Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Growing season boundary layer climate and surface exchanges in a subarctic lichen woodland

Between June and August 1990, observations were made at two surface micrometeorological towers near Schefferville Quebec (54 deg 52 min N, 66 deg 40.5 min W), one in a fen and one in the subarctic lichen woodland, and at four surface climatological stations. Data from these surface stations were supplemented by regular radiosonde launches. Supporting measurements of radiative components and soil temperatures allowed heat and moisture balances to be obtained at two sites. The overall surface meteorological experiment design and results of micrometeorological observations made on a 30-m tower in the lichen woodland are presented here. Seasonal variation in the heat and water vapor transport characteristics illustrate the marked effect of the late summer climatological shift in air mass type. During the first half of the summer, average valley sidewalls only 100 m high are sufficient to channel winds along the valley in the entire convective boundary layer. Channeling effects at the surface, known for some time at the long-term climate station in Schefferville, are observed both at ridge top and in the valley, possibly the response of the flow to the NW-SE orientation of valleys in the region. Diurnal surface temperature amplitude at ridge top (approximately equal to 10 C) was found to be half that observed in the valley. Relatively large differences in precipitation among these stations and the climatological station at Schefferville airport were observed and attributed to the local topography. Eddy correlation observations of the heat, moisture and momentum transports were obtained from a 30-m tower above a sparse (approximately equal to 616 stems/ha) black spruce lichen woodland. Properties of the turbulent surface boundary layer agree well with previous wind tunnel studies over idealized rough surfaces. Daytime Bowen ratios of 2.5-3 are larger than those reported in previous studies. Surface layer flux data quality was assessed by looking at the surface layer heat balance. Diurnal and seasonal scale heat budget imbalances were found. We suggest that unmeasured surface heat storage may be responsible for some of the observed imbalance. The presence of the unexplained residual in this and other studies of energy balance over forests casts a note of caution on the interpretation of energy balance components obtained using heat residual methods.

Fitzjarrald, David R.↗

Lunar theory and processes

Physical and mechanical properties of lunar surface layer as determined from Surveyor III LANDING pictures

SURFACE LAYER↗

Frequency splitter based on the directional emission from surface modes in dielectric photonic crystal structures

We demonstrate the numerical design and the experimental validation of frequency dependent directional emission from a dielectric photonic crystal structure. The wave propagates through a photonic crystal line-defect waveguide, while a surface layer at the termination of the photonic crystal enables the excitation of surface modes and a subsequent grating layer transforms the surface energy into outgoing propagating waves of the form of a directional beam. Furthermore, the angle of the beam is controlled by the frequency and the structure operates as a frequency splitter in the intermediate and far field region.

42 ENGINEERING↗

Gulf of Mexico Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the Gulf of Mexico region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from January through June in 2020 and output every 10 minutes, which permits comparison with corresponding lidar observations.

17 WIND ENERGY↗

Gulf of Mexico Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the Gulf of Mexico region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from the NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from January through June in 2020 and output every 10 minutes, which permits comparison with corresponding lidar observations.

17 WIND ENERGY↗

Gulf of Mexico Turbulence Intensity Model Data in Observational Space

The dataset archives model-simulated turbulence intensity and meteorological profiles and timeseries at the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars. The simulated data are interpolated in time and/or space according to observed quantities. The simulations were carried out for the Gulf of Mexico region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing.

17 WIND ENERGY↗

Mid-Atlantic Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the mid-Atlantic region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Air-Sea Interaction Tower (ASIT) of Woods Hole Oceanographic Institution’s Martha's Vineyard Coastal Observatory are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from February through June in 2020 and output every 10 minutes, which permits comparison with corresponding lidar observations.

17 WIND ENERGY↗

Mid-Atlantic Turbulence Intensity Data in Observational Space

The dataset archives observed and model-simulated turbulence intensity and meteorological profiles and timeseries at the Air-Sea Interaction Tower (ASIT) of Woods Hole Oceanographic Institution’s Martha’s Vineyard Coastal Observatory (MVCO). The observational data were measured by lidar and buoy deployed at ASIT. The simulated profiles and timeseries data are interpolated in time and/or space according to observations. Simulations were carried out for the mid-Atlantic region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles at the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing.

17 WIND ENERGY↗

Northern Pacific Turbulence Intensity Model Data

The dataset is a subset of simulations carried out for the northern Pacific region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the lidar buoys deployed off the coast of California (Humbolt and Morro Bay) are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing. Simulations are performed from November to December in 2020 and May through June in 2021. Model outputs every 10 minutes, permitting comparison with corresponding lidar observations.

17 WIND ENERGY↗

Northern Pacific Turbulence Intensity Model Data in Observational Space

The dataset archives model-simulated turbulence intensity and meteorological profiles and timeseries at the lidar buoys sites off the coast of California (Humboldt and Morro Bay). The simulated data are interpolated in time and/or space according to observed quantities. The simulations were carried out for the north Pacific region using the revised Weather Research and Forecasting (WRF) model version 4.2 that incorporates the implementation of online turbulence intensity (TI) calculations (Tai et al. 2023). The simulated atmospheric profiles near the Shell Exploration and Production Corporation's Tension Leg Platforms Ursa and Mars are archived. Physics parameterizations chosen for the simulations include the Thompson microphysics parameterization, Mellor-Yamada-Nakanishi Niino (MYNN) boundary layer parameterization, Mellor-Yamada-Janjic surface layer parameterization, Unified Noah land-surface parameterization, and the RRTMG longwave and shortwave radiation parameterization. Initial and boundary conditions are taken from NOAA’s High-Resolution Rapid Refresh (HRRR) product. The JPL 0.01-degree Level 4 Multiscale Ultrahigh Resolution (MUR) Global Foundation Sea Surface Temperature (SST) Analysis (V4.1) data are used as the model’s SST forcing.

17 WIND ENERGY↗

Flake Formation in Phase Layers of a Cutting Ceramic

Flake formation (cracking) is observed in inserts of untreated cutting ceramic and also during diffusional strengthening of the inserts’ surface layer by nitrogen on heating in a muffle furnace to 450–500°C, with the creation of γ-phase (a protective layer), the removal of carbon from the atomic cells, and the formation of titanium nitride. Heat-treatment conditions for inserts of cutting ceramic are established such that the flake content at their surface is reduced. Treatment to prevent flake formation is proposed: heating in a sealed muffle furnace with a nitrogen atmosphere to 250–280°C at a pressure of 0.25 MPa. In this process, the titanium carbide at the surface of the inserts is converted to titanium nitride as a result of carbon diffusion, with the formation of a protective γ-phase layer. By removing carbon from the surface layer of the inserts and ensuring the diffusion of nitrogen into the cutting ceramic, with the formation of titanium nitride in the γphase, the durability and performance of the inserts are improved, along with their mechanical properties.

36 MATERIALS SCIENCE↗

Binding and activation of ethylene on tungsten carbide and platinum surfaces

In this paper, density functional calculations were used to evaluate the ability of cubic and hexagonal phases of tungsten carbide to bind ethylene, as a model compound of unsaturated hydrocarbons, since its adsorption is the first step in important catalytic processes. The calculations give the following trend in stability: α-WC(0001)-C > α-WC(0001)-W > Pt(111) > γ-WC(001), with the binding energy varying in the range of -0.72 to -2.91 eV. The sub-surface layers play a crucial role in the binding, favoring a charge reorganization at extended ranges (above 6 Å) from bulk towards the surface, however, the electronic structure of the surface was modified only in the topmost layer. The surface sites for geometric C 2 H 4 activation were identified, leading to a surface distortion due to an upwards shifting of surface atoms in the range 0.13–0.61 Å observed in Pt(111), α-WC(0001)-C, and γ-WC(001), with distortion energies of 0.13, 0.15 and 0.61 eV, respectively. The activation of C 2 H 4 on tungsten carbides was compared with other transition metal carbide surfaces, which leads to a general classification of the elongation of carbon–carbon bond into a set of only three groups. If the interest is to activate ethylene C=C bond, the surface sites and the binding modes should be those of the groups II and III. The infrared spectra show mainly four useful signals as a fingerprint to support and complement future experiments. The results of this work indicate that the α-WC-W surface could be directly responsible for the catalytic performance, while the binding of olefins on α-WC-C could cause surface poisoning. The metastable γ-WC(001) surface could be a promising system as compared to the known α-WC(0001) surface, but challenges arise regarding its synthesis, stability and catalytic performance. Finally, these results pave the way to address further experimental and theoretical studies focused on the hydrogenation of ethylene and more complex unsaturated hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear surface waves on the boundary of a photorefractive crystal

Excitation of nonlinear surface waves is studied at the SBN-75 crystal - air interface. The SBN-75 crystal is characterised by the diffusion-type photorefractive nonlinearity, the surface wave being excited in the surface layer and the depth of its penetration into the crystal being determined by the nonlinear crystal parameters. Because of a large refraction coefficient in SBN-75, the penetration depth of the surface wave into the air is small; therefore, the nonlinear surface wave is localised in the surface crystal layer several micrometers in thickness. The oscillating intensity distribution of the surface wave at the output end of the crystal is measured. The oscillation period is determined by the angle of incidence of the exciting beam. The nonlinear wave is excited not only at the crystal - air interface but also in the case when the active surface of the crystal is covered by an electrode, for example, an aquadag layer. This circumstance opens up a possibility of studying new properties of the surface waves when an external electric field is applied to the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of Mechanical Treatment on the Surface Relief of a Fe{sub 77}Ni{sub 1}Si{sub 9}B{sub 13} Metal Glass

The micro- and nanoreliefs of the loaded surfaces of a Fe{sub 77}Ni{sub 1}Si{sub 9}B{sub 13} metal glass are probed via scanning tunneling and atomic force microscopies, scanning electron microscopy, and X-ray fluorescence. The fractal characteristics of surfaces are evaluated via the multifractal approach. As found, the variations in a singularity spectrum width, calculated from the tunneling and atomic force microscopies, may be useful for predicting the forthcoming fracture. An increase in the breaking strength of ribbons subjected to hydrostatic compression is due to decreasing microporosity of a near-surface layer, which corresponds to the surface smoothing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sapphire advanced mitigation process: wet etch to expose sub-surface damage and increase laser damage resistance and mechanical strength

In this study, a novel, to the best of our knowledge, method of wet chemical etching of sapphire workpieces (such as optics, wafers, windows, and cones), called the sapphire advanced mitigation process (or sapphire AMP), has been developed that exposes sub-surface mechanical damage created during the optical fabrication process and significantly enhances the surface laser damage resistance (> 2×) and mechanical strength (up to ~ 2.6×). Sapphire AMP involves first treating the workpiece with a mixture of sulfuric and phosphoric acid ([H 2 SO 4 ]:[H 3 PO 4 ]= 1 : 3) at 220°C, followed with phosphoric acid at 160°C, then with sodium hydroxide base (NaOH) and surfactant at 40°C, and finally with a high-pressure deionized water spray rinse. Sapphire AMP has been demonstrated on both A- and C-plane sapphire workpieces. The mechanism of this etch process involves the reaction of the sapphire (Al 2 O 3 ) surface with sulfuric acid (H 2 SO 4 ) forming aluminum sulfate [Al2(SO4)3], which has low solubility. The high phosphoric acid content in the first and second steps of sapphire AMP results in the efficient conversion of Al 2 (SO 4 ) 3 to aluminum phosphate (AlPO 4 ), which is very soluble, greatly reducing reaction product redeposition on the workpiece surface. Sapphire AMP is shown to expose sub-surface mechanical damage on the sapphire surface created during the grinding and polishing processes, whose etched morphology has either isotropic or anisotropic evolution depending on the nature of the initial surface damage. Sapphire AMP was also designed to remove the key known surface, laser absorbing precursors (namely, foreign chemical impurities, the fracture surface layer of preexisting sub-surface damage, and reaction product or foreign species redeposition or precipitation). Static and sliding indention induced surface microfractures on sapphire are shown after sapphire AMP to have a significant decrease in the fast photoluminescence intensity (a known metric for measuring the degree of laser damaging absorbing precursors). In addition, the onset of laser damage (at 351 nm 3 ns) on sapphire AMP treated workpieces was shown to increase in fluence from ~ 4 to >9.5J/cm 2 . Finally, biaxial ball-on-ring mechanical tests on sapphire disks showed an increase in the failure stress from 340 MPa (with pre-existing 28 µm flaws) to ~ 900MPa after sapphire AMP, which is attributed to the blunting of the surface microfractures.

36 MATERIALS SCIENCE↗

Variation of the low level winds during the passage of a thunderstorm gust front

Three time histories of wind profiles in thunderstorm gust fronts at Cape Kennedy and three at Oklahoma City are analyzed. Wind profiles at maximum wind strength below 100 m follow logarithmic laws, so that winds above the surface layer can be estimated from surface winds once the roughness length is known. A statistical analysis of 81 cases of surface winds during thunderstorms at Tampa revealed no predictor with skill to predict the time of maximum gust. Some 34% of the variance of the strength of the gust is accounted for by a stability index and surface wind prior to the gust; the regression equations for these variables are given. The coherence between microscale wind speed variations at the different levels has the same proportions as in non-thunderstorm cases.

Sinclair, R. W.↗

Ten-micron eclipse observations of Io, Europa, and Ganymede.

Eclipse observations of Jupiter's satellites Io, Europa, and Ganymede have been obtained in an 8 to 14-micron band pass during 1971. The simplest thermal model able to explain the data for each satellite is a two-layer surface structure with an upper layer, only a few millimeters thick, having low thermal conductivity consistent with fine rock powder or frost, and a subsurface having high thermal conductivity consistent with solid rock or dense ice. The upper layer on Io appears to be different from that on Europa and Ganymede, but the two-layer model fits all three satellites.

Hansen, O. L.↗