Search NASA⌕ Search

SEARCH · Search NASA

Results for “Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Effect of applied mechanical stress on absorption coefficient of compounds

The absorption coefficient of given materials is the parameter required for the basic information. The measurement of absorption coefficient of compounds Al{sub 2}O{sub 3}, CaCO{sub 3}, ZnO{sub 2}, SmO{sub 2} and PbO has been taken at different incident photon energies 26, 59.54, 112, 1173, 1332keV. The studies involve the measurements of absorption coefficient of the self supporting samples prepared under different mechanical stress. This mechanical stress is render in terms of pressure up to 0-6 ton by using hydraulic press. Measurements shows that absorption coefficient of a material is directly proportional to applied mechanical stress on it up to some extent then become independent. Experimentally measured results are in fairly good agreement with in theoretical values obtained from WinXCOM.

36 MATERIALS SCIENCE↗

Possible atomic structures responsible for the sub-bandgap absorption of chalcogen-hyperdoped silicon

Single-crystal silicon was hyperdoped with sulfur, selenium, and tellurium using ion implantation and nanosecond laser melting. The hyperdoping of such chalcogen elements led to strong and wide sub-bandgap light absorption. Annealing the hyperdoped silicon, even at low temperatures (such as 200–400 °C), led to attenuation of the sub-bandgap absorption. To explain the attenuation process, we modeled it as chemical decomposition reaction from an optically absorbing structure to a non-absorbing structure. Attenuation of the experimental absorption coefficient was fit using the Arrhenius equation. From the fitted data, we extracted the reaction activation energies of S-, Se-, and T-hyperdoped silicon as 0.338 ± 0.029 eV, 0.471 ± 0.040 eV, and 0.357 ± 0.028 eV, respectively. We discuss these activation energies in terms of the bond energies of chalcogen–Si metastable bonds, and suggest that several high-energy interstitial sites, rather than substitutional sites, are candidates for the atomic structures that are responsible for the strong sub-bandgap absorption of chalcogen hyperdoped silicon.

36 MATERIALS SCIENCE↗

Correlation between laser absorption and radiation conversion efficiency in laser produced tin plasma

The correlation between the laser absorption and the conversion efficiency (CE) for 13.5 nm extreme ultraviolet (EUV) light in a laser-produced tin plasma was investigated. The absorption rate α and the CE were measured simultaneously for a laser-pre-formed low-density tin target as a function of the time delay between the pre-pulse and the main laser pulse. A clear and positive correlation between α and CE was found with increasing delay time; however, the CE decreases rapidly at longer delay times. This result is partly attributed to a reduction in the absorption rate, but is mainly attributed to the self-absorption of EUV light in excessively long-scale plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Perfect electromagnetic absorption at one-atom-thick scale

We experimentally demonstrate that perfect electromagnetic absorption can be realized in the one-atom thick graphene. Employing coherent illumination in the waveguide system, the absorbance of the unpatterned graphene monolayer is observed to be greater than 94% over the microwave X-band, 7–13 GHz, and to achieve a full absorption, >99% in experiment, at ∼8.3 GHz. In addition, the absorption characteristic manifests equivalently a wide range of incident angle. The experimental results agree very well with the theoretical calculations. Our work accomplishes the broadband, wide-angle, high-performance absorption in the thinnest material with simple configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Absorption spectroscopy of heavy alkaline earth metals Ba and Sr in rare gas matrices—CCSD(T) calculations and atomic site occupancies

Isolation of the heavier alkaline earth metals Ba and Sr in the solid rare gases (RGs) Ar, Kr, and Xe is analysed with absorption spectroscopy and interpreted partly with the assistance of ab initio calculations of the diatomic M ⋅ RG ground state interaction potentials. The y{sup 1}P←a{sup 1}S resonance transitions in the visible spectral region are used to compare the isolation conditions of these two metal atom systems and calcium. Complex absorption bands were recorded in all three metal atom systems even after extensive sample annealing. Coupled cluster calculations conducted on the ground states of the nine M ⋅ RG diatomics (M = Ca, Sr, and Ba; RG = Ar, Kr, and Xe) at the coupled cluster single, double, and non-iterative triple level of theory revealed long bond lengths (>5 Å) and shallow bound regions (<130 cm{sup −1}). All of the M ⋅ RG diatomics have bond lengths considerably longer than those of the rare gas dimers, with the consequence that isolation of these metal atoms in a single substitutional site of the solid rare gas is unlikely, with the possible exception of Ca/Xe. The luminescence of metal dimer bands has been recorded for Ba and Sr revealing very different behaviours. Resonance fluorescence with a lifetime of 15 ns is observed for the lowest energy transition of Sr{sub 2} while this transition is quenched in Ba{sub 2}. This behaviour is consistent with the absence of vibrational structure on the dimer absorption band in Ba{sub 2} indicating lifetime broadening arising from efficient relaxation to low-lying molecular states. More extensive 2D excitation-emission data recorded for the complex site structures present on the absorption bands of the atomic Ba and Sr systems will be presented in future publications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced microwave-to-terahertz absorption in graphene

Fresnel equations predict that an ultrathin free standing conductive film, thousands times thinner than skin depth, is capable to absorb up to 50% of incident electromagnetic radiations. In the microwave range, the same holds true for a free standing graphene sheet. We demonstrate theoretically and prove experimentally that microwave absorptance of graphene can be enhanced considerably by depositing graphene on a dielectric substrate. On the experimental side, we obtain 80% and 65% absorptance at 30 GHz and 1 THz, respectively. Theory predicts that higher absorptance can be achieved with a suitable choice of the dielectric permittivity and the thickness of the substrate. Absorption can also be maximized by choosing the optimum incidence angle for s-polarized waves in free space or by working in the vicinity of the cut-off frequency of the transverse electric mode in waveguide configuration. The polarization sensitivity of the transmittance and reflectance of graphene layers can be used to tune the polarization state of the transmitted and reflected radiations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable angle absorption of hyperbolic metamaterials based on plasma photonic crystals

We present the design of a multilayer structure of hyperbolic metamaterials based on plasma photonic crystals which composed of two kinds of traditional dielectric and plasma. The relative permittivity of hyperbolic metamaterials has been studied at certain frequency range. The absorption and reflection of the multilayer period structure at normal and oblique incident have been investigated by the transfer matrix method. We discussed that the absorption is affected by the thickness of material and the electron collision frequency γ of the plasma. The results show that an absorption band at the low frequency can be obtained at normal incident angle and another absorption band at the high frequency can be found at a large incident angle. The results may be applied by logical gate, stealth, tunable angle absorber, and large angle filter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Infrared absorption of hydrogen-related defects in ammonothermal GaN

Polarization controlled Fourier transform infrared (FTIR) absorption measurements were performed on a high quality m-plane ammonothermal GaN crystal grown using basic chemistry. The polarization dependence of characteristic absorption peaks of hydrogen-related defects at 3000–3500 cm{sup −1} was used to identify and determine the bond orientation of hydrogenated defect complexes in the GaN lattice. Majority of hydrogen was found to be bonded in gallium vacancy complexes decorated with one to three hydrogen atoms (V{sub Ga}-H{sub 1,2,3}) but also hydrogenated oxygen defect complexes, hydrogen in bond-center sites, and lattice direction independent absorption were observed. Absorption peak intensity was used to determine a total hydrogenated V{sub Ga} density of approximately 4 × 10{sup 18} cm{sup −3}, with main contribution from V{sub Ga}-H{sub 1,2}. Also, a significant concentration of electrically passive V{sub Ga}-H{sub 3} was detected. The high density of hydrogenated defects is expected to have a strong effect on the structural, optical, and electrical properties of ammonothermal GaN crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solvent effects on the absorption spectrum and first hyperpolarizability of keto-enol tautomeric forms of anil derivatives: A Monte Carlo/quantum mechanics study

Theoretical results for the absorption spectrum and electric properties of the enol and keto tautomeric forms of anil derivatives in the gas-phase and in solution are presented. The electronic properties in chloroform, acetonitrile, methanol, and water were determined by carrying out sequential Monte Carlo simulations and quantum mechanics calculations based on the time dependent density functional theory and on the second-order Møller–Plesset perturbation theory method. The results illustrate the role played by electrostatic interactions in the electronic properties of anil derivatives in a liquid environment. There is a significant increase of the dipole moment in solution (20%-100%) relative to the gas-phase value. Solvent effects are mild for the absorption spectrum and linear polarizability but they can be particularly important for first hyperpolarizability. A large first hyperpolarizability contrast between the enol and keto forms is observed when absorption spectra present intense lowest-energy absorption bands. Dynamic results for the first hyperpolarizability are in qualitative agreement with the available experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Communication: XUV transient absorption spectroscopy of iodomethane and iodobenzene photodissociation

Time-resolved extreme ultraviolet (XUV) transient absorption spectroscopy of iodomethane and iodobenzene photodissociation at the iodine pre-N{sub 4,5} edge is presented, using femtosecond UV pump pulses and XUV probe pulses from high harmonic generation. For both molecules the molecular core-to-valence absorption lines fade immediately, within the pump-probe time-resolution. Absorption lines converging to the atomic iodine product emerge promptly in CH{sub 3}I but are time-delayed in C{sub 6}H{sub 5}I. We attribute this delay to the initial π → σ{sup *} excitation in iodobenzene, which is distant from the iodine reporter atom. We measure a continuous shift in energy of the emerging atomic absorption lines in CH{sub 3}I, attributed to relaxation of the excited valence shell. An independent particle model is used to rationalize the observed experimental findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Order and disorder and their influences on optical absorption of glasses in the gap region

The exponential increase of the absorption coefficient near the absorption edge is usually explained by existence of the density-of-states tails. Among the quoted theoretical models which are widely used to explain the manifestations of the Urbach rule in semiconductors, are the Sumi–Toyozava and the Dow–Redfield models and ab initio (from beginning) theory. Our barrier-cluster-heating model assumes the different creating mechanism of exponential tails. The energy by optical transition is provided to electrons except from photons also from vibration of microregion. It deals about the replenishment of absented photons energy, which is smaller as gap width. Absented energy needed for the transition by light absorption is accumulated in certain microregions of material in the form of vibrational energy. At absorption sufficiently big package of accumulated energy can be used. Energy of emptied microarea is filled by phonons from surrounding of microarea (as result of temperature status of surrounding), resp. phonons of optical background which are created in given microarea at non radiative recombination of carriers. In this work simplified process at derivating of Urbach rule is listed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of excitation temperature of a laser-produced plasma by combining emission and absorption spectroscopy

Measurement of the temporal evolution of laser-produced plasma temperature is very important for many of its applications, and several plasma diagnostic tools are routinely used by researchers. However, it is very challenging to measure the properties of the plasma at the early and late times of its evolution using a single diagnostic tool. In this study, we combined emission and laser absorption spectroscopy to compare the excitation temperatures of a laser-produced uranium plasma system. Several U I transitions in the near-infrared spectral range (775–800 nm) were considered, and the Boltzmann plot method was used to measure the excitation temperatures using both emission and absorption spectroscopy. Emission spectroscopy provided early-time temperature measurements of the plasma up to times 2–20 µs, while absorption spectroscopy provided temperature measurements at late times of plasma evolution (for times 5–80 µs). The emission and absorbance of U I transitions were found to follow the Boltzmann distribution, indicating the plasma is likely in the state of local thermodynamic equilibrium even at late times of its lifetime. The emission and absorption-based time-resolved excitation temperatures demonstrated good agreement at earlier times (≤15 µs) in the overlapped temporal region, while a deviation in the measured values was seen at times (≥15 µs), and potential reasons for such a disagreement are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Opto-acoustic measurement of the local light absorption coefficient in turbid media: 1. Monte-Carlo simulation of laser fluence distribution at the beam axis beneath the surface of a turbid medium

A new method for measuring the local light absorption coefficient in turbid media, for example, biological tissues, is proposed. The method is based on the fact that the amplitude of the excited opto-acoustic (OA) signal is proportional to the absorbed laser power density (the product of the light absorption coefficient and the laser fluence) at the medium interface. In the first part of the paper, the influence of the laser beam diameter, the light absorption and reduced scattering coefficients on the maximal amplitude of the laser fluence at the laser beam axis in the near-surface layer of the turbid medium is studied by using the Monte-Carlo simulation. The conditions are predicted under which the amplitude of the OA signal detected in a transparent medium in contact with the scattering medium should remain proportional to the light absorption coefficient of the medium under study, when the scattering coefficient in it changes more than twice. The results of the numerical simulation are used for the theoretical substantiation of the OA method being proposed. (measurement of parametrs of laser radiation)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transient light absorption induced in glassby femtosecond laser pulses

The dynamics of the transient light absorption induced in K8 optical glass by filamented femtosecond laser pulses have been studied using time-resolved transmitted-light microscopy at wavelengths from 450 to 700 nm. The transient absorption measured as a function of probe beam wavelength is compared to that predicted by the Drude plasma model. We conclude that, just 450 fs after a pump pulse, the transient absorption is dominated by transient electronic states, presumably, self-trapped excitons, with an excitation energy of 2.6 - 2.7 eV. These states are filled with free-carriers from a long-lived plasma, which acts as a 'carrier reservoir'. The relaxation of transient absorption has two components. The slow component, with {tau}{sub 1} {approx} 17-17.5 ps, is governed by the plasma thermalisation time, whereas the second, with {tau}{sub 1} >> 300 ps, is determined by the plasma lifetime. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the absorption line profiles of water vapour isotopomers at 1.39 {mu}m using the methods of diode laser spectroscopy

The issues related to high-precision measurement of the absorption line profiles of water vapour and its isotopomers using the methods of diode laser spectroscopy in the near IR range aimed at the analysis and detection of greenhouse gases are considered. The absorption line shape of H{sub 2}{sup 16}O is investigated as a function of pressure of different buffer gases. The influence of the instrument function of the diode laser (DL) on the precision of measuring the line profile is studied. From fitting the profile of Doppler-broadened H{sub 2}{sup 16}O absorption line to a model profile the lasing line width of the DL with a fibre pigtail is determined. The frequencies and intensities of absorption lines of water isotopomers H{sub 2}{sup 16}O, H{sub 2}{sup 17}O, H{sub 2}{sup 18}O, and HDO are measured in the range of DL oscillation. Analytical spectral regions are chosen for distant probing of water vapour using an airborne lab. (laser spectroscopy)

74 ATOMIC AND MOLECULAR PHYSICS↗

Recording of absorption spectra by a three-beam integral technique with a tunable laser and external cavity

An integral method is considered for recording absorption using three laser beams transmitted through and reflected from an external cavity with the absorbing medium (R-ICOS). The method is the elaboration of a known single-beam ICOS method and allows suppression of the influence of radiation phase fluctuations in the resonator on recording weak absorption spectra. First of all, this reduces high-frequency instabilities and gives a possibility to record spectra during short time intervals. In this method, mirrors of the resonator may have moderate reflection coefficients. Capabilities of the method have been demonstrated by the examples of weak absorption spectra of atmospheric methane and natural gas in a spectral range around 1650 nm. With the mirrors having the reflection coefficients of 0.8–0.99, a spectrum can be recorded for 320 μs with the accuracy sufficient for detecting a background concentration of methane in atmosphere. For the acquisition time of 20 s, the absorption coefficients of ∼2×10{sup -8} cm{sup -1} can be measured, which corresponds to a 40 times less molecule concentration than the background value. (laser spectroscopy)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Absorption of pulsed laser radiation by composites based on hexogen and aluminium nanoparticles

Absorption of the second-harmonic radiation from a pulsed YAG : Nd {sup 3+} laser by composites based on hexogen and aluminium nanoparticles (of a diameter 100 nm) is theoretically and experimentally investigated. The absorption efficiency factor (the ratio of the light absorption cross section to the geometrical cross section) is calculated by using the Mie theory for Al inclusions in a hexogen medium for various particle diameters and wavelengths corresponding to laser fundamental and second-harmonic radiation. Dependences of the absorption coefficient and amplitude of an acoustic signal on the concentration of inclusions under laser irradiation of composite samples are measured by using a piezo-acoustic transducer. It is shown that the radiation is directly absorbed by nanoparticles. The optimal concentration is found, which provides the maximal signal of the piezo-acoustic transducer. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Arsenic in Ironite fertilizer: The absorption by hamsters and the chemical form

We determined the gastrointestinal absorption of the arsenic in Ironite, a readily available fertilizer, for male hamsters (Golden Syrian), considered to be an excellent model for how the human processes inorganic arsenic. Urine and feces were collected after administering an aqueous suspension of Ironite by stomach tube. In addition, we studied the forms and oxidation states of arsenic in Ironite by synchrotron spectroscopic techniques. The absorption of the arsenic in Ironite (1-0-0) was 21.2% and the absorption relative to sodium arsenite was 31.0%. Our results using XANES spectra determinations indicate that Ironite contains scorodite (AsV) as well as previously reported arsenopyrite (As(-1)). Since the 1-0-0 Ironite is readily available for purchase, its risk assessment for children by professionals is recommended. This is especially important because it is used to fertilize large areas of grass in playgrounds and parks where children play. The absorption of the arsenic in it, the hand to mouth activity of children, and the potential of ground water contamination makes the use of 1-0-0 Ironite as a fertilizer a potential environmental hazard.

59 BASIC BIOLOGICAL SCIENCES↗