Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Surface roughness estimation at three points on the lunar surface using 23-CM monostatic radar

Differences in quasi-specular scattering by the lunar surface have been observed at 23-cm wavelength by using earth-based radar. By taking advantage of libration, three subradar points were isolated, and distinct scattering laws were identified for terrain near Hipparchus, Sinus Medii, and the crater Schroeter F. Interpretations of lunar radar data should henceforth incorporate a recognition that these variations take place. Unidirectional rms surface slope estimates of 6-8 deg in the Central Highlands and 4-5 deg in old mare are appropriate to horizontal scales of 100 m.

Simpson, R. A.↗
NASA NTRS2013

Surface Reflectance of Mars Observed by CRISM-MRO: 1. Multi-angle Approach for Retrieval of Surface Reflectance from CRISM Observations (mars-reco)

This article addresses the correction for aerosol effects in near-simultaneous multiangle observations acquired by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) aboard the Mars Reconnaissance Orbiter. In the targeted mode, CRISM senses the surface of Mars using 11 viewing angles, which allow it to provide unique information on the scattering properties of surface materials. In order to retrieve these data, however, appropriate strategies must be used to compensate the signal sensed by CRISM for aerosol contribution. This correction is particularly challenging as the photometric curve of these suspended particles is often correlated with the also anisotropic photometric curve of materials at the surface. This article puts forward an innovative radiative transfer based method named Multi-angle Approach for Retrieval of Surface Reflectance from CRISM Observations (MARS-ReCO). The proposed method retrieves photometric curves of surface materials in reflectance units after removing aerosol contribution. MARS-ReCO represents a substantial improvement regarding previous techniques as it takes into consideration the anisotropy of the surface, thus providing more realistic surface products. Furthermore, MARS-ReCO is fast and provides error bars on the retrieved surface reflectance. The validity and accuracy of MARS-ReCO is explored in a sensitivity analysis based on realistic synthetic data. According to experiments, MARS-ReCO provides accurate results (up to 10 reflectance error) under favorable acquisition conditions. In the companion article, photometric properties of Martian materials are retrieved using MARS-ReCO and validated using in situ measurements acquired during the Mars Exploration Rovers mission.

CRISM/MRO↗
NASA NTRS1993

Modifications to the three-component classification algorithm for SAR data

Previously, a scattering model was used to classify SAR data as due to three mechanisms: surface or odd-bounce scattering; double-bounce scattering; and volume scattering. A Bragg rough-surface model was used for odd-bounce scattering, and two reflecting surfaces, as in a dihedral corner reflector, represented the double-bounce scattering mechanism. A random collection of infinitely thin cylinders was used to model the volume scattering contribution. It was assumed that the cylinders are uniformly oriented in all directions. In this work, modifications are made to the above model, which include specifying a preferred orientation for the cylinders representing branches and using thin cylinders of finite thickness as opposed to infinitely thin ones. In the first case, the preferred orientation is represented by a probability density function in the form of a dirac delta function. For the second case, small argument asymptotic expansions of Bessel functions are used to express the volume scattering contributions in terms of quantities containing the average radius of the cylinders. Since in each case the number of unknowns exceeds that of equations, simplifying assumptions are made. The solutions are applied to multifrequency polarimetric SAR data to obtain the new unknowns in addition to the relative contributions of each scattering mechanism. Several results are presented. It is found that the calculated percentage of each mechanism does not change significantly compared to the original model; however, additional information is gained about the scatterers.

Moghaddam, M.↗
DOE OSTI2018

Plasmonic Hybrid Biocomposite as an Effective Substrate for Detection of Biomolecules by Surface-Enhanced Raman Spectroscopy

The enhancement of the Raman light scattering signal from the surface of the porous hybrid biocomposites based on polyhydroxybutyrate (PHB), calcium carbonate (CaCO{sub 3}), and nanoplasmonic Ag particles is investigated. Based on PHB, fibrous scaffolds are obtained by the electrospinning technique. The fibrous scaffolds have been covered by CaCO{sub 3} and Ag nanoparticles by means of mineralization in salt solutions and Ag reduction reaction. Successful formation of the CaCO{sub 3} and Ag nanoparticles on the scaffold surface has been confirmed by the data of scanning electron microscopy, x-ray diffraction analysis, and infrared spectroscopy. Surface-enhanced Raman spectroscopy (SERS) of the obtained sample surface has demonstrated a significant enhancement of the Rhodamine 6G signal (E{sub f} > 10{sup 5}) in comparison with the reference sample where the analyte concentration and the laser power were 100 times higher. Thus, the present research has confirmed prospects for the application of biocomposites based on polyhydroxybutyrate for detection and investigation of biomolecules by the SERS method.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Estimating Vegetation Parameters from Interferometric and Polarimetric Radar Using Physical Scattering Models

Radar data from vegetated land surfaces depend on many structural and compositional parameters describing the terrain. Because early, noninterferometric radar systems usually constituted an insufficient observation set from which to estimate parameters of the terrain, statistical regression techniques were used which incorporated some level of apriori knowledge or field measurements. With the advent of radar interferometry and polarimetric interferometry, potentially at multiple baselines, the observation set is now approaching that required to quantitatively estimate the parameters describing a vegetated land surface. Quantitative estimation entails formulating a physical scattering model relating the radar observations to the vegetation and surface parameters on which they depend. This paper describes the physics of candidate scattering models, and shows how the models determine the estimable parameter set. It also indicates the measurement accuracy of parameters such as vegetation height, height-to-base-of-live-crown, and surface topography with multibaseline polarimetric interferometry.

Treuhaft, Robert N.↗
NASA NTRS1988

Mathematical Model For Scattering From Mirrors

Additional terms account for effects of particulate contamination. Semiempirical mathematical model of scattering of light from surface of mirror gives improved account of effects of particulate contamination. Models that treated only scattering by microscopic irregularities in surface gave bidirectional reflectance distribution functions differing from measured scattering intensities over some ranges of angles.

Wang, Yaujen↗
NASA NTRS2011

Global Precipitation Measurement, Validation, and Applications Integrated Hydrologic Validation to Improve Physical Precipitation Retrievals for GPM

Land surface modeling and data assimilation can provide dynamic land surface state variables necessary to support physical precipitation retrieval algorithms over land. It is well-known that surface emission, particularly over the range of frequencies to be included in the Global Precipitation Measurement Mission (GPM), is sensitive to land surface states, including soil properties, vegetation type and greenness, soil moisture, surface temperature, and snow cover, density, and grain size. In order to investigate the robustness of both the land surface model states and the microwave emissivity and forward radiative transfer models, we have undertaken a multi-site investigation as part of the NASA Precipitation Measurement Missions (PMM) Land Surface Characterization Working Group. Specifically, we will demonstrate the performance of the Land Information System (LIS; http://lis.gsfc.nasa.gov; Peters-Lidard et aI., 2007; Kumar et al., 2006) coupled to the Joint Center for Satellite Data Assimilation (JCSDA's) Community Radiative Transfer Model (CRTM; Weng, 2007; van Deist, 2009). The land surface is characterized by complex physical/chemical constituents and creates temporally and spatially heterogeneous surface properties in response to microwave radiation scattering. The uncertainties in surface microwave emission (both surface radiative temperature and emissivity) and very low polarization ratio are linked to difficulties in rainfall detection using low-frequency passive microwave sensors (e.g.,Kummerow et al. 2001). Therefore, addressing these issues is of utmost importance for the GPM mission. There are many approaches to parameterizing land surface emission and radiative transfer, some of which have been customized for snow (e.g., the Helsinki University of Technology or HUT radiative transfer model;) and soil moisture (e.g., the Land Surface Microwave Emission Model or LSMEM).

Peters-Lidar, Christa D.↗
NASA NTRS1987

Wind tunnel model surface gauge for measuring roughness

The optical inspection of surface roughness research has proceeded along two different lines. First, research into a quantitative understanding of light scattering from metal surfaces and into the appropriate models to describe the surfaces themselves. Second, the development of a practical instrument for the measurement of rms roughness of high performance wind tunnel models with smooth finishes. The research is summarized, with emphasis on the second avenue of research.

Vorburger, T. V.↗
NASA NTRS1998

Fitting a Two-Component Scattering Model to Polarimetric SAR Data

Classification, decomposition and modeling of polarimetric SAR data has received a great deal of attention in the recent literature. The objective behind these efforts is to better understand the scattering mechanisms which give rise to the polarimetric signatures seen in SAR image data. In this Paper an approach is described, which involves the fit of a combination of two simple scattering mechanisms to polarimetric SAR observations. The mechanisms am canopy scatter from a cloud of randomly oriented oblate spheroids, and a ground scatter term, which can represent double-bounce scatter from a pair of orthogonal surfaces with different dielectric constants or Bragg scatter from a moderately rough surface, seen through a layer of vertically oriented scatterers. An advantage of this model fit approach is that the scattering contributions from the two basic scattering mechanisms can be estimated for clusters of pixels in polarimetric SAR images. The solution involves the estimation of four parameters from four separate equations. The model fit can be applied to polarimetric AIRSAR data at C-, L- and P-Band.

Freeman, A.↗
DOE OSTI2019

Microfluidic electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

Porous, high-surface-area electrode architectures are described that allow structural characterization of interfacial amorphous thin films with high spatial resolution under device-relevant functional electrochemical conditions using high-energy X-ray (>50 keV) scattering and pair distribution function (PDF) analysis. Porous electrodes were fabricated from glass-capillary array membranes coated with conformal transparent conductive oxide layers, consisting of either a 40 nm–50 nm crystalline indium tin oxide or a 100 nm–150 nm-thick amorphous indium zinc oxide deposited by atomic layer deposition. These porous electrodes solve the problem of insufficient interaction volumes for catalyst thin films in two-dimensional working electrode designs and provide sufficiently low scattering backgrounds to enable high-resolution signal collection from interfacial thin-film catalysts. For example, PDF measurements were readily obtained with 0.2 Å spatial resolution for amorphous cobalt oxide films with thicknesses down to 60 nm when deposited on a porous electrode with 40 µm-diameter pores. This level of resolution resolves the cobaltate domain size and structure, the presence of defect sites assigned to the domain edges, and the changes in fine structure upon redox state change that are relevant to quantitative structure–function modeling. The results suggest the opportunity to leverage the porous, electrode architectures for PDF analysis of nanometre-scale surface-supported molecular catalysts. In addition, a compact 3D-printed electrochemical cell in a three-electrode configuration is described which is designed to allow for simultaneous X-ray transmission and electrolyte flow through the porous working electrode.

36 MATERIALS SCIENCE↗
NASA NTRS2005

Dependence of Surface Contrast on Emission Angle in Cassini ISS 938-nm Images of Titan

Titan, the largest of Saturn s moons, is one of the most difficult solid surfaces in the Solar System to study. It is shrouded in a thick atmosphere with fine haze particles extending up to 500 km. [1] The atmosphere itself is rich in methane, which allows clear viewing of the surface only through narrow "windows" in the methane spectrum. Even in these methane windows, the haze absorbs and scatters light, blurring surface features and reducing the contrast of images. The haze optical depth is high at visible wavelengths, and decreases at longer (infrared) wavelengths. [2]

Fussner, S.↗
NASA NTRSDate not supplied

On A Stabilization of the Ingard-Myers Impedance Boundary Condition

It has been well-known that the Ingard-Myers impedance condition, while simple to apply, is subject to the hydrodynamic Kelvin-Helmholtz instability due to its use of a vortex sheet in modeling the flow at the liner boundary. Recently, in the development of a time domain boundary element method for acoustic scattering by treated surfaces, it was found that by neglecting a certain second-order spatial derivative term in the Ingard-Myers formulation, the hydrodynamic instability can be avoided. The present paper aims to provide further analysis of this modified condition, hereby referred to as Truncated Ingard-Myers Impedance Boundary Condition (TIMIBC). It will be shown, based on the dispersion relations of linear waves, that the instability intrinsic to the Ingard-Myers condition is eliminated in the proposed new formulation. Quantitative assessments on the accuracy of TIMIBC for scattering of acoustic waves by lined surfaces will be carried out, and its effectiveness will be demonstrated by numerical examples. Specifically, the accuracy is assessed by comparing solutions obtained by the Ingard-Myers condition with that by the proposed TIMIBC where theoretical reflection coefficients at a lined surface are derived for cases of plane and spherical incident waves. It is found that the TIMIBC provides a good approximation to the original Ingard-Myers condition for flows of low to mid subsonic Mach numbers. Time domain implementations of TIMIBC are also discussed and illustrated with a numerical example using a finite difference scheme. As many studies have shown the Ingard-Myers condition to be the correct limit of boundary layer thickness going to zero, the proposed TIMIBC can offer a practical solution for overcoming the intrinsic instability associated with the Ingard-Myers condition.

Time Domain BEM↗
NASA NTRSDate not supplied

On A Stabilization of the Ingard-Myers Impedance Boundary Condition

It has been well-known that the Ingard-Myers impedance condition, while simple to apply, is subject to the hydrodynamic Kelvin-Helmholtz instability due to its use of a vortex sheet in modeling the flow at the liner boundary. Recently, in the development of a time domain boundary element method for acoustic scattering by treated surfaces, it was found that by neglecting a certain second-order spatial derivative term in the Ingard-Myers formulation, the hydrodynamic instability can be avoided. The present paper aims to provide further analysis of this modified condition, hereby referred to as Truncated Ingard-Myers Impedance Boundary Condition (TIMIBC). It will be shown, based on the dispersion relations of linear waves, that the instability intrinsic to the Ingard-Myers condition is eliminated in the proposed new formulation. Quantitative assessments on the accuracy of TIMIBC for scattering of acoustic waves by lined surfaces will be carried out, and its effectiveness will be demonstrated by numerical examples. Specifically, the accuracy is assessed by comparing solutions obtained by the Ingard-Myers condition with that by the proposed TIMIBC where theoretical reflection coefficients at a lined surface are derived for cases of plane and spherical incident waves. It is found that the TIMIBC provides a good approximation to the original Ingard-Myers condition for flows of low to mid subsonic Mach numbers. Time domain implementations of TIMIBC are also discussed and illustrated with a numerical example using a finite difference scheme. As many studies have shown the Ingard-Myers condition to be the correct limit of boundary layer thickness going to zero, the proposed TIMIBC can offer a practical solution for overcoming the intrinsic instability associated with the Ingard-Myers condition.

Time Domain BEM↗
DOE OSTI2023

Heteroepitaxial chemistry of zinc chalcogenides on InP nanocrystals for defect-free interfaces with atomic uniformity

Heteroepitaxy on colloidal semiconductor nanocrystals is an essential strategy for manipulating their optoelectronic functionalities. However, their practical synthesis typically leads to scattered and unexpected outcomes due to the intervention of multiple reaction pathways associated with complicated side products of reactants. Here, the heteroepitaxy mechanism of zinc chalcogenide initiated on indium phosphide (InP) colloidal nanocrystals is elucidated using the precursors, zinc carboxylate and trialkylphosphine selenide. The high magnetic receptivity of 77 Se and the characteristic longitudinal optical phonon mode of ZnSe allowed for monitoring the sequence of epilayer formation at the molecular level. The investigation revealed the sterically hindered acyloxytrialkylphosphonium and diacyloxytrialkylphosphorane to be main intermediates in the surface reaction, which retards the metal ion adsorption by a large steric hindrance. The transformation of adsorbates to the crystalline epilayer was disturbed by surface oxides. Raman scattering disclosed the pathway of secondary surface oxidation triggered by carboxylate ligands migrated from zinc carboxylate. The surface-initiated heteroepitaxy protocol is proposed to fabricate core/shell heterostructured nanocrystals with atomic-scale uniformity of epilayers. Despite the large lattice mismatch of ZnS to InP, we realised a uniform and interface defect-free ZnS epilayer (~0.3 nm thickness) on InP nanocrystals, as evidenced by a high photoluminescence quantum yield of 97.3%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Adsorption of Non-Ionic Surfactant and Monoclonal Antibody on Siliconized Surface Studied by Neutron Reflectometry

The adsorption of monoclonal antibodies (mAbs) on hydrophobic surfaces is known to cause protein aggregation and degradation. Therefore, surfactants, such as Poloxamer 188, are widely used in therapeutic formulations to stabilize mAbs and protect mAbs from interacting with liquid-solid interfaces. Here, the adsorption of Poloxamer 188, one mAb and their competitive adsorption on a model hydrophobic siliconized surface is investigated with neutron scattering coupled with contrast variation to determine the molecular structure of adsorbed layers for each case. Small angle neutron scattering measurements of the affinity of Poloxamer 188 to this mAb indicate that there is negligible binding at these solution conditions. Neutron reflectometry measurements of the mAb show irreversible adsorption on the siliconized surface, which cannot be washed off with neat buffer. Poloxamer 188 can be adsorbed on the surface already occupied by mAb, which enables partial removal of some adsorbed mAb by washing with buffer. The adsorption of the surfactant introduces significant conformational changes for mAb molecules that remain on the surface. In contrast, if the siliconized surface is first saturated with the surfactant, no adsorption of mAb is observed. Competitive adsorption of mAb and Poloxamer 188 from solution leads to a surface dominantly occupied with surfactant molecules, whereas only a minor amount of mAb absorbs. These findings clearly indicate that Poloxamer 188 can protect against mAb adsorption as well as modify the adsorbed conformation of previously adsorbed mAb.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Fitting a Two-Component Scattering Model to Polarimetric SAR Data from Forests

Two simple scattering mechanisms are fitted to polarimetric synthetic aperture radar (SAR) observations of forests. The mechanisms are canopy scatter from a reciprocal medium with azimuthal symmetry and a ground scatter term that can represent double-bounce scatter from a pair of orthogonal surfaces with different dielectric constants or Bragg scatter from a moderately rough surface, which is seen through a layer of vertically oriented scatterers. The model is shown to represent the behavior of polarimetric backscatter from a tropical forest and two temperate forest sites by applying it to data from the National Aeronautic and Space Agency/Jet Propulsion Laboratory's Airborne SAR (AIRSAR) system. Scattering contributions from the two basic scattering mechanisms are estimated for clusters of pixels in polarimetric SAR images. The solution involves the estimation of four parameters from four separate equations. This model fit approach is justified as a simplification of more complicated scattering models, which require many inputs to solve the forward scattering problem. The model is used to develop an understanding of the ground-trunk double-bounce scattering that is present in the data, which is seen to vary considerably as a function of incidence angle. Two parameters in the model fit appear to exhibit sensitivity to vegetation canopy structure, which is worth further exploration. Results from the model fit for the ground scattering term are compared with estimates from a forward model and shown to be in good agreement. The behavior of the scattering from the ground-trunk interaction is consistent with the presence of a pseudo-Brewster angle effect for the air-trunk scattering interface. If the Brewster angle is known, it is possible to directly estimate the real part of the dielectric constant of the trunks, a key variable in forward modeling of backscatter from forests. It is also shown how, with a priori knowledge of the forest height, an estimate for the attenuation coefficient of the canopy can be obtained directly from the multi-incidence-angle polarimetric observations. This attenuation coefficient is another key variable in forward models and is generally related to the canopy density.

temperate forests↗
DOE OSTI2019

Inelastic Neutron Scattering As an Indication of a New Type of Gapped Surface Excitations in Liquid He

We analyze the experimental data [1] on inelastic neutron scattering by a thin 5-atomic-layer film of liquid helium at three different temperatures: T = 0.4, 0.98, and 1.3 K. These data were partially published previously [2–4], but here we present them in a better quality and at various temperatures. The neutron scattering intensity plots, in addition to the previously know dispersion of phonons and ripplons, suggest a branch of gapped surface excitations with activation energy ~4.5 K and the dispersion similar to that expected for surfons—the bound quantum states of helium atoms above liquid helium surface, proposed and investigated theoretically [5, 6]. These data, probably, provide the first direct experimental confirmation of surfons. Before these surface excitations received only indirect experimental substantiation, based on the temperature dependence of surface tension coefficient [5, 6] and on their interaction with surface electrons [7, 8]. The existence of surfons as an additional type of surface excitations, although being debated yet, is very important for various physical properties of He surface. We also analyze previous numerical results on excitations in liquid helium and argue that surface excitations similar to surfons have been previously obtained by numerical calculations and called resonance interface states [21].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗