Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Gd 12 Co 5.3 Bi and Gd 12 Co 5 Bi, Crystalline Doppelgänger with Low Thermal Conductivities

Attempts to prepare Gd 12 Co 5 Bi, a member of the rare-earth (RE) intermetallics RE 12 Co 5 Bi, which were identified by a machine-learning recommendation engine as potential candidates for thermoelectric materials, led instead to formation of the new compound Gd 12 Co 5.3 Bi with a very similar composition. Phase equilibria near the Gd-rich corner of the Gd–Co–Bi phase diagram were elucidated by both lab-based and variable-temperature synchrotron powder X-ray diffraction, suggesting that Gd 12 Co 5.3 Bi and Gd 12 Co 5 Bi are distinct phases. The higher symmetry structure of Gd12Co5.3Bi (cubic, space group $Im\bar{3}$, Z = 2, a = 9.713(6) Å), as determined from single-crystal X-ray diffraction, is closely related to that of Gd12Co5Bi (tetragonal, space group Immm). Single Co atoms and Co–Co dumbbells are disordered with occupancies of 0.78(2) and 0.22(2), respectively, in Gd 12 Co 5.3 Bi, but they are ordered in Gd 12 Co 5 Bi. Consistent with this disorder, the electrical resistivity shows less dependence on temperature for Gd 12 Co 5.3 Bi than for Gd 12 Co 5 Bi. The thermal conductivity is low and reaches 2.8 W m –1 K –1 at 600 °C for both compounds; however, the temperature dependence of the thermal conductivity differs, decreasing for Gd 12 Co 5.3 Bi and increasing for Gd 12 Co 5 Bi as the temperature increases. Here, the unusual trends in thermal properties persist in the heat capacity, which decreases below 2R, and in the thermal diffusivity, which increases at higher temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parametric Study for use of Stainless Steel as a Material for Thermal Shield in PIP2IT Transferline at Fermilab

Transferline thermal shields are cooled by dedicated cooling lines welded/brazed to the shield at a single point along the circumference. Copper/Aluminium is widely used to fabricate thermal shields because of their higher thermal diffusivity. This causes uniformity of temperature along the surface of the shield thus reducing thermal stresses within allowable values. However, factors such as raw material price, the cost of fabrication depending on standard sizes of pipes/tubes, often drives up the final price of thermal shields. To reduce the cost by making use of easily available stock of standard pipe/tube, it is decided to use stainless steel as a material for thermal shields in the PIP2IT transferline. The present paper discusses the design approach, various factors affecting the conservative selection of thermal shield design.

43 PARTICLE ACCELERATORS↗

Thermal conductivity of earth materials at high temperatures.

The total thermal conductivity (lattice plus radiative) of several important earth materials is measured in the temperature range from 500 to 1900 K. A new technique is used in which a CO2 laser generates a low-frequency temperature wave at one face of a small disk-shaped sample, and an infrared detector views the opposite face to detect the phase of the emerging radiation. Phase data at several frequencies yield the simultaneous determination of the thermal diffusivity and the mean extinction coefficient of the material. The lattice, radiative, and total thermal conductivities are then calculated. Results for single-crystal and polycrystalline forsterite-rich olivines and an enstatite indicate that, even in relatively pure large-grained material, the radiative conductivity does not increase rapidly with temperature. The predicted maximum total thermal conductivity at a depth of 400 km in an olivine mantle is 0.020 cal/cm/sec/deg C, which is less than twice the surface value.

Schatz, J. F.↗

Update on NNL TSL Evaluations and Validation [Slides]

12 new/revised TSL evaluations were contributed to ENDF/B-VIII.1. The thermal diffusion length $L$ is an integral property of a single material’s absorption and scattering cross sections (both differential and integral). No other neutron reactions or materials are involved. The MC21-calculated $L$ for water is consistent with the spread of experimental data and is sufficiently sensitive to different H-H 2 O TSL physics models to use the method as a TSL integral performance benchmark. Modern high-quality diffusion experiments at elevated $T$ would allow direct low-cost physics benchmarking of water TSLs when public elevated-$T$ critical benchmarks are limited. NNL is working with LLNL and RPI to develop experimental PNDA capability. An ICSBEP Fundamental Physics benchmark of the Nassar and Murphy PNDA experiment is being developed to provide an example of how to evaluate these type of benchmarks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Linear viscous stability analysis of the stratified Bickley jet

The stability of the stably stratified Bickley jet to small disturbances in a viscous, heat conducting fluid is explored by numerical integration of the governing differential equation. Curves of neutral stability are presented in the alpha-R plane and the parametric dependence of these curves upon Richardson number and Prandtl number is examined. The results show a curious bimodal behavior of the curve of neutral stability for small Richardson numbers. In addition, closed neutral curves are found for Richardson numbers in excess of the critical value for the inviscid flow. The unstable regions in the interior of these curves increase with decreasing Prandtl number. Energy balances are computed which show the relative magnitude of the Reynolds stress production, buoyancy dissipation, and viscous dissipation terms across the flow. As the thermal diffusivity becomes large compared with the kinematic viscosity, the buoyancy term is suppressed and the thermal stratification becomes irrelevant.

Gage, K. S.↗

Modeling of hydrogen-air diffusion flame

Work performed during the first six months of the project duration for NASA Grant (NAG-1-861) is reported. An analytical and computational study of opposed jet diffusion flame for the purpose of understanding the effects of contaminants in the reactants and thermal diffusion of light species on extinction and reignition of diffusion flames is in progress. The methodologies attempted so far are described.

Isaac, K. M.↗

Modeling of hydrogen-air diffusion flame

An analytical and computational study of opposed jet diffusion flame for the purpose of understanding the effects of contaminants in the reactants and thermal diffusion of light species on extinction and reignition of diffusion flames is in progress. The methodologies that have been attempted so far are described. Results using a simple, one-step reaction for the hydrogen-air counterflow diffusion flame are presented. These results show the correct trends in the profiles of chemical species and temperature. The extinction limit can be clearly seen in the plot of temperature vs. Damkohler number.

Isaac, K. M.↗

Long lifetime of thermally excited magnons in bulk yttrium iron garnet

Spin currents are generated within the bulk of magnetic materials due to heat flow, an effect called intrinsic spin Seebeck. This bulk bosonic spin current consists of a diffusing thermal magnon cloud, parametrized by the magnon chemical potential (μ m ), with a diffusion length of several microns in yttrium iron garnet (YIG). Transient optothermal measurements of the spin-Seebeck effect (SSE) as a function of temperature reveal the time evolution of μ m due to intrinsic SSE in YIG. The interface SSE develops at times <2 ns while the intrinsic SSE signal continues to evolve at times >500 μs, dominating the temperature dependence of SSE in bulk YIG. Time-dependent SSE data are fit to a multitemperature model of coupled spin/heat transport using the finite-element method (FEM), where the magnon spin lifetime (τ) and magnon-phonon thermalization time (τ mp ) are used as fit parameters. From 300 to 4 K, τ mp ) varies from 1 to 10 ns, whereas tau varies from 2 to 60 μ s with the spin lifetime peaking at 90 K. At low temperature, a reduction in τ is observed consistent with impurity relaxation reported in ferromagnetic resonance measurements. Finally, these results demonstrate that the thermal magnon cloud in YIG contains extremely low-frequency magnons (similar to 10 GHz), providing spectral insight to the microscopic scattering processes involved in magnon spin/heat diffusion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Protection heater design validation for the LARP magnets using thermal imaging

Protection heaters are essential elements of a quench protection scheme for high-field accelerator magnets. Various heater designs fabricated by LARP and CERN have been already tested in the LARP high-field quadrupole HQ and presently being built into the coils of the high-field quadrupole MQXF. In order to compare the heat flow characteristics and thermal diffusion timescales of different heater designs, we powered heaters of two different geometries in ambient conditions and imaged the resulting thermal distributions using a high-sensitivity thermal video camera. We observed a peculiar spatial periodicity in the temperature distribution maps potentially linked to the structure of the underlying cable. Two-dimensional numerical simulation of heat diffusion and spatial heat distribution have been conducted, and the results of simulation and experiment have been compared. Imaging revealed hot spots due to a current concentration around high curvature points of heater strip of varying cross sections and visualized thermal effects of various interlayer structural defects. Furthermore, thermal imaging can become a future quality control tool for the MQXF coil heaters.

43 PARTICLE ACCELERATORS↗

Measurements on the Diffusion Length of Thermal Neutrons in Water from 25 to 296°C

Here, the diffusion length of thermal neutrons has been measured in water over the range 25.9 to 295.3°C in the pressure vessel of the KAPL High Temperature Critical Assembly. The diffusion length was determined by fitting an exponential to the data found by activating manganese foils with neutrons from a small Sb-Be source. The temperature variation of the diffusion length could be fairly well represented by either of two simple approximations—either that the transport cross section of water has a 1/υ behavior, or that the transport cross section is determined from the Radkowsky prescription.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simulation of radiation driven fission gas diffusion in UO 2 , ThO 2 and PuO 2

Below 1000 K it is thought that fission gas diffusion in nuclear fuel during irradiation occurs through atomic mixing due to radiation damage. Here we present a molecular dynamics (MD) study of Xe, Kr, Th, U, Pu and O diffusion due to irradiation. It is concluded that the ballistic phase does not sufficiently account for the experimentally observed diffusion. Thermal spike simulations are used to confirm that electronic stopping remedies the discrepancy with experiment and the predicted diffusivities lie within the scatter of the experimental data. Here, our results predict that the diffusion coefficients are ordered such that D* 0 > D* Kr > D* Xe > D* U . For all species >98.5% of diffusivity is accounted for by electronic stopping. Fission gas diffusivity was not predicted to vary significantly between ThO 2 , UO 2 and PuO 2 , indicating that this process would not change greatly for mixed oxide fuels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diffusion coefficients in the envelopes of white dwarfs

The diffusion of elements is a key process in understanding the unusual surface composition of white dwarfs and their spectral evolution. The diffusion coefficients of Paquette et al. have been widely used to model diffusion in white dwarfs. In this work, we perform new calculations of the coefficients of interdiffusion and ionic thermal diffusion with (1) a more advanced model that uses a recent modification of the calculation of the collision integrals that is more suitable for the partially ionized, partially degenerate, and moderately coupled plasma and (2) classical molecular dynamics. The coefficients are evaluated for silicon and calcium in white dwarf envelopes of hydrogen and helium. A comparison of our results with Paquette et al. shows that the latter systematically underestimates the coefficient of interdiffusion yet provides reliable estimates for the relatively weakly coupled plasmas found in nearly all types of stars, as well as in white dwarfs with hydrogen envelopes. In white dwarfs with cool helium envelopes (${T}_{\mathrm{eff}}$ < 15,000 K), the difference grows to more than a factor of two. We also explored the effect of the ionization model used to determine the charges of the ions and found that it can be a substantial source of discrepancy between different calculations. Finally, we consider the relative diffusion timescales of Si and Ca in the context of the pollution of white dwarf photospheres by accreted planetesimals and find factor of ≳3 differences between calculations based on Paquette et al. and our model.

79 ASTRONOMY AND ASTROPHYSICS↗

Materials engineering

Thermal diffusivity measurement, thermoelectric properties of graphite alloys and compounds, superconductivity in tungsten films, and gas pump based on thermal transpiration

Altman, M.↗

Long-term stability and properties of zirconia ceramics for heavy duty diesel engine components

Physical, mechanical, and thermal properties of commercially available transformation-toughened zirconia are measured. Behavior is related to the material microstructure and phase assemblage. The stability of the materials is assessed after long-term exposure appropriate for diesel engine application. Properties measured included flexure strength, elastic modulus, fracture toughness, creep, thermal shock, thermal expansion, internal friction, and thermal diffusivity. Stability is assessed by measuring the residual property after 1000 hr/1000C static exposure. Additionally static fatigue and thermal fatigue testing is performed. Both yttria-stabilized and magnesia-stabilized materials are compared and contrasted. The major limitations of these materials are short term loss of properties with increasing temperature as the metastable tetragonal phase becomes more stable. Fine grain yttria-stabilized material (TZP) is higher strength and has a more stable microstructure with respect to overaging phenomena. The long-term limitation of Y-TZP is excessive creep deformation. Magnesia-stabilized PSZ has relatively poor stability at elevated temperature. Overaging, decomposition, and/or destabilization effects are observed. The major limitation of Mg-PSZ is controlling unwanted phase changes at elevated temperature.

Larsen, D. C.↗

Flash Diffusivity Measurement of Semi-Porous Insulation Material Intended for Radioisotope Thermoelectric Generators

This research involves the analysis of flash-heating data pursuant to find the thermal diffusivity of a semi-porous insulation material (Min-K) that is being considered for use in a radioisotope thermoelectric generator (RTG). An RTG uses radioactive nuclear fuel to produce electricity through a temperature difference imposed on a bimetallic thermocouple. Insulation is required to protect sensitive equipment from high temperatures and to conserve heat in the fuel. Using flash diffusivity temperature data, various simulations were fitted in order to find the most appropriate heat transfer model for the experiments. Four models were allowed to compete and the standard deviation of the residuals were compared for each model in evaluating model performance. The residuals are simply the difference in temperatures between the measurements and the mathematical models at each measurement point.

McMasters, Robert L.↗

Influence of convection on microstructure

In eutectic growth, as the solid phases grow they reject atoms to the liquid. This results in a variation of melt composition along the solid/liquid interface. In the past, mass transfer in eutectic solidification, in the absence of convection, was considered to be governed only by the diffusion induced by compositional gradients. However, mass transfer can also be generated by a temperature gradient. This is called thermotransport, thermomigration, thermal diffusion or the Soret effect. A theoretical model of the influence of the Soret effect on the growth of eutectic alloys is presented. A differential equation describing the compositional field near the interface during unidirectional solidification of a binary eutectic alloy was formulated by including the contributions of both compositional and thermal gradients in the liquid. A steady-state solution of the differential equation was obtained by applying appropriate boundary conditions and accounting for heat flow in the melt. Following that, the average interfacial composition was converted to a variation of undercooling at the interface, and consequently to microstructural parameters. The results obtained show that thermotransport can, under certain circumstances, be a parameter of paramount importance.

Wilcox, William R.↗

Thermophysical properties of germanium for thermal analysis of growth from the melt

The thermal diffusivity of Ge has been measured over a temperature range from 300 C to 1010 C which includes values for the melt. Specific heat has been measured from room temperature to 727 C. Thermal conductivity has been calculated over the same temperature range as the diffusivity measurements. These data are reported along with the best values from the literature for the other parameters which are required to calculate the temperature and convective fields for the growth of germanium by the Bridgman method. These parameters include the specific heat, the viscosity, the emissivity, and the density as a function of temperature.

Crouch, R. K.↗