Search NASA⌕ Search

SEARCH · Search NASA

Results for “Best”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Estuarine and coastal water dynamics controlling sediment movement and plume development in Long Island Sound

The author has identified the following significant results. As the Connecticut River flows into Long Island Sound, large plumes develop during the mixing of ocean and estuarine waters. Plumes were delineated for July 28, October 8, October 27, and December 2, 1972, by analyzing ERTS-1 imagery with the SRI Electronic Satellite Image Analysis Console (ESIAC). Because the chemical and physical composition of the plume and ocean water were not too different, the ESIAC was utilized to expand the scenes and subject the transparencies to varying combinations of viewing techniques to identify and delineate the plumes. Best results were obtained when band 5 transparencies were used. Indications are, when the scene being analyzed is predominantly in the first two steps of the gray scale, it is best to use the negative transparencies. When the analysis is being done above the first two steps of the gray scale, it is best to use the positive transparencies.

Ruggles, F. H., Jr.↗
NASA NTRS1973

Application of ERTS-1 imagery to detecting and mapping modern erosion features, and to monitoring erosional changes, in southern Arizona

The author has identified the following significant results. The red MSS band 5 gives the sharpest definition of modern arroyos. On the best images, modern arroy0s can be distinguished as narrow as 150 to 200 feet in reaches where their contrast with adjacent areas is only moderate, and as narrow as 60 to 75 feet where their contrast is high. Both the red and infrared bands show differences is soils and vegetation. In the late fall and winter imagery, band 7 generally is the most useful for mapping the areas of the more erodible soils. A map at 1:1,000,000 scale has been prepared that shows all the arroyos within the 17,000 square mile study area that have been identified from ERTS-1 images. Also, from U-2 color infrared airphotos, a 1:125,000 scale map has been made of a 50 mile reach along San Simon Wash, in southeastern Arizona. This map shows not only the arroyo channels and narrow flood plains that have developed since 1890, but also areas within a few miles of the wash that are severely guilled, severely sheet-eroded, and moderately sheet-eroded. Two important effects of the third largest recorded flood of the upper Gila River also have been determined from the ERTS-1 images. The inundated area is best displayed on band 7, and the areas of severe sand/gravel erosion/deposition show best on band 5.

Morrison, R. B.↗
NASA NTRS1973

Major crustal fractures in the Baltic Shield

The author has identified the following significant results. Black and white prints and transparencies of images 1039-09315, 1039-09322, and 1040-09371 with all bands of MSS have been used for the analyses. Bands 4 and 5 reveal the major urban areas, agricultural and timbering areas, highways as well as airfields, and an open pit mine. Even the border between Norway and Finland is clearly visible. Lakes, rivers, and wet swamps were best discerned on IR bands 6 and 7. Block fields formed by frost action are best seen on bands 4 and 5. The ancient shoreline on image 1039-09322 is seen as a narrow block field on bands 4 and 5. The effects of the Quaternary ice sheet on the morphography can be seen quite well in the images. The peat bogs are best seen in band 5, but can also be traced in bands 6 and 7. Eskers, glaciofluvial deposits, and deltas are distinguishable in bands 4 and 5, but can be traced in places also in the IR bands. Fluvial deposits are seen in the image 1039-09322 in the valleys of the Tornio and Kemi Rivers. They are easily discerned in bands 4 and 5, evidently because of the cultivated fields and pasture lands. Bands 4, 5, and 6 of image 1039-09315 reveal parts of eskers and glaciofluvial deltas which are affected by eolian activity. It seems evident that ERTS-1 imagery will be a great help in mapping Quaternary features.

Tuominen, H. V.↗
NASA NTRS1973

Dynamics of playa lakes in the Texas High Plains

This study shows that satellite imagery can be used for a census of the thousands of lake basins which commonly exist in semi-arid areas, and which sporadically contain water at various times of the year. Storm paths and runoff collected by such lake basins can also be closely monitored, the accuracy dependent on periodicity of the orbits and the size of the basins. Study of the relationships between spectral differences (obtained from ERTS-1 imagery) and the water balance ecosystem of the lake basins is in a preliminary stage. However, examination of ERTS-1 MSS frames show that Band 4 has the poorest tonal contrast in semi-arid West Texas, Band 5 is best for definition of vegetation, Band 6 is best for defining larger water areas, and Band 7 is best for counting small lake basins with water. Ground-truth studies reveal significant differences between test sites, the relative importance of which will be reflected by the hydrologic balance of each lake basin.

Reeves, C. C., Jr.↗
NASA NTRS1973

The application of Skylab imagery to analysis of fault tectonics and earthquake hazards in the Peninsular Ranges, southern California

The author has identified the following significant results. Frame 114 of the Salton Sea area was studied in all bands to analyze the appearance of important faults. These faults were also studied in the field as well as from aircraft and in aerial photography. The San Andreas/Banning and the Mission Creek faults can be traced across Coachella Valley even though they are buried by alluvium. The faults form ground water barriers and the near surface ground water on the northeast sides of the faults supports patches of vegetation (mesquite and palms) in an otherwise barren desert. These oases are best seen in band 3 (color IR). Otherwise, faults are best seen in band 4 (aerial color). Of the B and W bands, 5 (red) is best for delineating faults. Bands 1 and 2 are excessively grainy and the resolution is considerably inferior to the other bands.

Merifield, P. M.↗
NASA NTRS1974

High-velocity-oxidation performance of metal-chromium-aluminum (MCrAl), cermet, and modified aluminide coatings on IN-100 and type VIA alloys at 1093 C

Cermet, MCrAl, and modified aluminide types of coatings applied to IN-100 and NASA-TRW-VIA alloy specimens were cyclically oxidation tested in a high velocity (Mach 1) gas flame at 1093 C. Several coating compositions of each type were evaluated for oxidation resistance. The modified aluminide coating, Pt-Al, applied to alloy 6A proved to be the best, providing oxidation protection to approximately 750 hours based on weight change measurements. The second best, a CoCrAlY coating applied to 6A, provided protection to 450 hours. The third best was a cermet + aluminide coating on 6A with a protection time to 385 hours.

Deadmore, D. L.↗
NASA NTRS1974

Feasibility for identification of wheat in Hill County, Montana

Hill County, Montana was the site chosen for feasibility studies concerning wheat crop identification using ERTS 1 multispectral band scanner data, in which the specific objective was to determine whether wheat is spectrally separable from other crops which are typically grown in wheat producing areas. Available computerized techniques were evaluated for their utility in the investigation. It was found that wheat can be separated from other crops with a classification accuracy of roughly 90 percent or better, and that the best single data set occurs after wheat is fully headed and before it turns yellow. The best overall performance was obtained using the three-pass data set using the best 8 channels, or all 12 channels.

Flores, L. M.↗
NASA NTRS1973

High modulus high temperature glass fibers

The search for a new high-modulus, high-temperature glass fiber involved the preparation of 500 glass compositions lying in 12 glass fields. These systems consisted primarily of low atomic number oxides and rare-earth oxides. Direct optical measurements of the kinetics of crystallization of the cordierite-rare earth system, for example, showed that the addition of rare-earth oxides decreased the rate of formation of cordierite crystals. Glass samples prepared from these systems proved that the rare-earth oxides made large specific contributions to the Young's modulus of the glasses. The best glasses have moduli greater than 21 million psi, the best glass fibers have moduli greater than 18 million psi, and the best glass fiber-epoxy resin composites have tensile strengths of 298,000 psi, compressive strengths of at least 220,000 psi, flexural strengths of 290,000 psi, and short-beam shear strengths of almost 17,000 psi.

Bacon, J. F.↗
NASA NTRS1974

Geologic information from satellite images

Extracting geologic information from ERTS and Skylab/EREP images is best done by a geologist trained in photo-interpretation. The information is at a regional scale, and three basic types are available: rock and soil, geologic structures, and landforms. Discrimination between alluvium and sedimentary or crystalline bedrock, and between units in thick sedimentary sequences is best, primarily because of topographic expression and vegetation differences. Discrimination between crystalline rock types is poor. Folds and fractures are the best displayed geologic features. They are recognizable by topographic expression, drainage patterns, and rock or vegetation tonal patterns. Landforms are easily discriminated by their familiar shapes and patterns. Several examples demonstrate the applicability of satellite images to tectonic analysis and petroleum and mineral exploration.

Lee, K.↗
NASA NTRS1974

Impact cratering models and their application to lunar studies - A geologist's view

Impact cratering models are discussed which were derived from: (1) laboratory hypervelocity experiments in cohesive materials; (2) laboratory impact experiments in noncohesive materials such as sand; and (3) terrestrial meteorite impact craters (specifically the Ries Crater, the largest well-preserved terrestrial meteorite crater). Salient features of these three categories of models are compared in order to point out unresolved controversies and inconsistencies. Arguments and evidence are presented to support the conclusions that (1) penetrations of secondary impacts are insignificant and are not likely to stir up much local material, (2) the laboratory hypervelocity experiments are perhaps the best model for lunar glass-lined microcraters, (3) laboratory impact experiments in noncohesive materials such as sand are the best model for impacts in lunar regolith, and (4) the Ries is considered the best model for large lunar impact craters. From analogy with the Ries, it appears that lateral and low-angle transport of ejecta and accelerated lateral growth are important in formation of large impact craters.

Chao, E. C. T.↗
NASA NTRS1979

Full-scale engine tests of bulk absorber acoustic inlet treatment

Three different densities of Keviar bulk absorber fan inlet treatment were tested on a YF 102 turbofan engine. This bulk absorber material may have potential for flight application. Farfield noise measurements were made and the attenuation properties of the three treatment densities were compared. In addition, the best bulk treatment was compared to the best single degree of freedom, SDOF (honeycomb and perforated cover sheet) treatment from another investigation. Although the density was varied over a large range, (3 to 1) the effect on attenuation was small. The highest density treatment, 11.8 lb/cubic ft., had a somewhat broader attenuation bandwidth. The comparison of the best bulk and SDOF treatments showed the bulk to have a much greater attenuation bandwidth. At the design frequency both types of treatment had almost equal performance.

Heidelberg, L. J.↗
NASA NTRS1978

Properties of GaN grown on sapphire substrates

Epitaxial growth of GaN on sapphire substrates using an open-tube growth furnace has been carried out to study the effects of substrate orientation and transfer gas upon the properties of the layers. It has been found that for the (0001) substrates, surface appearance was virtually independent of carrier gas and of doping levels. For the (1(-1)02) substrates surface faceting was greatly reduced when He was used as a transfer gas as opposed to H2. Faceting was also reduced when the GaN was doped with Zn, and the best surfaces for the (1(-1)02) substrates were obtained in a Zn-doped run using He as the transfer gas. The best sample in terms of electrical properties for the (1(-1)02) substrate had a mobility greater than 400 sq cm/V per sec and a carrier concentration of about 10 to the 17th per cu cm. This sample was undoped and used He as the transfer gas. The best (0001) sample was also grown undoped with He as the transfer gas and had a mobility of 300 sq cm/V per sec and a carrier concentration of 1 x 10 to the 18th per cu cm.

Crouch, R. K.↗
NASA NTRS1979

Full-scale engine tests of bulk absorber acoustic inlet treatment

Three different densities of Kevlar bulk absorber fan inlet treatment were tested on a YF 102 turbofan engine. This bulk absorber material may have potential for flight application. Far-field noise measurements were made and the attenuation properties of the three treatment densities were compared. In addition the best bulk treatment was compared to the best single degree of freedom, SDOF (honeycomb and perforated cover sheet) treatment from another investigation. Although the density was varied over a large range, (3 to 1) the effect on attenuation was small. The highest density treatment, 11.8 lb/cu ft, had a somewhat broader attenuation bandwidth. The comparison of the best bulk and SDOF treatments showed the bulk to have a greater attenuation bandwidth. At the design frequency both types of treatment had almost equal performance.

Heidelberg, L. J.↗
NASA NTRS1980

An evaluation of satellite data for estimating the area of small forestland in the southern lower peninsula of Michigan

A winter black and white band 5, a winter color, a fall color, and a diazo color composite of the fall scene were used to assess the use and potential of LANDSAT images for mapping and estimating acreage of small scattered forest tracts in Barry County, Michigan. Forests as small as 2.5 acres were mapped from each LANDSAT data source. The maps for each image were compared with an available forest-type map. Mapping errors detected were categorized as boundary and identification errors. The most frequently misclassified areas were agriculture lands, treed-bogs, brushlands and lowland and mixed hardwood stands. Stocking level affected interpretation more than stand size. The overall level of the interpretation performance was expressed through the estimation of classification, interpretation, and mapping accuracies. These accuracies ranged from 74 between 74% and 98%. Considering errors, accuracy, and cost, winter color imagery is the best LANDSAT alternative for mapping small forest tracts. However, since the availability of cloud-free winter images of the study area is significantly lower than images for other seasons, a diazo enhanced image of a fall scene is recommended as the best next best alternative.

Karteris, M. A.↗
NASA NTRS1980

Backward deletion to minimize prediction errors in models from factorial experiments with zero to six center points

Population model coefficients were chosen to simulate a saturated 2 to the 4th fixed-effects experiment having an unfavorable distribution of relative values. Using random number studies, deletion strategies were compared that were based on the F-distribution, on an order statistics distribution of Cochran's, and on a combination of the two. The strategies were compared under the criterion of minimizing the maximum prediction error, wherever it occurred, among the two-level factorial points. The strategies were evaluated for each of the conditions of 0, 1, 2, 3, 4, 5, or 6 center points. Three classes of strategies were identified as being appropriate, depending on the extent of the experimenter's prior knowledge. In almost every case the best strategy was found to be unique according to the number of center points. Among the three classes of strategies, a security regret class of strategy was demonstrated as being widely useful in that over a range of coefficients of variation from 4 to 65%, the maximum predictive error was never increased by more than 12% over what it would have been if the best strategy had been used for the particular coefficient of variation. The relative efficiency of the experiment, when using the security regret strategy, was examined as a function of the number of center points, and was found to be best when the design used one center point.

Holms, A. G.↗
NASA NTRS1981

Development of improved high temperature coatings for IN-792 + HF

The development for t-55 l712 engine of high temperature for integral turbine nozzles with improved thermal fatigue resistance without sacrificing oxidation/corrosion protection is discussed. The program evaluated to coating systems which comprised one baseline plasma spray coating (12% Al-NiCoCrALY), three aluminide coatings including the baseline aluminide (701), two CoNiCrAly (6% Al) + aluminide systems and four NiCoCrY + aluminide coating were evaluated. The two-step coating processes were investigated since it offered the advantage of tailoring the composition as well as properly coating surfaces of an integral or segmented nozzle. Cyclic burner rig thermal fatigue and oxidation/corrosion tests were used to evaluate the candidate coating systems. The plasma sprayed 12% Al-NiCoCrAlY was rated the best coating in thermal fatigue resistance and outperformed all coatings by a factor between 1.4 to 2.5 in cycles to crack initiation. However, this coatings is not applicable to integral or segmented nozzles due to the line of sight limitation of the plasma spray process. The 6% Al-CoNiCrAlY + Mod. 701 aluminide (32 w/o Al) was rated the best coating in oxidation/corrosion resistance and was rated the second best in thermal fatigue resistance.

Profant, D. D.↗
NASA NTRS1982

Into Mesh Lubrication of Spur Gears with Arbitrary Offset Oil Jet. 2: for Jet Velocities Equal to or Greater than Great Velocity

An analysis was conducted for into mesh oil jet lubrication with an arbitrary offset and inclination angle from the pitch point for the case where the oil jet velocity is equal to or greater than gear pitch line velocity. Equations were developed for minimum and maximum oil jet impingement depth. The analysis also included the minimum oil jet velocity required to impinge on the gear or pinion and the optimum oil jet velocity required to obtain the best lubrication condition of maximum impingement depth and gear cooling. It was shown that the optimum oil jet velocity for best lubrication and cooling is when the oil jet velocity equals the gear pitch line velocity. When the oil jet velocity is slightly greater than the pitch line velocity the loaded side of the driven gear and the unloaded side of the pinion receive the best lubrication and cooling with slightly less impingement depth. As the jet velocity becomes much greater than the pitch line velocity the impingement depth is considerably reduced and may completely miss the pinion.

Akin, L. S.↗
NASA NTRS1983

Multiple spacecraft observations of interplanetary shocks ISEE three-dimensional plasma measurements

ISEE 1 and ISEE 3 three-dimensional solar wind plasma measurements are used together with magnetic field measurements across five previously studied interplanetary shocks to test the accuracy of the mixed-mode shock-normal determination technique and to test whether the shock properties are best approximated with a ratio of specific heats of 5/3 or 2. In the shocks examined, the assumption that the velocity jump was along the normal provided an estimate of the shock normal within 15 deg of the best fit normal 50 percent of the time and within 50 deg, 90 percent of the time. The mixed-mode normals lay within 12 deg of the best fit normal 50 percent of the time and within 36 deg, 90 percent of the time. Part of this deviation may be due to differences in the orientation of the local normal from that of the average normal. Finally, the jump in plasma and field across the shock is better predicted from the Rankine-Hugoniot equations using a ratio of specific heats of 5/3 rather than 2.

Russell, C. T.↗