Search NASA⌕ Search

SEARCH · Search NASA

Results for “material types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Environmental remediation with functional aerogels and xerogels

Several different types of aerogel and/or xerogel scaffolds have been demonstrated as effective sorbents for the capture and immobilization of radionuclides in gaseous form [e.g., iodine gas or I2(g), Xe] as well as ionic form (e.g., Ce4+, Cs+, I–, IO3-, Rb+, Sr2+, 99Tc7+, and U6+). These scaffolds have unique properties, which include high specific surface areas, high pore volumes, varieties of pore sizes, and functionalities that provide methods for binding radionuclides through physisorption, chemisorption, or a combination thereof. This combination of properties and functionalities make these types of materials ideal scaffolds for use as sorbents for capturing radionuclides. The primary base materials that will be discussed in this chapter include Ag0-functionalized silica aerogels, Ag+-impregnated aluminosilicate aerogels, Ag0-functionalized aluminosilicate aerogels, metal-impregnated (non-Ag) aluminosilicate aerogels and xerogels, sulfide-based aerogels, and carbon-based aerogel composites. For the capture of I2(g), the materials reported herein show some of the highest iodine loadings ever reported for inorganic sorbents. For the capture of ionic species, these materials also show promise to be some of the next generations of materials for active radionuclide remediation. This progress report will describe how these materials are fabricated, the general properties of these materials, as well as an overview of how they have been used for different applications in environmental remediation of radionuclides.

aerogel, xerogel, iodine, radionuclide remediation↗

Piezoelectric materials used in underwater acoustic transducers

Piezoelectric materials have been used in underwater acoustic transducers for nearly a century. In this paper, we reviewed four different types of piezoelectric materials: piezoelectric ceramics, single crystals, composites, and polymers, which are widely used in underwater acoustic transducers nowadays. Piezoelectric ceramics are the most dominant material type and are used as a single-phase material or one of the end members in composites. Piezoelectric single crystals offer outstanding electromechanical response but are limited by their manufacturing cost. Piezoelectric polymers provide excellent acoustic impedance matching and transducer fabrication flexibility although their piezoelectric properties are not as good as ceramics and single crystals. Composites combined the merits of ceramics and polymers and are receiving increased attention. The typical structure and electromechanical properties of each type of materials are introduced and discussed with respect to underwater acoustic transducer applications. Their advantages and disadvantages are summarized. Some of the critical design considerations when developing underwater acoustic transducers with these materials are also touched upon.

36 MATERIALS SCIENCE↗

Neutron and X-ray powder diffraction study of skutterudite thermoelectrics

N- and p-type filled-skutterudite materials prepared for thermoelectric power generation modules were analyzed by neutron diffraction at the POWGEN beam line of the Spallation Neutron Source (SNS) and X-ray diffraction (XRD). The skutterudite powders were processed by melt spinning, followed by ball milling and annealing. The n-type material consists of Ba–Yb–Co–Sb and the p-type material consists of Di–Fe–Ni–Sb or Di–Fe–Co–Sb (Di = didymium, an alloy of Pr and Nd). Powders for prototype module fabrication from General Motors and Marlow Industries were analyzed in this study. XRD and neutron diffraction studies confirm that both the n- and p-type materials have cubic symmetry. Structural Rietveld refinements determined the lattice parameters and atomic parameters of the framework and filler atoms. The cage filling fraction was found to depend linearly on the lattice parameter, which in turn depends on the average framework atom size. Ultimately, this knowledge may allow the filling fraction of these skutterudite materials to be purposefully adjusted, thereby tuning the thermoelectric properties.

36 MATERIALS SCIENCE↗

Electrical, optical and magnetic investigations on LiNiPO{sub 4} based olivines synthesized by solution combustion technique

Highlights: • Solution combustion technique and preparation of nanocrystalline olivine materials. • Olivine type LiNiPO{sub 4} based nanocrystalline materials and characterization. • AC electrical studies on olivine type LiNi{sub 1−x}M{sub x}PO{sub 4}(M = Cu{sup 2+}/Mg{sup 2+})based materials. • Enhancement of ionic conductivity in the nanocrystalline phase of LiNiPO{sub 4} material. - Abstract: Citric acid assisted solution combustion technique is explored for synthesis of supervalent Cu{sup 2+}/Mg{sup 2+} ion doped LiNiPO{sub 4} system. XRD, FT-IR and microscopy studies confirmed the formation of a well crystallized material at low concentration of dopants. Ionic conductivity increases for lower concentrations of dopants due to the increased channel size for Li{sup +} diffusion. Owing to inherent anti-site defects, ionic conductivity decreases with increase of dopant concentration. Magnetic studies are explored for confirmation of antiferromagnetic nature of ions. Wagner polarization method is used to elucidate the negligible contribution of electrons to total conductivity.

36 MATERIALS SCIENCE↗

Lanthanide N,N'-piperazine-bis(methylenephosphonates) (Ln=La, Ce, Nd) that display flexible frameworks, reversible hydration and cation exchange

Hydrothermal syntheses of lanthanide bisphosphonate metal organic frameworks comprising the light lanthanides lanthanum, cerium and neodymium and N,N'-piperazine bis(methylenephosphonic acid) (H{sub 2}L(1) and its 2-methyl and 2,5-dimethyl derivatives (H{sub 2}L(2) and H{sub 2}L(3)) gives three new structure types. At elevated starting pH (ca. 5 and above) syntheses give 'type I' materials with all metals and acids of the study (MLnLxH{sub 2}O, M=Na, K, Cs; Ln=La, Ce, Nd; x{approx}4: KCeL(1).4H{sub 2}O, C2/c, a=23.5864(2) A, b=12.1186(2) A, c=5.6613(2) A, beta=93.040(2){sup o}). The framework of structure type I shows considerable flexibility as the ligand is changed, due mainly to rotation around the -N-CH{sub 2}- bond of the linker in response to steric considerations. Type I materials demonstrate cation exchange and dehydration and rehydration behaviour. Upon dehydration of KCeL.4H{sub 2}O, the space group changes to P2{sub 1}/n, a=21.8361(12) A, b=9.3519(4) A, c=5.5629(3) A, beta=96.560(4){sup o}, as a result of a change of the piperazine ring from chair to boat configuration. When syntheses are performed at lower pH, two other structure types crystallise. With the 'non-methyl' ligand 1, type II materials result (LnL(1)H{sub 2}L(1).4.5H{sub 2}O: Ln=La, P-1, a=5.7630(13) A, b=10.213(2) A, c=11.649(2) A, alpha=84.242(2){sup o}, beta=89.051(2){sup o}, gamma=82.876(2){sup o}) in which one half of the ligands coordinate via the piperazine nitrogen atoms. With the 2-methyl ligand, structure type III crystallises (LnHL(2).4H{sub 2}O: Ln=Nd, Ce, P2{sub 1}/c, a=5.7540(9) A, b=14.1259(18) A, c=21.156(5) A, beta=90.14(2){sup o}) due to unfavourable steric interactions of the methyl group in structure type II. - Graphical abstract: The lanthanides La, Ce and Nd give a family of metal organic frameworks based on N,N'-piperazinebismethylenephosphonate ligands: these display reversible dehydration, structural flexibility and cation exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distribution of Tritium in the Near Surface of Candidate Structural Materials for Fusion Reactors. Type 304L Stainless Steel, Inconel, Hastelloy, Eurofer-97, Oxide Dispersion-Strengthened Alloy 14YWT

Five different candidate structural materials for fusion have undergone pure tritium gas soaking at room temperature and at 310-mbar(a) pressure. The tritium uptake on the surface and in the bulk of the alloys has been analyzed using surface leaching, chemical etching, and thermal desorption. The nickel-based alloys: Inconel-X-750 and Hastelloy-X, absorbed the least amount of total tritium compared with austenitic stainless steel AISI 304L, reduced activation ferritic-martensitic (RAFM) Eurofer-97, and advanced nanoferritic alloy 14YWT. Microstructural analyses using electron backscatter diffraction (EBSD) indicate that the number of grains and mean grain size is not a dominant factor in near surface tritium uptake. The quantity of iron dissolved in the surface oxide appears to be the major factor in encouraging tritium absorption.

O'Callaghan, James↗

Thermoelectric Properties of n-type ZrNiPb-Based Half-Heuslers

Here we investigate the half-Heusler ZrNiPb as a n-type thermoelectric material. Our results show that the n-type ZrNiPb-based materials can achieve high peak power factors, ~50 μW cm –1 K –2 , by optimally tuning the carrier concentration via Bi doping. By further Sn-alloying in Pb site, we achieve a significant reduction of lattice thermal conductivity while maintaining the power factor almost unchanged and hence noticeably improve the ZT. Our work demonstrates that n-type ZrNiPb-based half-Heuslers are promising thermoelectric materials.

36 MATERIALS SCIENCE↗

Titanium nitride: A new Ohmic contact material for n-type CdS

In devices based on CdS, indium is often used to make Ohmic contacts. Since indium is scarce and expensive, suitable replacement materials need to be found. In this work, we show that sputtered titanium nitride forms an Ohmic contact with n-type CdS. The CdS films, deposited with chemical bath deposition, have a hexagonal crystal structure and are polycrystalline, mostly with a (002) texture. The thickness of the films is {approx}600 nm, and the donor density is 1.9 x 10{sup 16} cm{sup -3}. The donor density increases to 1.5 x 10{sup 17} cm{sup -3} upon annealing. The contact resistivity of sputtered TiN on CdS is found to be 4.7 {+-} 0.6 {Omega} cm{sup 2}. This value is sufficiently small to avoid large resistive losses in most CdS device applications. To demonstrate the use of TiN in a CdS device, a Au/CdS/TiN Schottky diode was constructed. The diode has a potential barrier of 0.69 V and an ideality factor of 2.2.

36 MATERIALS SCIENCE↗

2011 Radioactive Materials Usage Survey for Unmonitored Point Sources

This report provides the results of the 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources (RMUS), which was updated by the Environmental Protection (ENV) Division's Environmental Stewardship (ES) at Los Alamos National Laboratory (LANL). ES classifies LANL emission sources into one of four Tiers, based on the potential effective dose equivalent (PEDE) calculated for each point source. Detailed descriptions of these tiers are provided in Section 3. The usage survey is conducted annually; in odd-numbered years the survey addresses all monitored and unmonitored point sources and in even-numbered years it addresses all Tier III and various selected other sources. This graded approach was designed to ensure that the appropriate emphasis is placed on point sources that have higher potential emissions to the environment. For calendar year (CY) 2011, ES has divided the usage survey into two distinct reports, one covering the monitored point sources (to be completed later this year) and this report covering all unmonitored point sources. This usage survey includes the following release points: • all unmonitored sources identified in the 2010 usage survey, • any new release points identified through the new project review (NPR) process, and • other release points as designated by the Rad-NESHAP Team Leader. Data for all unmonitored point sources at LANL is stored in the survey files at ES. LANL uses this survey data to help demonstrate compliance with Clean Air Act radioactive air emissions regulations (40 CFR 61, Subpart H). The remainder of this introduction provides a brief description of the information contained in each section. Section 2 of this report describes the methods that were employed for gathering usage survey data and for calculating usage, emissions, and dose for these point sources. It also references the appropriate ES procedures for further information. Section 3 describes the RMUS and explains how the survey results are organized. The RMUS Interview Form with the attached RMUS Process Form(s) provides the radioactive materials survey data by technical area (TA) and building number. The survey data for each release point includes information such as: exhaust stack identification number, room number, radioactive material source type (i.e., potential source or future potential source of air emissions), radionuclide, usage (in curies) and usage basis, physical state (gas, liquid, particulate, solid, or custom), release fraction (from Appendix D to 40 CFR 61, Subpart H), and process descriptions. In addition, the interview form also calculates emissions (in curies), lists mrem/Ci factors, calculates PEDEs, and states the location of the critical receptor for that release point. [The critical receptor is the maximum exposed off-site member of the public, specific to each individual facility.] Each of these data fields is described in this section. The Tier classification of release points, which was first introduced with the 1999 usage survey, is also described in detail in this section. Section 4 includes a brief discussion of the dose estimate methodology, and includes a discussion of several release points of particular interest in the CY 2011 usage survey report. It also includes a table of the calculated PEDEs for each release point at its critical receptor. Section 5 describes ES's approach to Quality Assurance (QA) for the usage survey. Satisfactory completion of the survey requires that team members responsible for Rad-NESHAP (National Emissions Standard for Hazardous Air Pollutants) compliance accurately collect and process several types of information, including radioactive materials usage data, process information, and supporting information. They must also perform and document the QA reviews outlined in Section 5.2.6 (Process Verification and Peer Review) of ES-RN, 'Quality Assurance Project Plan for the Rad-NESHAP Compliance Project' to verify that all information is complete and correct.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Aircraft surface coatings study: Energy efficient transport program

Surface coating materials for application on transport type aircraft to reduce drag, were investigated. The investigation included two basic types of materials: spray on coatings and adhesively bonded films. A cost/benefits analysis was performed, and recommendations were made for future work toward the application of this technology.

Source record↗

LDR segmented mirror technology assessment study

In the mid-1990s, NASA plans to orbit a giant telescope, whose aperture may be as great as 30 meters, for infrared and sub-millimeter astronomy. Its primary mirror will be deployed or assembled in orbit from a mosaic of possibly hundreds of mirror segments. Each segment must be shaped to precise curvature tolerances so that diffraction-limited performance will be achieved at 30 micron (nominal operating wavelength). All panels must lie within 1 micron on a theoretical surface described by the optical precipitation of the telescope's primary mirror. To attain diffraction-limited performance, the issues of alignment and/or position sensing, position control of micron tolerances, and structural, thermal, and mechanical considerations for stowing, deploying, and erecting the reflector must be resolved. Radius of curvature precision influences panel size, shape, material, and type of construction. Two superior material choices emerged: fused quartz (sufficiently homogeneous with respect to thermal expansivity to permit a thin shell substrate to be drape molded between graphite dies to a precise enough off-axis asphere for optical finishing on the as-received a segment) and a Pyrex or Duran (less expensive than quartz and formable at lower temperatures). The optimal reflector panel size is between 1-1/2 and 2 meters. Making one, two-meter mirror every two weeks requires new approaches to manufacturing off-axis parabolic or aspheric segments (drape molding on precision dies and subsequent finishing on a nonrotationally symmetric dependent machine). Proof-of-concept developmental programs were identified to prove the feasibility of the materials and manufacturing ideas.

Krim, M.↗

Advanced radiator concepts utilizing honeycomb panel heat pipes (stainless steel)

The feasibility of fabricating and processing moderate temperature range heat pipes in a low mass honeycomb sandwich panel configuration for highly efficient radiator fins for the NASA space station was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts were evaluated within constraints dictated by existing manufacturing technology and equipment. Concepts evaluated include: type of material, material and panel thicknesses, wick type and manufacturability, liquid and vapor communication among honeycomb cells, and liquid flow return from condenser to evaporator facesheet areas. In addition, the overall performance of the honeycomb panel heat pipe was evaluated analytically.

Fleischman, G. L.↗

Advanced radiator concepts utilizing honeycomb panel heat pipes

The feasibility of fabricating and processing moderate temperature range vapor chamber type heat pipes in a low mass honeycomb panel configuration for highly efficient radiator fins for potential use on the space station was investigated. A variety of honeycomb panel facesheet and core-ribbon wick concepts were evaluated within constraints dictated by existing manufacturing technology and equipment. Concepts evaluated include type of material, material and panel thickness, wick type and manufacturability, liquid and vapor communication among honeycomb cells, and liquid flow return from condenser to evaporator facesheet areas. A thin-wall all-welded stainless steel design with methanol as the working fluid was the initial prototype unit. It was found that an aluminum panel could not be fabricated in the same manner as a stainless steel panel due to diffusion bonding and resistance welding considerations. Therefore, a formed and welded design was developed. The prototype consists of ten panels welded together into a large panel 122 by 24 by 0.15 in., with a heat rejection capability of 1000 watts and a fin efficiency of essentially 1.0.

Fleischman, G. L.↗

Process modeling for carbon-phenolic nozzle materials

A thermochemical model based on the SINDA heat transfer program is developed for carbon-phenolic nozzle material processes. The model can be used to optimize cure cycles and to predict material properties based on the types of materials and the process by which these materials are used to make nozzle components. Chemical kinetic constants for Fiberite MX4926 were determined so that optimization of cure cycles for the current Space Shuttle Solid Rocket Motor nozzle rings can be determined.

Letson, Mischell A.↗

Electron Microscopy and Image Analysis for Selected Materials

This particular project was completed in collaboration with the metallurgical diagnostics facility. The objective of this research had four major components. First, we required training in the operation of the environmental scanning electron microscope (ESEM) for imaging of selected materials including biological specimens. The types of materials range from cyanobacteria and diatoms to cloth, metals, sand, composites and other materials. Second, to obtain training in surface elemental analysis technology using energy dispersive x-ray (EDX) analysis, and in the preparation of x-ray maps of these same materials. Third, to provide training for the staff of the metallurgical diagnostics and failure analysis team in the area of image processing and image analysis technology using NIH Image software. Finally, we were to assist in the sample preparation, observing, imaging, and elemental analysis for Mr. Richard Hoover, one of NASA MSFC's solar physicists and Marshall's principal scientist for the agency-wide virtual Astrobiology Institute. These materials have been collected from various places around the world including the Fox Tunnel in Alaska, Siberia, Antarctica, ice core samples from near Lake Vostoc, thermal vents in the ocean floor, hot springs and many others. We were successful in our efforts to obtain high quality, high resolution images of various materials including selected biological ones. Surface analyses (EDX) and x-ray maps were easily prepared with this technology. We also discovered and used some applications for NIH Image software in the metallurgical diagnostics facility.

Williams, George↗

Accurate determination of specific heat at high temperatures using the flash diffusivity method

The flash diffusivity method of Parker et al. (1961) was used to measure accurately the specific heat of test samples simultaneously with thermal diffusivity, thus obtaining the thermal conductivity of these materials directly. The accuracy of data obtained on two types of materials (n-type silicon-germanium alloys and niobium), was + or - 3 percent. It is shown that the method is applicable up to at least 1300 K.

Vandersande, J. W.↗

Engineering report. Part 2: NASA wheel and brake material tradeoff study for space shuttle type environmental requirements

The study included material selection and trade-off for the structural components of the wheel and brake optimizing weight vs cost and feasibility for the space shuttle type application. Analytical methods were used to determine section thickness for various materials, and a table was constructed showing weight vs. cost trade-off. The wheel and brake were further optimized by considering design philosophies that deviate from standard aircraft specifications, and designs that best utilize the materials being considered.

Bok, L. D.↗