Search NASA⌕ Search

SEARCH · Search NASA

Results for “statistical processing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Prediction on Underestimation of Statistical Uncertainty in Monte Carlo Eigenvalue Calculation for Two-dimensional Heterogeneous Color Set Geometry

In a Monte Carlo calculation, statistical uncertainty is inevitably included in the result. The statistical uncertainty is commonly estimated by the central limit theorem without considering correlation among generations. The statistical uncertainty is usually expected to decrease at the inverse square root of the number of neutron histories. However, in a Monte Carlo eigenvalue calculation in a large geometry whose dominance ratio is close to unity, the central limit theorem would not be valid and thus the statistical uncertainty of fission source distribution can be significantly underestimated when inter-cycle correlation is not appropriately taken into account. The true statistical uncertainty can be calculated by statistical processing of the results obtained by multiple Monte Carlo runs using different initial random seeds, but this approach has a drawback of large calculation cost. Therefore, prediction of true statistical uncertainty by alternate approach is desirable. One of the solutions for this issue is an evaluation method of statistical uncertainty based on the eigenfunction expansion and the Autoregressive model (AR model). In this method, the true statistical uncertainty is theoretically derived by applying the AR model to behavior of expansion coefficients of eigenfunction in fission source distribution during cycles. Underestimation ratio of statistical uncertainty of fission source distribution can be predicted by this method. Note that the underestimation ratio of statistical uncertainty is defined by the ratio of estimated error by a Monte Carlo calculation to the true statistical error. In the previous study, the proposed method was verified in a simple condition such as one energy group, one dimensional homogeneous slab geometry. Contributions of this summary are as follows. Firstly, expression of the noise term that is appeared in the AR model is theoretically derived. Secondly, prediction on underestimation ratio of statistical uncertainty is carried out in a more general case, i.e., flux of each fuel cell in 2 x 2 heterogeneous assembly geometry taken from the C5G7 benchmark problem. Through the present study, applicability of the theoretical prediction for underestimation of statistical uncertainty in practical problems will be verified. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quantitative Insight to Fission Gas Pores Distribution in Irradiated Annular U-10Zr Metallic Fuel Using Machine Learning

Metallic fuels, particularly U-10Zr and its performance in reactor irradiation conditions, have been thoroughly investigated and are a promising candidate for next-generation sodium-cooled fast spectrum nuclear reactors. Irradiation in reactors can lead to the formation of fission gas and increased pore formation which can significantly impact fuel performance. Due to the large number of pores and various phases formed in metallic fuel during irradiation, a quantitative description of fission gas pores as a function of irradiation conditions is not yet available, undermining the fidelity of fuel performance modeling to support fuel qualification. It has been difficult to clearly detect pore boundaries and distinguish matrix phases from fission gas pores using optical microscopy by using simple threshold methods working with low magnification images. The pre-trained deep learning model for fission gas pore detection was applied to ~10,260 high magnification scanning electron microscopy images. The model increased the accuracy of fission gas pore segmentation to obtain statistical features, which cannot be processed manually. A pre-trained decision tree model was used to classify pores as isolated or connected pores, providing new insight into the correlation between the movement of lanthanides, solid fission products, and the radial temperature gradient developed in fuel irradiation conditions. This paper emphasizes the potential that artificial intelligence-based machine learning models have to accelerate qualification and support nuclear fuel development.

36 MATERIALS SCIENCE↗

Inter-well connectivity detection in CO 2 WAG projects using statistical recurrent unit models

Routine well-wise injection and production measurements contain significant information on subsurface structure and properties. Data-driven technology that interprets surface data into subsurface structure or properties can assist operators in making informed decisions by providing a better understanding of field assets. Our machine-learning framework is built on the statistical recurrent unit (SRU) model and interprets well-based injection/production data into inter-well connectivity without relying on a geologic model. We test it on synthetic and field-scale CO 2 EOR projects utilizing the water-alternating-gas (WAG) process. SRU is a special type of recurrent neural network (RNN) that allows for better characterization of temporal trends, by learning various statistics of the input at different time scales. In our application, the complete states (injection rate, pressure and cumulative injection) at injectors and pressure states at producers are fed to SRU as the input and the phase rates at producers are treated as the output. Once the SRU is trained and validated, it is then used to assess the connectivity of each injector to any producer using permutation variable importance method, wherein inputs corresponding to an injector are shuffled and the increase in prediction error at a given producer is recorded as the importance (connectivity metric) of the injector to the producer. This method is tested in both synthetic and field-scale cases. The validation of the proposed data-driven inter-well connectivity assessment is performed using synthetic data from simulation models where inter-well connectivity can be easily measured using the streamline-based flux allocation. The SRU model is shown to offer excellent prediction performance on the synthetic case. Despite significant measurement noise and frequent well shut-ins imposed in the field-scale case, the SRU model offers good prediction accuracy, the overall relative error of the phase production rates at most producers ranges from 10% to 30%. It is shown that the dominant connections identified by the data-driven method and streamline method are in close agreement. This significantly improves confidence in our data-driven procedure. The novelty of this work is that it is purely data-driven method and can directly interpret routine surface measurements to intuitive subsurface knowledge. Furthermore, the streamline-based validation procedure provides physics-based backing to the results obtained from data analytics. This study results in a reliable and efficient data analytics framework that is well-suited for large field applications.

42 ENGINEERING↗

Multipactor threshold calculation of coaxial transmission lines in microwave applications with nonstationary statistical theory

This paper presents a statistical theory for the initial onset of multipactor breakdown in coaxial transmission lines, taking both the nonuniform electric field and random electron emission velocity into account. A general numerical method is first developed to construct the joint probability density function based on the approximate equation of the electron trajectory. The nonstationary dynamics of the multipactor process on both surfaces of coaxial lines are modelled based on the probability of various impacts and their corresponding secondary emission. The resonant assumption of the classical theory on the independent double-sided and single-sided impacts is replaced by the consideration of their interaction. As a result, the time evolutions of the electron population for exponential growth and absorption on both inner and outer conductor, in response to the applied voltage above and below the multipactor breakdown level, are obtained to investigate the exact mechanism of multipactor discharge in coaxial lines. Furthermore, the multipactor threshold predictions of the presented model are compared with experimental results using measured secondary emission yield of the tested samples which shows reasonable agreement. Finally, the detailed impact scenario reveals that single-surface multipactor is more likely to occur with a higher outer to inner conductor radius ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reproductive and leaf litterfall fluxes in forest ecosystem sites globally (1950-2022)

Forest allocation of net primary productivity (NPP) to reproduction is poorly quantified globally, despite its critical role in forest regeneration and a well-supported trade-off with allocation to growth. Although field measurements of total NPP are rare, our work finds that a proxy for reproductive carbon allocation constructed from leaf (L) and reproductive (R) litterfall fluxes, R/(R+L), is strongly correlated with R/NPP, facilitating analysis across a wide range of sites where biometric estimates of NPP are not available (R² = 0.85; Hanbury-Brown et al., 2022, Ward et al., in prep). To investigate relationships between ecosystem-scale reproductive allocation (RA) and climate, soil fertility, and stand age gradients, we conducted a literature search and synthesized 824 observations of annual average leaf and reproductive litterfall fluxes across forest sites globally. The zip file includes 1) a folder Data/ containing the litterfall data ("GlobalForestRA_data.csv") and metadata ("GlobalForestRA_metadata.doc") files. The data file includes geographic coordinates, long-term mean annual temperature and precipitation (1970-2000, extracted from WorldClim2.1), leaf and reproductive litterfall fluxes, sampling interval and protocols, forest characteristics (dominant leaf morphology, information pertaining to forest age and successional stage, and disturbance history) and soil properties (% sand, %silt, %clay, total phosphorus (P), nitrogen (N), cation exchange capacity (CEC) and pH) extracted from SoilGrids250 and from on-site measurements, where available. The metadata file contains information about each variable reported in the data file, including data sources, processing methods, and all references. The Data folder contains two additional files used to create Figure 1; these are described in greater detail in the README.2) R scripts GloalForestRA_analysis.r and GlobalForestRA_SI.r and a folder /Functions used to produce results, figures, and tables in the manuscript Ward et al. (in press)3) a README file describing how the data and R scripts can be used to reproduce statistical results, figures, and tables found in the manuscript. Ward et al. (in press)This repository can also be found at: https://github.com/r-ward/Global_Analysis_ForestRA.Ward, R.E., Zhang-Zheng, H. Aernethy, K., Adu-Bredu, S., Arroyo, L., Bailey, A. et al. (in press). Forest age rivals climate to explain reproductive allocation patterns in forest ecosystems globally. Ecology Letters. Hanbury-Brown, A.R., Ward, R.E. & Kueppers, L.M. (2022). Forest regeneration within Earth system models: current process representations and ways forward. New Phytol., 235, 20–40.Ward et al. (2025), Forest age rivals climate to explain reproductive allocation patterns in forest ecosystems globally, in prep.

54 ENVIRONMENTAL SCIENCES↗

Two Person Zero-Sum Semi-Markov Games with Unknown Holding Times Distribution on One Side: A Discounted Payoff Criterion

This paper deals with two person zero-sum semi-Markov games with a possibly unbounded payoff function, under a discounted payoff criterion. Assuming that the distribution of the holding times H is unknown for one of the players, we combine suitable methods of statistical estimation of H with control procedures to construct an asymptotically discount optimal pair of strategies.

97 MATHEMATICS AND COMPUTING↗

Advances in Bayesian Model Based Clustering Using Particle Learning

Recent work by Carvalho, Johannes, Lopes and Polson and Carvalho, Lopes, Polson and Taddy introduced a sequential Monte Carlo (SMC) alternative to traditional iterative Monte Carlo strategies (e.g. MCMC and EM) for Bayesian inference for a large class of dynamic models. The basis of SMC techniques involves representing the underlying inference problem as one of state space estimation, thus giving way to inference via particle filtering. The key insight of Carvalho et al was to construct the sequence of filtering distributions so as to make use of the posterior predictive distribution of the observable, a distribution usually only accessible in certain Bayesian settings. Access to this distribution allows a reversal of the usual propagate and resample steps characteristic of many SMC methods, thereby alleviating to a large extent many problems associated with particle degeneration. Furthermore, Carvalho et al point out that for many conjugate models the posterior distribution of the static variables can be parametrized in terms of [recursively defined] sufficient statistics of the previously observed data. For models where such sufficient statistics exist, particle learning as it is being called, is especially well suited for the analysis of streaming data do to the relative invariance of its algorithmic complexity with the number of data observations. Through a particle learning approach, a statistical model can be fit to data as the data is arriving, allowing at any instant during the observation process direct quantification of uncertainty surrounding underlying model parameters. Here we describe the use of a particle learning approach for fitting a standard Bayesian semiparametric mixture model as described in Carvalho, Lopes, Polson and Taddy. In Section 2 we briefly review the previously presented particle learning algorithm for the case of a Dirichlet process mixture of multivariate normals. In Section 3 we describe several novel extensions to the original implementation of Carvalho et al that allow us to retain the computational advantages of particle learning while improving the suitability of the methodology to the analysis of streaming data and simultaneously facilitating the real time discovery of latent cluster structures. Section 4 demonstrates our methodological enhancements in the context of several simulated and classical data sets, showcasing the use of particle learning methods for online anomaly detection, label generation, drift detection, and semi-supervised classification, none of which would be achievable through a standard MCMC approach. Section 5 concludes with a discussion of future directions for research.

99 GENERAL AND MISCELLANEOUS↗

Study on efficiency of time computation in x-ray imaging simulation base on Monte Carlo algorithm using graphics processing unit

Monte Carlo (MC) is one of the powerful techniques for simulation in x-ray imaging. MC method can simulate the radiation transport within matter with high accuracy and provides a natural way to simulate radiation transport in complex systems. One of the codes based on MC algorithm that are widely used for radiographic images simulation is MC-GPU, a codes developed by Andrea Basal. This study was aimed to investigate the time computation of x-ray imaging simulation in GPU (Graphics Processing Unit) compared to a standard CPU (Central Processing Unit). Furthermore, the effect of physical parameters to the quality of radiographic images and the comparison of image quality resulted from simulation in the GPU and CPU are evaluated in this paper. The simulations were run in CPU which was simulated in serial condition, and in two GPU with 384 cores and 2304 cores. In simulation using GPU, each cores calculates one photon, so, a large number of photon were calculated simultaneously. Results show that the time simulations on GPU were significantly accelerated compared to CPU. The simulations on the 2304 core of GPU were performed about 64 -114 times faster than on CPU, while the simulation on the 384 core of GPU were performed about 20 – 31 times faster than in a single core of CPU. Another result shows that optimum quality of images from the simulation was gained at the history start from 10{sup 8} and the energy from 60 Kev to 90 Kev. Analyzed by statistical approach, the quality of GPU and CPU images are relatively the same.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

How Bayesian methods can improve R -matrix analyses of data: The example of the d t reaction

The 3 H(d, n) 4 He reaction is of significant interest in nuclear astrophysics and nuclear applications. It is an important, early step in big-bang nucleosynthesis and a key process in nuclear fusion reactors. We use one- and two-level R-matrix approximations to analyze data on the cross section for this reaction at center-of-mass energies below 215 keV. We critically examine the data sets using a Bayesian statistical model that allows for both common-mode and additional point-to-point un- certainties. We use Markov Chain Monte Carlo sampling to evaluate this R-matrix-plus-statistical model and find two-level R-matrix results that are stable with respect to variations in the channel radii. The S factor at 40 keV evaluates to 25.36(19) MeV b (68% credibility interval). We discuss our Bayesian analysis in detail and provide guidance for future applications of Bayesian methods to R-matrix analyses. We also discuss possible paths to further reduction of the S-factor uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing Blazar Emission Processes with Optical/Gamma-Ray Flare Correlations

We report that even with several thousand Fermi-Large Area Telescope (LAT) blazar detections, the γ-ray emission mechanism is poorly understood. We explore correlated optical/γ-ray flux variations for 178 Fermi-LAT blazars regularly monitored by the Katzman Automatic Imaging Telescope, the Small and Moderate Aperture Research Telescope System, and the Steward Observatory. Out of the 178 sources, 121 show a measurable (>1σ) discrete correlation function peak. Using the derived time lags and Bayesian block light-curve decompositions, we measure the fraction of common and orphan flares between the two bands. After accounting for sampling and sensitivity limitations we quantify for the first time the true orphan flare rates of optical and γ-ray flares: 54.5% of optical and 20% of γ-ray flares are orphan events. Both the intraband temporal relation and the small orphan γ-ray flare fraction point toward leptonic processes as the likely mechanisms for the high-energy emission. Motivated to discriminate between synchrotron self-Compton (SSC) and external-Compton dominance in individual sources, we use the flux–flux variations to determine the slope m of the log f opt –log f γ dependence. The slope distribution suggests a bimodal population with high and intermediate synchrotron peak objects showing larger m than low synchrotron peak objects. We find that m is naturally decreased through pollution from the orphan (typically optical) flares and develop a method to statistically recover, given the sources' measured orphan flare rate, the intrinsic m. Finally, while source classes show composite behavior, the majority of BL Lac objects favor m = 2, indicating an SSC origin for the γ-rays. No preference for either m is found in flat spectrum radio quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

Methods for Quantifying the Uncertainties of LSIT Test Parameters, Test Results, and Full-Scale Mixing Performance Using Models Developed from Scaled Test Data

This report discusses the statistical methods for quantifying uncertainties in 1) test responses and other parameters in the Large Scale Integrated Testing (LSIT), and 2) estimates of coefficients and predictions of mixing performance from models that relate test responses to test parameters. Testing at a larger scale has been committed to by Bechtel National, Inc. and the U.S. Department of Energy (DOE) to “address uncertainties and increase confidence in the projected, full-scale mixing performance and operations” in the Waste Treatment and Immobilization Plant (WTP).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hot-melt extrudability of amorphous solid dispersions of flubendazole-copovidone: An exploratory study of the effect of drug loading and the balance of adjuvants on extrudability and dissolution

The FDA-approved anthelmintic flubendazole has shown potential to be repositioned to treat cancer and dry macular degeneration; however, its poor water solubility limits its use. Amorphous solid dispersions may overcome this challenge, but the balance of excipients may impact the preparation method and drug release. Here, we evaluate the influence of adjuvants and drug loading on the development of an amorphous solid dispersion of flubendazole-copovidone by hot-melt extrusion. The drug, copovidone, and adjuvants (magnesium stearate and hydroxypropyl cellulose) mixtures were statistically designed, and the process was performed in a twin-screw extruder. The study showed that flubendazole and copovidone mixtures were highly extrudable, except when drug loading was high (>40%). Furthermore, magnesium stearate positively impacted the extrusion and was more effective than hydroxypropyl cellulose. The extruded materials were evaluated by modulated differential scanning calorimetry and X-ray powder diffraction, obtaining positive amorphization and physical stability results. Pair distribution function analysis indicated the presence of drug rich domains with medium-range order structure and no evidence of polymer-drug interaction. All extrudates presented faster dissolution (HCl, pH 1.2) than pure flubendazole, and both adjuvants had a notable influence on the dissolution rate. In conclusion, hot-melt extrusion may be a viable option to obtain stable flubendazole: copovidone amorphous dispersions.

60 APPLIED LIFE SCIENCES↗

GPU accelerated simulations of 3D deterministic particle transport using discrete ordinates method

Graphics Processing Unit (GPU), originally developed for real-time, high-definition 3D graphics in computer games, now provides great faculty in solving scientific applications. The basis of particle transport simulation is the time-dependent, multi-group, inhomogeneous Boltzmann transport equation. The numerical solution to the Boltzmann equation involves the discrete ordinates (S{sub n}) method and the procedure of source iteration. In this paper, we present a GPU accelerated simulation of one energy group time-independent deterministic discrete ordinates particle transport in 3D Cartesian geometry (Sweep3D). The performance of the GPU simulations are reported with the simulations of vacuum boundary condition. The discussion of the relative advantages and disadvantages of the GPU implementation, the simulation on multi GPUs, the programming effort and code portability are also reported. The results show that the overall performance speedup of one NVIDIA Tesla M2050 GPU ranges from 2.56 compared with one Intel Xeon X5670 chip to 8.14 compared with one Intel Core Q6600 chip for no flux fixup. The simulation with flux fixup on one M2050 is 1.23 times faster than on one X5670.

97 MATHEMATICS AND COMPUTING↗

Predicting CO 2 Plume Migration in Heterogeneous Formations Using Conditional Deep Convolutional Generative Adversarial Network

Numerical simulation of flow and transport in heterogeneous formations has long been studied, especially for uncertainty quantification and risk assessment. The high computational cost associated with running large-scale numerical simulations in a Monte Carlo sense has motivated the development of surrogate models, which aim to capture the important input-output relations of physics-based models but require only a fraction of the cost of full model runs. In this work, we formulate a conditional deep convolutional generative adversarial network (cDC-GAN) surrogate model to learn the dynamic functional mappings in multiphase models. The cDC-GAN belongs to a class of semisupervised learning methods that can be used to learn the data generation processes. Like the original GAN, a main strength of the cDC-GAN is that it includes a self-training scheme for improving the quality of generative modeling in a game theoretic framework, without requiring extensive statistical knowledge and assumptions on input data distributions. In particular, our cDC-GAN model is designed to learn cross-domain mappings between high-dimensional input (e.g., permeability) and output (e.g., phase saturations) pairs, with the ability to incorporate conditioning information (e.g., prediction time). As a use case, we demonstrate the performance of cDC-GAN for predicting the migration of carbon dioxide (CO 2 ) plume in heterogeneous carbon storage reservoirs, which has both numerical and practical significance because of the safe storage requirements now mandated in many countries. Results show that cDC-GAN achieves high accuracy in predicting the spatial and temporal evolution patterns of the injected CO 2 plume, as compared to the original results obtained using a compositional reservoir simulator. The performance of cDC-GAN models, trained using the same number of training samples, stays relatively robust when the level of spatial heterogeneity is increased. Our cDC-GAN is pattern based and is not limited by the underlying physics. Thus, it provides a general framework for developing surrogate models, and for conducting uncertainty analyses for a wide range of physics-based models used in both groundwater and subsurface energy exploration applications.

54 ENVIRONMENTAL SCIENCES↗

Using the optimal combined index weight ratio to improve the probability of anomaly detection in big area additive manufacturing

Big Area Additive Manufacturing (BAAM) of composites requires significant time, energy, and material, so it is critical to reduce production inefficiencies to make functional parts without multiple iterations. Statistical process control coupled with Principal Component Analysis (PCA) is a powerful technique that provides a quick, computationally inexpensive, and intuitive way for operators to detect defects that form in a manufacturing process without massive datasets. Recently, a combined index that is a weighted sum of the Hotelling's T 2 and squared residual error statistics has been proposed that can be monitored in one chart, improving interpretation accuracy and simplicity. However, the literature does not offer a formal method to optimise the weights. Here, we introduce two new approaches to the traditional weight selection approach using simulated and BAAM image data. Approach 1 uses a theoretically motivated optimum inspired by probabilistic principal component analysis. Approach 2 systematically varies the ratio of the weights to find the optimum. We show that approach 1 delivers optimal anomaly detection performance in select cases while approach 2 fares better in practice. Surprisingly, we also show that choosing a more complex PCA model has a minimal negative impact on anomaly detection performance compared to a more simplistic model.

3-dimensional printing↗

EVALUATING CONCENTRATION PROFILES DURING UNSTEADY MIXING

Pulse jet mixing tests to suspend noncohesive solids in Newtonian liquid were conducted at three geometric scales. To understand the solids suspension process an ultrasonic concentration probe was used to measure the concentration of solids in the cloud during a pulse at various elevations and radial positions. The data are being analyzed to provide a model for predicting concentration as a function of elevation. This paper presents a simple single frequency ultrasonic measurement application that demonstrates the ability of ultrasonic sensors to measure slurry concentration based on signal attenuation. Sensor calibration data show that ultrasonic signal attenuation is proportional to the applied frequency and to the slurry volume fraction. Real-time measurements of ultrasonic signal attenuation were used to track the process of slurry mixing using single sensors and sensor arrays. Comparison of means of the ultrasonic measurements with means obtained from discrete extractive measurements show that the distributions overlap and cannot be statistically distinguished. The real-time ultrasonic sensor can be used as a primary measurement method or to reduce reliance upon extractive methods to measure slurry density.

42 ENGINEERING↗

PARAMETER ESTIMATION OF THE EXPONENTIALLY DAMPED SINUSOID FOR NOISY SIGNALS

The damped sinusoid equation is a common model for many scientific processes involving damped periodic signals. Here we present two methods for estimating the damped sinusoid parameters for noisy signals. Both methods are based upon an exact, closed form solution to fit the parameters for signals without noise, and they estimate the parameters for the noisy signals by the statistical maximum likelihood criterion. The first method relies on an optimizer to minimize the mean square signal error. The second method estimates the parameters by direct calculation and is suitable when the signal noise is small and the frequencies are sufficiently far from the integer and half integer values.

Pelaia, II, Tom↗