SEARCH · Search NASA

Results for “Compilers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Environmental protection requirements for scout/shuttle auxiliary stages

The requirements for enabling the Scout upper stages to endure the expected temperature, mechanical shock, acoustical and mechanical vibration environments during a specified shuttle mission were determined. The study consisted of: determining a shuttle mission trajectory for a 545 kilogram (1200 pound) Scout payload; compilation of shuttle environmental conditions; determining of Scout upper stages environments in shuttle missions; compilation of Scout upper stages environmental qualification criteria and comparison to shuttle mission expected environments; and recommendations for enabling Scout upper stages to endure the exptected shuttle mission environments.

Qualls, G. L.↗

NASA NTRS1980

Analysis of the charging of the SCATHA (P78-2) satellite

The charging of a large object in polar Earth orbit was investigated in order to obtain a preliminary indication of the response of the shuttle orbiter to such an environment. Two NASCAP (NASA Charging Analyzer Program) models of SCATHA (Satellite Charging at High Altitudes) were used in simulations of charging events. The properties of the satellite's constituent materials were compiled and representations of the experimentally observed plasma spectra were constructed. Actual charging events, as well as those using test environments, were simulated. Numerical models for the simulation of particle emitters and detectors were used to analyze the operation of these devices onboard SCATHA. The effect of highly charged surface regions on the charging conductivity within a photosheath was used to interpret results from the onboard electric field experiment. Shadowing calculations were carried out for the satellite and a table of effective illuminated areas was compiled.

Stannard, P. R.↗

NASA NTRS1982

An automated mapping satellite system

Topographic maps are compiled by manually operated stereoplotters that recreate the geometry of two wide-angle overlapping stereo frame photographs. Continuous imaging systems such as strip cameras, electro-optical scanners, or linear arrays of detectors (push brooms) can also create stereo coverage from which topography can be compiled; however, the instability of an aircraft in the atmosphere makes this approach impractical. The benign environment of space permits a satellite to orbit the Earth with very high stability as long as no local perturbing forces are involved. Solid-state linear-array sensors have no moving parts and create no perturbing force on the satellite. Digital data from highly stabilized stereo linear arrays are amenable to simplified processing to produce both planimetric imagery and elevation data. A proposed satellite, called MAPSAT, could accomplish automated mapping in near real time. Image maps as large as 1:50,000 scale with contours as close as 20-m interval may be produced from MAPSAT data.

Colvocoreses, A. P.↗

NASA NTRS1982

Photogrammetry of the Viking Lander imagery

The problem of photogrammetric mapping which uses Viking Lander photography as its basis is solved in two ways: (1) by converting the azimuth and elevation scanning imagery to the equivalent of a frame picture, using computerized rectification; and (2) by interfacing a high-speed, general-purpose computer to the analytical plotter employed, so that all correction computations can be performed in real time during the model-orientation and map-compilation process. Both the efficiency of the Viking Lander cameras and the validity of the rectification method have been established by a series of pre-mission tests which compared the accuracy of terrestrial maps compiled by this method with maps made from aerial photographs. In addition, 1:10-scale topographic maps of Viking Lander sites 1 and 2 having a contour interval of 1.0 cm have been made to test the rectification method.

Wu, S. S. C.↗

NASA NTRS1982

The language parallel Pascal and other aspects of the massively parallel processor

A high level language for the Massively Parallel Processor (MPP) was designed. This language, called Parallel Pascal, is described in detail. A description of the language design, a description of the intermediate language, Parallel P-Code, and details for the MPP implementation are included. Formal descriptions of Parallel Pascal and Parallel P-Code are given. A compiler was developed which converts programs in Parallel Pascal into the intermediate Parallel P-Code language. The code generator to complete the compiler for the MPP is being developed independently. A Parallel Pascal to Pascal translator was also developed. The architecture design for a VLSI version of the MPP was completed with a description of fault tolerant interconnection networks. The memory arrangement aspects of the MPP are discussed and a survey of other high level languages is given.

Reeves, A. P.↗

NASA NTRS1983

Materials processing in space bibliography, 1983, revised

Flight experiments utilizing a low gravity environment to elucidate and control various processes, or ground based activities that provide supporting research are compiled. Six major categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; glasses and ceramics; ultrahigh vacuum and containerless processing technologies; and combustion are included. A list of patents and appendices providing a compilation of anonymously authored collections and reports and a cross reference index are included.

Pentecost, E.↗

NASA NTRS1978

The LHEA PDP 11/70 graphics processing facility users guide

A compilation of all necessary and useful information needed to allow the inexperienced user to program on the PDP 11/70. Information regarding the use of editing and file manipulation utilities as well as operational procedures are included. The inexperienced user is taken through the process of creating, editing, compiling, task building and debugging his/her FORTRAN program. Also, documentation on additional software is included.

Source record↗

NASA NTRS1983

Constraints on rift thermal processes from heat flow and uplift

The implications of heat flow data available from five major Cenozoic continental rift systems for the processes of continental rifting are discussed, and simple thermal models of lithospheric thinning which predict uplift are used to further constrain the thermal processes in the lithosphere during rifting. Compilations of the heat flow data are summarized and the salient results of these compilations are briefly discussed. The uplift predictions of the slow and rapid thinning models, in which thinning is assumed to occur at a respectively slower and faster rate than heat can be conducted into the lithosphere, are presented. Comparison of uplift rates with model results indicates that the lithosphere is in a state between the two models. While uplift is predicted to continue after thinning has ceased due to thermal relaxation of the lithosphere, the rapid thinning model is always predicted to apply to surface heat flow, and an anomaly in this flow is not predicted to develop until after thinning has stopped.

Morgan, P.↗

NASA NTRS1983

Digital Instrumentation Analysis and Navigation System (DIANS) for system identification

Hardware, software, and performance features of the Digital Instrumentation and Navigation System (DIANS) designed for NASA research to collect flight data as a strap-down system are detailed. The support software for the system has a cross compiler, a linkage editor, and cross assembler, extended communication capabilities, postflight processing applications, and compilers for PASCAL, FORTRAN, CBASIC and MT. The DIANS microcomputer has a 1 Mbyte RAM module, a fast floating point processor board, a 68000 monoboard computer with 64 RAM, a 128 Kbyte bubble memory card, and a navigation radio. The system also carries a battery for full system operation for over an hour. The support software is also stored on a host mainframe computer, which has a CP/M operating system. Pitch, roll, and heading data are gathered from the on-board system, and communication is possible between the airborne and ground-based computer.

Smyth, R. K.↗

NASA NTRS1983

A catalogue of photometric sequences (suppl. 3)

In stellar photometry studies, certain difficulties have arisen because of the lack of suitable photometric sequences for calibrating astronomical photographs. In order to eliminate these difficulties, active observers were contacted with a view to drawing up lists of suitable sequences. Replies from 63 authors offering data on 412 sequences were received. Most data were in the UBV system and had been obtained between 1968 and 1973. These were included in the original catalogue. The Catalogue represents a continuation of the earlier Photometric Catalogue compiled by Sharov and Jakimova (1970). A small supplement containing 69 sequences was issued in 1973. Supplement 2 was produced in 1976 and contained 320 sequences. Supplement 3 has now been compiled. It contains 1271 sequences.

Argue, A. N.↗

NASA NTRS1983

A new method for generating and maintaining rigid formats in NASTRAN

A new method for generating and updating Rigid Formats in NASTRAN is discussed. The heart of this method is a Rigid Format data base that is in card-image format and that can therefore be easily maintained by the use of standard text editors. Each Rigid Format entry in this data base will contain the Direct Matrix Abstraction Program (DMAP) for that Rigid Format along with the related restart, subset and substructure control tables. NASTRAN will read this data base directly in every NASTRAN run and perform the necessary transformations to allow the DMAP to be processed and compiled by the NASTRAN executive. This approach will permit Rigid Formats to be changed without unnecessary compilations and relinking of NASTRAN. Furthermore, this approach will also make it very easy for users to make permanent changes to existing Rigid Formats as well as to generate their own Rigid Formats. This new method will be incorporated in a future release of the public version of NASTRAN.

Pamidi, P. R.↗

NASA NTRS1983

Seismic properties of the crust and uppermost mantle of North America

Seismic refraction profiles for the North American continent were compiled. The crustal models compiled data on the upper mantle seismic velocity (P sub n), the crustal thickness (H sub c) and the average seismic velocity of the crystalline crust (V sub p). Compressional wave parameters were compared with shear wave data derived from surface wave dispersion models and indicate an average value for Poisson's ratio of 0.252 for the crust and of 0.273 for the uppermost mantle. Contour maps illustrate lateral variations in crustal thickness, upper mantle velocity and average seismic velocity of the crystalline crust. The distribution of seismic parameters are compared with a smoothed free air anomaly map of North America and indicate that a complidated mechanism of isostatic compensation exists for the North American continent. Several features on the seismic contour maps also correlate with regional magnetic anomalies.

Braile, L. W.↗

NASA NTRS1984

Space Station Technology, 1983

This publication is a compilation of the panel summaries presented in the following areas: systems/operations technology; crew and life support; EVA; crew and life support: ECLSS; attitude, control, and stabilization; human capabilities; auxillary propulsion; fluid management; communications; structures and mechanisms; data management; power; and thermal control. The objective of the workshop was to aid the Space Station Technology Steering Committee in defining and implementing a technology development program to support the establishment of a permanent human presence in space. This compilation will provide the participants and their organizations with the information presented at this workshop in a referenceable format. This information will establish a stepping stone for users of space station technology to develop new technology and plan future tasks.

Wright, R. L.↗

NASA NTRS1984

Global Resources Information System

The basic design criteria and operating characteristics of a Global Resources Information System GRIS are defined. Researchers are compiling background material and aiding JPL personnel in this project definition phase of GRIS. A bibliography of past studies and current work on large scale information systems is compiled. The material in this bibliography will be continuously updated throughout the lifetime of this grant. Project management, systems architecture, and user applications are also discussed.

Estes, J. E.↗

NASA NTRS1984

Microgravity science and applications bibliography, 1984 revision

A compilation of Government reports, contractor reports, conference proceedings, and journal articles dealing is presented that deal with flight experiments utilizing a low gravity environment to elucidate and control various processes or with ground based activities that provide supporting research. Subdivisions include six major categories: (1) Electronic Materials; (2) Metals, Alloys, and Composites; (3) Fluid Dynamics and Transports; (4) Biotechnology; (5) Glasses and Ceramics; and (6) Combustion. Also included are publications from the European, Soviet, and Japanese MSA programs. In addition, there is a list of patents and appendices providing a compilation of anonymously authored reports and a cross reference index.

Pentecost, E.↗

NASA NTRS1985

The Galilean Satellite Geological Mapping Program, 1984

About 40 investigators from various universities, research institutes, and government offices in the United States, England, Germany, and Italy are compiling maps of the Galilean satellites. All maps are at a scale of 1:5 million except for three of the Io maps, where high resolution pictures permit compilation of selected areas at larger scales. Guidelines for mapping Ganymede are discussed.

Lucchitta, B. K.↗

NASA NTRS1985

Mars Planimetric Mapping

The 1:5,000,000 scale shaded relief maps of Mars originally compiled from Mariner 9 pictures are being upgraded by adding details visible on Viking Orbiter images. This work is done by modifying the original airbrush drawings; no attempt is made to reposition features according to the latest control nets. Thirteen of these maps have been published to date, two are in compilation, and two are in press. A hard cover atlas containing reduced scale versions of all Mars cartographic products will be published upon completion of the revisions of the 1:5,000,000 scale maps, the 1:2,000,000 scale photomosaics, and Mars color albedo mapping tasks. This atlas will supersede the existing Atlas of Mars prepared by Batson and others.

Batson, R. M.↗

NASA NTRS1984

The IHW reference star catalogs for Comets Halley and Giocobini-Zinner

The general categories of catalogs are observed and compiled. Observed catalogs are tabulations of positions determined with a single instrument (transit circle or astrograph) at a single location with a single approximate mean epoch. Compiled catalogs are produced from a combination of observed catalogs and have the advantage of many more observations per star. In addition, catalogs may be classified according to their density and type of instrument used to produce them. The specific catalogs that should be used for Halley's Comet and Giaobini-Zinner Comet are described.

Harrington, R. S.↗