Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

On the Dielectric Properties of the Martian-like Surface Sediments

We have undertaken laboratory electromagnetic characterization of the total set of minerals identified by TES on the Martian surface in order to investigate experimentally the dielectric properties of the sediments covering it in the frequency range from 1 to 30 MHz. Volcanic Rocks with a well defined mineralogy and petrology from potential terrestrial analogues sites have also been included in the study. Our primary objective is to evaluate the range of electrical and magnetic losses that may be encountered by the various Radar sounding and imaging experiments dedicated to map the Martian subsurface searching for underground water. The electromagnetic properties of these Mars-like materials will be presented as a function of various geophysical parameters, such as porosity, bulk density and temperature. The secondary objective, is to locate regions were surface dielectric conditions are suitable for subsurface sounding.

Heggy, E.↗

Distribution of Inclusion-Initiated Fatigue Cracking in Powder Metallurgy Udimet 720 Characterized

In the absence of extrinsic surface damage, the fatigue life of metals is often dictated by the distribution of intrinsic defects. In powder metallurgy (PM) alloys, relatively large defects occur rarely enough that a typical characterization with a limited number of small volume fatigue test specimens will not adequately sample inclusion-initiated damage. Counterintuitively, inclusion-initiated failure has a greater impact on the distribution in PM alloy fatigue lives because they tend to have fewer defects than their cast and wrought counterparts. Although the relative paucity of defects in PM alloys leads to higher mean fatigue lives, the distribution in observed lives tends to be broader. In order to study this important failure initiation mechanism without expending an inordinate number of specimens, a study was undertaken at the NASA Glenn Research Center where known populations of artificial inclusions (seeds) were introduced to production powder. Fatigue specimens were machined from forgings produced from the seeded powder. Considerable effort has been expended in characterizing the crack growth rate from inclusion-initiated cracks in seeded PM alloys. A rotating and translating positioning system, with associated software, was devised to map the surface inclusions in low-cycle fatigue (LCF) test bars and to monitor the crack growth from these inclusions. The preceding graph illustrates the measured extension in fatigue cracks from inclusions on a seeded LCF test bar subjected to cyclic loading at a strain range of 0.8 percent and a strain ratio (max/min) of zero. Notice that the observed inclusions fall into three categories: some do not propagate at all (arrest), some propagate with a decreasing crack growth rate, and a few propagate at increasing rates that can be modeled by fracture mechanics. The following graph shows the measured inclusion-initiated crack growth rates from 10 interrupted LCF tests plotted against stress intensities calculated for semi-elliptical cracks with the observed surface lengths. The expected scatter in the crack growth rates for stress intensity ranges near threshold is observed. These data will be used to help determine the distribution in growth rates of cracks emanating from inclusions as well as the proportion of cracks that arrest under various loading conditions.

Bonacuse, Peter J.↗

A Preliminary Assessment of Cognition and Fatigue During Simulated Lunar Surface Extravehicular Activities

Introduction: Artemis astronauts will be required to complete more rigorous Extravehicular Activity (EVA) schedules than during ever before. While new spacesuits are designed to sustain high physical workloads during exploration EVAs (xEVA), crewmembers must also sustain cognitive performance throughout xEVA timelines. It is therefore necessary to characterize the effects of surface xEVA tasks and timelines on cognition and fatigue. Methods: This study utilized NASA Johnson Space Center’s Active Response Gravity Offload System (ARGOS) to simulate lunar gravity and assess xEVA tasks and cognitive performance. Two subjects completed two ~5-hour EVAs in a pressurized Mark III spacesuit, completing simulated lander operations, cable routing, crew rescue, geology, payload relocation, and traverses. Subjects completed two cognitive assessments (Digit-Symbol Substitution Task (DSST) and Psychomotor Vigilance Task (PVT)) before the first and after the second simulated EVA to assess effects of xEVA tasks on processing speed and vigilant attention. Additionally, sleep (e.g., quality, duration, and efficiency) was monitored (Oura Ring) for ≥7 days prior to the simulated EVAs, as well as between each EVA, to account for possible effects of sleep decrements on cognitive metrics. Results: Cognitive performance changed minimally from pre to post EVA for both DSST (response time (RT): S1 Δ129.1ms, S2 Δ40.7ms; Accuracy: S1 preEVA = 1.0, S1 postEVA = 0.98, S2 preEVA = 1.0, S2 postEVA = 1.0) and PVT (S1 PVT RT Δ17.7 ms, S2 PVT RT Δ-2.7 ms). Subjects’ sleep duration immediately prior to EVA showed minimal deviation from baseline (Δhrs; S1 preEVA1= + 0.67, S1 preEVA2 = -.03, S2 preEVA1 = - 1.1, S2 preEVA2 = -1.39) and efficiency (Δ%; S1 preEVA1 = 0.09, S1 preEVA2 = 9.54, S2 preEVA1 = 0, S2 preEVA2= 12). Notably, sleep waketime shifted earlier for one subject by ~1 hr which may have impacted performance. Conclusion: Understanding the impacts of xEVA workloads on cognitive performance will be instrumental to future exploration mission planning and success. Future work will expand the subject pool and test new spacesuit designs to better characterize cognitive performance and impacts of sleep during simulated xEVA and inform modeling and prediction capabilities for future Artemis xEVA planning.

Taylor E. Schlotman↗

The characterization of facsimile camera systems for lunar and planetary surface exploration

Advantages of facsimile camera systems are reviewed for imagery of lunar and planetary surfaces from stationary or stopped remotely controlled vehicles. They include: better geometric fidelity than television systems, more picture elements per frame, ability to take single frame panoramic pictures, a very high contrast ratio within a picture, a choice of one or more narrow-band spectral responses over a wide possible range, image transmission over a low bit-rate communications channel without storage, very low power, small size, low weight, and ruggedizability to meet space flight requirements. Systems of this kind are under development for the 1975 Viking Martian lander, and have been used by the Soviets on Lunas and Lunokhod laboratory and field evaluation of a completed facsimile camera system is presented. The applicability of facsimile cameras to lunar and planetary rovers is demonstrated.

Eisenman, A.↗

Theoretical characterization of selected regions of the ground state potential surface of N2H2

The results of CASSCF/multireference contracted CI calculations with large atomic natural orbital basis sets are presented for selected regions of the N2H2 potential surface. The calculations focused on the addition of an H atom to HN2. This process involves four channels. Approach of the H atom along the HN bond leads to N2 + H2 with no barrier (H abstraction), while approach of the H atom to the other three positions leads to trans-HNNH, cis-HNNH, and NNH2, which are stable minima. These calculations provide the most accurate energetics for these three stable species obtained to date. Combining the results of these calculations with previous results for HN2 provides accurate thermochemical data on these important molecules.

Walch, Stephen P.↗

Microbial Characterization of Internal Active Thermal Control System (IATCS) Hardware Surfaces after Five Years of Operation in the International Space Station

A flex hose assembly containing aqueous coolant from the International Space Station (ISS) Internal Active Thermal Control System (IATCS) consisting of a 2 foot section of Teflon hose and quick disconnects (QDs) and a Special Performance Checkout Unit (SPCU) heat exchanger containing separate channels of IATCS coolant and iodinated water used to cool spacesuits and Extravehicular Mobility Units (EMUS) were returned for destructive analyses on Shuttle return to flight mission STS-114. The original aqueous IATCS coolant used in Node 1, the Laboratory Module, and the Airlock consisted of water, borate (pH buffer), phosphate (corrosion control), and silver sulfate (microbiological control) at a pH of 9.5 +/- 0.5. Chemical changes occurred after on-orbit implementation including a decrease to pH 8.4 due to the diffusion of carbon dioxide through the Teflon hoses, an increase in nickel ions due to general corrosion of heat exchanger braze coatings, a decrease in phosphate concentration due to precipitation of nickel phosphate, and the rapid disappearance of silver ions due to deposition on hardware surfaces. Also associated with the coolant chemistry changes was an increase in planktonic microorganisms from less than 100 colony forming units (CFU) per 100 ml to approximately 1 million CFU per 100 ml. Attachment and growth of microorganisms to the system surfaces (biofilm) was suspected due to the levels of planktonic microorganisms in the coolant. Biofilms can reduce coolant flow, reduce heat transfer, amplify degradation of system materials initiated by chemical corrosion, and enhance mineral scale formation.

Roman, Monsi C.↗

Preliminary micrometeoroid and debris effects on LDEF thermal control surfaces

Thermal control surfaces on the Long Duration Exposure Facility (LDEF) were exposed to 5.75 years of low-Earth orbit environments. Since LDEF was gravity gradient stabilized and directionally stable, the effects of each of the environments can be distinguished via changes in material responses to hypervelocity impacts. The extent of these effects are being visually and microscopically characterized using thermal control surfaces archived at Johnson Space Center in order to determine the the relationship between environment exposure and resulting ring sizes, delamination areas, and penetration diameters. The characterization of these affected areas will provide spacecraft system designers with the information they require to determine degradation of thermal control systems during satellite lifetimes.

Allbrooks, Martha K.↗

Small Radioisotope Power System Testing at NASA Glenn Research Center

In April 2009, NASA Glenn Research Center (GRC) formed an integrated product team (IPT) to develop a Small Radioisotope Power System (SRPS) utilizing a single Advanced Stirling Convertor (ASC) with passive balancer. A single ASC produces approximately 80 We making this system advantageous for small distributed lunar science stations. The IPT consists of Sunpower, Inc., to provide the single ASC with a passive balancer, The Johns Hopkins University Applied Physics Laboratory (JHUAPL) to design an engineering model Single Convertor Controller (SCC) for an ASC with a passive balancer, and NASA GRC to provide technical support to these tasks and to develop a simulated lunar lander test stand. The single ASC with a passive balancer, simulated lunar lander test stand, and SCC were delivered to GRC and were tested as a system. The testing sequence at GRC included SCC fault tolerance, integration, electromagnetic interference (EMI), vibration, and extended operation testing. The SCC fault tolerance test characterized the SCCs ability to handle various fault conditions, including high or low bus power consumption, total open load or short circuit, and replacing a failed SCC card while the backup maintains control of the ASC. The integrated test characterized the behavior of the system across a range of operating conditions, including variations in cold-end temperature and piston amplitude, including the emitted vibration to both the sensors on the lunar lander and the lunar surface. The EMI test characterized the AC and DC magnetic and electric fields emitted by the SCC and single ASC. The vibration test confirms the SCCs ability to control the single ASC during launch. The extended operation test allows data to be collected over a period of thousands of hours to obtain long term performance data of the ASC with a passive balancer and the SCC. This paper will discuss the results of each of these tests.

Vibration↗

A Conceptual Titan Orbiter Mission Using Advanced Radioisotope Power Systems

This study details a conceptual follow-on Titan orbiter mission that would provide full global topographic coverage. surface imaging, and meteorological characterization of the atmosphere over a nominal 5-year science mission duration. The baseline power requirement is approx.1 kWe at EOM and is driven by a high power radar instrument that would provide 3-dimensional measurements of atmospheric clouds, precipitation, and surface topography. While this power level is moderately higher than that of the Cassini spacecraft. higher efficiency advanced RPSs could potentially reduce the plutonium usage to less than 1/3rd of that used on the Cassini spacecraft. The Titan Orbiter mission is assumed to launch in 2015. It would utilize advanced RPSs to provide all on-board power.

radioisotope power systems (RPS)↗

Parameterization of Features on Spherical Surfaces

NASA’s Planetary Systems Laboratory (PSL) at the Goddard Spaceflight Center in Greenbelt, Maryland is tasked with the study of solar system objects. This work is frequently based on analysis of imagery from visiting spacecraft, orbiting telescopes, and ground-based sensors. A consequence of this mission is the need to characterize features on the spherical surface of planets and moons, such characterization including the overall area of the feature, its center, its moments of inertia, its perimeter, its compactness, its major axis, its bounding box, its aspect ratio and its North-South orientation. Accurate assessment of these measures from a “flat” two-dimensional image is a challenge, since the scale of distance observed at the center of a spherical object distorts in any direction towards the horizon. PSL has developed a technique to guarantee accurate and automated measurement at any point on the visible surface, by overlaying an imaginary grid of equal-area cells onto the two-dimensional image of the sphere. The technique is named Grid-Oriented Normalization for Analysis of Spherical Areas (GONASA). This paper discusses the construction of the normalization grid and describes specific algorithms for feature parameterization. The algorithms are implemented in an accompanying Excel spreadsheet, both for clarity and ease of adoption, and to emphasize their aptness for automation. Finally, a concrete use case is offered where the GONASA grid and algorithms are used to characterize methane clouds on the Saturnian moon Titan.

Planetary science↗

Preliminary micrometeoroid and debris effects on LDEF thermal control surfaces

Thermal control surfaces returned from space exhibited synergistic effects of simultaneous exposure to various natural environments. The thermal control surfaces of the Long Duration Exposure Facility (LDEF) were exposed to 5.75 years of low Earth orbit environments. Since LDEF was gravity-gradient stabilized and directionally stable (i.e., no rotation), the effects of each of the environments (meteoroid and space debris impacts, thermal cycling, atomic oxygen, and ultraviolet light exposure) can be distinguished via changes in material responses to hypervelocity impacts. The extent of these impacts are being visually and microscopically characterized using thermal control surfaces archived at NASA Johnson Space Center (JSC) in order to determine the relationship between environment exposure and resulting ring sizes, delamination areas, and penetration diameters. The characterization of these affected areas will provide spacecraft system designers with the information they require to determine degradation of thermal control systems during satellite lifetimes.

Allbrooks, Martha K.↗

Sensitivity studies of nighttime top-of-atmosphere radiances from artificial light sources using a 3-D radiative transfer model for nighttime aerosol retrievals

By accounting for surface-based light source emissions and top-of-atmosphere (TOA) downward lunar fluxes, we adapted the spherical harmonics discrete ordinate method (SHDOM) 3-dimensional (3-D) radiative transfer model (RTM) to simulate nighttime 3-D TOA radiances as observed from the Visible Infrared Imaging Radiometer Suite (VIIRS) Day/Night Band (DNB) on board the Suomi-NPP satellite platform. Used previously for daytime 3-D applications, these new SHDOM enhancements allow for the study of the impacts of various observing conditions and aerosol properties on simulated VIIRS-DNB TOA radiances. Observations over Dakar, Senegal, selected for its bright city lights and a large range of aerosol optical depth (AOD), were investigated for potential applications and opportunities for using observed radiances containing VIIRS-DNB “bright pixels” from artificial light sources to conduct aerosol retrievals. We found that using the standard deviation (SD) of such bright pixels provided a more stable quantity for nighttime AOD retrievals than direct retrievals from TOA radiances. Further, both the mean TOA radiance and SD of TOA radiances over artificial sources are significantly impacted by satellite viewing angles. Light domes, the enhanced radiances adjacent to artificial light sources, are strong functions of aerosol properties and especially aerosol vertical distribution, which may be further utilized for retrieving aerosol layer height in future studies. Through inter-comparison with both day- and nighttime Aerosol Robotic Network (AERONET) data, the feasibility of retrieving nighttime AODs using 3-D RTM SHDOM over artificial light sources was demonstrated. Our study shows strong potential for using artificial light sources for nighttime AOD retrievals, while also highlighting larger uncertainties in quantifying surface light source emissions. This study underscores the need for surface light emission source characterizations as a key boundary condition, which is a complex task that requires enhanced input data and further research. We demonstrate how quality-controlled nighttime light data from NASA’s Black Marble product suite could serve as a primary input into estimations of surface light source emissions for nighttime aerosol retrievals.

Jianglong Zhang↗

Transitioning TEMPO Data for Air Quality Management Applications at the NASA SPoRT Center

The TEMPO mission has been observing air pollutants every hour during the daytime across its Field of Regard (FoR) covering greater North America since First Light on August 2, 2023. The highly anticipated public release of TEMPO data occurred on May 20, 2024, consisting of level 2 and level 3 trace gas data products of nitrogen dioxide, formaldehyde, and ozone. The NASA SPoRT Center is developing value-added products and tools to support the TEMPO mission and Early Adopters program with special attention on stakeholder from air agencies. One component of our work is focused on evaluating the TEMPO products over stakeholder target areas using Pandora and surface monitor observations to characterize the uncertainties and develop best practices for processing and analyzing TEMPO data. Methods for oversampling TEMPO data to 1 km resolution are being applied over the target areas to resolve fine-scale emission sources and pollutant gradients. Machine learning techniques using TEMPO, surface monitor, and model data to estimate surface-level nitrogen dioxide concentrations are being developed over the target areas. A SPoRT viewer for TEMPO has been launched for providing visualizations of the TEMPO products and an ArcGIS dashboard is being designed for enabling air agency stakeholders to efficiently analyze TEMPO data. Training materials including user guides are being developed to ensure the effective and sustained use of TEMPO data at our stakeholder agencies. One major goal of our TEMPO initiatives at SPoRT is to better enable the inclusion of TEMPO data in air quality management applications such as exceptional event demonstrations through our close engagement with stakeholders. This talk will provide an update on our SPoRT activities and showcase use cases of TEMPO data for monitoring different emission sources including wildland fire smoke.

Air Quality↗

How Well are Recent Climate Variability Signals Resolved by Satellite Radiative Flux Estimates?

One notable aspect of Earth s climate is that although the planet appears to be very close to radiative balance at top-of-atmosphere (TOA), the atmosphere itself and underlying surface are not. Profound exchanges of energy between the atmosphere and oceans, land and cryosphere occur over a range of time scales. Recent evidence from broadband satellite measurements suggests that even these TOA fluxes contain some detectable variations. Our ability to measure and reconstruct radiative fluxes at the surface and at the top of atmosphere is improving rapidly. Understanding the character of radiative flux estimates and relating them to variations in other energy fluxes and climate state variables is key to improving our understanding of climate. In this work we will evaluate several recently released estimates of radiative fluxes, focusing primarily on surface estimates. The International Satellite Cloud Climatology Project FD radiative flux profiles are available from rnid-1983 to near present and have been constructed by driving the radiative transfer physics from the Goddard Institute for Space Studies (GISS) global model with ISCCP clouds and HlRS operational soundings profiles. Full and clear sky SW and LW fluxes are produced. A similar product from the NASA/GEWEX Surface Radiation Budget Project using different radiative flux codes and thermodynamics from the NASA/Goddard Earth Observing System assimilation model makes a similar calculation of surface fluxes. However this data set currently extends only through 1995. Several estimates of downward LW flux at the surface inferred from microwave data are also examined. Since these products have been evaluated with Baseline Surface Radiation Network data over land we focus over ocean regions and use the DOE/NOAA/NASA Shipboard Ocean Atmospheric Radiation (SOAR) surface flux measurements to characterize performance of these data sets under both clear and cloudy conditions. Some aspects of performance are stratified according to SST and vertical motion regimes. Comparisons to the TRMM/CERES SRB data in 1998 are also interpreted. These radiative fluxes are then analyzed to determine how surface (and TOA) radiative exchanges respond to interannual signals of ENS0 warm and cold events. Our analysis includes regional changes as well as integrated signals over land, ocean and various latitude bands. Changes in water vapor and cloud forcing signatures are prominent on interannual time scales. Prominent signals are also found in the SW fluxes for the Pinatubo volcanic event. These systematic changes in fluxes are related to changes in large-scale circulations and energy transport in the atmosphere and ocean. Some estimates of signal-to-noise and reliability are discussed to place our results in context.

Robertson, Franklin R.↗

Three-dimensional viscous-shock-layer applications for the Space Shuttle orbiter

A nonorthogonal three-dimensional viscous-shock-layer code was modified and used to compute the windward surface flowfield over a Shuttle-like configuration. Code modifications were made in the methods used to evaluate shock boundary conditions and in the implementation of the equilibrium air models. Additional viscous terms were also retained in the governing equations. Effects of these modifications are demonstrated. Three-dimensional flowfield solutions obtained with the modified code showed good comparison of surface heating and pressure with actual flight data. An apparently three-dimensional effect, characterized by a drop in surface heating on the Shuttle windward centerline in the wing root area, was predicted by the present method. A preliminary review of Shuttle ground-based experimental and flight data confirmed this trend. The present three-dimensional solutions were also compared with the predictions of several approximate methods. Those comparisons showed the approximate methods to be valid for predicting heating along the Shuttle windward centerline uner both perfect gas and equilibrium air conditions.

Thompson, R. A.↗

THUNDER: A Titan orbiter mission concept for the New Frontiers program designed at the JPL Planetary Science Summer School

Saturn’s moon Titan is an enigmatic icy world whose surface is constantly modified by its active, Earthlike precipitation system. Here, we propose the THUNDER (Titan’s Hydrocarbons: Uncovering New Dimensions of Evolutionary pRocesses) mission concept to investigate how Titan’s surface reflects the nature of its interior and its active hydrocarbon cycle. This mission will change our understanding of Titan’s surface through three science objectives: characterizing the heat and material transport properties of Titan’s icy outer layer, tracing surface liquid storage through and across the crust, and assessing the total hydrocarbon budget through time. This New Frontiers-class mission, designed as part of the Jet Propulsion Laboratory (JPL) Planetary Science Summer School, responds directly to the call for a Titan orbiter in the NASA Planetary Science and Astrobiology Decadal Survey 2023-2032. THUNDER’s focused geology and geophysics mission could achieve full surface mapping to complement both the Cassini-Huygens and Dragonfly missions using gravity science, radar with three operational modes, and a visible-to-infrared spectrometer. These instruments together could give us the first look at Titan as a fully connected and geologically active world , revolutionizing our understanding of icy bodies, fluvial and atmospheric processes, and habitability across geologic time. Here, we summarize goals of the science mission and engineering approaches, as well as challenges and future directions to study before THUNDER can become a viable mission concept.

mission concept↗

On the Importance of Producing and Characterizing Laboratory Analogs of Cosmic Grains, Planetary Atmospheric Aerosols, and Surface Materials

Carbonaceous dust and aerosols have been observed in interstellar/circumstellar and planetary environments. Dedicated laboratory experiments have been developed to produce analogs of these solid materials under different experimental conditions (molecular precursors, temperature, pressure, energy source…). These experimental studies are key to investigating the physical and chemical processes that drive the formation of solid particles from gas and solid phase molecular precursors in astrophysical and planetary environments. They also allow the characterization of the physical, optical, and chemical properties of these laboratory-generated analogs, hence providing critical information that can be used as input parameters in models for the analysis and interpretation of observational data. Here, as an example of these laboratory efforts, we will present various studies that combined (1) experiments performed with the NASA Ames COSmIC facility to produce analogs of Titan’s atmospheric aerosols and cosmic grains from gas phase molecular precursors, and (2) the characterization of these analogs with the NASA Ames Optical Constants Facility (OCF) to provide the real and imaginary parts of their refractive indices, n + ik, to the community, from the visible to the far-infrared (0.59–200 µm, 16,950–50 per cm). We will also discuss the importance of the wavelength and spectral range coverage of these optical constants, n and k, for their use in radiative transfer, atmospheric and reflectance models, and present a new effort to develop an Optical Constant database (OCdb) to provide this critical data to the scientific community.

Cosmic Grains↗