Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Spatially-Variant Tikhonov Regularization for Double-Difference Waveform Inversion

Double-difference waveform inversion is a potential tool for quantitative monitoring for geologic carbon storage. It jointly inverts time-lapse seismic data for changes in reservoir geophysical properties. Due to the ill-posedness of waveform inversion, it is a great challenge to obtain reservoir changes accurately and efficiently, particularly when using time-lapse seismic reflection data. Regularization techniques can be utilized to address the issue of ill-posedness. The regularization parameter controls the smoothness of inversion results. A constant regularization parameter is normally used in waveform inversion, and an optimal regularization parameter has to be selected. The resulting inversion results are a trade off among regions with different smoothness or noise levels; therefore the images are either over regularized in some regions while under regularized in the others. In this paper, we employ a spatially-variant parameter in the Tikhonov regularization scheme used in double-difference waveform tomography to improve the inversion accuracy and robustness. We compare the results obtained using a spatially-variant parameter with those obtained using a constant regularization parameter and those produced without any regularization. We observe that, utilizing a spatially-variant regularization scheme, the target regions are well reconstructed while the noise is reduced in the other regions. We show that the spatially-variant regularization scheme provides the flexibility to regularize local regions based on the a priori information without increasing computational costs and the computer memory requirement.

ACCURACY↗

Selective amplification of the lower-frequency branch via stimulated super-radiance in a waveguided free electron laser oscillator driven by short electron bunches

In this letter, we propose a mechanism to extend the spectral range of a waveguided free electron laser (FEL) oscillator driven by a rf LINAC toward significantly longer wavelengths without changing the undulator or accelerator design parameters. This mechanism involves selective amplification of a lower-frequency branch supported in a FEL due to the waveguide dispersion. Based on simulations performed for the terahertz FEL under construction at the Radboud University Nijmegen, we conclude that these long wavelengths can be efficiently amplified via stimulated super-radiance as the electron bunches are shorter than the radiation wavelength.

43 PARTICLE ACCELERATORS↗

A study on the clustering properties of radio-selected sources in the Lockman Hole region at 325 MHz

Studying the spatial distribution of extragalactic source populations is vital in understanding the matter distribution in the Universe. It also enables understanding the cosmological evolution of dark matter density fields and the relationship between dark matter and luminous matter. Clustering studies are also required for EoR foreground studies since it affects the relevant angular scales. This paper investigates the angular and spatial clustering properties and the bias parameter of radio-selected sources in the Lockman Hole field at 325 MHz. The data probes sources with fluxes ≳0.3 mJy within a radius of 1.8° around the phase centre of a 6° × 6° mosaic. Based on their radio luminosity, the sources are classified into Active Galactic Nuclei (AGNs) and Star-Forming Galaxies (SFGs). Clustering and bias parameters are determined for the combined populations and the classified sources. The spatial correlation length and the bias of AGNs are greater than SFGs- indicating that more massive haloes host the former. This study is the first reported estimate of the clustering property of sources at 325 MHz, intermediate between the pre-existing studies at high and low-frequency bands. It also probes a well-studied deep field at an unexplored frequency with moderate depth and area. Clustering studies require such observations along different lines of sight, with various fields and data sets across frequencies to avoid cosmic variance and systematics. Thus, an extragalactic deep field has been studied in this work to contribute to this knowledge.

79 ASTRONOMY AND ASTROPHYSICS↗

Global Sampling for Integrating Physics-Specific Subsystems and Quantifying Uncertainties of CO 2 Geological Sequestration

The risk of CO 2 leakage from a deep storage reservoir into a shallow aquifer through a fault is assessed and studied using physics-specific computer models. The hypothetical CO 2 geological sequestration system is composed of three subsystems: a deep storage reservoir, a fault in caprock, and a shallow aquifer, which are modeled respectively by considering sub-domain-specific physics. Supercritical CO 2 is injected into the reservoir subsystem with uncertain permeabilities of reservoir, caprock, and aquifer, uncertain fault location, and injection rate (as a decision variable). The simulated pressure and CO 2 /brine saturation are connected to the fault-leakage model as a boundary condition. CO 2 and brine fluxes from the fault-leakage model at the fault outlet are then imposed in the aquifer model as a source term. Moreover, uncertainties are propagated from the deep reservoir model, to the fault-leakage model, and eventually to the geochemical model in the shallow aquifer, thus contributing to risk profiles. To quantify the uncertainties and assess leakage-relevant risk, we propose a global sampling-based method to allocate sub-dimensions of uncertain parameters to sub-models. The risk profiles are defined and related to CO 2 plume development for pH value and total dissolved solids (TDS) below the EPA's Maximum Contaminant Levels (MCL) for drinking water quality. A global sensitivity analysis is conducted to select the most sensitive parameters to the risk profiles. The resulting uncertainty of pH- and TDS-defined aquifer volume, which is impacted by CO 2 and brine leakage, mainly results from the uncertainty of fault permeability. Subsequently, high-resolution, reduced-order models of risk profiles are developed as functions of all the decision variables and uncertain parameters in all three subsystems.

25 ENERGY STORAGE↗

Forced convective flow and heat transfer of upward cocurrent air-water slug flow in vertical plain and swirl tubes

This experimental study comparatively examined the two-phase flow structures, pressured drops and heat transfer performances for the cocurrent air-water slug flows in the vertical tubes with and without the spiky twisted tape insert. The two-phase flow structures in the plain and swirl tubes were imaged using the computerized high frame-rate videography with the Taylor bubble velocity measured. Superficial liquid Reynolds number (Re{sub L}) and air-to-water mass flow ratio (AW), which were respectively in the ranges of 4000-10000 and 0.003-0.02 were selected as the controlling parameters to specify the flow condition and derive the heat transfer correlations. Tube-wise averaged void fraction and Taylor bubble velocity were well correlated by the modified drift flux models for both plain and swirl tubes at the slug flow condition. A set of selected data obtained from the plain and swirl tubes was comparatively examined to highlight the impacts of the spiky twisted tape on the air-water interfacial structure and the pressure drop and heat transfer performances. Empirical heat transfer correlations that permitted the evaluation of individual and interdependent Re{sub L} and AW impacts on heat transfer in the developed flow regions of the plain and swirl tubes at the slug flow condition were derived. (author)

02 PETROLEUM↗

Automated shaker placement and regularized input estimation for MIMO testing.

Multi-input, multi-output (MIMO) testing is used in component qualification to reproduce operational responses in the laboratory. It is often preferred to single-input and base-shake testing because of the potential for equivalent or better tests using smaller actuators and shorter test suites. Given a target response, two key steps in MIMO test design are selecting actuator locations and solving for input loads. Actuator locations are often manually selected using expert judgment. If an automatic method is used, locations are usually determined by simulating the vibration control problem and minimizing a combination of the input energy and control residuals. To select a configuration, the relative importance of input energy and residuals must be specified. Specifying relative weights is, in general, a manual and subjective process. This paper develops an objective function that compares actuator configurations based on control accuracy and required input energy without any manual parameter tuning. The objective function uses an optimally selected tradeoff parameter for each candidate configuration. To choose actuator locations using the new objective function, a pivoting algorithm for integer programming problems is developed. Starting with an initial configuration (such as the one generated by a greedy algorithm), the pivoting algorithm guarantees an objective function decrease in each iteration until convergence is reached. In a simulation featuring a structure excited by a diffuse acoustic field, electrodynamic shaker locations and regularized inputs are solved for without any analyst-specified parameters. Simulations are performed in MIMO configurations where the number of target responses is less than, equal to, and greater than the number of actuators.

Multi-input multi-output↗

Differential Mobility Spectrometry for Improved Selectivity in Hydrophilic Interaction Liquid Chromatography-Tandem Mass Spectrometry Analysis of Paralytic Shellfish Toxins

Paralytic shellfish toxins (PSTs) are neurotoxins produced by dinoflagellates and cyanobacteria that cause paralytic shellfish poisoning in humans. PST quantitation by LC-MS is challenging because of their high polarity, lability as gas-phase ions, and large number of potentially interfering analogues. Differential mobility spectrometry (DMS) has the potential to improve the performance of LC-MS methods for PSTs in terms of selectivity and limits of detection. This work describes a comprehensive investigation of the separation of 16 regulated PSTs by DMS and the development of highly selective LC-DMS-MS methods for PST quantitation. The effects of all DMS parameters on the separation of PSTs from one another were first investigated in detail. The labile nature of 11α-gonyautoxin epimers gave unique insight into fragmentation of labile analytes before, during, and after the DMS analyzer. Two sets of DMS parameters were identified that either optimized the resolution of PSTs from one another or transmitted them at a limited number of compensation voltage (CV) values corresponding to structural subclasses. These were used to develop multidimensional LC-DMS-MS/MS methods using existing HILIC-MS/MS parameters. In both cases, improved selectivity was observed when using DMS, and the quantitative capabilities of a rapid UPLC-DMS-MS/MS method were evaluated. Limits of detection of the developed method were similar to those without DMS, and differences were highly analyte-dependant. Analysis of shellfish matrix reference materials showed good agreement with established methods. The developed methods will be useful in cases where specific matrix interferences are encountered in the LC-MS/MS analysis of PSTs in complex biological samples. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Parameter estimation with maximal updated densities

A recently developed measure-theoretic framework solves a stochastic inverse problem (SIP) for models where uncertainties in model output data are predominantly due to aleatoric (i.e., irreducible) uncertainties in model inputs (i.e., parameters). The subsequent inferential target is a distribution on parameters. Another type of inverse problem is to quantify uncertainties in estimates of “true” parameter values under the assumption that such uncertainties should be reduced as more data are incorporated into the problem, i.e., the uncertainty is considered epistemic. A major contribution of this work is the formulation and solution of such a parameter identification problem (PIP) within the measure-theoretic framework developed for the SIP. The approach is novel in that it utilizes a solution to a stochastic forward problem (SFP) to update an initial density only in the parameter directions informed by the model output data. In other words, this method performs “selective regularization” only in the parameter directions not informed by data. Further, the solution is defined by a maximal updated density (MUD) point where the updated density defines the measure-theoretic solution to the PIP. Another significant contribution of this work is the full theory of existence and uniqueness of MUD points for linear maps with Gaussian distributions. Data-constructed Quantity of Interest (QoI) maps are also presented and analyzed for solving the PIP within this measure-theoretic framework as a means of reducing uncertainties in the MUD estimate. We conclude with a demonstration of the general applicability of the method on two problems involving either spatial or temporal data for estimating uncertain model parameters. The first problem utilizes spatial data from a stationary partial differential equation to produce a MUD estimate of an uncertain boundary condition. The second problem utilizes temporal data obtained from the state-of-the-art ADvanced CIRCulation (ADCIRC) model to obtain a MUD estimate of uncertain wind drag coefficients for a simulated extreme weather event near the Shinnecock Inlet located in the Outer Barrier of Long Island, NY, USA.

42 ENGINEERING↗

Gradient process parameter optimization in additive friction stir deposition of aluminum alloys

As one of the most novel additive manufacturing methods, currently selection and optimization of processing parameters in additive friction stir deposition (AFSD) have mainly relied on experiments and subsequent characterization of microstructural and mechanical properties. Such approaches are both time- and resource-consuming. Therefore, an ultrasound elastography enhanced gradient process parameter optimization method was applied in the present work to obtain a window of optimized processing parameters for AFSD processing of aluminum alloy by varying both rotational and linear deposition speeds. Further, the quality of AFSD processed layer was investigated for physical nature of surface, dynamic elastic modulus, and microstructural aspects in cross-sections of the deposited layer. The efficiency in exploring process parameters was significantly enhanced by implementing a high-throughput screening experimental design based on application of gradient process parameters and continuous ultrasound elastographs. In addition, the applied ultrasonic elastography technique assisted in evaluating the homogeneity in microstructure and mechanical properties of AFSD sample over the entire gradients of the process parameters. The techniques adopted in current work can be further extended to identify suitable parameters for AFSD fabrication of components with desired mechanical properties such as hardness, fatigue, etc.

36 MATERIALS SCIENCE↗

Infrared Laser-Induced Isotope-Selective Dissociation of Molecular van der Waals (SF{sub 6}){sub m}Ar{sub n} Clusters

The results of studies on the isotope-selective dissociation of homogeneous and mixed van der Waals (SF{sub 6}){sub m}Ar{sub n} clusters induced by infrared laser radiation are presented. The method is based on the selective vibrational excitation of clusters by an infrared laser, which leads to their heating and dissociation. An experimental setup and procedure are described. The results of measurements of the efficiency and selectivity of cluster dissociation at different pressures and gas compositions above the nozzle, as well as various parameters of laser radiation, are presented. The dependences of the efficiency and selectivity of cluster dissociation on the frequency and power of the exciting laser radiation on the composition and pressure of gas above the nozzle, as well as on the distance of the irradiation zone of the particles on the nozzle exit are obtained. It is shown that the frequency of laser radiation and the composition and pressure of gas above the nozzle significantly affect the parameters of selective infrared dissociation of clusters. Experiments on isotope-selective dissociation of both homogeneous (SF{sub 6}){sub m} clusters and mixed (SF{sub 6}){sub m}Ar{sub n} clusters are performed. It was found that, with the dissociation of (SF{sub 6}){sub m}Ar{sub n} clusters, a rather high selectivity can be reached. Thus, in the case of an SF{sub 6}/Ar mixture at a pressure ratio of 1/200, for the selectivity of dissociation of ({sup 32}SF{sub 6}){sub 2} clusters with respect to {sup 34}SF{sub 6}{sup 32}SF{sub 6} clusters, the values ≥10–20 are obtained under conditions of irradiation by a beam on the 10P(32) laser line (at a frequency of 932.96 cm{sup –1}). Conditions are found when the values of efficiency and selectivity of dissociation of homogeneous (SF{sub 6}){sub m} clusters and mixed (SF{sub 6}){sub m}Ar{sub n} clusters are optimal.

74 ATOMIC AND MOLECULAR PHYSICS↗

Three dimensional dust-acoustic solitary waves in an electron depleted dusty plasma with two-superthermal ion-temperature

A theoretical investigation is carried out to study the existence and characteristics of propagation of dust-acoustic (DA) waves in an electron-depleted dusty plasma with two-temperature ions, which are modeled by kappa distribution functions. A three-dimensional cylindrical Kadomtsev-Petviashvili equation governing evolution of small but finite amplitude DA waves is derived by means of a reductive perturbation method. The influence of physical parameters on solitary wave structure is examined. Furthermore, the energy integral equation is used to study the existence domains of the localized structures. It is found that the present model can be employed to describe the existence of positive as well as negative polarity DA solitary waves by selecting special values for parameters of the system, e.g., superthermal index of cold and/or hot ions, cold to hot ion density ratio, and hot to cold ion temperature ratio. This model may be useful to understand the excitation of nonlinear DA waves in astrophysical objects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transformer Leakage Inductance Design Methodology

The leakage inductance exhibited by a transformer depends on its winding geometry, which generally involves the selection of several key design parameters in addition to the winding structure and the interleaving configuration. With few resources explaining the effects of these design choices on the observed leakage inductance, numerous trial-and-error iterations become necessary to realize the desired leakage inductance. This paper explores more than a hundred winding geometries feasible in a 2-winding transformer comprising the same magnetic core, number of turns, and wire gauge, and finds the leakage inductance for each unique design using 2-D finite element method (FEM) simulations in association with the semi-analytical double- 2-D model. These leakage inductances are plotted and further analyzed to understand the effects of different design parameters on the effective leakage inductance. The results presented herein and the conclusions drawn from this research can serve as a valuable resource for future design practitioners from both industry and academia.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mechanistic Study of 1,2-Dichloroethane Hydrodechlorination on Cu-Rich Pt–Cu Alloys: Combining Reaction Kinetics Experiments with DFT Calculations and Microkinetic Modeling

Cu-rich Pt–Cu bimetallic catalysts are among the most promising candidates for actively catalyzing the hydrodechlorination of 1,2-dichloroethane (1,2-DCA) toward ethylene production. Combining reaction kinetics experiments with density functional theory (DFT) calculations and mean-field microkinetic modeling, we present a systematic mechanistic study for 1,2-DCA hydrodechlorination on Cu-rich Pt–Cu alloy catalysts. Our DFT (PBE+(TS+SCS)) results suggest that increasing Cu content in the Pt–Cu alloy destabilizes C 2 -species adsorption while stabilizing the binding of atomic chlorine. The reaction energetics of all the elementary steps in the 1,2-DCA reaction network were calculated on a Pt 1 Cu 3 (111) model surface. The DFT results were then used to construct a microkinetic model, and the model-predicted reaction rates were compared with our reaction kinetics experimental results on a Cu-rich SiO 2 -supported Pt–Cu alloy catalyst through a parameter estimation procedure. Both the reaction kinetics experiments and the microkinetic model after parameter adjustments yielded 100% selectivity to ethylene. The microkinetic model pointed to a reaction pathway involving two sequential chlorine-removal steps on the Pt–Cu alloy catalyst, a mechanism distinct from the one previously identified on pure Pt/SiO 2 catalysts, which involved an initial hydrogen-removal step. Adjustments to the DFT-derived parameters indicate the possible formation of chlorine-induced Cu-enriched surface sites during 1,2-DCA hydrodechlorination conditions, sites that are more active than those encountered in the bulk Pt 1 Cu 3 (111) alloy surface. Furthermore, our study offers valuable initial insights on the 1,2-DCA hydrodechlorination reaction mechanism and the nature of the active sites on PtCu bimetallic catalysts.

1,2-Dichloroethane↗

Evaluation of Rapid for a UNF cask benchmark problem

To ensure criticality safety and maintain a high level of security of Used Nuclear Fuel (UNF), it is necessary to perform detailed Particle Transport simulations. The commonly used technique is the 3-D, continuous energy Monte Carlo method that is time-consuming and, for eigenvalue calculations, may have difficulties with the source convergence. Wenner and Haghighat and Dufek demonstrated that in criticality problems with high dominance ratio and/or under-sampling possibilities, the fission matrix (FM) methodology should be used in order to be able to obtain unbiased solution. The RAPID (Real-time Analysis for Particle transport and In-situ Detection) code system is based on the Multi-stage Response-function Transport (MRT) methodology, and uses the FM formulation to determine eigenvalue, subcritical multiplication and fission density distribution of nuclear systems. This paper uses a benchmark problem similar to the GBC-32 Cask to evaluate the accuracy and performance of RAPID against the results of a reference MCNP solution. We performed a detailed sensitivity analysis on a single-assembly model in order to determine the MCNP eigenvalue parameters necessary to obtain a reliable reference solution. These results provided a guide for the selection of an appropriate set of parameters for the eigenvalue calculation for the whole cask. The paper is organized as follows: initially, the RAPID code system is briefly discussed; then, the benchmark problem is introduced. The methodology used to analyze results is proposed and some of the results of different cases are analyzed to identify the best set of eigenvalue parameters for a reference MCNP calculation. The selected case is then compared with the RAPID calculation for both a single assembly and a full cask model. In the end some conclusions and future work perspectives are drawn.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A novel process for production of spherical PBT powders and their processing behavior during laser beam melting

Additive manufacturing processes like laser beam melting of polymers are established for production of prototypes and individualized parts. The transfer to other areas of application and to serial production is currently hindered by the limited availability of polymer powders with good processability. Within this contribution a novel process route for the production of spherical polymer micron-sized particles of good flowability has been established and applied to produce polybutylene terephthalate (PBT) powders. Moreover, the applicability of the PBT powders in selective laser beam melting and the dependencies of process parameters on device properties will be outlined. First, polymer micro particles are produced by a novel wet grinding method. To improve the flowability the produced particles the particle shape is optimized by rounding in a heated downer reactor. A further improvement of flowability of the cohesive spherical PBT particles is realized by dry coating. An improvement of flowability by a factor of about 5 is achieved by subsequent rounding of the comminution product and dry-coating as proven by tensile strength measurements of the powders. The produced PBT powders were characterized with respect to their processability. Therefore thermal, rheological, optical and bulk properties were analyzed. Based on these investigations a range of processing parameters was derived. Parameter studies on thin layers, produced in a selective laser melting system, were conducted. Hence appropriate parameters for processing the PBT powders by laser beam melting, like building chamber temperature, scan speed and laser power have been identified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Statistical Strength Analysis of Dissimilar AA2024-T6 and AA6061-T6 Friction Stir Welded Joints

Friction stir welding has been emerged as one of the most reliable processes for joining aerospace-grade aluminum alloys. However, limited studies have been focused so far on the reliability of these joint types. In this study, the effect of welding parameters (traverse and rotation speeds) on the fracture strength of dissimilar AA2024-T6 and AA6061-T6 friction stir welded joints was statistically analyzed by the Weibull approach. Based on the results, the Weibull approach was found to be much more accurate than widely used standard deviation for evaluating the scatter of the fracture strength data. The improper selection of the process parameters not only decreased the average fracture strengths of the joints, but also scattered them around the mean value, and increased the failure probability under the same applied tension. According to the microscopic and macroscopic examinations and microhardness measurements, although the microstructural inhomogeneities caused by the improper setting of the welding parameters negatively affected the joints hardness and fracture strength, the welding defects were likely to be the most responsible factor affecting the fracture strength and its reliability.

36 MATERIALS SCIENCE↗

Gaussian kernel density functions for compositional quantification in atom probe tomography

Highlights: • A methodology for compositional quantification from atom probe tomography is proposed. • A probability density function p(x) given discrete data points is constructed. • Each atom approximated by a Gaussian function with a particular smoothing parameter. • Density Kernel functions are used to find the optimum smoothing parameter. • The method is validated by using simulated data of semiconductor materials. - Abstract: Atom probe tomography (APT) has the ability to identify the nature and position of single atoms in a material with an almost 3D atomic resolution. However, the quantification of the material composition requires an appropriate treatment of the discrete APT data. When the amount of atoms selected to quantify the composition is relatively small, the spatial resolution is enhanced but the statistical error worsens. Conversely, the increase in the number of atoms considered reduces the spatial resolution, but improving the statistics. We have developed a methodology to reach an optimum equilibrium between the positional and the statistical error in an unsupervised form using Gaussian Kernel density functions. The validity of the method has been tested using APT simulated data of semiconductor materials. It has been proved that the chemical quantification in these materials requires the appropriate selection of the smoothing parameter, obtained without user intervention. In addition, the results have been compared to the usual techniques for composition measurement from APT data (voxelization and proximity histograms), showing better precision for high spatial resolution. This work supplies a data driven methodology based in Gaussian Kernel density functions for the accurate quantification of the composition from APT data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Catalytic Hydrogenation of Alkylphenols for Renewable Caprolactone

Selective hydrogenation of lignin-derived alkyl-phenol to alkyl-cyclohexanone is a key step in the synthesis of renewable caprolactone from lignin-derived monomers. Selective hydrogenation of p-cresol, a model compound for lignin-derived monomers, to 4-methyl-cyclohexanone was conducted using Pd/γ-Al 2 O 3 in a continuous three-phase flow reactor with side products of 4-methyl cyclohexanol. High conversion (85%) and selectivity (>93%) were demonstrated at ambient reaction pressure. Evaluation of the hydrogenation at different reaction parameters showed that the reaction selectivity was determined by the surface coverage of p-cresol and 4-methyl cyclohexanone. Furthermore, high selectivity to 4-methyl cyclohexanone was also attributed to the lower apparent activation barrier of p-cresol hydrogenation (67 ± 2 kJ mol –1 ) compared to that of hydrogenation 4-methyl cyclohexanone (92 ± 11 kJ mol –1 ), with a faster rate of initial hydrogenation of p-cresol relative to carbonyl hydrogenation of 4-methyl-cyclohexanone.

36 MATERIALS SCIENCE↗