Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Exploring Phosphonium‐Based Anion Exchange Polymers for Moisture Swing Direct Air Capture of Carbon Dioxide

This study explores the performance and stability of ammonium and phosphonium-based polymeric ionic liquids (PILs) with methyl and butyl substituents in moisture-swing direct air capture of CO 2 . The polymers are synthesized with chloride counterions, followed by ion exchange to the bicarbonate ion, and tests for CO 2 capture capacity and stability under cyclic wet–dry conditions. The phosphonium polymer with methyl substituents [PVBT-MeP] demonstrates the highest CO 2 capture capacity at ≈510 µmol g⁻¹, attributed to minimal steric hindrance and stronger ion pairing with bicarbonate. However, oxidative degradation is detected by 31 P NMR spectroscopy after the moisture swing experiment, with the appearance of a phosphine oxide peak at 61.28 ppm, which indicates phosphorus oxidation as the primary degradation pathway. In contrast, the ammonium polymer with butyl substituents [PVBT-BuN] exhibits the highest stability, showing no degradation over five moisture swing cycles. Additional stability experiments in 0.5 m KHCO 3 solutions reveal no degradation for any PIL, suggesting that oxidative degradation is driven by dynamic acid-base reactions during the moisture swing cycles in the air. Furthermore, these findings reveal the potential of phosphonium-based PILs for moisture-swing direct air capture, achieving high capacity while highlighting the need for optimized stability through counterion and structural design.

36 MATERIALS SCIENCE↗

Comparative techno-economic analysis of synthetic renewable natural gas production via reactive CO 2 capture and conversion

Reactive CO 2 capture and conversion (RCC) is an emerging carbon management strategy that integrates CO 2 capture and conversion and avoids intermediate CO 2 purification. In this study, we design an RCC process to capture atmospheric CO 2 and react it with renewable hydrogen to produce synthetic renewable natural gas (SRNG), which serves as a carbon-neutral energy source and a chemical form of long-duration renewable energy storage. We assess the technological potential of RCC through process modeling, techno-economic, carbon footprint, and sensitivity analyses. Our findings demonstrate that RCC offers energy savings and comparable cost to separated capture and conversion processes. The cost is dominated by renewable hydrogen and material replacement cost. SRNG produced via RCC is competitive with existing low-carbon natural gas technologies and presents a promising low-cost option for long-duration energy storage. This work highlights the potential for deploying RCC technologies within a circular carbon economy and the scientific and technical challenges that must be overcome for material and technology developers.

03 NATURAL GAS↗

A comparative assessment of the economic viability of nuclear-integrated direct air capture systems

Direct air capture (DAC) systems require heat and electricity to operate, which can be supplied by nuclear power plants (NPPs). In this study, the performance and cost of various conceptual nuclear-DAC systems are assessed, and their performance is compared with several non-nuclear options. Three nuclear-DAC systems are considered: (1) a liquid solvent direct air capture (L-DAC) system with heat supplied from natural gas (NG) and electricity supplied by an NPP, (2) an electrified L-DAC system, fully powered by electricity from an NPP, and (3) a solid sorbent direct air capture (S-DAC) system utilizing both heat and electricity generated by an NPP. Two nuclear technologies are considered: a pressurized water reactor and a high-temperature gas-cooled reactor. Under the medium conservatism scenario, the levelized cost of direct air capture (LCOD) for these systems range from $\$$310/tCO 2 to $\$$525/tCO 2 with the L-DAC system having an NG heat supply at the lower end of the range, and the electrified L-DAC system and the S-DAC system at the higher end of the range. Coupling with nuclear energy led to a 21 % reduction in LCOD for the L-DAC system with NG heat supply and a 29 % reduction for the S-DAC system when compared to fully NG-powered options. When powering the DAC system with grid electricity, the LCOD is highly dependent on the assumed electricity price and carbon intensity. The nuclear option is the cheaper choice when the price of low-carbon grid electricity exceeds $\$$95/MWh and $\$$45/MWh for the L-DAC and S-DAC systems, respectively.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Insights into the Enhanced Oxidative Thermal Stability of Nanoparticle Organic Hybrid Materials Developed for Carbon Capture and Energy Storage

Due to the growing need for Direct Air Capture (DAC) and integrated carbon capture and conversion technologies, CO 2 capture materials that can withstand a wide range of environmental conditions, including fluctuating ambient temperatures and high concentrations of oxidizing agents (i.e., oxygen and moisture), are critically needed. Liquid-like Nanoparticle Organic Hybrid Materials (NOHMs) have been proposed as candidates for DAC and electrolyte additives enabling sustainable energy storage (i.e., integrated CO 2 capture and conversion and flow batteries). Liquid-like NOHMs functionalized with an ionic bond have been shown to display greatly enhanced oxidative thermal stability compared to the untethered polymer. However, these studies were limited in terms of reaction conditions and the detailed mechanisms of the oxidative thermal degradation were not reported. In this work, a kinetic thermal degradation analysis was performed on NOHM-I-HPE and the neat polymer, Jeffamine M2070 (HPE), in both non-oxidative and oxidative conditions. NOHM-I-HPE displayed similar thermal stability to the untethered polymer in a nitrogen environment, but interestingly, the thermal stability of the ionically tethered polymer was significantly enhanced in the presence of air. This observed enhancement of oxidative thermal stability is attributed to the orders of magnitude larger viscosity of the liquid-like NOHMs compared to untethered polymer and the bond stabilization of the ionically tethered polymer in the NOHMs canopy. Further, spectroscopic analyses of the liquid residue revealed that in the presence of oxygen, the degradation of HPE and NOHM-I-HPE occurs through the formation of trace amounts of carbonyls. This study illustrated that NOHMs can serve as functional materials for sustainable energy storage applications because of their excellent oxidative thermal stability.

25 ENERGY STORAGE↗

Big Data Analysis and Technical Review of Regeneration for Carbon Capture Processes

Carbon capture remains an integral technology to mitigate pollution from one of the most prevalent greenhouse gases. CO 2 desorption/absorbent regeneration for both solid- and liquid-based systems is widely recognized as an energy-intensive and costly process operation. Consequently, tremendous work was devoted towards developing new absorbents and regeneration processes to promote their economic feasibility for extensive implementation. In this review, we broadly and deeply review more than 10,000 papers and extract the hidden trends of carbon capture and absorbents regeneration in the past few decades, using a novel data-mining analysis technique. We comprehensively analyzed an array of recent absorbent regeneration methods utilized in post-combustion, pre-combustion, carbon capture from industrial point sources, and direct air carbon capture, with an emphasis on sorbent and solvent-based techniques. In conclusion, advanced regeneration methods in these techniques were illustrated and discussed, followed by recommendations for further research efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Net Present Value Optimization of a Natural Gas Combined Cycle Plant with CO 2 Capture using a Water-Lean Solvent Considering Transient Electricity Price for Multiple Regions

Global CO 2 emissions are increasing at about a 1.5% rate per year. Fossil fuel-based plants are one of the main contributors to this rise. In the power generation industry, fossil fuel plants are dominant, and many plants are under development. In this study, a natural gas combined cycle (NGCC) power plant with postcombustion capture using a leading water-lean solvent is considered. For optimal design and operating schedule, large-scale dynamic optimization is undertaken for net present value (NPV) optimization. The first principle dynamic model of NGCC is developed, including a model of the highly efficient H-class gas turbines. For computational tractability of the dynamic optimization problem, a reduced-order model is developed by using the Hankel singular value decomposition. A waterlean solvent, N-(2-ethoxyethyl)-3-morpholinopropan-1-amine, is used for carbon capture. A model of the capture system is developed in Aspen Plus, which is used to develop a reduced-order model by using ALAMO, a machine learning software. In addition, a reduced model of the CO 2 compression system with a dehydration unit is also considered. The integrated system is used for NPV optimization by using the Python-based PYOMO platform. The PCC process is analyzed for three configurations-conventional packed bed, rotating packed bed (RPB), and a combination of RPB and direct contact cooler. The NPV optimization is performed for 14 regional markets by considering year-long clustered and continuous locational marginal price data with a 1 h interval. Optimization results show that the PCC can achieve 90% CO 2 capture with a positive NPV for six regions. Sensitivity studies conducted by using the PCC configurations indicate that the process is economically feasible for 9 regions out of 14 regional electricity markets with NPV values in the range of 33−540 $MM.

cabon capture↗

Improving Conversion of Captured CO 2 on Mixed-Oxide Dual-Function Materials by Low-Concentration Metal Promotion

Reactive carbon capture (RCC) is a promising nascent approach to harness the untapped resource of waste CO 2 to produce fuels and platform chemicals. However, process economics relies on the design of dual-function materials (DFMs) that exhibit maximal conversion of captured CO 2 and high selectivity toward valuable carbon products (e.g., CO). Herein, we report the use of low-concentration (ca. 0.5 wt %) metal promotors (Pt and Au) to improve the conversion of captured CO 2 on a Zn-Al mixed-oxide DFM by >30%, while also more than doubling per-cycle CO yield due to enhanced retention of captured CO 2 and H 2 activation. In situ DRIFTS of bound CO 2 on the DFMs showed distinctions in surface carbonate formation for the Pt- and Au-modified materials that were correlated with product evolution during the reactive desorption step of RCC. Particularly, Pt afforded superior H 2 activation but formed irreversibly-bound bicarbonates, compromising overall productivity, while the Na/Au/ZA DFM predominantly adsorbed CO 2 on Na sites, resulting in polydentate carbonates that are retained until higher temperatures before conversion to CO. In conclusion, these results indicate that adding a low concentration of oxidation-resistant noble metals, especially Au, is an effective strategy for improving key performance metrics of Zn-Al mixed-oxide DFMs to further advance the development of scalable RCC technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive Capture and Conversion of Carbon Dioxide to Methanol with ZnZrO 2 and Alkali-Promoted Mg 3 AlO x Mixed Oxide Catalytic Sorbents

Reactive capture and conversion (RCC) explores the use of a single-unit process to capture CO 2 and produce a product, in this case, methanol (MeOH). In this study, different configurations of a catalytic sorbent (CS) composed of ZnZrO 2 catalyst and Mg 3 AlO x sorbent with and without alkali modification are evaluated for CO 2 adsorption, steady-state catalysis with cofed CO 2 and H 2 , and transient RCC performance. A catalyst composed of a physical mixture of Mg 3 AlO x with ZnZrO 2 resulted in a slight increase in CO 2 uptake, with a low impact on the catalytic activity and RCC of the materials compared to ZnZrO 2 alone. In contrast, Na impregnation significantly increased the level of CO 2 uptake from 0.28 mmol/g (ZnZrO 2 alone) to 0.6 and 1.1 mmol/g for the CS with Na on the catalyst or Mg 3 AlO x , respectively. However, Na impregnation reduced the CO 2 conversion rate and MeOH selectivity during steady-state cofeed experiments at 300 °C and 6 bar. In contrast to steady-state catalysis conditions, RCC, which is a cyclic capture and conversion process, creates dynamic CO 2 and H 2 surface coverages, favoring CH 4 in the early stages of the conversion step and then CO and MeOH as the catalyst CO 2 coverage reduces. The highest MeOH productivity during RCC was achieved with CS that balanced the CO 2 uptake with only moderate catalyst rate reductions caused by Na addition. The optimal material, ZnZrO 2 +10%Na/Mg 3 AlO x , achieved a CO 2 uptake of 0.8 mmol/g and a MeOH productivity of 0.5 mmol/g with 100% selectivity at 260 °C and 6 bar during RCC. This marks the highest RCC MeOH productivity reported to date, although the process needs further optimization and even with optimization, may remain impractical. The results further demonstrate that optimization of catalytic sorbents under steady-state flow conditions does not easily correlate to transient capture and conversion cycles for methanol synthesis from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct CO 2 Capture from Air using Poly(ethylenimine)-Loaded Polymer/Silica Fiber Sorbents

Direct CO2 capture from atmospheric air is gaining increased attention as one of the most scalable negative carbon approaches available to tackle climate change if coupled with the sequestration of CO2 geologically. Furthermore, it can also provide CO2 for further utilization from a globally uniform source, which is especially advantageous for economies without natural sources of carbon-based feedstocks. Solid-supported amine-based materials are effective for direct air capture (DAC) due to their high CO2 uptakes and acceptable sorption kinetics at ambient temperature. In this work, we describe the application of polymer/silica fiber sorbents functionalized with a primary amine-rich polymer, poly(ethylenimine) (PEI), for DAC. Monolithic fiber sorbents composed of cellulose acetate and SiO2 are synthesized via the dry-jet, wet quench spinning technique. These fibers are then functionalized with PEI (Mw 800 Da) in a simple and scalable postspinning infusion step and tested for CO2 capture under pseudoequilibrium conditions as well as under breakthrough conditions. An investigation to study the effect of feed flow rate, adsorption temperature, and presence of moisture in the feed on the CO2 breakthrough performance of a densely packed fiber sorbent module is conducted to highlight the potential application of this class of structured contactors in direct air capture. The pressure drop of these contactors at high gas velocities is also evaluated. Finally, a vacuum-assisted desorption step is demonstrated for production of high-purity CO2 from both dry and humid ambient air mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of multiple calcination cycles on CO 2 capture efficiency during carbonation of MgO in a mineral looping process

Magnesium oxide (MgO) is considered as a potential sorbent for direct air capture of carbon dioxide in a looping process. Previous research on mineral looping for carbon capture from flue gas using MgO has shown deactivation of the sorbent with repeated cycles but repeated cycling for carbonation at ambient conditions has not been yet investigated. Here, we tested three cycles of carbonation for MgO nano-scale powders with different starting surface area. We find that carbonation efficiency is higher at higher surface area. No decrease in carbonation efficiency was observed with cycling, instead we find that carbonation efficiency and surface area are stable or even increasing with cycling. Based on our experimental data, we hypothesize that the carbonation in presence of relative humidity leads to first hydration of MgO, leading to formation of brucite (Mg(OH) 2 ). This formation of Mg(OH) 2 is a volume-increasing reaction, which leads to fracturing of MgO particles and results in an increase in surface area. We observed formation of amorphous and crystalline hydrated carbonates. The crystalline phase observed was nesquehonite (MgCO 3 ⋅ 3H 2 O). Our results show that MgO does not show any deactivation with repeated cycling for carbon capture at ambient conditions and in the presence of humidity. These findings therefore indicate that MgO is a suitable candidate as sorbent material for direct air capture of carbon dioxide.

Ambient weathering↗

Electron Capture Reactions and Beta Decays in Steller Environments

Electron capture reactions on Ni and Co isotopes are investigated by shell model calculations in steller environments. The capture rates depend sensitively on the distribution of the Gamow-Teller (GT) strength. The capture rates obtained by using GXPF1J Hamiltonian for fp-shell are found to be consistent with the rates obtained from experimental GT strength in {sup 58}Ni and {sup 60}Ni. Capture rates in Co isotopes, where there were large discrepancies among previous calculations, are also investigated. Beta decays of the N = 126 isotones are studied by shell model calculations taking into account both the GT and first-forbidden (FF) transitions. The FF transitions are found to be important to reduce the half-lives by twice to several times of those by the GT contributions only. Implications of the short half-lives of the waiting point nuclei on the r-process nucleosynthesis are discussed for various astrophysical conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Target effects on the linear polarization of photons emitted in radiative electron capture by heavy ions

Radiative electron capture by highly-charged, heavy ions is re-investigated within the framework of the first-order perturbation theory and impulse approximation. In this study, we focus especially on the polarization properties of the emitted radiation and on the effects which arise from the binding of the target electrons. In order to explore such effects, detailed calculations have been carried out for relativistic collisions of bare uranium U{sup 92+} projectiles with neutral low- and medium-Z atoms. From these calculations, it is shown that the linear polarization of K-REC (L-REC) photons [photons originating from radiative electron capture into the K shell (L shell)] can be very sensitive to the momentum distribution of bound electrons if the capture occurs selective for the different shells of the target. The most pronounced effect can be observed for collision studies as performed with well-defined impact parameters or upon suppression of the capture from the outer target shells.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-temperature carbon dioxide capture in a porous material with terminal zinc hydride sites

Carbon capture can mitigate point-source carbon dioxide (CO 2 ) emissions, but hurdles remain that impede the widespread adoption of amine-based technologies. Capturing CO 2 at temperatures closer to those of many industrial exhaust streams (>200°C) is of interest, although metal oxide absorbents that operate at these temperatures typically exhibit sluggish CO 2 absorption kinetics and instability to cycling. Here, in this study, we report a porous metal–organic framework featuring terminal zinc hydride sites that reversibly bind CO 2 at temperatures above 200°C—conditions that are unprecedented for intrinsically porous materials. Gas adsorption, structural, spectroscopic, and computational analyses elucidate the rapid, reversible nature of this transformation. Extended cycling and breakthrough analyses reveal that the material is capable of deep carbon capture at low CO 2 concentrations and high temperatures relevant to postcombustion capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of the cascade capture of electrons by charged donors in GaAs and InP

The times for the cascade capture of an electron by a charged impurity have been calculated for pulsed and stationary excitations of impurity photoconductivity in GaAs and InP. The characteristic capture times under pulsed and continuous excitations are shown to differ noticeably both from each other and from the value given by the Abakumov–Perel–Yassievich formula for a charged impurity concentration greater than 10{sup 10} cm{sup –3}. The cause of this difference has been established. The Abakumov–Perel–Yassievich formula for the cascade capture cross section in the case of stationary excitation has been generalized. The dependences of the cascade capture rate on the charged impurity concentration in GaAs and InP have been found for three temperatures in the case of pulsed excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon Capture (Annual Report)

The following report describes the research conducted under the U.S. Department of Energy (DOE), National Energy Technology Laboratory (NETL), Regional University Alliance (RUA) Carbon Capture Field Work Proposal (FWP) in FY13. The goal of the Carbon Capture FWP is to support the program by developing technologies which decrease the cost of carbon dioxide (CO 2 ) capture from coal-based power generation below $40/tonne. This goal is accomplished by examining a portfolio of transformative technologies to determine which might be applicable to CO 2 capture and advancing the most promising technologies through successive levels of development, including ideal performance testing, realistic performance testing, and field testing in the presence of actual flue or fuel gas with the final objective of technology transfer and commercialization. Fourteen potentially transformative technologies were evaluated in FY13, and five were selected for continued development in FY14. Nine more advanced technologies were developed toward commercialization. Of these, five made significant progress and will be further developed in FY14, and research on four has been discontinued.

20 FOSSIL-FUELED POWER PLANTS↗

Experimental and Theoretical Understanding of Neutron Capture on Uranium Isotopes

Neutron capture cross sections on uranium isotopes are important quantities needed to model nuclear explosion performance, nuclear reactor design, nuclear test diagnostics, and nuclear forensics. It has been difficult to calculate capture accurately, and factors of 2 or more be- tween calculation and measurements are not uncommon, although normalization to measurements of the average capture width and nuclear level density can improve the result. The calculations of capture for 233,235,237,239 U are further complicated by the need to accurately include the fission channel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Commercial-Scale Front-End Engineering Design (Feed) Study for MTR’s Membrane CO 2 Capture Process

This is the final report for a DOE sponsored project (DE-FE00031846) where MTR, Sargent & Lundy (S&L), Trimeric Corporation (Trimeric), in cooperation with Basin Electric Power Cooperative (BEPC), and Electric Power Research Institute (EPRI), completed a full-scale Front End Engineering and Design (FEED) study to evaluate the retrofit of MTR’s membrane-based post-combustion carbon dioxide (CO2) capture technology to the BEPC Dry Fork Station (DFS) Unit 1. The capture plant is designed to treat the entire flue gas flow from DFS; it is estimated that this system will capture 6,560 tonnes per day (TPD) of carbon dioxide. The overall goal of the project was to develop an AACE Level 2 Capital Cost Estimate with an accuracy of ±15% to demonstrate the economic feasibility of constructing and operating the MTR CO2 capture plant.

01 COAL, LIGNITE, AND PEAT↗

Industrial CO2 Removal: CO2 Capture from Ambient Air and Geological Sequestration

This abstract and its accompanying presentation will provide an overview of two distinct industrial processes for removing carbon dioxide (CO2) from the atmosphere as a means of addressing anthropogenic climate change. The first of these is carbon dioxide capture and storage (CCS) coupled with large scale biomass production (hereafter referred to as bioCCS). The second is CO2 capture from ambient air via industrial systems (hereafter referred to as direct air capture (DAC)). In both systems, the captured CO2 would be injected into deep geologic formations so as to isolate it from the atmosphere. The technical literature is clear that both of these technologies are technically feasible as of today (IPCC, 2005; Keith, 2009; Lackner, 2009; Luckow et al., 2010; Ranjan and Herzog, 2011). What is uncertain is the relative cost of these industrial ambient-air CO2 removal systems when compared to other emissions mitigation measures, the ultimate timing and scale of their deployment, and the resolution of potential site specific constraints that would impact their ultimate commercial deployment.

09 BIOMASS FUELS↗