SEARCH · Search NASA

Results for “vortex structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Experiments on near-wall structure of three-dimensional boundary layers

Investigations of three-dimensional turbulent boundary layers have shown basic differences between two- and three-dimensional flows. These differences can significantly impact the modeling of three-dimensional flows since many flow models are based on results from two-dimensional boundary layers. In many cases the shear stress vector direction has been shown to lag relative to the direction of the mean velocity gradient as the cross flow grows downstream. Coincidence of these vectors is necessary for a scalar eddy viscosity modeling assumption. A second effect is a reduction in magnitude of the shear stress and/or the shear stress to turbulence energy ratio, a(sub 1). This reduction has been observed in several experiments. Recent numerical simulations also indicate wall-layer structural differences between two- and three-dimensional boundary layers. The differences in structure between two- and three-dimensional boundary layers was also addressed in the experiment of Littell & Eaton. The experiment used two-point correlations to investigate the vortical structures in a three dimensional boundary layer on a spinning disk. It was found that each sign of longitudinal vortex is equally likely to exist, but one sign of vorticity is associated with a structure which is better at producing ejections. The goal of the current investigation is to study the structure of the inner layers. Among other questions, the differences between the effects deduced from the three-dimensional flow simulations and the effects seen in experiments can be examined. The research concentrates on the structure of the wall-layer through flow visualization and direct turbulence measurements down to y(+) = 5.

Flack, Karen A.↗

NASA NTRS2014

Static Aeroelastic and Longitudinal Trim Model of Flexible Wing Aircraft Using Finite-Element Vortex-Lattice Coupled Solution

This paper presents a static aeroelastic model and longitudinal trim model for the analysis of a flexible wing transport aircraft. The static aeroelastic model is built using a structural model based on finite-element modeling and coupled to an aerodynamic model that uses vortex-lattice solution. An automatic geometry generation tool is used to close the loop between the structural and aerodynamic models. The aeroelastic model is extended for the development of a three degree-of-freedom longitudinal trim model for an aircraft with flexible wings. The resulting flexible aircraft longitudinal trim model is used to simultaneously compute the static aeroelastic shape for the aircraft model and the longitudinal state inputs to maintain an aircraft trim state. The framework is applied to an aircraft model based on the NASA Generic Transport Model (GTM) with wing structures allowed to flexibly deformed referred to as the Elastically Shaped Aircraft Concept (ESAC). The ESAC wing mass and stiffness properties are based on a baseline "stiff" values representative of current generation transport aircraft.

Aeroelasticity↗

NASA NTRS2013

Numerical Simulations of Instabilities in Single-Hole Office Elements

An orifice element is commonly used in liquid rocket engine test facilities either as a flow metering device, a damper for acoustic resonance or to provide a large reduction in pressure over a very small distance in the piping system. While the orifice as a device is largely effective in stepping down pressure, it is also susceptible to a wake-vortex type instability that generates pressure fluctuations that propagate downstream and interact with other elements of the test facility resulting in structural vibrations. Furthermore in piping systems an unstable feedback loop can exist between the vortex shedding and acoustic perturbations from upstream components resulting in an amplification of the modes convecting downstream. Such was the case in several tests conducted at NASA as well as in the Ariane 5 strap-on P230 engine in a static firing test where pressure oscillations of 0.5% resulted in 5% thrust oscillations. Exacerbating the situation in cryogenic test facilities, is the possibility of the formation of vapor clouds when the pressure in the wake falls below the vapor pressure leading to a cavitation instability that has a lower frequency than the primary wake-vortex instability. The cavitation instability has the potential for high amplitude fluctuations that can cause catastrophic damage in the facility. In this paper high-fidelity multi-phase numerical simulations of an orifice element are used to characterize the different instabilities, understand the dominant instability mechanisms and identify the tonal content of the instabilities.

Ahuja, Vineet↗

DOE OSTI2019

Giving rise to a set of fractional dipoles using spiral hyperbolic zone plate

We demonstrate a structured spiral hyperbolic zone plate which is able to generate a set of fractional vortex dipoles. The element is created by superimposition of two perpendicular hyperbolic zone plates in horizontal and vertical directions and its phase structure is then modified by adding an azimuthal characteristics factor. By setting different parameters when designing the element, characteristics of the generated FVDs will be changed. We then observed FVDs with different orders and topological charges rotate around the propagation axes upon propagation. This technique provides the possibility to generate multiple FVDs, and can be used in domains where sorting and guiding of small particles are of high interest such as optical tweezers and particle trapping configurations. Numerical and experimental results verify the superior features of SHFZP.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Vortex motion induced losses in tantalum resonators

Tantalum (Ta)-based superconducting circuits have been demonstrated to enable ultrahigh qubit quality factors (𝑄), motivating a careful study of the microscopic origin of the remaining losses that limit their performance. We have recently shown that the losses in Ta-based resonators are dominated by two-level systems at low microwave powers and millikelvin temperatures. We also observe that some devices exhibit loss that is exponentially activated at a lower temperature inconsistent with the superconducting critical temperature (T 𝑐 ) of the constituent film. Specifically, dc resistivity measurements show a T 𝑐 of over 4 K, while microwave measurements of resonators fabricated from these films show losses that increase exponentially with temperature with an activation energy as low as 0.3 K. Here, in this study, we present a comparative study of the structural and thermodynamic properties of Ta-based resonators and identify vortex motion-induced loss as the source of thermally activated microwave loss. Through careful magnetoresistance and x-ray diffraction measurements, we observe that the increased loss occurs for films that are in the clean limit, where the superconducting coherence length (𝜉) is shorter than the mean free path (𝑙). Vortex motion-induced losses are suppressed for films in the dirty limit, which show evidence of structural defects that can pin vortices. We verify this hypothesis by explicitly pinning vortices via patterning, and we find that we can suppress the loss by microfabrication.

36 MATERIALS SCIENCE↗

NASA NTRS1995

Progress in Integrated Fluid/Structure/Controls Computations Using High Fidelity Equations

Aeroelasticity that involves strong coupling of fluids, structures and controls is an important element in designing an aircraft. Computational aeroelasticity using low fidelity methods such as the linear aerodynamic flow equations coupled with the modal structural equations are well advanced. Though these low fidelity approaches are computationally less intensive, they are not adequate for the analysis of aircraft which can experience complex flow/structure interactions. Supersonic transports can experience vortex induced aeroelastic oscillations whereas subsonic transports can experience transonic buffet associated structural oscillations. Both aircraft may experience a dip in the flutter speed at the transonic regime. For accurate aeroelastic computations at these complex fluid/structure interaction situations, high fidelity equations such as the Navier-Stokes for fluids and the finite-elements for structures are needed. Using these high fidelity methods, design quantities such as structural stresses can be directly computed. Computations using these high fidelity equations require state-of-the-art large computational resources. This paper will describe the transition from potential equations to Euler/Navier-Stokes equations for fluids and from modal equations to finite element equations for structures. Complexities associated with grids for moving control surfaces will be discussed. All contents of the paper will be limited to those already presented at domestic conferences within U.S. such as those sponsored by AIAA. It will not include any materials related to HPCCP computational work.

Guruswamy, Guru P.↗

NASA NTRS1991

The dynamics of the stratospheric polar vortex and its relation to springtime ozone depletions

Recent aircraft observations have determined the structure of polar vortices during winter and their relationship to polar ozone depletions, based on high dynamical isolation and the extremely low temperatures required for stratospheric cloud formation. The aircraft data reveal large gradients of potential vorticity and concentrations of conservative trace species at the transition from high-latitude to polar air, implying that the inward mixing of heat and constituents is strongly inhibited, and that the perturbed polar stratospheric chemistry associated with the ozone hole is isolated from the rest of the stratosphere until the vortex breaks up in late spring. It is therefore the overall polar vortex which limits the annual polar ozone depletions' maximum area-coverage.

Schoeberl, Mark R.↗

DOE OSTI2017

Stability of Polar Vortex Lattice in Ferroelectric Superlattices

A novel mesoscale state comprising of an ordered polar vortex lattice has been demonstrated in ferroelectric superlattices of PbTiO 3 /SrTiO 3 . In this study, we employ phase-field simulations, analytical theory, and experimental observations to evaluate thermodynamic conditions and geometric length scales that are critical for the formation of such exotic vortex states. We show that the stability of these vortex lattices involves an intimate competition between long-range electrostatic, long-range elastic, and short-range polarization gradient-related interactions leading to both an upper and a lower bound to the length scale at which these states can be observed. Finally, we found that the critical length is related to the intrinsic domain wall width, which could serve as a simple intuitive design rule for the discovery of novel ultrafine topological structures in ferroic systems.

36 MATERIALS SCIENCE↗

NASA NTRS1994

Progress in Computational Aeroelasticity Using High Fidelity Flow and Structural Equations on Parallel Computers

Aeroelasticity which involves strong coupling of fluids, structures and controls is an important element in designing an aircraft. Computational aeroelasticity using low fidelity methods such as the linear aerodynamic flow equations coupled with the modal structural equations are well advanced. Though these low fidelity approaches are computationally less intensive, they are not adequate for the analysis of modern aircraft such as High Speed Civil Transport (HSCT) and Advanced Subsonic Transport (AST) which can experience complex flow/structure interactions. HSCT can experience vortex induced aeroelastic oscillations whereas AST can experience transonic buffet associated structural oscillations. Both aircraft may experience a dip in the flutter speed at the transonic regime. For accurate aeroelastic computations at these complex fluid/structure interaction situations, high fidelity equations such as the Navier-Stokes for fluids and the finite-elements for structures are needed. Computations using these high fidelity equations require large computational resources both in memory and speed. Current conventional supercomputers have reached their limitations both in memory and speed. As a result, parallel computers have evolved to overcome the limitations of conventional computers. This paper will address the transition that is taking place in computational aeroelasticity from conventional computers to parallel computers. The paper will address special techniques needed to take advantage of the architecture of new parallel computers. Results will be illustrated from computations made on iPSC/860 and IBM SP2 computer by using ENASERO code that directly couples the Euler/Navier-Stokes flow equations with high resolution finite-element structural equations.

Guruswamy, Guru P.↗

NASA NTRS1994

Fluid/Structure Interaction Studies of Aircraft Using High Fidelity Equations on Parallel Computers

Abstract Aeroelasticity which involves strong coupling of fluids, structures and controls is an important element in designing an aircraft. Computational aeroelasticity using low fidelity methods such as the linear aerodynamic flow equations coupled with the modal structural equations are well advanced. Though these low fidelity approaches are computationally less intensive, they are not adequate for the analysis of modern aircraft such as High Speed Civil Transport (HSCT) and Advanced Subsonic Transport (AST) which can experience complex flow/structure interactions. HSCT can experience vortex induced aeroelastic oscillations whereas AST can experience transonic buffet associated structural oscillations. Both aircraft may experience a dip in the flutter speed at the transonic regime. For accurate aeroelastic computations at these complex fluid/structure interaction situations, high fidelity equations such as the Navier-Stokes for fluids and the finite-elements for structures are needed. Computations using these high fidelity equations require large computational resources both in memory and speed. Current conventional super computers have reached their limitations both in memory and speed. As a result, parallel computers have evolved to overcome the limitations of conventional computers. This paper will address the transition that is taking place in computational aeroelasticity from conventional computers to parallel computers. The paper will address special techniques needed to take advantage of the architecture of new parallel computers. Results will be illustrated from computations made on iPSC/860 and IBM SP2 computer by using ENSAERO code that directly couples the Euler/Navier-Stokes flow equations with high resolution finite-element structural equations.

Guruswamy, Guru↗

NASA NTRS1979

Temperature, cloud structure, and dynamics of Venus middle atmosphere by infrared remote sensing from Pioneer Orbiter

Further results from the Venus Orbiter radiometric temperature experiment (VORTEX) on the Pioneer Orbiter are presented. These are used to characterize the three-dimensional temperature field, the cloud structure, and the dynamics of the 60- to 130-kilometer altitude region of the Venus atmosphere. One of the new discoveries is a 'dipole' structure at high latitudes, with two hot spots rotating around the pole, surrounded by banks of cold cloud.

Taylor, F. W.↗

NASA NTRS1986

Coherent structures in a turbulent boundary layer. I - Generation of 'artificial' bursts

In an effort to better understand the physics and structure of coherent events in a turbulent boundary layer, an attempt is made to produce 'artificial' bursts. These are generated in a turbulent boundary layer developed on a flat plate towed in an 18 m water channel and thus with negligible freestream turbulence. The burstlike events are produced by either withdrawing near-wall fluid from two minute holes separated in the spanwise direction or by pitching a miniature delta wing that is flush-mounted to the wall. Either of these two actions generates a hairpinlike vortex and low-speed streak that resemble naturally occurring structures. The resulting sequence of events that occur at a given location can be uniquely controlled, thus allowing detailed examination via phase-locked measurements and flow visualization. In this paper, the proof of concept of artificial burst generation is established by comparing the artificial events with natural, random bursts using flow visualization and hot-film signals.

Gad-El-hak, M.↗

DOE OSTI2025

Gyrokinetic simulations of the effects of magnetic islands on microturbulence in KSTAR

Gyrokinetic simulations are utilized to study effects of magnetic islands (MIs) on the ion temperature gradient (ITG) turbulence in the KSTAR tokamak with resonant magnetic perturbations. Simulations show that the transport is controlled by the nonlinear interactions between the ITG turbulence and self-generated vortex flows and zonal flows, leading to an anisotropic structure of fluctuation and transport on the poloidal plane and in the toroidal direction. MIs greatly enhance turbulent transport of both particle and heat. The turbulent transport exhibits variations in the toroidal direction, with transport through the resonant layer near the island X-point being enhanced when the X-point is located at the outer mid-plane. A quantitative agreement is shown between simulations and KSTAR experiments in terms of time frequency and perpendicular wavevector spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Magnetism and its coexistence with superconductivity in CaK(Fe 0.949 Ni 0.051 ) 4 As 4 : Muon spin rotation/relaxation studies

Here, the magnetic response of Ca K ( Fe 0.949 Ni 0.051 ) 4 As 4 was investigated by means of the muon spin rotation/relaxation. The long-range commensurate magnetic order sets in below the Néel temperature T N = 50.0 ( 5 ) K. The density-functional theory calculations have identified three possible muon stopping sites. The experimental data were found to be consistent with only one type of magnetic structure, namely, the long-range magnetic spin-vortex-crystal order with the hedgehog motif within the a b plane and the antiferromagnetic stacking along the c direction. The value of the ordered magnetic moment at T ≈ 3 K was estimated to be m Fe = 0.38 ( 11 ) μ B ( μ B is the Bohr magneton). A microscopic coexistence of magnetic and superconducting phases accompanied by a reduction of the magnetic order parameter below the superconducting transition temperature T c ≃ 9 K is observed. Comparison with 11, 122, and 1144 families of Fe-based pnictides points to existence of correlation between the reduction of the magnetic order parameter at T → 0 and the ratio of the transition temperatures T c / T N . Such correlations were found to be described by Machida's model for coexistence of itinerant spin-density-wave magnetism and superconductivity [K. Machida, J. Phys. Soc. Jpn. 50 , 2195 (1981) ; S. L. Bud'ko et al. , Phys. Rev. B 98 , 144520 (2018) ].

36 MATERIALS SCIENCE↗

NASA NTRS1973

Experiments on confined turbulent jets in cross flow.

Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-domensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.

Kamotani, Y.↗

NASA NTRS1974

Experiments on confined turbulent jets in cross flow

Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-dimensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.

Kamotani, Y.↗

NASA NTRS1980

Conditional sampling technique to test the applicability of the Taylor hypothesis for the large-scale coherent structures

Comparisons of the distributions of large scale structures in turbulent flow with distributions based on time dependent signals from stationary probes and the Taylor hypothesis are presented. The study investigated an area in the near field of a 7.62 cm circular air jet at a Re of 32,000, specifically having coherent structures through small-amplitude controlled excitation and stable vortex pairing in the jet column mode. Hot-wire and X-wire anemometry were employed to establish phase averaged spatial distributions of longitudinal and lateral velocities, coherent Reynolds stress and vorticity, background turbulent intensities, streamlines and pseudo-stream functions. The Taylor hypothesis was used to calculate spatial distributions of the phase-averaged properties, with results indicating that the usage of the local time-average velocity or streamwise velocity produces large distortions.

Hussain, A. K. M. F.↗

NASA NTRS1987

Numerical simulation of three-dimensional unsteady vortex flow using a compact vorticity-velocity algorithm

A numerical algorithm is presented which is used to solve the unsteady, fully three-dimensional, incompressible Navier-Stokes equations in vorticity-velocity variables. A discussion of the discrete approximation scheme is presented as well as the solution method used to solve the resulting algebraic set of difference equations. Second order spatial and temporal accuracy is verified through solution comparisons with exact results obtained for steady three-dimensional stagnation point flow and unsteady axisymmetric vortex spin-up. In addition, results are presented for the problem of unsteady bubble-type vortex breakdown with emphasis on internal bubble dynamics and structure.

Gatski, T. B.↗