Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Measurements and modeling of type-I and type-II ELMs heat flux to the DIII-D divertor

Type-I and type-II edge-localized-modes (ELMs) heat flux profiles measured at the DIII-D divertor feature a peak in the vicinity of the strike-point and a plateau in the scrape-off-layer (SOL), which extends to the first wall. The plateau is present in attached and detached divertors and it is found to originate with plasma bursts upstream in the SOL. The integrated ELM heat flux is distributed at ~65% in the peak and ~35% in this plateau. The parallel loss model, currently used at ITER to predict power loads to the walls, is benchmarked using these results in the primary and secondary divertors with unprecedented constraints using experimental input data for ELM size, radial velocity, energy, electron temperature and density, heat flux footprints and number of filaments. The model can reproduce the experimental near-SOL peak within ~20%, but cannot match the SOL plateau. Employing a two-component approach for the ELM radial velocity, as guided by intermittent data, the full radial heat flux profile can be well matched. The ELM-averaged radial velocity at the separatrix, which explains profile widening, increases from ~0.2 km s –1 in attached to ~0.8 km s –1 in detached scenarios, as the ELM filaments' path becomes electrically disconnected from the sheath at the target. The results presented here indicate filaments fragmentation as a possible mechanism for ELM transport to the far-SOL and provide evidence on the beneficial role of detachment to mitigate ELM flux in the divertor far-SOL. However, these findings imply that wall regions far from the strike points in future machines should be designed to withstand significant heat flux, even for small-ELM regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Gyrokinetic profile prediction and validation of a negative triangularity plasma in ASDEX Upgrade

In this work, gyrokinetic simulations are performed with the CGYRO code (Candy et al 2016 J. Comput. Phys. 324 73–93) for a negative triangularity H-mode plasma in ASDEX Upgrade, and compared with experimental measurements. The PORTALS framework (Rodriguez-Fernandez et al 2024 Nucl. Fusion 64 076034) is used to accelerate the prediction of kinetic profiles for this plasma, using surrogate modeling and Bayesian optimization. Ion heat flux, electron heat flux, and electron particle flux are simultaneously matched across the simulated radial regime of the plasma (normalized radius $r/a = 0.35-0.90$), and the resulting ion temperature, electron temperature, and electron density profiles match well with the experimental profile data within this radial range. A synthetic Correlation Electron Cyclotron Emission diagnostic is applied to find well-matched electron temperature fluctuation properties between simulation and experiment. The flux-matched profiles provide a basis for investigation of the turbulence nature across the plasma radius, revealing the dominance of Trapped Electron Mode turbulence at $r/a = 0.35$, the dominance of Ion Temperature Gradient turbulence at $r/a = 0.55$, 0.75, and 0.83, and an instability boundary at $r/a = 0.90$.

gyrokinetic simulation↗
DOE OSTI2021

R&D Toward CUPID, a Tonne-Scale Bolometric 0vBB Experiment (Final Report)

This award supported the construction of infrastructure at MIT to test components for the future CUPID experiment. CUPID is the CUORE Upgrade with Particle ID. It uses Lithium molybdate crystals instrumented as scintillating bolometers to search for the neutrinoless double-beta decay of 100 Mo. A bolometer is a detector which uses the change in temperature of a crystal due to the passage of charged particles through the crystal to detect the particle. A scintillating bolometer uses a scintillating crystal as the primary bolometer and a germanium wafer as a secondary light-collecting bolometer. The charged particle therefore creates a heat and light signal, the ratio of these signals allows us to distinguish signal from background.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Implementation and Results of Extended-MHD Post-processing of xRAGE Simulations

Magnetic fields are known to affect the evolution of conducting fluids via the J× B force, where J is the current density and B is the magnetic field. Typically, J× B in high energy density plasmas (HEDP) systems is considered small compared to the plasma pressure gradients. However, many experiments lie in a part of the parameter space where the plasma is indirectly affected via magnetization of the heat flux and charged particle transport. This is true even for initially unmagnetized plasmas, since misaligned density and temperature gradients can self-generate the so-called Biermann magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Collective Energy Transport of Excitons in Two-dimensional Materials

Electronic thermal transport and thermoelectric measurements are pursued in this project to obtain unique insights into the unusual collective energy transport behaviors in two-dimensional (2D) heterostructures. Electronic thermal transport and thermoelectric measurements are essential techniques for characterizing bulk superconductors by probing the heat-carrying quasi-particles. Thermoelectric and electronic thermal transport measurements are expanded in this work beyond bulk systems to probe interactions among electrons, holes, and phonons in 2D heterostructures. In one experiment, a microbridge platform is advanced to demonstrate field-effect resistive-thermometry measurements of the electronic thermal conductivity of graphene heterostructures. Together with first principles theoretical calculations and analytical models, the experimental results suggest that tunable electron coupling with flexural phonons provides a knob to control quantum matters in graphene heterostructures with broken reflection symmetry. In another experiment, the Seebeck coefficient (S) is measured to probe interlayer interactions in electron-hole bilayers that are predicted to give rise to the emergence of a variety of correlated states. As a measure of the entropy, the measured S reveals the signature of electric injection of interlayer excitons in transition metal dichalcogenide (TMD) structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

MRT 7365: Power flow physics and key physics phenomena

The Z accelerator at Sandia National Laboratories conducts z-pinch experiments at 26 MA in support of DOE missions in stockpile stewardship, dynamic materials, fusion, and other basic sciences. Increasing the current delivered to the z-pinch would extend our reach in each of these disciplines. To achieve increases in current and accelerator efficiency, a fraction of Z’s shots are set aside for research into transmission-line power flow. These shots, with supporting simulations and theory, are incorporated into this Advanced Diagnostics milestone report. The efficiency of Z is reduced as some portion of the total current is shunted across the transmission-line gaps prior to the load. This is referred to as “current loss”. Electrode plasmas have long been implicated in this process, so the bulk of dedicated power-flow experiments are designed to measure the plasma environment. The experimental analyses are enhanced by simulations conducted using realistic hardware and Z voltage pulses. In the same way that diagnostics are continually being improved for sensitivity and resolution, the modeling capability is continually being improved to provide faster and more realistic simulations. The specifics of the experimental hardware, diagnostics, simulations, and algorithm developments are provided in this report. The combined analysis of simulation and data confirms that electrode plasmas have the most detrimental impact on current delivery. Experiments over the last three years have tested the theoretical current-loss mechanisms of enhanced ion current, plasma gap closure, and Hall-related current. These mechanisms are not mutually exclusive and may be coincident in the final feed as well as in upstream transmission lines. The final-feed geometries tested here, however, observe lower-density plasmas without dominant ion currents which is consistent with a Hall-related current. The picture of plasma formation and transport formed from experiment and simulation is informing hardware designs being fielded on Z now and being proposed for the Next-Generation Pulsed Power (NGPP) facility. In this picture, the strong magnetic fields that heat the electrodes above particle emission thresholds also confine the charged particles near the surface. Some portion of the plasmas thus formed is transported into the transmission-line gap under the force of the electric field, with aid from plasma instabilities. The gap plasmas are then transported towards the load by a cross-field drift, where they accumulate and contribute to a likely Hall-related cross-gap current. The achievements in experimental execution, model validation, and physical analysis presented in this report set the stage for continued progress in power flow and load diagnostics on Z. The planned shot schedule for Z and Mykonos will provide data for extrapolation to higher current to ensure the predicted performance and efficiency of a NGPP facility.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Distinguishability of Radially Directed Energy and Particle Flux in the TJ-II Heliac: Controlling Transport by Feedback-Phasing Experiments

This project supported a U.S. contribution to the TJ-II stellarator research program focused on distinguishing radially directed particle transport from energy transport in magnetized fusion plasmas. The motivating physics issue is that turbulent particle flux and turbulent heat or energy flux are not necessarily locked together: changes in density, electron temperature, plasma potential, and electric-field fluctuations can produce different phase relationships and therefore different radial fluxes. Resolving these relationships is important for understanding improved-confinement behavior, transport-barrier-like regimes, and the broader ability to predict and control confinement in stellarators and related toroidal devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

An Approach for Simulating Transport of Nonspherical, Sublimating Particles in Rarefied Gas Flows via the Direct Simulation Monte Carlo Method

This paper extends the particle Green’s function approach of Gallis et al. [Phys. Fluids 13, 3482–3492 (2001)] to compute the force and heat transfer on nonspherical, sublimating particles in rarefied gas flows. Green’s functions are derived for rods and plates, which are representative of ice particle shapes, and a numerical procedure is developed for computing the Green’s functions for a general discretized convex shape. Additionally, a sublimation model is developed to simulate the evolution of ice particles in rarefied gas flows. These models are implemented in a direct simulation Monte Carlo code and demonstrated for the case of ice-particle-laden hypersonic flow over a ramp.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1972

Stability of the Venus ionopause

The ionopause of the Venus ionosphere, as indicated by Mariner 5 electron density data, and which occurs at 500km on the day side, and 2500km on the night side is discussed in terms of the solar wind interaction with the ionosphere. It is concluded that for a source of stabilization by heating to be effective, a small horizontal magnetic field is required to reduce the downward heat conduction of charged particles, and it has been shown that such a magnetic field is present.

Herman, J.↗
NASA NTRS1974

Analyses of unsteady entropic-flow processes

One important aspect in these analyses is the derivation of physical mechanism of converted entropic perturbations, which is also directly related to mixing of fluids. In development of frictional fluid motion, entropy gradients of moving fluid particles perpetually increase. This growth is due to fluid particles which have been heated by frictional flow effects and are constantly lagging behind colder fluid.

Peter, A. C.↗
NASA NTRS1975

Heat conduction in metal-filled polymers - The role of particle size, shape, and orientation

This paper presents a new type of analysis for predicting the thermal conductivity of disperse composites from the properties of the component phases and elementary characterizations of particle shapes and orientation. This analysis successfully predicted the sensitivity to particle shape which was confirmed by experiments also reported in this paper. These results suggest that highly elongated particles may be used to achieve dramatic modifications of thermal conductivity and the analysis presented here may be a useful tool in the design or development of disperse composites of specific thermal conductivity. The analysis may also apply to other properties such as electrical conductivity or magnetic permeability.

Hansen, D.↗
NASA NTRS1979

Energy deposition in the earth's atmosphere due to impact of solar activity-generated disturbances

Energy deposition in and dynamic responses of the terrestrial atmosphere to solar flare-generated shocks and other physical processes - such as particle precipitation and local heating - are investigated self-consistently in the context of hydrodynamics, the problem being treated as an initial boundary-value problem. It is extremely difficult to construct a general model for the line solar activity-magnetosphere-atmosphere; however, a limited model for this link is possible. The paper describes such a model, and presents some results on energy deposition into the earth's atmosphere due to solar activity-generated disturbances. Results from the present calculations are presented and discussed.

Wu, S. T.↗
NASA NTRS1980

Flare models

The current status of solar flare modeling is reviewed. Primary and secondary observational features that a proposed flare model should be capable of explaining are discussed, including energy storage and release, particle acceleration, mass ejection, heating of the temperature minimum region, X-ray, EUV, UV, visible and radio emission and mass flow. Consideration is then given to the twisted flux tube paramagnetic recombination model of Gold and Hoyle (1960), the current model of Alfven and Carlqvist (1967), closed current-sheet models such as those of Syrovatskii (1966, 1969, 1977) and Uchida and Sakurai (1977), open-field models such as those of Carmichael (1964) and Barnes and Sturrock (1972), the emerging flux model of Heyvaerts and Priest (1974, 1977, 1978) and the loop-flare models of Spicer (1977) and Colgate (1978). It is noted that no one model can yet account for all the observational features, and that there may turn out to be several types of flare, each requiring its own explanation.

Sturrock, P. A.↗
NASA NTRS1983

Exhaust-Plume Impingement Characteristics

Model for rocket-exhaust plumes calculates effects of heat, pressure, and particle-impingement on nearby structures. Model has potential industrial applications in studies of impingement of multiphase mixtures inside coalgasification equipment and turbines.

Smith, S. D.↗
NASA NTRS1982

Space environment and lunar surface processes, 2

The top few millimeters of a surface exposed to space represents a physically and chemically active zone with properties different from those of a surface in the environment of a planetary atmosphere. To meet the need or a quantitative synthesis of the various processes contributing to the evolution of surfaces of the Moon, Mercury, the asteroids, and similar bodies, (exposure to solar wind, solar flare particles, galactic cosmic rays, heating from solar radiation, and meteoroid bombardment), the MESS 2 computer program was developed. This program differs from earlier work in that the surface processes are broken down as a function of size scale and treated in three dimensions with good resolution on each scale. The results obtained apply to the development of soil near the surface and is based on lunar conditions. Parameters can be adjusted to describe asteroid regoliths and other space-related bodies.

Comstock, G. M.↗