Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobility models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Contaminant Migration Modeling to Support the In Situ Decommissioning of Hardened Nuclear Facilities - 20215

The decommissioning of hardened nuclear facilities provides a unique challenge in balancing current worker dose with exposure to future receptors and media. In situ decommissioning (ISD) is a cost-effective and safe option for the closure of such facilities but requires a detailed understanding of the threat that radioactive and hazardous constituents remaining in the facilities pose to groundwater and surrounding surface water. The Savannah River Site (SRS) extensively employs contaminant migration models within the decommissioning process to develop site-specific removal, grouting, and monitoring strategies in support of safe and effective final end states of nuclear facilities. This work discusses the use of contaminant migration modeling in the ISD process at SRS, including specific examples from the closure of P-Reactor and R-Reactor, Building 235-F, F-Canyon and F/H Laboratory Complex. Migration models developed during the closure of P-Reactor and R-Reactor were divided into four source areas: the reactor vessel, the process area, the disassembly basin, and the purification wing. Each source area was assigned a specific inventory and migration pathway and was then subject to varying hypothetical removal, capping, and grouting schemes. Modeling indicated that groundwater Maximum Concentration Limits (MCLs) might be exceeded if no action was taken for eleven and ten constituents of concern (COCs) at P-Reactor and R-Reactor, respectively. These exceedances could occur in as few as 200 to 500 years. Alternatively, the migration modeling demonstrated that the selected ISD actions reduced contaminant mobility which allowed for significant radioactive decay and resulted in fewer predicted exceedances of groundwater MCLs (five COCs for P-Reactor; eight COCs for R-Reactor). In response to the modeling results for P-Reactor and R-Reactor, effectiveness monitoring programs were developed to target contaminants, specific to each reactor, that may migrate to groundwater. Contaminant migration modeling also revealed that roof collapse was a large factor in the release of COCs to the environment, giving rise to roof improvements, and an inspection and vegetation control program to ensure roof stability over time. Contaminant migration modeling is also aiding in the closure planning for hardened facilities in F Area. Building 235-F housed the Actinide Billet Line, which produced Np-237 billets for irradiation in SRS reactors, and the Plutonium Fuel Form (PuFF) facility that produced Pu-238 heat sources for the space program. As a result of these missions, areas within Building 235-F contain considerable residual amounts of both Pu-238 and Np-237. Contaminant migration modeling of Building 235-F was originally performed in 2012 to identify the feasibility of ISD and the amount of radioactive material removal required to prevent the exceedance of groundwater MCLs. The original model indicated that a 60% reduction in the PuFF facility Pu-238 inventory could keep groundwater concentrations below standards, while Np-237 did not pose a threat to groundwater. However, updates to the model with an emphasis on source impact pathways revealed that, due to the orientation of the source areas relative to groundwater flow, no amount of reasonable removal of Pu-238 would keep groundwater concentrations below MCLs and that Np-237 could be a large contributor to localized MCL exceedances. With this insight, the refined 2019 model is being used to assist in the development of grouting plans specific to each facility source area, where bentonite may be utilized to slow the migration of Pu-238 and its daughter products from the PuFF facility and a reducing grout may decrease Np-237 transport by ensuring the nuclide remains in the less mobile +IV oxidation state. The beginning phases of contaminant migration modeling are underway for F-Canyon and associated facilities using lessons learned from the Reactors and Building 235-F. A contaminant migration pathway, similar to the pathway used for the reactor vessels, is being developed for the hot and warm canyons. The F-Canyon inventories are being spatially refined to identify specific and localized source zones, comparable to Building 235-F, that may impact groundwater. Contaminant migration modeling provides vital input within the ISD process, from facility investigation to post closure effectiveness monitoring, making it a valuable tool in the development of safe and effective end states for hardened nuclear facilities at SRS. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

RMIT AR Android Application Abstract

This summer, I've worked as an intern for IT-C1's Rapid Model Import Tool (RMIT) project under Bill Little. The goal of this project was to develop a mobile application for IT-C1's larger project, RMIT, so that it could be deployed in a convenient way. The current function of RMIT is to import file types that are not normally compatible with the Unity 3D software development engine and make them into files that can be placed into Unity for the specific purpose of viewing CAD models in virtual reality (VR). The mobile application that I worked on uses augmented reality (AR), using the camera on a mobile device, to show virtual models in the real world for the purpose of visualization and understanding. In addition to single-player capabilities, this application will include a multi-player mode so that collaborating engineers can see each other's work on their own devices.Working on this application required many steps. First, I hard to learn a lot about how mobile development is different from desktop development, and what the limitations of augmented reality are at its current state. From there, I was assigned new tasks and goals every two weeks, which included addingground plane and air plane functionality, designing a user interface, adding multi-player capability and allowing the user to manipulate models placed in a scene.

Dorian Thompson↗

Advanced Computing, Data Science, and Artificial Intelligence Research Opportunities for Energy-Focused Transportation Science

The Energy Efficient Mobility Systems (EEMS) technology landscape is complex and rapidly evolving, which provides both tremendous opportunities and formidable challenges. Significant alterations to the mobility landscape are underway due to the advent of vehicle and infrastructure connectivity, autonomous driving, and rapid passenger- and freight-vehicle electrification. Advanced computing will play an increasingly important role in enabling the EEMS program to understand and identify the most important levers to improve the energy productivity of future integrated mobility systems. It is also driving new approaches to mobility and the research to unlock an affordable, efficient, safe, and accessible transportation future. Driving much of this change is the collection, analysis, and strategic use of massive amounts of diverse, complex data from infrastructure and vehicles with on-board sensors and data storage and transmission capabilities. Diverse and representative data are key to implementing approaches to maximize mobility energy productivity. While high-fidelity modeling of integrated transportation networks has strengthened our understanding of dynamic movement and behavior patterns, existing tools must be expanded beyond their current focus. This work necessitates data infrastructure investments (e.g., secure-streaming data platforms driven by ubiquitous sensors and video analytics) as well as investments in critical capabilities for large-scale automated analysis and organization using modern machine learning, statistics, and artificial intelligence. Other chief needs include agile, large-scale storage that can be quickly searched and queried for relevant data to support validation and model development, data-sharing agreements, and formatting standards for key data types. The future of public transit must be explored in greater detail, research must inform design, and opportunities must be identified for improving the mobility productivity of public transit in both urban and rural America.

33 ADVANCED PROPULSION SYSTEMS↗

Static and dynamic double-exchange effects in doped manganites

It is shown that antiferromagnetic ordering in doped manganites with strong double-exchange interaction is transformed into ferromagnetic canted ordering with residual antiferromagnetic behavior in the basal plane as a result of hopping of mobile electron. The canting angle between the core magnetiztions is controlled by the competition of the Heisenberg antiferromagnetic exchange and double exchange. The temperatures of the paramagnet-antiferromagnet and paramagnet-canted ferromagnetic phase transitions are calculated. The results on the dependence of the magnetization in the canted phase and critical temperatures on the doping degree are in qualitative agreement with experiment. The form of uniform oscillations of core magnetiztions in the canted ferromagnetic phase of a doped manganite sample with hopping conduction is analyzed with and without allowance for relaxation of mobile electrons to the lattice. We propose a mechanism for the ferromagnetic resonance broadening and its resonance frequency shift in a ferromagnetic conducting sample (hopping conduction) of doped manganite due to double exchange. The resonance frequency shift and the ferromagnetic resonance damping constant (linewidth) are calculated in this model. In contrast to other relaxation mechanisms, the model is based on the fact that mobile electrons rapidly relax to the lattice (over a time on the order of the precession period).

36 MATERIALS SCIENCE↗

EV Charging Algorithm Implementation with User Price Preference

in this paper, we propose and implement a smart Electric Vehicle (EV) charging algorithm to control the EV charging infrastructures according to users’ price preferences. EVSE (Electric Vehicle Supply Equipment), equipped with bidirectional communication devices and smart meters, can be remotely monitored by the proposed charging algorithm applied to EV control center and mobile app. On the server side, ARIMA model is utilized to fit historical charging load data and perform day-ahead prediction. A pricing strategy with energy bidding policy is proposed and implemented to generate a charging price list to be broadcasted to EV users through mobile app. On the user side, EV drivers can submit their price preferences and daily travel schedules to negotiate with Control Center to consume the expected energy and minimize charging cost simultaneously. The proposed algorithm is tested and validated through the experimental implementations in UCLA parking lots.

Wang, Bin↗

Effects of twin boundary mobility on domain microstructure evolution in magnetic shape memory alloys: Phase field simulation

Effects of twin boundary mobility on domain microstructure evolution during magnetic field-induced deformation in magnetic shape memory alloys are studied by phase field micromagnetic microelastic modeling. The simulations show that different twin boundary mobilities lead to drastically different domain microstructures and evolution pathways, yielding very different magnetization and strain responses, even with opposite signs. The study also reveals complex domain phenomena in magnetic shape memory alloys.

36 MATERIALS SCIENCE↗

Preliminary Results of a U.S. Deep South Warm Season Deep Convective Initiation Modeling Experiment using NASA SPoRT Initialization Datasets for Operational National Weather Service Local Model Runs

The initiation of deep convection during the warm season is a forecast challenge in the relative high instability and low wind shear environment of the U.S. Deep South. Despite improved knowledge of the character of well known mesoscale features such as local sea-, bay- and land-breezes, observations show the evolution of these features fall well short in fully describing the location of first initiates. A joint collaborative modeling effort among the NWS offices in Mobile, AL, and Houston, TX, and NASA s Short-term Prediction Research and Transition (SPoRT) Center was undertaken during the 2012 warm season to examine the impact of certain NASA produced products on the Weather Research and Forecasting Environmental Modeling System. The NASA products were: a 4-km Land Information System data, a 1-km sea surface temperature analysis, and a 4-km greenness vegetation fraction analysis. Similar domains were established over the southeast Texas and Alabama coastlines, each with a 9 km outer grid spacing and a 3 km inner nest spacing. The model was run at each NWS office once per day out to 24 hours from 0600 UTC, using the NCEP Global Forecast System for initial and boundary conditions. Control runs without the NASA products were made at the NASA SPoRT Center. The NCAR Model Evaluation Tools verification package was used to evaluate both the forecast timing and location of the first initiates, with a focus on the impacts of the NASA products on the model forecasts. Select case studies will be presented to highlight the influence of the products.

Medlin, Jeffrey M.↗

A model of hollow cathode plasma chemistry

We have developed a new model of hollow cathode plasma chemistry based on the observation that xenon ion mobility is diffusion limited due to resonant charge exchange reactions. The model shows that vapor phase barium atoms are ionized almost immediately and electric fields accelerate the ions upstream from the emission zone. We have also applied the model to the orifice region, where the resultant ion generation profile correlates with previously reported orifice erosion.

hollow cathode↗

Probe measurements and numerical model predictions of evolving size distributions in premixed flames

Particle size distributions (PSDs), measured with a dilution probe and a Differential Mobility Analyzer (DMA), and numerical predictions of these PSDs, based on a model that includes only coagulation or alternatively inception and coagulation, are compared to investigate particle growth processes and possible sampling artifacts in the post-flame region of a C/O = 0.65 premixed laminar ethylene-air flame. Inputs to the numerical model are the PSD measured early in the flame (the initial condition for the aerosol population) and the temperature profile measured along the flame's axial centerline. The measured PSDs are initially unimodal, with a modal mobility diameter of 2.2 nm, and become bimodal later in the post-flame region. The smaller mode is best predicted with a size-dependent coagulation model, which allows some fraction of the smallest particles to escape collisions without resulting in coalescence or coagulation through the size-dependent coagulation efficiency ({gamma}{sub SD}). Instead, when {gamma} = 1 and the coagulation rate is equal to the collision rate for all particles regardless of their size, the coagulation model significantly under predicts the number concentration of both modes and over predicts the size of the largest particles in the distribution compared to the measured size distributions at various heights above the burner. The coagulation ({gamma}{sub SD}) model alone is unable to reproduce well the larger particle mode (mode II). Combining persistent nucleation with size-dependent coagulation brings the predicted PSDs to within experimental error of the measurements, which seems to suggest that surface growth processes are relatively insignificant in these flames. Shifting measured PSDs a few mm closer to the burner surface, generally adopted to correct for probe perturbations, does not produce a better matching between the experimental and the numerical results. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding ERE and iVOC Metrics for Graded CdSeTe Absorbers

PL-based external radiative efficiency (ERE) and implied open-circuit voltage (iVOC) metrics were introduced for thin-film solar absorbers to better understand the voltage deficit and diagnose losses in solar cells. Traditionally, elevated ERE and iVOC measurements are associated with diminished recombination within the solar device, a rationale heavily reliant on the assumption of a uniform bandgap and high carrier mobilities in the absorber. Recently, very low mobilities in CdSeTe absorbers (< 1 cm2/(V.s)) were measured using the light-induced transient grading technique. In this study, we use a detailed numerical model of iVOC to investigate the possible reasons of elevated iVOC in realistic CdSeTe absorbers with a graded Se profile. In particular, we examine how the bandgap nonuniformity and the reduced hole mobility in graded CdSeTe absorbers affect iVOC measurements. We show that high iVOC may result from inflated quasi-Fermi level splitting in the high-Se region in the front part of a CdSeTe absorber with slow hole transport. We reproduce the experimentally reported 360 mV increase in iVOC-VOC gap with reduced doping using a model with sub-1 cm2/(V.s) hole mobility in the high-Se region. Based on our results, we conclude that the iVOC metric (or ERE metric) should not be used as a sole metric of CdSeTe absorber quality. We discuss possible ways to extract useful information from the iVOC-VOC gap by supplementing the front-side illumination measurements with back-side illumination measurements.

14 SOLAR ENERGY↗

Comparison of Peptide Ion Conformers Arising from Non-Helical and Helical Peptides Using Ion Mobility Spectrometry and Gas-Phase Hydrogen/Deuterium Exchange

The dominant gas-phase conformer of [M+3H]{sup 3+} ions of the model peptide acetyl-PSSSSKSSSSKSSSSKSSSSK has been examined with ion mobility spectrometry (IMS), gas-phase hydrogen deuterium exchange (HDX), and mass spectrometry (MS) techniques. The [M+3H]{sup 3+} peptide ions are observed predominantly as a relatively compact conformer type. Upon subjecting these ions to electron transfer dissociation (ETD), the level of protection for each amino acid residue in the peptide sequence is assessed. The overall per-residue deuterium uptake is observed to be relatively more efficient for the neutral residues than for the model peptide acetyl-PAAAAKAAAAKAAAAKAAAAK. In comparison, the N-terminal and C-terminal regions of the serine peptide show greater relative protection compared with interior residues. Molecular dynamics (MD) simulations have been used to generate candidate structures for collision cross section and HDX reactivity matching. Hydrogen accessibility scoring (HAS) for select structural candidates from MD simulations has been used to suggest conformer types that could contribute to the observed HDX patterns. The results are discussed with respect to recent studies employing extensive MD simulations of gas-phase structure establishment of a peptide system. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unexpected Giant Microwave Conductivity in a Nominally Silent BiFeO 3 Domain Wall

Nanoelectronic devices based on ferroelectric domain walls (DWs), such as memories, transistors, and rectifiers, have been shown in recent years. Practical high-speed electronics, on the other hand, usually demand operation frequencies in the gigahertz (GHz) regime, where the effect of dipolar oscillation is important. Herein, an unexpected giant GHz conductivity on the order of 10 3 S m -1 is observed in certain BiFeO 3 DWs, which is about 100 000 times greater than the carrier-induced direct current (dc) conductivity of the same walls. Surprisingly, the nominal configuration of the DWs precludes the alternating current (ac) conduction under an excitation electric field perpendicular to the surface. Theoretical analysis reflects that the inclined DWs are stressed asymmetrically near the film surface, whereas the vertical walls in a control sample are not. The resultant imbalanced polarization profile can then couple to the out-of-plane microwave fields and induce power dissipation, which is confirmed by the phase-field modeling. Since the contributions from mobile-carrier conduction and bound-charge oscillation to the ac conductivity are equivalent in a microwave circuit, the research on local structural dynamics may open a new avenue to implement DW nano-devices for radio-frequency applications.

36 MATERIALS SCIENCE↗

Effect of differently oriented interlayer phases on the radiation damage of Inconel-$\mathrm{Ni}$ multimetallic layered composite

Multimetallic layered composites (MMLCs) have shown an excellent potential for application under extreme environments, e.g., accident-tolerant fuel cladding, because of their low oxidation tendency and high corrosion resistance. Interfacial phases or complexions in nanocrystalline materials accelerate the annihilation of defects and enhance the radiation resistance of materials, making MMLCs with engineered interlayer phases compelling to deploy in extreme conditions. However, implementation of MMLCs in full capacity remained a challenge due to a lack of fundamental understanding of the underlying mechanisms governing the characteristics of the interface between the metallic layers. The precise role of interlayer phases in MMLCs and their interaction with defects, specifically under extreme conditions, is still unexplored. Pursuing atomistic simulations for various Inconel-Ni MMLCs model materials, we revealed accelerated defect mobility in interlayers with larger crystalline misorientation and the inverse relationship between the interface sink strength to the misorientation angle. Furthermore, we found a linear relation between interlayer misorientation angle with the density of radiation-induced defects and radiation enhanced displacements. So, our results indicate that radiation-induced material degradation is accelerated by the higher defect formation tendency of MMLCs with a high-angle interlayer interface.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ride-hailing and taxi versus walking: Long term forecasts and implications from large-scale behavioral data

Introduction: Although ride-hailing and taxi trips can potentially reduce single-occupant vehicle trips and auto ownership, they can also replace pedestrian trips. Because physical activity is associated with improved health outcomes, the extent to which ride-hailing and taxi travel captures walking's mode share is of interest to policymakers. Methods: Based on large-scale behavioral data from the 2017 U.S. National Household Travel Survey, this paper reports on the development of a full Bayesian logistic regression model for determining the mode split between (1) ride-hailing and taxi and (2) walk while accounting for unobserved heterogeneity. The results from the stand-alone model inform two longer-term travel forecasting scenarios: a) higher risk of walk trips converting to ride-hailing and taxi, specifically in the future with high prevalence of automated vehicles, b) higher probability of such trips remaining as walking. Results: The results revealed that some of the important characteristics that increase the likelihood of a traveler using the ride-hailing and taxi mode versus walking include having a longer trip, using a smartphone to access the internet, having an interest in technologies, having a medical condition, and living in a metropolitan area with rail access. Further, the results from the first scenario suggest that an overall increase of up to 2.9% in the ride-hailing and taxi mode share may be expected. The second scenario shows that between 68% and 76% of ride-hailing and taxi trips could be diverted to walking if supportive pedestrian infrastructure were provided in the case study locations. The planning process can be adapted to consider not only congestion, crash, and emissions impacts of such shifts but also the effects of a loss of physical activity. Conclusions: The study findings show how the ride-hailing and taxi mode competes with walking. Further, the findings enable planners to update their regional travel forecasting models; policy makers can thus encourage active travel by prioritizing pedestrian infrastructure investments that may divert ride-hailing and taxi trips to walking. However, equity should be a key consideration to ensure that addressing the competition between these two modal choices does not hinder the provision of pedestrian facilities in communities that depend on walking.

99 GENERAL AND MISCELLANEOUS↗

Anomalously Large Seebeck Coefficient of CuFeS 2 Derives from Large Asymmetry in the Energy Dependence of Carrier Relaxation Time

The Seebeck effect in a material originates from the distribution of asymmetry in the electron transport under a temperature gradient, which has contributions from the energy-dependent electronic density-of-states and carrier mobility. However, because the energy dependence of common electron scattering mechanisms is weak, the mobility-driven Seebeck coefficient has long been ignored in most thermoelectric materials, and the energy asymmetry of the density-of-states has been considered the dominant contribution. In this work, we describe a hopping transport behavior observed in CuFeS 2 , and a large carrier Hall mobility gradient of dμH/dT that creates an unusually large energy-dependent mobility contribution to the Seebeck coefficient. This work offers several ideas regarding the mobility-driven Seebeck effect and its potential utilization in the design of thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A study of the turning points of a nems shuttle using td-scc-dftb

Nanoelectromechanical systems, of which the shuttle is one of the most fundamental, have theoretically been described mainly with phenomenological models with simplified interactions between the mobile part and the electrodes. Many microscopic methods, which in principle can give a more realistic picture of the shuttling process, are poorly suited for the dynamic non-equilibrium problem at hand. This is primarily due to the presence of several timescales associated with the mechanical motion, electronic relaxation within subsystems, and charge transfer between the mobile shuttle and the electrodes. The last timescale varies by many orders of magnitude during a shuttling cycle, which complicates many of the standard approaches. To overcome these difficulties, we use a TD-SCC-DFTB code developed in the Fraunhofer Institute for Mechanics of Materials (IWM) in Freiburg. The method, which is a well-tested approximation to TDDFT, couples the reliability of DFT with the efficiency of the TB approach.

39↗

Magnetic instability in a dilute circular rarefaction wave

The growth of magnetic fields in the density gradient of a rarefaction wave has been observed in simulations and in laboratory experiments. The thermal anisotropy of the electrons, which gives rise to the magnetic instability, is maintained by the ambipolar electric field. This simple mechanism could be important for the magnetic field amplification in astrophysical jets or in the interstellar medium ahead of supernova remnant shocks. The acceleration of protons and the generation of a magnetic field by the rarefaction wave, which is fed by an expanding circular plasma cloud, is examined here in form of a 2D particle-in-cell simulation. The core of the plasma cloud is modeled by immobile charges, and the mobile protons form a small ring close to the cloud's surface. The number density of mobile protons is thus less than that of the electrons. The protons of the rarefaction wave are accelerated to 1/10 of the electron thermal speed, and the acceleration results in a thermal anisotropy of the electron distribution in the entire plasma cloud. The instability in the rarefaction wave is outrun by a TM wave, which grows in the dense core distribution, and its magnetic field expands into the rarefaction wave. This expansion drives a secondary TE wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bias-free lateral terahertz emitters—A simulation study

The design and performance of bias-free InN-based THz emitters that exploit lateral photocurrents is studied by means of numerical simulations. We use a drift-diffusion model with adjusted carrier temperatures and mobilities. The applicability of this approach is demonstrated by a comparison with results from Monte-Carlo simulations. We consider a simple but robust lateral emitter concept using metal stripes with two different thicknesses with one of them being thin enough to be transparent for THz radiation. This arrangement can be easily multiplexed and the efficiency of this concept has already been demonstrated by experiment for GaAs substrates. In the present study, we consider InN, which is known to be an efficient photo-Dember emitter because of its superior transport properties. Our main focus is on the impact of the emitter design on the emission efficiency assuming different operation principles. Both the lateral photo-Dember (LPD) effect and built-in lateral field effects are considered. The appropriate choice of the metal stripe and window geometry as well as the impact of surface Fermi level pinning are investigated in detail, and design guidelines for efficient large area emitters using multiplexed structures are provided. We find that InN LPD emitters do not suffer from Fermi level pinning at the InN surface. The optimum emission efficiency is found for LPD emitter structures having 200 nm wide illumination windows and mask stripes. Emitter structures in which lateral electric fields are induced by the metal mask contacts can have a considerably higher efficiency than pure LPD emitters. In the best case, the THz emission of such structures is increased by one order of magnitude. Their optimum window size is 1 μm without the necessity of a partially transparent set of mask stripes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗