Search NASA⌕ Search

SEARCH · Search NASA

Results for “Continuum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Analysis of Open Hole Compression Specimens Using the CompDam Continuum Damage Mechanics Model

This report documents a validation study on the standard Open Hole Compression (OHC) laminate test specimen conducted as part of the NASA Advanced Composites Project (ACP). Tests were conducted on OHC specimens with hard, quasi-isotropic, and soft layups using digital image correlation and X-Ray computed tomography to capture the structural response and damage evolution. Progressive damage models were constructed for use with the CompDam continuum damage mechanics code following the best practices established during the ACP. Detailed interrogation of the analysis results and comparison with experimental measurements provide a basis for assessing the capability of the modeling approach for OHC. The structural response is found to be captured well, with strengths predicted within 3\% of the experimental values for hard and quasi-isotropic laminates. In the soft laminate, the model predicts failure to be more brittle than the nonlinear, ductile response that was measured. Damage states extracted from the models at the same load level as test measurements are overlaid to show directly the similarities and differences between test and analysis results. Studying the damage evolution predicted by the analysis reveals that the failure process is a competition between fiber damage and delamination/sub-laminate buckling, with fiber damage dominating the collapse in the hard laminate and sub-laminate buckling governing in the soft laminate. Finally, a series of parametric studies varying numerical solution parameters (mesh size, mass scaling) and physical properties (fiber direction compressive strength and toughness) reveal sensitivities and deficiencies of the model. To the authors' knowledge, this study is the first for OHC specimens to include detailed evaluation of damage mode interactions, direct overlay of predicted and measured damage states, and sensitivity of the predicted results to difficult-to-measure fiber direction material properties.

Continuum damage mechanics↗

The Transformation and Export of Organic Carbon Across an Arctic River-Delta-Ocean Continuum

The Arctic Ocean is surrounded by land that feeds highly seasonal rivers with water enriched in high concentrations of dissolved and particulate organic carbon (DOC and POC). Explicit estimates of the flux of organic carbon across the land-ocean interface are difficult to quantify and many interdependent processes makes source attribution difficult. A high-resolution 3-D biogeochemical model was built for the lower Yukon River and coastal ocean to estimate biogeochemical cycling across the land-ocean continuum. The model solves for complex reactions related to organic carbon transformation, including mechanistic photodegradation and multi-reactivity microbial processing, DOC to POC flocculation, and phytoplankton dynamics. The baseline DOC and POC flux out of the delta from April to September 2019, was 977 and 536 Gg C (~80% of the annual total), but only 50% of the DOC and 25% of the POC exited the plume across the 10 m isobath. Microbial breakdown of DOC accounted for a net loss of 168 Gg C (17% of delta export) within the plume and photodegradation accounted for a net loss of 46.6 Gg C DOC (5% of delta export) in 2019. Flocculation decreased the total organic carbon flux by only 6.4 Gg C (~1%), while POC sinking accounted for 63.3 Gg C (10%) settling in the plume. The loss of chromophoric dissolved organic matter (CDOM) due to photodegradation increased the light available for phytoplankton growth throughout the coastal ocean, demonstrating the secondary effects that organic carbon reactions can have on biological processes and the net coastal carbon flux.

Land-Ocean Continuum↗

Statistical Study of the Non-Thermal Continuum Radiation Beaming Angle Measured By the High Frequency Receiver on Van Allen Probes-A

The nonthermal continuum (NTC) radiation beaming angle is computed over the entire Van Allen Probes-A mission when the spacecraft was in the dawn sector. The conditions in the dawn sector are favorable for the wave vector to lie near/in the spacecraft's spin plane allowing a favorable estimate of the beaming angle, and the dawn sector is also advantageous in that previous studies show NTC occurrence to peak in this sector. We found that scatter plots, over the entire mission, of beaming angle versus magnetic latitude form a distinct inverted-V pattern, with the apex at/near the magnetic equator. This pattern was sharpest for frequencies (f) ≲ 100 kHz. Using the NTC beaming formula from the linear mode conversion theory (LMCT), we show that such an inverted-V pattern is expected due to the large variation in the plasmapause location over the entire mission. The theoretical derived pattern qualitatively reproduces the observed pattern but not quantitatively. The lack of quantitative agreement is discussed and is attributed to several factors, one factor is off-centered emissions from the radio window. The qualitative agreement strongly supports LMCT as being the dominant mechanism generating NTC for f ≲ 100 kHz. For f ≳ 100 kHz, the inverted-V pattern becomes less distinct, and strong near-equatorial beaming is observed. After considering contamination of our selections by left-handed polarized AKR, our study suggests that besides LMCT another unidentified NTC generation mechanism becomes important for f ≳ 100 kHz.

Linear Mode Conversion Theory↗

The Development of an Educational Continuum to Meet Agricultural Workforce Needs

The poster explains the basic issues of a development of an educational continuum to meet agricultural workforce needs of Hendry County. The community needs include primarily jobs within the community, training of local biofuels workforce, education for profession-bound students, services for biofuels entrepreneurs, private farming system alternatives and an improvement of overall education system. These needs are to be met in Hendry County on various levels by its secondary education institutions, Edison State College and University of Florida. Each of these parties has a specific role in the overall education and training process, while the outcome of each is a local educated and trained workforce.

99 GENERAL AND MISCELLANEOUS↗

Particle–Continuum Coupling and its Scaling Regimes: Theory and Applications

Abstract This work is motivated by the goal of designing simulation software for technical devices that, at their functional core, rely on atomistic‐scale processes embedded in a larger‐scale fluid environment. The core of the problem is the conceptual and technical approach for coupling particle and continuum representations of a fluid. The state of the art for key aspects including physical modeling, mathematical formalization, computational implementation, and applications, is discussed and organized in a consistent picture across the relevant physical regimes.

Delle Site, Luigi↗

Mono‐Materials Created by Engineering a Continuum of P3HB Stereomicrostructures in a One‐Step Catalytic Process

Multi-material products that combine multiple complementary polymers can create products with desired performance but present challenges to end-of-life (EoL) management. The emerging mono-material product design based on a single polymer type addresses the fundamental EoL issue, but challenges of delivering vastly tunable material properties by the single polymer still remain. Here, we introduce a simple strategy to produce biodegradable poly(3-hydroxybutyrate) (P3HB) materials with a wide range of material properties by engineering a stereomicrostructure continuum, achieved through polymerizing diastereomeric mixtures of racemic and meso-dimethyl diolides at various feed ratios with a single catalyst. This one-step, one-pot process produces biodegradable P3HB mono-materials ranging from rigid to flexible thermoplastics, to tough thermoplastic elastomers, to a pressure-sensitive adhesive (PSA), which have been then combined to fabricate prototype all-P3HB PSA tapes, demonstrating the feasibility of designing mono-material products through engineering polymer stereomicrostructures.

36 MATERIALS SCIENCE↗

Are mixed explicit/implicit solvation models reliable for studying phosphate hydrolysis? A comparative study of continuum, explicit and mixed solvation models.

Phosphate hydrolysis is ubiquitous in biology. However, despite intensive research on this class of reactions, the precise nature of the reaction mechanism remains controversial. In this work, we have examined the hydrolysis of three homologous phosphate diesters. The solvation free energy was simulated by means of either an implicit solvation model (COSMO), hybrid quantum mechanical / molecular mechanical free energy perturbation (QM/MM-FEP) or a mixed solvation model in which N water molecules were explicitly included in the ab initio description of the reacting system (where N=1-3), with the remainder of the solvent being implicitly modelled as a continuum. Here, both COSMO and QM/MM-FEP reproduce Delta Gobs within an error of about 2kcal/mol. However, we demonstrate that in order to obtain any form of reliable results from a mixed model, it is essential to carefully select the explicit water molecules from short QM/MM runs that act as a model for the true infinite system. Additionally, the mixed models tend to be increasingly inaccurate the more explicit water molecules are placed into the system. Thus, our analysis indicates that this approach provides an unreliable way for modelling phosphate hydrolysis in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Verification of 5D continuum gyrokinetic code COGENT: Studies of kinetic drift wave instability

COGENT (Continuum Gyrokinetic Edge New Technology) is a kinetic plasma simulation code that is being developed by the edge simulation laboratory (ESL) collaboration. The original version of the code has been developed in a 4D phase space (2D configuration space and 2D velocity space) to address kinetic plasma phenomena in a complex magnetic field geometry including the core, magnetic separatrix, and scrape-off layer regions. This paper is focused on extending the original 4D phase space to a 5D phase space (3D2V) to address full kinetic turbulences in a tokamak edge region. Here, we report on the current status of 5D COGENT, which presently operates in a shear-less, simple slab geometry. As a verification study, we use the problems of collision-less drift wave instability (universal instability) including its modification in the presence of collisional effects. The simulation model includes the gyrokinetic equations for ion and electron species coupled to the long-wavelength limit of the gyro-Poisson equation. Collisional effects are represented by the Krook collision model. Linear analytical results for the drift mode growth rate and real frequency are recovered, and the non-linear stage is modelled and analysed as well. In addition, extensive 5D runs have been performed to address the effects of the drift wave instability on blob/filamentary structures characteristic of a tokamak edge. Finally, a helical-shaped potential perturbation is observed to grow exponentially in time while spinning around the filament axis with electron drift frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrodynamic trait coordination and cost–benefit trade‐offs throughout the isohydric–anisohydric continuum in trees

Abstract Whole‐plant hydraulic performance depends on the integrated function of trait complexes, such as embolism resistance, stomatal closure mechanisms, and root properties. The diversity of such traits produces a wide range of response strategies to both short‐term variation of environmental conditions and long‐term changes to climate and hydrological cycles. This study aims to assess the role of different emergent hydraulic trait combinations in trees' vulnerability to drought using a quantitative modelling framework. This modelling framework may be helpful in studying the influence of plant hydraulic traits independently. It will also be used to assess how different groups of traits interact to form viable hydraulic strategies in response to different environmental conditions. We use the advanced plant hydrodynamic model, finite‐difference ecosystem‐scale tree crown hydrodynamics model version 2, to resolve plant functional traits of roots, stems, and leaves and simulate the transpiration. We define a multidimensional hydraulic “strategy space” by considering a continuum of these traits to test the outcomes of different hypothetical strategies in response to environmental conditions as observed in Northern Michigan, USA. We evaluate the degree to which simulated trees suffer hydraulic failure due to cavitation or carbon deficiency in response to reduced stomatal conductance. Our results demonstrate how the relationship between plant hydraulic strategy and hydraulic safety margin emerges from trait combinations along different tissue levels. Our findings suggest that hydrodynamic models present an exciting new possibility to define and study plant traits and hydrodynamics.

Mirfenderesgi, Golnazalsadat↗

A thermomechanical anisotropic continuum model for geological materials with multiple joint sets

Joints in geological materials introduce elastic compliance and weak planes on which sliding can occur. Although these materials can have multiple joint sets, they often have preferred orientations that cause both elastic and inelastic anisotropic response even when the unjointed material is isotropic. Azimuthal variations in radial velocity and polarity of tangential motion have been observed in experimental data for wave propagation caused by an initially spherical source in a geological material with multiple joint sets. This observed tangential ground motion was found to be related to mechanical anisotropy caused by preferred orientations of joints in the rock. This paper describes thermomechanical continuum constitutive equations, which model the effects of multiple persistent joint sets. A number of quasi–static examples are considered, which show that the proposed model predicts anisotropic effects of sliding on multiple joint sets similar to those exhibited by computationally expensive mesoscale calculations, which model joint sets explicitly.

58 GEOSCIENCES↗

Ghost forces and spurious effects in atomic‐to‐continuum coupling methods by the Arlequin approach

The main purpose of this work is to identify spurious effects and propose a corrective method when coupling a particle model involving long–range interaction potentials with a first gradient homogenized model using the Arlequin framework. The most significant spurious effects are generally created by the so-called ghost forces that arise in coupling methods based on the minimization of a global energy functional. They depend as well on the coupling formulation itself, on the notion of representative volume element, and on the discretization of the continuum model. The proposed corrective technique is based on post-processing of the approximate solution by introducing dead forces that can be systematically evaluated and consistently inserted within the Arlequin formulation. Efficiency of the corrective procedure is demonstrated on 1D and 2D examples.

97 MATHEMATICS AND COMPUTING↗

Solvation thermodynamics of neutral and charged solutes using the solvation‐layer interface condition continuum dielectric model

Abstract We demonstrate that the solvation‐layer interface condition (SLIC) continuum dielectric model for molecular electrostatics, combined with a simple solvent‐accessible‐surface‐area (SASA)‐proportional model for nonpolar solvent effects, accurately predicts solvation entropies of neutral and charged small molecules. The SLIC/SASA model has only seven fitting parameters in total and achieves this accuracy using a training set with only 20 compounds. Despite this simplicity, solvation free energies and entropies are nearly as accurate as those predicted by the more sophisticated Langevin dipoles solvation model. Surprisingly, the model automatically reproduces the negligible contribution of electrostatics to the solvation of hydrophobic compounds. Opportunities for improvement include nonpolar solvation, anion solvation entropies, and heat capacities. More molecular realism may be needed for these quantities. To enable a future, explicit‐solvent‐based assessment of the SLIC/SASA implicit‐solvent model, we predict solvation entropies for the Mobley test set, which are available as Supporting Information.

Mehdizadeh Rahimi, Ali↗

How resonance-continuum interference changes 750 GeV diphoton excess: Signal enhancement and peak shift

A hypothetical new scalar resonance, a candidate explanation for the recently observed 750 GeV diphoton excess at the LHC 13 TeV, necessarily interferes with the continuum background gg → γγ. The interference has two considerable effects: (1) enhancing or suppressing diphoton signal rate due to the imaginary-part interference and (2) distorting resonance shape due to the real-part interference. We study them based on the best-fit analysis of two benchmark models: two Higgs doublets with ~50 GeV width (exhibiting the imaginary-part interference effect) and a singlet scalar with 5 GeV width (exhibiting the real-part one), both extended with vector-like fermions. Furthermore, we find that the resonance contribution can be enhanced by a factor of 2 (1.6) for 3 (6) fb signal rate, or the 68% CL allowed mass region is shifted by O (1) GeV. If the best-fit excess rate decreases in the future data, the interference effects will become more significant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Crossing Versus Locking: Bit Threads and Continuum Multiflows

Bit threads are curves in holographic spacetimes that manifest boundary entanglement, and are represented mathematically by continuum analogues of network flows or multiflows. Subject to a density bound, the maximum number of threads connecting a boundary region to its complement computes the Ryu–Takayanagi entropy. When considering several regions at the same time, for example in proving entropy inequalities, there are various inequivalent density bounds that can be imposed. Here, we investigate for which choices of bound a given set of boundary regions can be “locked”, in other words can have their entropies computed by a single thread configuration. We show that under the most stringent bound, which requires the threads to be locally parallel, non-crossing regions can in general be locked, but crossing regions cannot, where two regions are said to cross if they partially overlap and do not cover the entire boundary. We also show that, under a certain less stringent density bound, a crossing pair can be locked, and conjecture that any set of regions not containing a pairwise crossing triple can be locked, analogously to the situation for networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional nonlocal anisotropic elasticity: a generalized continuum theory of Ångström-mechanics

In this paper, based on Eringen’s theory of nonlocal anisotropic elasticity, the three-dimensional nonlocal anisotropic elasticity of generalized Helmholtz type is developed. The derivation of a new three-dimensional nonlocal anisotropic kernel, which is the Green function of the three-dimensional anisotropic Helmholtz equation, enables to capture anisotropic length scale effects by means of a length scale tensor, which is a symmetric tensor of rank two. The derived nonlocal kernel function possesses up to six internal characteristic lengths on the Ångström-scale. The presented theory of nonlocal elasticity possesses the appropriate property to be a generalized continuum theory of Ångström-mechanics, since the range of its validity and applicability is up to the Ångström-scale. The connection between the theory of nonlocal anisotropic elasticity and lattice theory is established. The tensor function of nonlocal elastic moduli as well as the nonlocal kernel function is given in terms of the Hessian matrix in the lattice approach. In the framework of the considered theory, the modeling of dislocations in anisotropic materials taking into consideration anisotropic dislocation core effects is presented. Important dislocation key formulas, namely the anisotropic Peach–Koehler stress formula, the Peach–Koehler force and the anisotropic Blin’s formula, are derived. A major tool used in deriving the expression of anisotropic Blin’s formula is Kirchner’s so-called FF-tensor, which is here generalized toward nonlocal anisotropic elasticity. The main feature and advantage of the derived fields, compared with the corresponding ones in classical anisotropic elasticity, is that they are free of singularities. Numerical applications to straight dislocations in bcc Fe are given, revealing the ability and advantage of the considered theory to describe adequately nonsingular anisotropic stress and self-energy fields capturing the effects of anisotropy on the Ångström-scale.

42 ENGINEERING↗

Hydro-mechanically coupled finite-element analysis of the stability of a fractured-rock slope using the equivalent continuum approach: a case study of planned reservoir banks in Blaubeuren, Germany

Construction works associated with the building of reservoirs in mountain areas can damage the stability of adjacent valley slopes. Seepage processes caused by the filling and drawdown operations of reservoirs also affect the stability of the reservoir banks over time. The presented study investigates the stability of a fractured-rock slope subjected to seepage forces in the lower basin of a planned pumped-storage hydropower (PSH) plant in Blaubeuren, Germany. The investigation uses a hydro-mechanically coupled finite-element analyses. For this purpose, an equivalent continuum model is developed by using a representative elementary volume (REV) approach. To determine the minimum required REV size, a large number of discrete fracture networks are generated using Monte Carlo simulations. These analyses give a REV size of 28 × 28 m, which is sufficient to represent the equivalent hydraulic and mechanical properties of the investigated fractured-rock mass. The hydro-mechanically coupled analyses performed using this REV size show that the reservoir operations in the examined PSH plant have negligible effect on the adjacent valley slope.

58 GEOSCIENCES↗