Search NASA⌕ Search

SEARCH · Search NASA

Results for “summary data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Study of a tracking and data acquisition system for the 1990's. Volume 1: User community characteristics

Projected 1990's experiments; navigation requirements and potentials; communications requirements associated with space experiments; alternative forecast options; and operational impacts on experiments are covered. A baseline of plans for the TDAS User Community, including a set of generic experiments developed to supplement existing planning for the 1990's time frame is generated. It includes extensive summaries of collected data, and a bibliography. The data are representative of inputs obtained from NASA planning sources through September 1981.

Mccreary, T.↗
NASA NTRS1991

The evolution of synthetic aperture radar systems and their progression to the EOS SAR

The authors describe the evolution of the spaceborne imaging radar starting with the Seasat SAR, through the SIR-A, SIR-B, and SIR-C/X-SAR missions, to the Earth Observing System (EOS) SAR which is scheduled for launch as part of EOS in the late 1990s. A summary of the planned international missions, which may produce a permanent active microwave capability in space starting as early as 1991, is also presented, along with a description of the airborne systems which will be essential to the algorithm development and long-term calibration of the spaceborne data. A brief summary of the planetary missions utilizing SAR and a comparison of their imaging capabilities with those available on Earth are presented.

Way, Jobea↗
NASA NTRS2007

Infrared Camera Characterization of Bi-Propellant Reaction Control Engines during Auxiliary Propulsion Systems Tests at NASA's White Sands Test Facility in Las Cruces, New Mexico

This paper describes the application of a FUR Systems A40M infrared (IR) digital camera for thermal monitoring of a Liquid Oxygen (LOX) and Ethanol bi-propellant Reaction Control Engine (RCE) during Auxiliary Propulsion System (APS) testing at the National Aeronautics & Space Administration's (NASA) White Sands Test Facility (WSTF) near Las Cruces, New Mexico. Typically, NASA has relied mostly on the use of ThermoCouples (TC) for this type of thermal monitoring due to the variability of constraints required to accurately map rapidly changing temperatures from ambient to glowing hot chamber material. Obtaining accurate real-time temperatures in the JR spectrum is made even more elusive by the changing emissivity of the chamber material as it begins to glow. The parameters evaluated prior to APS testing included: (1) remote operation of the A40M camera using fiber optic Firewire signal sender and receiver units; (2) operation of the camera inside a Pelco explosion proof enclosure with a germanium window; (3) remote analog signal display for real-time monitoring; (4) remote digital data acquisition of the A40M's sensor information using FUR's ThermaCAM Researcher Pro 2.8 software; and (5) overall reliability of the system. An initial characterization report was prepared after the A40M characterization tests at Marshall Space Flight Center (MSFC) to document controlled heat source comparisons to calibrated TCs. Summary IR digital data recorded from WSTF's APS testing is included within this document along with findings, lessons learned, and recommendations for further usage as a monitoring tool for the development of rocket engines.

Holleman, Elizabeth↗
DOE OSTI2016

The clustering of galaxies in the completed SDSS-III Baryon Oscillation Spectroscopic Survey: Double-probe measurements from BOSS galaxy clustering and Planck data – towards an analysis without informative priors

Here, we develop a new methodology called double-probe analysis with the aim of minimizing informative priors in the estimation of cosmological parameters. We extract the dark-energy-model-independent cosmological constraints from the joint data sets of Baryon Oscillation Spectroscopic Survey (BOSS) galaxy sample and Planck cosmic microwave background (CMB) measurement. We measure the mean values and covariance matrix of {R, l a , Ω b h 2 , n s , log(A s ), Ω k , H(z), D A (z), f(z)σ 8 (z)}, which give an efficient summary of Planck data and 2-point statistics from BOSS galaxy sample, where R = √Ω m H 2 0 , and l a = πr(z * )/r s (z * ), z * is the redshift at the last scattering surface, and r(z * ) and r s (z * ) denote our comoving distance to z * and sound horizon at z * respectively. The advantage of this method is that we do not need to put informative priors on the cosmological parameters that galaxy clustering is not able to constrain well, i.e. Ω b h 2 and n s . Using our double-probe results, we obtain Ω m = 0.304 ± 0.009, H 0 = 68.2 ± 0.7, and σ 8 = 0.806 ± 0.014 assuming ΛCDM; and Ω k = 0.002 ± 0.003 and w = –1.00 ± 0.07 assuming owCDM. The results show no tension with the flat ΛCDM cosmological paradigm. By comparing with the full-likelihood analyses with fixed dark energy models, we demonstrate that the double-probe method provides robust cosmological parameter constraints which can be conveniently used to study dark energy models. We extend our study to measure the sum of neutrino mass and obtain Σm ν < 0.10/0.22 (68%/95%) assuming ΛCDM and Σm ν < 0.26/0.52 (68%/95%) assuming wCDM. This paper is part of a set that analyses the final galaxy clustering dataset from BOSS.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2004

Habitability of the Shallow Subsurface on Mars: Clues from the Meteorites

The properties that define habitability are commonly understood to include the following: - Presence of water. - Temperature range allowing some or all of the water to be liquid. - A suitable physical volume or space permitting metabolism and growth. - Presence of organic compounds or the building blocks to make them. - Presence of an energy source suitable for utilization by living organisms. Interpretations of Mars Viking, Surveyor, and Odyssey orbital images have built a strong case that Mars had surface water during its past geological history. Neutron spectrometer data from Mars Odyssey show that poleward of about 60 degrees North and 60 degrees south, significant hydrogen, likely as ice or permafrost, is present in at least the upper meter or so of the Martian regolith and crust and that similar high hydrogen areas exist, even near the equator. Here we present a summary of independent data from the Mars meteorites showing that liquid water was present for at least some of the time in the upper few meters or tens of meters as early as 3.9 billion years (Ga), and was present at intervals and at various locations throughout most of Mars history.

David S McKay↗
DOE OSTI2015

Exploratory Data analysis ENvironment eXtreme scale (EDENx)

EDENx is a multivariate data visualization tool that allows interactive user driven analysis of large-scale data sets with high dimensionality. EDENx builds on our earlier system, called EDEN to enable analysis of more dimensions and larger scale data sets. EDENx provides an initial overview of summary statistics for each variable in the data set under investigation. EDENx allows the user to interact with graphical summary plots of the data to investigate subsets and their statistical associations. These plots include histograms, binned scatterplots, binned parallel coordinate plots, timeline plots, and graphical correlation indicators. From the EDENx interface, a user can select a subsample of interest and launch a more detailed data visualization via the EDEN system. EDENx is best suited for high-level, aggregate analysis tasks while EDEN is more appropriate for detail data investigations.

Steed, Chad Allen↗
DOE OSTI2025

MODE: A Web Application for Interactive Visualization and Exploration of Omics Data

Studies generating transcriptomics, proteomics, lipidomics, and metabolomics (colloquially referred to as “omics”) data allow researchers to find biomarkers or molecular targets, or understand complex biological structures and functions by identifying changes in biomolecule abundance and expression between experimental conditions. Omics data is multi-dimensional and oftentimes summarization techniques such as principal component analysis (PCA) are used to identify high-level patterns in data. Though useful, these summaries don’t allow exploration of detailed patterns in omics data that may have biological relevance. The use of interactive HTML displays with plots allows researchers to interact with omics data at a detailed level, but building these displays requires significant coding expertise. To overcome this barrier, the software MODE was built to empower users to build their own interactive HTML displays to support scientific discovery. These displays are easily shareable, do not depend on a specific operating system, and allow users to effortlessly sort and filter plots by categorical or numerical variables. MODE allows users to build and share these displays with several options for plot design and meta selection. In conclusion, the MODE web application and its capabilities are presented and then demonstrated on lipidomics data from a leaf wounding study.

lipidomics↗
NASA NTRS1982

NASA participation in the 1980 PEPE/NEROS project: Data archive

Eight experimental air quality measurement systems were investigated during July and August 1980 as part of the EPA PEPE/NEROS fiel measurement program. Data from those efforts have been entered into an archive that may be accessed by other researchers. The data sets consists of airborne measurements of regional mixed layer heights and aerosol and ozone distributions as well as point measurements of meteorological parameters and ozone obtained during diurnal transitions in the planetary boundary layer. This report gives a discussion of each measurement system, a preliminary assessment of data quality, a description of the archive format for each data set, and a summary of several proposed scientific studies which will utilize these data.

Brewer, D. A.↗
NASA NTRS1992

Long Duration Exposure Facility (LDEF) low-temperature Heat Pipe Experiment Package (HEPP) flight results

The Low Temperature Heat Pipe Flight Experiment (HEPP) is a fairly complicated thermal control experiment that was designed to evaluate the performance of two different low temperature ethane heat pipes and a n-Heptane Phase Change Material (PCM) canister. A total of 388 days of continuous operation with an axially grooved aluminum fixed conductance heat pipe of axially grooved stainless steel heat pipe diode was demonstrated before the EDS batteries lost power. The inability of the HEPP's radiator to cool below 190 K in flight prevented freezing of the PCM and the opportunity to conduct transport tests with the heat pipes. Post flight tests showed that the heat pipes and the PCM are still functioning. This paper presents a summary of the flight data analysis for the HEPP and its related support systems. Pre and post-flight thermal vacuum tests results are presented for the HEPP thermal control system along with individual heat pipe performance and PCM behavior. Appropriate SIG related systems data will also be included along with a 'lessons learned' summary.

Mcintosh, Roy↗
NASA NTRS1981

A compilation of unsteady turbulent boundary-layer experimental data

An extensive literature search was conducted and those experiments related to unsteady boundary layer behavior were cataloged. In addition, an international survey of industrial, university, and governmental research laboratories was made in which new and ongoing experimental programs associated with unsteady turbulent boundary layer research were identified. Pertinent references were reviewed and classified based on the technical emphasis of the various experiments. Experiments that include instantaneous or ensemble averaged profiles of boundary layer variables are stressed. The experimental apparatus and flow conditions are described and summaries of acquired data and significant conclusions are summarized. Measurements obtained from the experiments which exist in digital form were stored on magnetic tape. Instructions are given for accessing these data sets for further analysis.

Carr, L. W.↗
NASA NTRS1990

Bio-optical profile data report: Joint Global Ocean Flux Study, Hawaii Ocean Time-Series, HOT-3, R/V Moana Wave, 6-10 January 1989

Time-series measurements of the incident surface downwelling irradiance and vertical profiles of the Bio-optical properties of the ocean have been measured during the third cruise of the Hawaii Ocean Time-Series to the ALOHA site, 22 degrees 56.4 minutes N, 157 degrees 54.6 minutes W, north of the island of Oahu, Hawaii, during the period January 6 to 10, 1989. A summary of these data is presented to permit investigators an overview of the data collected. The data are available in digital form for scientific investigators.

Collins, Donald J.↗
NASA NTRS1981

Applications systems verification and transfer project. Volume 1: Operational applications of satellite snow cover observations: Executive summary

Both LANDSAT and NOAA satellite data were used in improving snowmelt runoff forecasts. When the satellite snow cover data were tested in both empirical seasonal runoff estimation and short term modeling approaches, a definite potential for reducing forecast error was evident. A cost benefit analysis run in conjunction with the snow mapping indicated a $36.5 million annual benefit accruing from a one percent improvement in forecast accuracy using the snow cover data for the western United States. The annual cost of employing the system would be $505,000. The snow mapping has proven that satellite snow cover data can be used to reduce snowmelt runoff forecast error in a cost effective manner once all operational satellite data are available within 72 hours after acquisition. Executive summaries of the individual snow mapping projects are presented.

Rango, A.↗
NASA NTRS2001

ROSAT Science Data Center

This report provides a summary of the Smithsonian Astrophysical Observatory (SAO) ROSAT SCIENCE DATA CENTER (RSDC) activities for the recent years of our contract. Details have already been reported in the monthly reports. The SAO was responsible for the High Resolution Imager (HRI) detector on ROSAT. We also provided and supported the HRI standard analysis software used in the pipeline processing (SASS). Working with our colleagues at the Max Planck in Garching Germany (MPE), we fixed bugs and provided enhancements. The last major effort in this area was the port from VMS/VAX to VMS/ALPHA architecture. In 1998, a timing bug was found in the HRI standard processing system which degraded the positional accuracy because events accessed incorrect aspect solutions. The bug was fixed and we developed off-line correction routines and provided them to the community. The Post Reduction Off-line Software (PROS) package was developed by SAO and runs in the IRAF environment. Although in recent years PROS was not a contractual responsibility of the RSDC, we continued to maintain the system and provided new capabilities such as the ability to deal with simulated AXAF data in preparation for the NASA call for proposals for Chandra. Our most recent activities in this area included the debugging necessary for newer versions of IRAF which broke some of our software. At SAO we have an operating version of PROS and hope to release a patch even though almost all functionality that was lost was subsequently recovered via an IRAF patch (i.e. most of our problems were caused by an IRAF bug).

Murray, Stephen↗
NASA NTRS2017

Preparation of the NASA Air Quality Monitor for a U.S. Navy Submarine Sea Trial

For the past 4 years, the Air Quality Monitor (AQM) has been the operational instrument for measuring trace volatile organic compounds on the International Space Station (ISS). The key components of the AQM are the inlet preconcentrator, the gas chromatograph (GC), and the differential mobility spectrometer. Onboard the ISS are two AQMs with different GC columns that detect and quantify 22 compounds. The AQM data contributes valuable information to the assessment of air quality aboard ISS for each crew increment. The US Navy is looking to update its submarine air monitoring suite of instruments and the success of the AQM on ISS has led to a jointly planned submarine sea trial of a NASA AQM. In addition to the AQM, the Navy is also interested in the Multi-Gas Monitor (MGM), which measures major constituent gases (oxygen, carbon dioxide, water vapor, and ammonia). A separate paper will present the MGM sea trial preparation and the analysis of most recent ISS data. A prototype AQM, which is virtually identical to the operational AQM, has been readied for the sea trial. Only one AQM will be deployed during the sea trial, but this is sufficient for NASA purposes and to detect the compounds of interest to the US Navy for this trial. The data from the sea trial will be compared to data from archival samples collected before, during, and after the trial period. This paper will start with a brief history of past collaborations between NASA and the U.S. and U.K. navies for trials of air monitoring equipment. An overview of the AQM technology and protocols for the submarine trial will be presented. The majority of the presentation will focus on the AQM preparation and a summary of available data from the trial.

Limero, Thomas↗
NASA NTRS2021

Improved Estimates of Pentad Precipitation through the Merging of Independent Precipitation Datasets

Three independent, quasi-global, gridded datasets of precipitation (a rain gauge-based dataset, the satellite-only component of the NASA Integrated Multi-satellitE Retrievals for Global Precipitation Measurement mission [IMERG] Final Run precipitation product, and precipitation estimates derived from NASA Soil Moisture Active Passive [SMAP] soil moisture retrievals), are objectively combined into a single pentad precipitation dataset at 36-km resolution using a unique approach based on extended triple collocation. The quality of each of the four datasets is then evaluated against independent observations. When a global land surface model at 36-km resolution is integrated four times, once utilizing the merged precipitation forcing and once with each of the three contributing datasets, the near-surface soil moisture variations produced with the merged forcing validate best against independent satellite-based soil moisture fields. In addition, the merged dataset is found to be more consistent, relative to each contributor, with estimates of air temperature variations across the globe. The merged dataset thus appears to draw successfully on the complementary strengths of each contributor: the particularly high quality of the rain gauge-based dataset in areas of high gauge density, the more uniform accuracy across the globe of the IMERG data, and the moderate accuracy, particularly in semi-arid regions, of the soil moisture retrieval-based data. Plain Language Summary Obtaining measurements of precipitation across the globe can be challenging. Rain gauges in some ways provide the most accurate measurements, but gauges are absent in many parts of the world, and even where they exist, they only measure precipitation at the gauge itself and therefore may not provide an accurate large-scale average. Satellite-based estimates of precipitation largely overcome these problems, but such data have their own issues, notably a “snapshot” (rather than a time-average) character of the measurements and difficulty associated with interpreting the measured radiances in the presence of complex land surfaces. In the present paper, we use a novel approach to generate a “merged” dataset, one that optimally combines the gauge precipitation information and the satellite-based precipitation information with a third set of estimates derived from soil moisture retrievals. The merged precipitation dataset and each of the three contributors (aggregated here to 5-day averages at a spatial resolution of about 36-km) are then evaluated for consistency with independent geophysical fields. The merged dataset is found to perform best, a clear indication that it takes proper advantage of the complementary strengths of each contributor and, accordingly, that the presented approach for merging the different contributors is indeed viable.

Precipitation↗
DOE OSTI2017

Assessment of the Idaho National Laboratory Remote Handled Low Level Waste Disposal Facility Hydraulic Performance

This document provides a summary of the expected hydraulic performance of the vault drainage system installed at Idaho National Laboratory’s Remote Handled Low-Level Waste disposal facility. Hydraulic performance was assessed through analysis of the mechanical properties of the drainage system and backfill materials, including material gradation and proctor data; laboratory data, including bulk density, porosity, unsaturated hydraulic conductivity, moisture-retention data, and van Genuchten parameters; and field-data collected using in-situ instrumentation with data collected during a vault-scale infiltration characterization test. Hydraulic performance of the vault drainage system was designed to promote a greater than 500-year vault concrete longevity. The predicted hydraulic performance is, in part, a function of the materials used in construction, sequencing of the hydraulic drainage materials, and the as-built condition of the materials following compaction necessary to ensure vault stability. Specifying specific as-built hydraulic properties is exceedingly difficult at the facility specification/design phase. Instead, material mechanical properties were specified and confirmed early during the construction process. As the drainage materials were installed, samples were sent to a laboratory for hydraulic property testing and, after drainage system installation was complete around the performance assessment vaults, a field-scale infiltration test was conducted with data collection to verify the as-built hydraulic performance. This report provides summary data for the measured mechanical properties, laboratory data, and field infiltration characterization test data. Mechanical data have relatively little variability because of the sieve system used when the materials were crushed onsite. Laboratory data were obtained for a relatively small number of material samples, but the data obtained for each sample are extensive. However, laboratory data provide the moisture retention relationships and relative hydraulic conductivity-moisture content relationships for uninstalled materials. Conducting field-scale infiltration tests with collection of moisture retention data and wetting front propagation data allows extension of laboratory data to the as-installed conditions of the vault drainage system. These combined data types are integrated using a numerical simulation of the infiltration characterization test to refine model parameters. The infiltration characterization model will be used to support the hydraulic and concrete performance of the vault system provided in the facility performance assessment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1999

PCA/HEXTE Observations of M82 and NGC253

The nearby starburst galaxies M82 & NGC 253 were observed by the RXTE satellite during the period February - November 1997. Data reduction and analysis began in summer 1998, and continued through March 1999. The spectral analysis indicates that the main emission in these galaxies is from hot gas. We find a considerable degree of variability in the emission from M82, possibly due to M81 (a known AGN) in the FOV. The main spectral parameters were determined for both sources. The results of the analysis were reported in the March 1999 meeting of the AAS. Summary of the data analysis, theoretical modeling, and interpretation will be presented in a paper which is currently being prepared for publication in the Astrophysical Journal.

Rephaeli, Yoel↗