A comparison of FPS-16 and GMD-1 measurements and methods for processing wind data.
Vector winds computed from GMD-1 and FPS-16 radar tracking data indicate accurate wind macro- and mesoscale resolution from GMD data
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Vector winds computed from GMD-1 and FPS-16 radar tracking data indicate accurate wind macro- and mesoscale resolution from GMD data
During the launch and near-earth phase, continuous radio tracking data were acquired from two Viking spacecraft as they receded from earth. Analysis of this data yielded these values for the geocentric gravitational constant GM: 398600.5 + or - 0.1 cu km/sec per sec for Viking 1 and 398600.65 + or - 0.2 cu km/sec per sec for Viking 2. These values include the atmosphere of the earth and are consistent with the currently adopted speed of light (299792.458 km/sec.).
A gravitational model incorporating Seasat altimetry, surface gravimetry, and satellite tracking data has been determined in terms of global spherical harmonics complete to degree and order 50. This model, PGS-3337, uses altimeter data as a dynamic observation of the satellite's height above the sea surface. A solution for the ocean's dynamic topography is recovered simultaneously with the orbit parameters, gravity, and ocean tidal terms. The recovered dynamic topography reveals the global long wavelength circulation of the oceans with a resolution of 2000 km and is very similar to the mean upper ocean dynamic height derived from historical ship observations. The PGS-3337 geoid has an uncertainty of 60 cm rms globally but 25 cm rms over the ocean because of the altimeter measurements. Seasat orbits determined in this solution have an estimated accuracy for the radial position of 20 cm rms. The difference between the altimeter observed sea height and the geoid plus dynamic topography model is 30 cm rms. Contained in these residuals are the sea height variability, as well as errors from the geoid, orbits, tidal models, and altimeter range measurement. This performance level is 2 to 3 times better than that achieved with previous Goddard gravitational models.
Error sources associated with Doppler radar tracking data of lunar satellite orbits taken by Deep Space Instrumentation Facility
In early 2017, a second TASLIMAGE system (TASL 2) was procured from Track Analysis Systems, Ltd. The new device is intended to complement the first system (TASL 1) and to provide redundancy to the original system which was acquired in 2009. The new system functions primarily the same as the earlier system, though with different X-Y stage hardware and a USB link from the camera to the host computer, both of which contribute to a reduction in CR-39 foil imaging time. The camera and image analysis software are identical between the two systems. Neutron dose calculations are performed externally and independent of the imaging system used to collect track data, relying only on the measured recoil proton track density per cm 2 for a set of known-dose CR-39 foils processed in each etch.
The available data on the effects of particle bombardment of lunar rocks are examined, taking into account rare gas data, neutron capture products, radioactive nuclei, and particle tracks. Attention is given to exposure ages, questions concerning the validity of exposure ages, the location of rocks during irradiation, the criteria for valid crater ages, special problems regarding lunar breccias, surface residence times from long lived radioactive nuclei, surface residence times from galactic cosmic ray track data, rocks with simple surface exposure, rocks with complex surface exposure, limits on surface residence times, suntan and subdecimeter ages, erosion rates, and a number of case histories related to exposure age measurements as applied to the problem of the dating of impact events.
Satellite and nonsatellite data available from the National Space Science Data Center are listed. The Satellite Data listing includes the spacecraft name, launch date, and an alphabetical list of experiments. The Non-Satellite Data listing contains ground based data, models, computer routines, and composite spacecraft data. The data set name, data form code, quantity of data, and the time space covered are included in the data sets of both listings where appropriate. Geodetic tracking data sets are also included.
Results of Pioneer Venus Orbiter observations concerning the gravity field of Venus are presented. The gravitational data was obtained from reductions of Doppler radio tracking data for the Orbiter, which is in a highly eccentric orbit with periapsis altitude varying from 145 to 180 km and nearly fixed periapsis latitude of 15 deg N. The global gravity field was obtained through the simultaneous estimation of the orbit state parameters and gravity coefficients from long-period variations in orbital element rates. The global field has been described with sixth degree and order spherical harmonic coefficients, which are capable of resolving the three major topographical features on Venus. Local anomalies have been mapped using line-of-sight accelerations derived from the Doppler residuals between 40 deg N and 10 deg S latitude at approximately 300 km spatial resolution. Gravitational data is observed to correspond to topographical data obtained by radar altimeter, with most of the gravitational anomalies about 20-30 milligals. Simulations evaluating the isostatic states of two topographic features indicate that at least partial isostasy prevails, with the possibility of complete compensation.
This report provides a summary of the high-resolution gravity data obtained from the Pioneer Venus Orbiter radio tracking data. Gravity maps, covering a 70 deg latitude band through 360 deg of longitude, are displayed as line-of-sight and vertical gravity. Topography converted to gravity and Bouguer gravity maps are also shown in both systems. Topography to gravity ratios are made over several regions of the planet. There are markedly different ratios for the Aphrodite area as compared to the Beta and Atla areas.
Two investigations were undertaken to examine possible large scale explosive volcanic deposits on Mars. The first includes an analysis of Viking Infrared Thermal Mapper (IRTM) data covering the vast deposits in the Amazonis, Memnonia, and Aeolis regions. These postulated ignimbrites have been previously mapped, and at least five high resolution nighttime IRTM data tracks cross the deposits. Preliminary analysis of the data covering Amazonis Planitia show that local features have anomalous thermal inertias but the ignimbrites as a whole do not consistently have significantly different thermal inertias from their surroundings. Preliminary photogeologic and IRTM studies of the large and small highland paterae have also begun. The purpose of IRTM studies of postulated Martian explosive volcanic deposits is to determine the physical properties of the proposed ignimbrites. If volcanic deposits are exposed at the surface, high thermal inertias, as are observed for Apollinaris Patera, should be present.
The valve monitoring system is a stand alone unit with network capabilities for integration into a higher level health management system. The system is designed for aiding in failure predictions of high-geared ball valves and linearly actuated valves. It performs data tracking and archiving for identifying degraded performance. The data collection types are cryogenic cycles, total cycles, inlet temperature, body temperature torsional strain, linear bonnet strain, preload position, total travel and total directional changes. Events are recorded and time stamped in accordance with the IRIG B True Time. The monitoring system is designed for use in a Class 1 Division II explosive environment. The basic configuration consists of several instrumentation sensor units and a base station. The sensor units are self contained microprocessor controlled and remotely mountable in three by three by two inches. Each unit is potted in a fire retardant substance without any cavities and limited to low operating power for maintaining safe operation in a hydrogen environment. The units are temperature monitored to safeguard against operation outside temperature limitations. Each contains 902-928 MHz band digital transmitters which meet Federal Communication Commission's requirements and are limited to a 35 foot transmission radius for preserving data security. The base-station controller correlates data from the sensor units and generates data event logs on a compact flash memory module for database uploading. The entries are also broadcast over an Ethernet network. Nitrogen purged National Electrical Manufactures Association (NEMA) Class 4 enclosures are used to house the base-station
The NASA System-Wide Safety (SWS) project and its predecessor projects have been developing Machine Learning (ML) algorithms for commercial aviation safety for many years. These algorithms have been applied to Flight Operations Quality Assurance (FOQA); radar track data (e.g., Threaded Track); and safety reports, including Aviation Safety Reporting System (ASRS) and Aviation Safety Action Plan (ASAP). SWS is working with partners to get access to other data that air carriers provide, such as maintenance data, and has been assisting carriers in working with other data, such as Line Operations Safety Audit (LOSA) data, using manual methods. However, the project has discussed whether there are other data that are not traditionally used in aviation safety analysis that may be useful. This paper discusses four sets of data and models that are not traditionally used in aviation safety but that have shown promise for such use. In the future, we plan to incorporate such data into ML algorithms to use with data that we have used before and determine the additional benefit that is actually achieved under different contexts from the inclusion of these non-traditional data sources.
The paper presents data requirements, tests, and operational procedures to validate the receiver/processor assembly (R/PA) data to the 150 meter level and to calibrate the full capability of the R/PA to the 10 meter level for the Landsat-D/Global Positioning System experiment. Current work includes designing the software for the validation and calibration processes, determining the best methods of calibration using the Ground Space Tracking Data Network (GSTDN), and determining the tracking schedule for GSTDN data to obtain best orbital accuracy.
An Operations Monitor/Control System (OMCS) was developed to support remote ground station equipment. The ground station controls a Tracking Data Relay Satellite (TDRS) relocated to provide coverage in the tracking system's zone of exclusion. The relocated satellite significantly improved data recovery for the Gamma Ray Observatory mission. The OMCS implementation, performed in less than 11 months, was mission critical to TDRS drift operations. Extensive use of Commercial Off The Shelf (COTS) hardware and software products contributed to implementation success. The OMCS has been operational for over 9 months with no significant problems. This paper will share our experiences in OMCS development and integration.
The Magellan and Pioneer Venus Orbiter radiometric tracking data sets have been combined to produce a 60th degree and order spherical harmonic gravity field. The Magellan data include the high-precision X-band gravity tracking from September 1992 to May 1993 and post-aerobraking data up to January 5, 1994. Gravity models are presented from the application of Kaula's power rule for Venus and an alternative a priori method using surface accelerations. Results are given as vertical gravity acceleration at the reference surface, geoid, vertical Bouguer, and vertical isostatic maps with errors for the vertical gravity and geoid maps included. Correlation of the gravity with topography for the different models is also discussed.
The characteristics of a data-aided carrier tracking loop are discussed. The loop signal to noise ratio is improved in a phase-locked loop used for tracking a carrier an angle modulated communications system by a quadrature channel added to the phase locked loop. A d.c. signal derived from the quadrature channel is added to the signal fed back to the voltage controlled oscillator in the otherwise conventional phase-locked loop.
As part of the Apollo-Soyuz Test Project, Apollo was tracked in the satellite-to-satellite tracking mode by ATS-F. The tracking data obtained at occultation of Apollo by the earth has been used in this study to compute atmospheric parameters like pressure and temperature. The results of the numerical inversion have been compared with data from a radiosonde station near the occultation site. Near the surface of the earth, the refractivity computed from occultation data agreed with the radiosonde-derived values to within 3%. A pressure profile deduced from the refractivity profile by using a simplified model of the atmosphere showed good agreement with radiosonde measurements.
Cycles 4 to 54 of TOPEX data have been analyzed through comparisons with the mean sea surface given on the disturbed geophysical data record (GDR). Two inverted barometer correction procedures were considered for the data reduction. One used a constant atmospheric pressure for all data while the one adopted for use, for most computations, introduced a cycle average pressure. The maximum difference between the two estimates was 3.0 cm with a clear annual signal. With the modified correction the TOPEX sea surface was compared to The Ohio State University (OSU) mean sea surface, given on the GDR, to estimate three translations ( delta x = -2.3 cm; delta y = 25.0 cm; delta z = -0.3 cm) and a bias (43.3 cm) between the two surfaces. The only significant translation is delta y which indicates the reference frame of the TOPEX system differs from that used in the OSU mean sea surface system. The bias between the TOPEX mean sea surface and the OSU mean sea surface was used to estimate an equatorial radius of 6,378,136.55 m based on an 18-cm biased estimate of the TOPEX altimeter. Examination of the average difference, by cycle, between the TOPEX sea surface and the OSU mean sea surface suggested a bias change of 3.1 +/- 2.2 mm/yr with a positive sign indicating the average ocean surface is rising or the altimeter measured distance is decreasing. Models were implemented that solved directly for a bias, bias rate annual/semiannual, and tide correction terms. The computations indicated that a simultaneous solution for this bias, bias rate, and annual/semiannual terms gave the most accurate results. Nonsimultaneous solutions led to slightly different bias rate values. The root mean square difference between the TOPEX sea surface and OSU sea surface, after translation and bias correction, was +/- 17 cm for a typical cycle. Some locations were indentified where the difference could reach 2.3 cm and were repeated over several cycles indicating errors in the mean sea surface. Most of the large differences occur in regions lacking altimeter data prior to the TOPEX/POSEIDON mission and/or areas of significant bathymetric signature. Geoid gradients are needed for the reduction of individual track data to a reference track. The accuracy of the determination of such gradients was determined through the comparison of predicted along-track gradients to the observed gradients. Among four mean sea surfaces tested the best agreement was found with the OSU mean sea surface placed on the TOPEX geophysical data record.