SEARCH · Search NASA

Results for “surface validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Innovative Approaches to Using the International Space Station as a Mars Transit Analog

Human research on the International Space Station (ISS) crew has made significant advances in understanding of the effects of physiology on human health in space missions. However, ISS has not been as suitable for research on other hazards of human spaceflight such as isolation and communications delay. NASA recently completed a special assessment of whether modifications could be made to operations or facilities so that ISS could be used more effectively as an analog to simulate long-duration crew missions beyond low earth orbit. A cross-disciplinary team met to identify concept of operations, trade spaces, challenges, and opportunities to making ISS more operationally relevant as a Mars transit mission analog, and the results and implementation plans are summarized in this manuscript. In addition to the use case of 12-month missions (already in planning by the NASA ISS Program to bound expected Mars transit durations), three new use cases where ISS could provide valuable high-fidelity experience were identified. (1) Testing of operations procedures and medical care could be enhanced by demonstrating crew handling a simulated medical event in microgravity, autonomously, and with significant communications delay. (2) Isolation and confinement effects of deep space transit could be studied on ISS to validate current habitable volume requirements for Mars transit as well as provide context for evaluating the results of the extensive ground-based simulations in HERA and NEK. A trade study of possible operational and hardware changes that would make ISS applicable to these use cases was completed. (3) Surface operations after the physiological deconditioning of a long transit could be conducted to validate crew ability to perform critical ground tasks after 6-month Mars transit and aid in conceptual design of Mars surface element architectures. Each of the case studies includes a trade space between operational impacts on nominal ISS activities and degree of fidelity. A phased approach to implementation means that several "quick start" activities can be done in 2019-2020 at the same time as planning continues for more complex exploration analog options beginning as early as 2022. The team determined that many of these quick-start tasks could be done with available assets, entirely independent of other exploration system development timelines (such as Orion, Space Launch System). The consideration of the full suite of human spaceflight capabilities in the lunar vicinity can also be included as each step in human exploration serves as a simulation opportunity for some aspect of subsequent missions. Further discussions of options with the international community are critical for considering the benefits as well as impacts of simulation activities on ISS, as well as to better formulate future mission architectures.

Robinson, Julie A.↗

NASA NTRS2022

Visual Odometry Thinking While Driving for the Curiosity Mars Rover's Three-Year Test Campaign: Impact of Evolving Constraints on Verification and Validation

Over the first 9 years of the Mars Science Laboratory (MSL) Curiosity rover's surface mission, more than 87\% of its driving has been performed using Visual Odometry (VO). The benefits of using VO during driving are that it minimizes rover position uncertainty and can be used to monitor wheel slip, halting a drive if excessive wheel slip is occurring. The VO implementation on board Curiosity acquires and processes VO images in between drive steps while the rover is stationary. A VO Thinking While Driving (VTWD) flight software capability has been developed which enables the processing of VO images during rover driving, increasing the distance Curiosity can drive with VO in a given time period up to as much as 1.75x total distance. Verification and Validation (V\&V) of the capability has been challenging due to impacts from the COVID-19 pandemic and unavailability of the JPL Mars Yard outdoor test site. The VTWD V\&V test procedures were modified to use a small indoor space with Mars-like terrain. This paper describes the 3 year V\&V effort under challenging conditions to approve the VTWD capability for use on the Curiosity rover.

Rankin, Arturo↗

NASA NTRS2002

Using Ground-Based Measurements and Retrievals to Validate Satellite Data

The proposed research is to use the DOE ARM ground-based measurements and retrievals as the ground-truth references for validating satellite cloud results and retrieving algorithms. This validation effort includes four different ways: (1) cloud properties on different satellites, therefore different sensors, TRMM VIRS and TERRA MODIS; (2) cloud properties at different climatic regions, such as DOE ARM SGP, NSA, and TWP sites; (3) different cloud types, low and high level cloud properties; and (4) day and night retrieving algorithms. Validation of satellite-retrieved cloud properties is very difficult and a long-term effort because of significant spatial and temporal differences between the surface and satellite observing platforms. The ground-based measurements and retrievals, only carefully analyzed and validated, can provide a baseline for estimating errors in the satellite products. Even though the validation effort is so difficult, a significant progress has been made during the proposed study period, and the major accomplishments are summarized in the follow.

Dong, Xiquan↗

NASA NTRS2006

M1 Mirror Print-Thru Investigation and Performance on the Thermo-Opto-Mechanical Testbed for the Space Interferometry Mission

This paper presents the studies carried out to determine the source of the surface distortions on the M1 mirror as well as comparison and model validation during testing. This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

surface deformations↗

NASA NTRS2020

Alaska Transportation & Infrastructure Identifying Permafrost Subsidence Using NASA Earth Observations to Pinpoint Road and Infrastructure Vulnerability in Fairbanks, Alaska

A rapidly warming Arctic has compromised the structural integrity of critical infrastructure through accelerated permafrost thaw and thermokarst development underlying these areas. Infrastructure, including roads, bridges, and airports across the state of Alaska are particularly at risk, as permafrost underlies ~85% of the state. However, monitoring the impacts of permafrost thaw on infrastructure is largely limited to in situ observations and frequently identified after the damage is evident. In order to assist transportation and infrastructure decision-makers in Alaska, this project identified and quantified areas of surface subsidence near critical infrastructure. Seasonal interferograms were created using Sentinel-1 C-band Synthetic Aperture Radar (SAR) and L-band Uninhabited Aerial Vehicle SAR (UAVSAR) data to identify areas experiencing surface deformation. Additionally, Light Detection and Ranging (LiDAR) datasets were used to validate select interferograms created between 2017 and 2019. Validation of subsidence detection across platforms was performed over a 7x8 sq. kilometer field site for 2017. The strongest relationship in spatial deformation is observed between Sentinel-1 and UAVSAR with a residual root mean square error of 20 mm. These results suggest that both UAVSAR and Sentinel-1 platforms are capable of detecting surface subsidence. The higher resolution of UAVSAR is better able to resolve localized subsidence features of less than 80 meters, but is limited by temporal resolution. In conjunction, UAVSAR and Sentinel-1 can provide complementary spatial and temporal resolutions for subsidence analysis in the absence of in situ data.

DEVELOP Tech Paper↗

NASA NTRS1996

Assimilation of Geosat Altimetric Data in a Nonlinear Shallow-Water Model of the Indian Ocean by Adjoint Approach. Part II: Some Validation and Interpretation of the Assimilated Results: Some Validation and Interpretation of the Assimilated Results - Part 2

This paper examines the results of assimilating Geosat sea level variations relative to the November 1986-November 1988 mean reference, in a nonlinear reduced-gravity model of the Indian Ocean, Data have been assimilated during one year starting in November 1986 with the objective of optimizing the initial conditions and the yearly averaged reference surface. The thermocline slope simulated by the model with or without assimilation is validated by comparison with the signal, which can be derived from expandable bathythermograph measurements performed in the Indian Ocean at that time. The topography simulated with assimilation on November 1986 is in very good agreement with the hydrographic data. The slopes corresponding to the South Equatorial Current and to the South Equatorial Countercurrent are better reproduced with assimilation than without during the first nine months. The whole circulation of the cyclonic gyre south of the equator is then strongly intensified by assimilation. Another assimilation experiment is run over the following year starting in November 1987. The difference between the two yearly mean surfaces simulated with assimilation is in excellent agreement with Geosat. In the southeastern Indian Ocean, the correction to the yearly mean dynamic topography due to assimilation over the second year is negatively correlated to the one the year before. This correction is also in agreement with hydrographic data. It is likely that the signal corrected by assimilation is not only due to wind error, because simulations driven by various wind forcings present the same features over the two years. Model simulations run with a prescribed throughflow transport anomaly indicate that assimilation is rather correcting in the interior of the model domain for inadequate boundary conditions with the Pacific.

Greiner, Eric↗

NASA NTRS2020

Alaska Transportation & Infrastructure - Identifying Permafrost Subsidence Using NASA Earth Observations to Pinpoint Road & Infrastructure Vulnerability in Fairbanks, Alaska

A rapidly warming Arctic has compromised the structural integrity of critical infrastructure through accelerated permafrost thaw and thermokarst development underlying these areas. Infrastructure, including roads, bridges, and airports across the state of Alaska are particularly at risk, as permafrost underlies ~85% of the state. However, monitoring the impacts of permafrost thaw on infrastructure is largely limited to in situ observations and frequently identified after the damage is evident. In order to assist transportation and infrastructure decision-makers in Alaska, this project identified and quantified areas of surface subsidence near critical infrastructure. Seasonal interferograms were created using Sentinel-1 C-band Synthetic Aperture Radar (SAR) and L-band Uninhabited Aerial Vehicle SAR (UAVSAR) data to identify areas experiencing surface deformation. Additionally, Light Detection and Ranging (LiDAR) datasets were used to validate select interferograms created between 2017 and 2019. Validation of subsidence detection across platforms was performed over a 7x8 sq. kilometer field site for 2017. UAVSAR and Sentinel-1 seasonal deformation returns produced consistent spatial deformation patterns with residual root mean squared errors of 13 and 21 millimeters, respectively. These results suggest that both UAVSAR and Sentinel-1 platforms are capable of detecting surface subsidence. The higher resolution of UAVSAR is better able to resolve localized subsidence features of less than 80 meters, but is limited by temporal resolution.In conjunction, UAVSAR and Sentinel-1 can provide complementary spatial and temporal resolutions for subsidence analysis in the absence of in situ data.

Patrick Saylor↗

NASA NTRSDate not supplied

Validating uPSP with Transducers

Unsteady Pressure-Sensitive Paint (uPSP) technology provides simultaneously high-frequency and high-spatial resolution surface pressure fluctuation measurements. It has demonstrated value in wind tunnel test facilities to evaluate aerospace vehicle unsteady aerodynamics. The calibration of measurements from digital pixel counts into corresponding physical units relies on both lab-based and in-situ calibration steps, and its validation is both challenging and critical to adoption of the technology. We present a rigorous methodology for direct comparison of uPSP-derived surface pressure measurements to reference pressure transducer data based on a model of the camera-based measurement error, a model of the flow field pressure signal, and their propagation through the uPSP data reduction algorithm. The methodology is demonstrated on data collected in a small-scale, subsonic wind tunnel test as well as data collected from a Space Launch System unsteady aerodynamics characterization test at the NASA Ames Research Center Unitary Plan Wind Tunnel Complex.

Pressure-Sensitive Paint↗

NASA NTRS2011

Validation of Methods to Predict Vibration of a Panel in the Near Field of a Hot Supersonic Rocket Plume

This paper describes the measurement and analysis of surface fluctuating pressure level (FPL) data and vibration data from a plume impingement aero-acoustic and vibration (PIAAV) test to validate NASA s physics-based modeling methods for prediction of panel vibration in the near field of a hot supersonic rocket plume. For this test - reported more fully in a companion paper by Osterholt & Knox at 26th Aerospace Testing Seminar, 2011 - the flexible panel was located 2.4 nozzle diameters from the plume centerline and 4.3 nozzle diameters downstream from the nozzle exit. The FPL loading is analyzed in terms of its auto spectrum, its cross spectrum, its spatial correlation parameters and its statistical properties. The panel vibration data is used to estimate the in-situ damping under plume FPL loading conditions and to validate both finite element analysis (FEA) and statistical energy analysis (SEA) methods for prediction of panel response. An assessment is also made of the effects of non-linearity in the panel elasticity.

Bremner, P. G.↗

NASA NTRS2011

Fission Surface Power Technology Development Update

Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and places beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited or environmental conditions are challenging (e.g., extreme cold, dust storms). NASA and the Department of Energy are maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for a fission surface power system. The Fission Surface Power Systems project has focused on subscale component and subsystem demonstrations to address the feasibility of a low-risk, low-cost approach to space nuclear power for surface missions. Laboratory demonstrations of the liquid metal pump, reactor control drum drive, power conversion, heat rejection, and power management and distribution technologies have validated that the fundamental characteristics and performance of these components and subsystems are consistent with a Fission Surface Power preliminary reference concept. In addition, subscale versions of a non-nuclear reactor simulator, using electric resistance heating in place of the reactor fuel, have been built and operated with liquid metal sodium-potassium and helium/xenon gas heat transfer loops, demonstrating the viability of establishing system-level performance and characteristics of fission surface power technologies without requiring a nuclear reactor. While some component and subsystem testing will continue through 2011 and beyond, the results to date provide sufficient confidence to proceed with system level technology readiness demonstration. To demonstrate the system level readiness of fission surface power in an operationally relevant environment (the primary goal of the Fission Surface Power Systems project), a full scale, 1/4 power Technology Demonstration Unit (TDU) is under development. The TDU will consist of a non-nuclear reactor simulator, a sodium-potassium heat transfer loop, a power conversion unit with electrical controls, and a heat rejection system with a multi-panel radiator assembly. Testing is planned at the Glenn Research Center Vacuum Facility 6 starting in 2012, with vacuum and liquid-nitrogen cold walls to provide simulation of operationally relevant environments. A nominal two-year test campaign is planned including a Phase 1 reactor simulator and power conversion test followed by a Phase 2 integrated system test with radiator panel heat rejection. The testing is expected to demonstrate the readiness and availability of fission surface power as a viable power system option for NASA's exploration needs. In addition to surface power, technology development work within this project is also directly applicable to in-space fission power and propulsion systems.

Palac, Donald T.↗

NASA NTRS2006

Cryogenic Tank Modeling for the Saturn AS-203 Experiment

A computational fluid dynamics (CFD) model is developed for the Saturn S-IVB liquid hydrogen (LH2) tank to simulate the 1966 AS-203 flight experiment. This significant experiment is the only known, adequately-instrumented, low-gravity, cryogenic self pressurization test that is well suited for CFD model validation. A 4000-cell, axisymmetric model predicts motion of the LH2 surface including boil-off and thermal stratification in the liquid and gas phases. The model is based on a modified version of the commercially available FLOW3D software. During the experiment, heat enters the LH2 tank through the tank forward dome, side wall, aft dome, and common bulkhead. In both model and test the liquid and gases thermally stratify in the low-gravity natural convection environment. LH2 boils at the free surface which in turn increases the pressure within the tank during the 5360 second experiment. The Saturn S-IVB tank model is shown to accurately simulate the self pressurization and thermal stratification in the 1966 AS-203 test. The average predicted pressurization rate is within 4% of the pressure rise rate suggested by test data. Ullage temperature results are also in good agreement with the test where the model predicts an ullage temperature rise rate within 6% of the measured data. The model is based on first principles only and includes no adjustments to bring the predictions closer to the test data. Although quantitative model validation is achieved or one specific case, a significant step is taken towards demonstrating general use of CFD for low-gravity cryogenic fluid modeling.

Grayson, Gary D.↗

NASA NTRSDate not supplied

Artificial Neural Network (ANN) Surface Longwave and Shortwave Fluxes Trained on CERES Observations

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of the radiative fluxes and clouds systems. CERES climate quality data products typically take several months of calibration and validation before release to the public. The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed to provide key data for the applied sciences and educational users within a week of observation. FLASHFlux achieves this by using simplified calibration, an operational meteorological product from Global Modeling and Assimilation Office (GMAO), and its own surface parameterizations model. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra and NOAA-20 observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1o x 1o gridded data that combines Terra and NOAA-20 observations. Currently, FLASHFlux uses the Langley Parameterized Shortwave Algorithm (LPSA) and Langley Parameterized Longwave Algorithm (LPLA) to derive its surface fluxes (Kratz et al., 2010; Gupta et al, 2001). A new Machine Learning (ML) based approach using Artificial Neural Networks to derive Surface Longwave (LW) & Shortwave (SW) fluxes based on training data from the CERES Clouds Radiative Swath (CRS) product is being investigated to replace LPSA and LPLA in the SSF surface flux products. One of the biggest hurdles in training ML model is model fitting. To overcome the problem of overfitting we use feature engineering that helps in finding the important feature and remove features that are irrelevant to the model. In our training we employed the Leave-One-Feature-Out Importance (LOFO) to evaluate the significance of each feature in our training. We intercompare ANN fluxes against surface fluxes produced from the Fu-Liou model in CRS and the LPSA/LPLA in FLASHFlux SSF. Furthermore, we validated ANN derived fluxes to the Baseline Surface Radiation Network (BSRN).

P C Sawaengphokhai↗

NASA NTRSDate not supplied

Investigating Photogrammetric Accuracy of a Lunar-lander-induced Crater Measurement System

Laboratory measurements have been made to validate the performance of the Stereo CAmeras for Lunar Plume-Surface Studies (SCALPSS) stereo photogrammetry systems which will be flying to the moon on two of NASA’s upcoming Commercial Lunar Payload Services (CLPS) missions. Until recently, the system’s accuracy had only been studied using idealized geometric shapes as measurement targets. A realistic crater model of representative scale and an idealized ‘staircase’ target have been used to compare measurement accuracy of ideal versus lunar-like objects, with the commercial V-STARS® system being used to provide the known reference values for comparison. In a parametric study, altitude, lens focal length, and camera separation are varied to assess each parameter’s impact on photogrammetric accuracy in relation to the scaling law prediction developed previously. The SCALPSS 1.0 and 1.1 configurations have been validated on the crater model within acceptable accuracy for the missions, performing significantly better than the scaling law prediction in some cases. A semi-automated post-processing routine was developed in MATLAB® and proved successful for the cross-correlation of features between two stereo images. For some cases of extreme convergence angles between a camera pair, manual feature detection and matching was required. By using this manual process, the crater depth map was reconstructed but with worse accuracy than the idealized staircase measurements; refinements to the processing algorithm are expected to improve future results. Also examined in this work is the impact of illumination environments, both natural (e.g., Sun angles) and artificial (diffuse or structured illumination sources), on the camera system’s ability to measure the erosion of the lunar terrain.

Plume-surface interaction↗

NASA NTRSDate not supplied

Investigating Photogrammetric Accuracy of a Lunar-lander-induced Crater Measurement System

Plume-surface interaction↗

NASA NTRS1971

The meaning of Russell's law

Russell law validity of planet brightness dependence on phase integral, discussing backscattering surface and thick atmospheres effects

Veverka, J.↗

NASA NTRS1973

Relationships between remotely sensed fisheries distribution information and selected oceanographic parameters in the Mississippi Sound

The author has identified the following significant results. A feasibility study to demonstrate the potential of satellites for providing fisheries significant information was conducted in the Mississippi Sound and adjacent offshore waters. Attempts were made to relate satellite acquired imagery to selected oceanographic parameters and then to relate these parameters to aircraft remotely sensed distribution patterns of resident surface schooling fishes. Initial results suggest that this approach is valid and that the satellite acquired imagery may have important fisheries resource assessment implications.

Kemmerer, A. J.↗

NASA NTRS1973

Investigation using data from ERTS to develop and implement utilization of living marine resources

Stevenson, W. H.↗

NASA NTRS1973

Relationships between remotely sensed fisheries distribution information and selected oceanographic parameters in the Mississippi Sound

A feasibility study to demonstrate the potential of satellites for providing fisheries significant information was conducted in the Mississippi Sound and adjacent offshore waters. Attempts were made to relate satellite acquired imagery to selected oceanographic parameters and then to relate these parameters to aircraft remotely sensed distribution patterns of resident surface schooling fishes. Initial results suggest that this approach is valid and that the satellite acquired imagery may have important fisheries resource assessment implications.

Kemmerer, A. J.↗