Search NASA⌕ Search

SEARCH · Search NASA

Results for “total correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Vertical Jump Height is more Strongly Associated with Velocity and Work Performed Prior to Take-off

Vertical jump (VJ) height is commonly used as a measure of athletic capability in strength and power sports. Although VJ has been shown to be a predictor of athletic performance, it is not clear which kinetic ground reaction force (GRF) variables, such as peak force (PF), peak power (PP), peak velocity (PV), total work (TW) or impulse (Imp) are the best correlates. To determine which kinetic variables (PF, PP, PV, TW, and Imp) best correlate with VJ height. Twenty subjects (14 males, 6 females) performed three maximal countermovement VJs on a force platform (Advanced Mechanical Technology, Inc., Watertown, MA, USA). VJ jump height was calculated as the difference between standing reach and the highest reach point measured using a Vertec. PF, PP, PV, TW, and Imp were calculated using the vertical GRF data sampled at 1000 Hz from the lowest point in the countermovement through the concentric portion until take-off. GRF data were normalized to body mass measured using a standard scale (Detecto, Webb City, MO, USA). Correlation coefficients were computed between each GRF variable and VJ height using a Pearson correlation. VJ height (43.4 plus or minus 9.1 cm) was significantly correlated (p less than 0.001) with PF (998 plus or minus 321 N; r=0.51), PP (1997 plus or minus 772 W; r=0.69), PV (2.66 plus or minus 0.40 m (raised dot) s(sup -1); r=0.85), TW (259 plus or minus 93.0 kJ; r=0.82), and Imp (204 plus or minus 51.1 N(raised dot)s; r=0.67). Although all variables were correlated to VJ height, PV and TW were more strongly correlated to VJ height than PF, PP, and Imp. Therefore, since TW is equal to force times displacement, the relative displacement of the center of mass along with the forces applied during the upward movement of the jump are critical determinants of VJ height. PV and TW are key determinants of VJ height, and therefore successful training programs to increase VJ height should focus on rapid movement (PV) and TW by increasing power over time rather than focusing on PF alone.

Bentley, J. R.↗
DOE OSTI2021

Command and Control of Utilities Systems

The utilities systems that encompass the Y-12 National Security Complex are an integral part of the entire campus, and are essential to maintaining critical mission focus for the site. Although the utilities systems each differ in function, the central production and distribution model creates a common thread on which each system is run. Several incidents in FY 2018 and FY 2019 documented a lack of overall systems control and highlighted the need to create a better command system that could maintain system availability and decrease possible impacts to the surrounding environment. An initial system was started in September of 2019 to better control mechanical utility distribution systems. The measurement of the system can be modeled against a standard command and control related incident. The corresponding work hours from a typical control-related incident were used as key component to this system model. System effectiveness is modeled against utility’s incidents that demonstrate a loss of command and control. The increased simulations of the model also document control can only be effectively contained within the stated time (3-5 years) by yielding more engineers to complete alignments, or drastically reducing the amount of time for alignments. The total control points of the model document a clear correlation between alignments, control points, and the amount of man-hours per incident. Current data shows that actual incident man-hours (1.88 manhours/ incident since initial system implementation) are near expected incident man-hours (1.81 manhours/ incident) with command and control for October 2021, which documents a 33.3% reduction in man-hours/incident since initial system implementation. A conclusion can be drawn that focus on increasing the amount of controlled points in the system can reduce incidents and the decrease the amount of non-value added work to employee’s day-to-day lives, while also achieving a culture that enhances and sustains utilities reliability.

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1990

Tropical cyclone-upper atmospheric interaction as inferred from satellite total ozone observations

The Nimbus-7 Total Ozone Mapping Spectrometer (TOMS) was used to map the distribution of total ozone in and around western Atlantic tropical cyclones from 1979 to 1982. It was found that the TOMS-observed total ozone distribution within the subtropics during the tropical cyclone season correlated well with the tropopause topography, similar to earlier middle-latitudinal observations. This relationship made it possible to use TOMS to monitor the propagation of upper-tropospheric subtropical transient waves and the mutual adjustment between the tropical cyclone and the upper-tropospheric waves during their interaction. These total ozone patterns reflected the three-dimensional upper-tropospheric transport processes that were conducive for storm intensification and weakening. It was also found from satellite observations and numerical model simulations that modification of the environmental distribution of total ozone by the tropical cyclones was primarily caused by the secondary circulation associated with the tropical cyclone's outflow jet and the intrusion of stratospheric air in the eyes of tropical cyclones.

Rodgers, Edward B.↗
NASA NTRS1973

Noise comparisons from full-scale fan tests at NASA Lewis Research Center.

The overall aero and acoustic design features of eight 6-foot-diameter, single-stage fans tested in an outdoor acoustic facility are described. A correlation of the acoustic results for subsonic tip-speed fans showed the total sound power to be proportional to the mechanical power imparted to the fan and the specific work performed on the air to within plus or minus 2 dB. The correlation was relatively insensitive to fan design variables over a broad range of operating conditions. Maximum perceived noise levels were generally proportional to the sound power levels with both noise levels exhibiting a relatively unique increase with fan pressure ratio when normalized by the delivered thrust. The spectra of broadband noise attributed to the fan exhibited a bimodal characteristic for most of the fans. A predominant mode centered near the blade-passage tone and another at 8 to 16 times the tone frequency.

Heidmann, M. F.↗
NASA NTRS2002

Analysis of Composite Skin-Stiffener Debond Specimens Using Volume Elements and a Shell/3D Modeling Technique

The debonding of a skin/stringer specimen subjected to tension was studied using three-dimensional volume element modeling and computational fracture mechanics. Mixed mode strain energy release rates were calculated from finite element results using the virtual crack closure technique. The simulations revealed an increase in total energy release rate in the immediate vicinity of the free edges of the specimen. Correlation of the computed mixed-mode strain energy release rates along the delamination front contour with a two-dimensional mixed-mode interlaminar fracture criterion suggested that in spite of peak total energy release rates at the free edge the delamination would not advance at the edges first. The qualitative prediction of the shape of the delamination front was confirmed by X-ray photographs of a specimen taken during testing. The good correlation between prediction based on analysis and experiment demonstrated the efficiency of a mixed-mode failure analysis for the investigation of skin/stiffener separation due to delamination in the adherents. The application of a shell/3D modeling technique for the simulation of skin/stringer debond in a specimen subjected to three-point bending is also demonstrated. The global structure was modeled with shell elements. A local three-dimensional model, extending to about three specimen thicknesses on either side of the delamination front was used to capture the details of the damaged section. Computed total strain energy release rates and mixed-mode ratios obtained from shell/3D simulations were in good agreement with results obtained from full solid models. The good correlations of the results demonstrated the effectiveness of the shell/3D modeling technique for the investigation of skin/stiffener separation due to delamination in the adherents.

Krueger, Ronald↗
DOE OSTI2022

Thermodynamics of the Metal Carbonates and Bicarbonates of Mn, Co, Ni, Cu, and Zn Relevant to Mineral Energetics

The gas phase heats of formation of ground-state MCO 3 , M(HCO 3 ) 2 , and M(HCO 3 )(OH), where M = Mn, Co, Ni, Cu, and Zn, have been predicted using the correlated molecular orbital theory at the CCSD(T) level extrapolated to the complete basis set limit using the Feller–Peterson–Dixon (FPD) approach. Cohesive energies of the carbonates were predicted based on the calculated gas phase and experimental solid heats of formation. Coulombic dissociation energies (CDEs) between metal cations and anions show a near-linear correlation with Shannon metal cation atomic radii, yet no correlation is found with the hardness of these cations. The total reaction dissociation energies (TRDEs) of transition metals are higher than their CDEs for the di-bicarbonates, in contrast to those for Mg and Ca based on our prior work. In addition to differences in the energies needed to prepare the transition metal dications, electron donation from the ligands to the 3d orbitals of open-shell transition metal dications from lone pairs of adjacent O atoms also plays a role. No electron donation from the ligands to the fully occupied 3d orbitals of Zn and Cd was found. Decomposition energies for generating MO, CO 2 , and/or H 2 O were calculated. Gas phase metal exchange energies only partially correlate with the electrochemical series for M(s) → M 2+( aq). The FPD heats of formation were used to benchmark a range of density functional theory exchange–correlation functionals, including those commonly used in solid-state mineral calculations. None of the functionals provided chemical accuracy agreement (±1 kcal/mol) with the FPD results. So, the best agreement with the FPD results is predicted for the $\tau$-HCTH functional with an average unsigned error of 8.3 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2009

Understanding how molecular hydrogen impacts the total dose and dose rate response of linear bipolar circuits

Recent Enhanced Low Dose Rate Sensitivity (ELDRS) investigations carried out by RLP Research, Arizona State University (ASU) and Jet Propulsion Laboratory (JPL) have shown significant differences in the degradation of bipolar micro-circuits with total dose in the presence of molecular hydrogen (H2) in packages. This has a significant impact on radiation hardness assurance and opens up opportunities to improve device performance. The general objectives of this program are to: 1. Determine the extent to which hydrogen contamination affects the total dose and dose rate response of linear bipolar circuits; 2. Develop a model that will enable the prediction of high dose rate (HDR) and low dose rate (LDR) response asymptotes and transition dose rates as a function of total dose, temperature, pressurized hydrogen, defect precursors, and other process dependent variables; 3. Explore the possibility of an accelerated hardness assurance method and possible hardening approaches; and 4. Extend the work to other technologies that have total dose response affected by hydrogen contamination.In this document, we xperimentally demonstrate with test transistors and circuits that hydrogen is correlated with ELDRS in bipolar linear circuits. We show that the amount of hydrogen determines: 1) the total dose response versus dose rate and 2) the transition dose rates between the high and low dose rate responses. The experimental results are supported with a steady state drift/diffusion analytical model as well as modeling calculations using COMSOL Multiphysics.

Pease, Ron↗
DOE OSTI2019

Exceptional hydrogen storage achieved by screening nearly half a million metal-organic frameworks

Few hydrogen adsorbents balance high usable volumetric and gravimetric capacities. Although metal-organic frameworks (MOFs) have recently demonstrated progress in closing this gap, the large number of MOFs has hindered the identification of optimal materials. Here, a systematic assessment of published databases of real and hypothetical MOFs is presented. Nearly 500,000 compounds were screened computationally, and the most promising were assessed experimentally. Three MOFs with capacities surpassing that of IRMOF-20, the record-holder for balanced hydrogen capacity, are demonstrated: SNU-70, UMCM-9, and PCN-610/NU-100. Analysis of trends reveals the existence of a volumetric ceiling at ~ 40 g H 2 L -1 . Surpassing this ceiling is proposed as a new capacity target for hydrogen adsorbents. Counter to earlier studies of total hydrogen uptake in MOFs, usable capacities in the highest-capacity materials are negatively correlated with density and volumetric surface area. Instead, capacity is maximized by increasing gravimetric surface area and porosity. This suggests that property/performance trends for total capacities may not translate to usable capacities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantification of heterogeneous, irreversible lithium plating in extreme fast charging of lithium-ion batteries

Realization of extreme fast charging (XFC, ≤15 minutes) of lithium-ion batteries is imperative for the widespread adoption of electric vehicles. However, dramatic capacity fading is associated with XFC, limiting its implementation. To quantitatively elucidate the effects of irreversible lithium plating and other degradation mechanisms on the cell capacity, it is important to understand the links between lithium plating and cell degradation at both the local and global (over the full cell) scales. Here, we study the nature of local lithium plating after hundreds of XFC cycles (charging C-rates ranging from 4C to 9C) in industrially-relevant pouch cells using spatially resolved X-ray diffraction. Our results reveal a spatial correlation at the mm scale between irreversible lithium plating on the anode, inactive lithiated graphite phases, and local state-of-charge of the cathode. In regions of plated lithium, additional lithium is locally and irreversibly trapped as lithiated graphite, contributing to the loss of lithium inventory (LLI) and to a local loss of active anode material. The total LLI in the cell from irreversibly plated lithium is linearly correlated to the capacity loss in the batteries after XFC cycling, with a non-zero offset originating from other parasitic side reactions. Finally, at the global (cell) scale, LLI drives the capacity fade, rather than electrode degradation. We anticipate that the understanding of lithium plating and other degradation mechanisms during XFC gained in this work will help lead to new approaches towards designing high-rate batteries in which irreversible lithium plating is minimized.

25 ENERGY STORAGE↗
DOE OSTI2021

Restoring broken symmetries for nuclei and reaction fragments

In typical microscopic approaches, particularly when pairing correlations are present, nuclei and nuclear fragments do not have well defined quantum numbers and symmetries should be restored. In this work, I present a formalism for the simultaneous projection of total particle numbers of a nucleus, particle number of reaction fragments, and of the reaction fragment intrinsic spins and of their correlation, and also for their symmetry restored densities and total energies. These formulas for the symmetry restored quantities, are free of any singularities, unlike those in the previously introduced prescriptions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Precise and accurate cosmology with CMB×LSS power spectra and bispectra

With the advent of a new generation of cosmological experiments that will provide high-precision measurements of the cosmic microwave background (CMB) and galaxies in the large-scale structure, it is pertinent to examine the potential of performing a joint analysis of multiple cosmological probes. In this paper, we study the cosmological information content contained in the one-loop power spectra and tree bispectra of galaxies cross-correlated with CMB lensing. We use the FFTLog method to compute angular correlations in spherical harmonic space, applicable for wide angles that can be accessed by forthcoming galaxy surveys. Here, we find that adding the bispectra and cross-correlations with CMB lensing offers a significant improvement in parameter constraints, including those on the total neutrino mass, M ν , and local non-Gaussianity amplitude, ƒ NL . In particular, our results suggest that the combination of the Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST) and CMB-S4 will be able to achieve σ(M ν )=42 meV from galaxy and CMB lensing correlations, and σ(M ν )=12 meV when further combined with the CMB temperature and polarization data, without any prior on the optical depth.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1977

Utility of correlation techniques in gravity and magnetic interpretation

Internal correspondence uses Poisson's Theorem in a moving-window linear regression analysis between the anomalous first vertical derivative of gravity and total magnetic field reduced to the pole. The regression parameters provide critical information on source characteristics. The correlation coefficient indicates the strength of the relation between magnetics and gravity. Slope value gives delta j/delta sigma estimates of the anomalous source. The intercept furnishes information on anomaly interference. Cluster analysis consists of the classification of subsets of data into groups of similarity based on correlation of selected characteristics of the anomalies. Model studies are used to illustrate implementation and interpretation procedures of these methods, particularly internal correspondence. Analysis of the results of applying these methods to data from the midcontinent and a transcontinental profile shows they can be useful in identifying crustal provinces, providing information on horizontal and vertical variations of physical properties over province size zones, validating long wavelength anomalies, and isolating geomagnetic field removal problems.

Chandler, V. W.↗
DOE OSTI2018

Bond Valences and Anharmonicity in Vacancy-Ordered Double Perovskite Halides

We report that anharmonic lattice dynamics are intimately linked with optical and electronic properties in perovskite halides semiconductors. Vacancy-ordered double perovskites are a subset of the perovskite halide family containing isolated octahedral units. The absence of polyhedral connectivity engenders the vacancy-ordered double perovskites with additional degrees of dynamic freedom, which presents an ideal structural framework to study dynamic-property relationships in perovskite halide semiconductors. In the present study, we examine the structure and bonding origins of anharmonicity in the vacancy-ordered double perovskites Cs 2 Sn 1-x Te x I 6 . While X-ray diffraction indicates that all members adopt the cubic vacancy-ordered double perovskite structure, the local coordination environment probed by X-ray pair distribution function (XPDF) analysis reveals asymmetry of the Cs–I/I–I pair correlation that smoothly decreases with increasing tellurium content. Temperature-dependent neutron total scattering suggests that this asymmetry in the PDF occurs due to anharmonic lattice dynamics arising from octahedral tilting and Cs + displacements, as supported by Reverse Monte Carlo simulations of the Cs 2 SnI 6 and Cs 2 TeI 6 end members. We further correlate the trends in asymmetry and anharmonicity with the bond valence sum of the Cs + ion, and find that the anharmonicity vanishes when the bonding preferences of the Cs + are satisfied by the size of the cuboctahedral void. Lastly, this study presents a simple and effective approach for understanding the origin of anharmonicity in vacancy-ordered double perovskite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Combining field and remote sensing data to estimate forest canopy damage and recovery following tropical cyclones across tropical regions

Abstract As tropical forests cycle the most water and carbon, it is crucial to understand the short- and long-term effects of intensifying cyclones on these ecosystems. Soil nutrient status has been shown to moderate forest cyclone responses using field litterfall measurements, but litterfall is one of the multiple cyclone impact metrtics, which may or may not be correlated with one another or with site nutrients. We used remotely sensed vegetation indices to quantify immediate damage and two-year recovery for 42 cases across nine tropical forests in Hawaii, Puerto Rico, Mexico, Australia, and Taiwan affected by 12 cyclones between 2004 and 2017. We tested whether changes in leaf area index (LAI) and enhanced vegetation index (EVI) correlated with changes in litterfall observations and how changes varied with total soil phosphorus (P) concentrations across regions. We compared cyclone-induced changes and recovery of LAI and EVI to litterfall observations compiled in a pantropical meta-analysis. We found large variation in changes in LAI and EVI across forests, with the greatest reductions in LAI (−77%) and EVI (−77%) in Mexico (Jalisco) and Puerto Rico, respectively. LAI ( r = −0.52) and EVI ( r = −0.60) changes correlated with those in litterfall across cases. Post-cyclone data showed recovery of LAI by four months, EVI by two months, and litterfall by ten months. We detected larger changes in LAI and EVI in forests with higher soil P, but these relationships were not significant when accounting for cyclone and site as random effects. Principal component analyses indicated a regional clustering of cases related to their contrasting cyclone regimes, with the frequency and intensity of cyclone events negatively correlated. Overall, remote sensing observations complement but do not substitute for ground observations that reveal cyclone damage and post-cyclone recovery in tropical forests, and soil phosphorus moderates some but not all metrics of stability in response to cyclones.

Bloom, Dellena E. (ORCID:0000000205981747)↗
DOE OSTI2019

Association Between Preoperative Muscle Mass and Intraoperative Bacterial Translocation in Patients Undergoing Hepatectomy, Pancreatoduodenectomy, and Esophagectomy

Purpose: This study investigated the correlation between the fecal profile and muscle mass, which has not been elucidated before. Methods: This study included patients who underwent hepatectomy, pancreatoduodenectomy, or esophagectomy and had fecal samples collected preoperatively and mesenteric lymph nodes (MLNs) harvested intraoperatively to determine the fecal profile and presence of bacteria in the MLNs. Total psoas area (TPA) was measured at the third lumbar vertebra using preoperative computed tomography images. TPA was standardized by body surface area (BSA) using the following equation: standardized TPA (mm{sup 2}/m{sup 2}) (stTPA) = TPA (mm{sup 2})/BSA (m{sup 2}). The fecal concentrations of representative microorganisms and organic acids also were measured. Results: A total of 127 patients undergoing hepatectomy (n = 48), pancreatoduodenectomy (n = 44), and esophagectomy (n = 35) were included. The fecal levels of predominant obligate anaerobes showed a positive correlation with stTPA, whereas that of pathogenic microorganisms showed a negative correlation with stTPA. The fecal concentrations of total short chain fatty acids (the sum of acetic acid, propionic acid, and butyric acid) also showed a positive correlation with stTPA. The stTPA was significantly lower in patients with positive microorganisms in the MLNs (patients with bacterial translocation) compared to those without microorganisms in the MLNs (p = 0.047). Conclusions: This study was the first to demonstrate the association between muscle mass and the fecal profile, as well as their association with bacterial translocation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Transverse momentum fluctuations and their correlation with elliptic flow in nuclear collision

In this article, we propose observables v 0 and v 0 (p T ) which quantify the relative fluctuations in the total transverse momentum at fixed multiplicity. We first study the factorization of the fixed multiplicity momentum dependent two particle correlation function into a product of v 0 ($p^{a}_{T}$) and v 0 ($p^{b}_{T}$) within realistic hydrodynamic simulations. Then we present computations of v 0 (p T ) for different particle types. We determine the relation between the integrated v 0 and previously measured observables, and compare results from a hybrid hydrodynamics based model to experimental data. The effects of bulk viscosity and an initial pre-equilibrium stage on the results are quantified. We find that v 0 is strongly correlated with the initial state entropy per elliptic area, S/A. Using this result, we explain how the observed correlations between the elliptic flow and the transverse momentum (both in simulations and experiment) reflect the initial state correlations between 1/A and ellipticity ε 2 at fixed multiplicity. Furthermore, we argue that the systematic experimental study of v 0 , with the same sophistication as used for the other v n , can contribute significantly to our understanding of quark gluon plasma properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Trends of Alkane Activation on Doped Cobalt (II, III) Oxide from First Principles

The surface doping of a metal oxide can tune its catalytic performance, but it remains unclear how the tuning depends on the dopant type and the surface facet. In this report we study doped Co 3 O 4 (1 1 1) and (3 1 1) surface facets using first-principles density functional theory (DFT) to obtain general descriptors for oxygen reactivity (which include vacancy formation energy and hydrogen adsorption energy) and correlate them to ethane C-H activation energy as a measure of the catalytic performance. The periodic trends of the dopants are investigated for a total of 20 dopants, namely, the elements from K to Ge. We find strong linear correlations between the oxygen reactivity descriptors and the computed energy barriers. We also discover a strong surface facet sensitivity among certain dopants such that different surface orientations and sites lead to different or even the opposite dopant performance. This work provides a useful guide for dopant performance in ethane activation on the two very different Co 3 O 4 surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Uncertainty analysis of steady-state measurements with a hot-filament type calorimetric emissometer

Calorimetric emissometers measure total hemispherical emissivity by measuring the heat transferred from a heated sample to its surroundings under a vacuum. The accuracy of emissometers standardized by the ASTM C835-06 are well understood. This work uses the Guide to the Evaluation of Uncertainty in Measurement (GUM) for the propagation uncertainties for an ASTM compliant emissometer. The GUM method was able to develop a measurement model and expressions to determine the uncertainty for other emissometers of this type. Data on ‘as-received’ Hastelloy X was used to develop a detailed uncertainty analysis of the emissivity measurement. Data on ‘as-received’ SS 347 and sandblasted A387 Gr. 91 and previous data by the group on A508/A533B were used to determine uncertainty over the ranges 0.16 to 0.81. For all samples, relative uncertainties in emissivities varied from 0.77% to 2.5% when using a fluxgate magnetometer sensor (FMS) to measure the DC heating current. Data on Hastelloy X using a Hall-effect sensor for DC current and low alloy steel showed the DC current and voltage across the test section to be dominate sources of uncertainty. When these sources were reduced, the specimen temperature and the surface area of the test sections were main sources of uncertainty in the emissivity, especially at higher temperatures. As thermal expansion of the surface was considered in the calculations, correlation between specimen temperature and surface area was examined. It was found to be a small contribution to emissivity's uncertainty despite the differences in linear CTE and its uncertainty for the materials analyzed in this study. For low temperatures, the chamber temperature can be a significant source of uncertainty if not sufficiently cooled. The GUM was also briefly compared to uncertainty from the 2nd and 3rd expansions of the Taylor series. We found that the results were the same when rounding to two significant figures.

42 ENGINEERING↗