictor variables generated from topographic indices, spectral indices, and radar. The top three models (General Wetland model, Stream and Wetland Connectivity model, and Inclusive Wetland model) showed a strong ability to detect wetlands. They all had AUC values greater than 0.9 and had high overlap with wetland areas during visual assessment over high-resolution imagery. The General Wetland model output was converted into a wetland polygon dataset and polygons were classified by wetland type. The resulting maps and datasets will support partners in determining the extent of possible RGCT habitat and identifying where habitat restoration efforts may be needed.

NASA DEVELOP↗

Quantitative mapping by remote sensing of an ocean acid-waste dump

Results from quantitative analysis show that airplane remotely sensed spectral data can be used to quantify and map an acid-waste dump in terms of its particulate iron concentration. These same data, however, could not be used to map the dump in terms of total suspended solids, organic suspended solids, or inorganic suspended solids concentrations. A single-variable equation using the ratio of band 2 (440 to 490 nm) radiance to band 4 (540 to 580 nm) radiance was used to quantify the iron concentration in the acid-waste dump. The acid waste that was mapped varied in age from freshly dumped to 31/2 hr. Particulate iron concentrations in the acid waste were estimated to range up to 1.1 mg/l at a depth of 0.46 m. A classification technique was developed to identify pixels in the data set affected by sun glitter.

Ohlhorst, C. W.↗

Dislocation-position fluctuations in solid 4He as collective variables in a quantum crystal

Abstract Quantum behavior at mesoscopic length scales is of significant interest, both from a fundamental-physics standpoint, as well as in the context of technological advances. In this light, the description of collective variables comprising large numbers of atoms, but nevertheless displaying non-classical behavior, is a fundamental problem. Here, we show that an effective-Hamiltonian approach for such variables, as has been applied to describe the quantum behavior of coupled qubit/oscillator systems, can also be very useful in understanding intrinsic behavior of quantum materials. We consider lattice dislocations – naturally occurring mesoscopic line defects in crystals – in the prototypical bosonic quantum crystal, solid 4 He. For this purpose, we map fully atomistic quantum simulations onto effective one-dimensional Hamiltonians in which the collective dislocation-position variables are represented as interacting, massive quantum particles. The results provide quantitative understanding of several experimental observations in solid 4 He.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analyst variability in labeling of unsupervised classifications

Analyst variability in the labeling of unsupervised classifications is tested for Landsat 5 Thematic Mapper image products covering two test sites in southern California. The accuracy of results are tested using samples from a photo interpreted base map of the area. The significance of differences between analysts is indicated by comparing Kappa statistics derived from error matrices. Analyst variability is found to be statistically significant in most cases. Certain analysts provided consistently better results for a given study area or degree of training. This work demonstrates the potential influence of analyst bias on what would otherwise seem to be a fairly objective method and suggests that controls for this subjectivity should be factored into experimental designs.

Mcgwire, Kenneth C.↗