Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

A Spatially Resolved Evaluation of Accelerated Environmental Aging on Emerging Polypropylene-Based Photovoltaic Backsheets Using Raman Spectroscopy

For this work, accelerated aging was used to assess environmental degradation in emerging co-extruded polypropylene (PP)-based backsheets under three different environmental conditions (65°C/20% relative humidity (RH), 75°C/20% RH, and 75°C/50% RH). Although differential scanning calorimetry did not measure crystallinity changes with exposure, spatially resolved Raman spectroscopy identified crystallinity increases in the core layer of aged samples, indicating a heterogeneous postcrystallization process. The Raman results were in agreement with synchrotron-based microfocused wide-angle X-ray scattering measurements. Cross-sectional nanoindentation was used to correlate localized crystallinity shifts with changes in Young's modulus. A similar trend was found where increased modulus was measured in the core layer, supporting the relationship between modulus and crystallinity. Finally, dielectric characterization was used to assess the impact of these material property changes on performance. While changes in the backsheet material properties and dielectric performance were observed with accelerated aging, these shifts generally equilibrated with time, indicating overall stability in response to environmental stressors. Additionally, the identified heterogeneous material property changes indicate that spatially resolved crystallinity measurements may be a valuable early failure indicator to be used in the assessment of PV backsheet long-term durability.

36 MATERIALS SCIENCE↗

Roofline model toolkit: A practical tool for architectural and program analysis

We present preliminary results of the Roofline Toolkit for multicore, many core, and accelerated architectures. This paper focuses on the processor architecture characterization engine, a collection of portable instrumented micro benchmarks implemented with Message Passing Interface (MPI), and OpenMP used to express thread-level parallelism. These benchmarks are specialized to quantify the behavior of different architectural features. Compared to previous work on performance characterization, these microbenchmarks focus on capturing the performance of each level of the memory hierarchy, along with thread-level parallelism, instruction-level parallelism and explicit SIMD parallelism, measured in the context of the compilers and run-time environments. We also measure sustained PCIe throughput with four GPU memory managed mechanisms. By combining results from the architecture characterization with the Roofline model based solely on architectural specifications, this work offers insights for performance prediction of current and future architectures and their software systems. To that end, we instrument three applications and plot their resultant performance on the corresponding Roofline model when run on a Blue Gene/Q architecture.

97 MATHEMATICS AND COMPUTING↗

Multicomponent periodic nanoparticle superlattices.

In this article, we review the state-of-the-art in the preparation and characterization of multicomponent self-assembled superlattices of colloidal nanoparticles with core sizes in the range of 2-20 nm and interparticle spacing less than 2 nm down to intimate contact stemming from sintering. Several aspects of the field are discussed, including: structural organization, the role of particle size distribution, key interparticle forces at play, and methods of investigation of the structures. Contrary to the extensively studied colloidal crystals composed of microscale particles, the nanoparticles possess unique size-dependent properties, such as electronic, optical, or magnetic, which when combined into periodic structures can potentially lead to new collective states stemming from precise positioning of the nanocolloids. As such, we examine a number of emerging applications of this new class of metamaterials. Finally, we speculate on the potential impact of these materials, the new directions, and the challenges for the researchers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three complexes of Cu(I) cluster with flexible and rigid ligands: Synthesis, characterization and photoluminescent properties

Three new Cu(I) cluster complexes, viz. [(Cu{sub 4}I{sub 4})(Cu{sub 2}I{sub 2})(dimb){sub 3}]{sub n} (1; dimb=1,4-diimidazol-1-ylbutane), [(Cu{sub 3}I{sub 2})(dimb)(dmtz)]{sub n} (2; dmtz=3,5-dimethyl-1,2,4-triazole), and [Cu{sub 6}(mbt){sub 6}] (3; mbt=2-mercaptobenzothiazole), have been solvothermally synthesized and structurally characterized. In 1, a Cu{sub 4}I{sub 4} cubane core as a 4-connecting node, connects the neighboring nodes either through single dimb or μ{sub 2}-[(Cu{sub 2}I{sub 2})(dimb){sub 2}] linkers, affording an undulated 2D (4,4) net. Parallel interpenetration occurs between the adjacent nets and thus the overall 2D→3D network is formed. Complex 2 is constructed by 2D (4,4) topological plane grid layers of AB stacking. The core, a distorted triangular bipyramidal Cu{sub 3}I{sub 2} cluster, is acted as a 4-connecting node and connected with dimb and μ{sub 3}-dmtz to form the layer. Complex 3 contains a (Cu{sub 6}S{sub 6}) core in discrete paddle-wheel molecule, which serves as a 4-connecting node to link equivalent ones via π···π interaction, forming 2D (4,4) layers. Solid-state luminescence properties and thermogravimetric analyses of 1, 2 and 3 were investigated. - Graphical abstract: Complexes based on Cu(I) clusters possess two-fold 2D→3D parallel interpenetrating (1), triple emissions (2) and near-infrared emission (3). - Highlights: • Complex 1 represents two-fold 2D→3D parallel interpenetrating framework. • Complex 2 shows triple emissions. • Complex 3 displays a quite intense near-infrared (NIR) emission. • These complexes have good thermal stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl{sub 2}O{sub 4}-SiC core-shell microcomposites

Interface between ceramic particulate and matrix is known to control the response of the materials and functionality of the composite. Among numerous physical properties, grain structure of the materials has also played a significant role in defining the behaviour of metal matrix composites. Usually, silicon carbide (SiC) particles show poor interfacial wettability in aluminium melt. Herein, we were successfully synthesized magnesium oxide (MgO) and nanocrystalline magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel coated silicon carbide (SiC) core-shell micro-composites through sol-gel technique to improve the wettability of dispersoids. Core-shell structures of submicron size were thoroughly investigated by various characterization techniques. Further, aluminium matrix composites incorporated with pristine SiC, MgO grafted SiC and MgAl{sub 2}O{sub 4} grafted SiC particles were fabricated by stir casting technique, respectively. Additionally, as-cast composites were processed via friction stir processing (FSP) technique to observe the influence of grain refinement on mechanical and damping properties. Electron back scattered diffraction (EBSD), Field emission scanning electron microscopy (FE-SEM) and X-ray energy dispersion spectroscopy (EDX) analysis were conducted for investigating grain size refinement, adequate dispersion, stability and de-agglomeration of encapsulated SiC particles in aluminium matrix. The mechanical as well as thermal cyclic (from − 100 to 400 °C) damping performance of the as-cast and friction stir processed composites were studied, respectively. Finally, the enhanced properties were attributable to reduced agglomeration, stabilization and proper dispersion of the tailored SiC particles Al matrix. - Highlights: •Synthesizing a novel coating layer of MgO and MgAl{sub 2}O{sub 4} spinel onto SiC particles •Significant improvement in UTS and hardness by reinforcing tailored SiC in Al •Significant grain refinements were obtained through FSP •SiC/MgAl{sub 2}O{sub 4}/Al exhibits ~ 61% higher storage modulus as compare to pure Al after FSP.

36 MATERIALS SCIENCE↗

Petrophysical and Geochemical Properties of Columbia River Flood Basalt: Implications for Carbon Sequestration

Abstract This study presents borehole geophysical data and sidewall core chemistry from the Wallula Pilot Sequestration Project in the Columbia River flood basalt. The wireline logging data were reprocessed, core-calibrated and interpreted in the framework of reservoir and seal characterization for carbon dioxide storage. Particular attention is paid to the capabilities and limitations of borehole spectroscopy for chemical characterization of basalt. Neutron capture spectroscopy logging is shown to provide accurate concentrations for up to 8 major and minor elements but has limited sensitivity to natural alteration in fresh-water basaltic reservoirs. The Wallula borehole intersected 26 flows from 7 members of the Grande Ronde formation. The logging data demonstrate a cyclic pattern of sequential basalt flows with alternating porous flow tops (potential reservoirs) and massive flow interiors (potential caprock). The log-derived apparent porosity is extremely high in the flow tops (20%-45%), and considerably overestimates effective porosity obtained from hydraulic testing. The flow interiors are characterized by low apparent porosity (0-8%) but appear pervasively fractured in borehole images. Electrical resistivity images show diverse volcanic textures and provide an excellent tool for fracture analysis, but neither fracture density nor log-derived porosity uniquely correlate with hydraulic properties of the Grande Ronde formation. While porous flow tops in these deep flood basalts may offer reservoirs with high mineralization rates, long leakage migration paths, and thick sections of caprock for CO2 storage, a more extensive multi- well characterization would be necessary to assess lateral variations and establish sequestration capacity in this reservoir.

Petrophysical Geochemical Properties Columbia Rive↗

Attosecond pulse shaping using a seeded free-electron laser

Attosecond pulses are central to the investigation of valence- and core-electron dynamics on their natural timescales. The reproducible generation and characterization of attosecond waveforms has been demonstrated so far only through the process of high-order harmonic generation. Several methods for shaping attosecond waveforms have been proposed, including the use of metallic filters, multilayer mirrors and manipulation of the driving field. However, none of these approaches allows the flexible manipulation of the temporal characteristics of the attosecond waveforms, and they suffer from the low conversion efficiency of the high-order harmonic generation process. Free-electron lasers, by contrast, deliver femtosecond, extreme-ultraviolet and X-ray pulses with energies ranging from tens of microjoules to a few millijoules. Recent experiments have shown that they can generate subfemtosecond spikes, but with temporal characteristics that change shot-to-shot. In this paper we report reproducible generation of high-energy (microjoule level) attosecond waveforms using a seeded free-electron laser. We demonstrate amplitude and phase manipulation of the harmonic components of an attosecond pulse train in combination with an approach for its temporal reconstruction. The results presented here open the way to performing attosecond time-resolved experiments with free-electron lasers.

47 OTHER INSTRUMENTATION↗

Back Cover image and language for "Evaluating the Bis-isoxazole Core for Energetic Heterocyclic-Based Oligomers"

Development of energetic polymers is at the forefront of the energetics research enterprise. Formulations having high energy density as well as robust safety are goals that can be realized with implementation of new energetic polymers that target performance and mechanical properties. Presented herein are a series of oligomers synthesized from the small molecule BIDO (1) as our group's first attempt at making heterocyclic based energetic polymers without sensitive explosophores. Crystallographic investigation of the BIDO core with surrogate addends demonstrated the significant stacking ability of the BIDO core. Synthesis of four unique oligomers (3–6) is presented and characterized by spectroscopic and thermochemical measurements. Polymerization of 6 was demonstrated and tested for T g and thermal sensitivity, and Shore A hardness. The polymer 7 exhibits a T g value (-18 °C), close to the operating range of other energetic materials, a Shore A hardness of 81, and thermally stable up to 320 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Narrow gap electronegative capacitive discharges

Narrow gap electronegative (EN) capacitive discharges are widely used in industry and have unique features not found in conventional discharges. In this paper, plasma parameters are determined over a range of decreasing gap length L from values for which an electropositive (EP) edge exists (2-region case) to smaller L-values for which the EN region connects directly to the sheath (1-region case). Parametric studies are performed at applied voltage V{sub rf}=500 V for pressures of 10, 25, 50, and 100 mTorr, and additionally at 50 mTorr for 1000 and 2000 V. Numerical results are given for a parallel plate oxygen discharge using a planar 1D3v (1 spatial dimension, 3 velocity components) particle-in-cell (PIC) code. New interesting phenomena are found for the case in which an EP edge does not exist. This 1-region case has not previously been investigated in detail, either numerically or analytically. In particular, attachment in the sheaths is important, and the central electron density n{sub e0} is depressed below the density n{sub esh} at the sheath edge. The sheath oscillations also extend into the EN core, creating an edge region lying within the sheath and not characterized by the standard diffusion in an EN plasma. An analytical model is developed using minimal inputs from the PIC results, and compared to the PIC results for a base case at V{sub rf}=500 V and 50 mTorr, showing good agreement. Selected comparisons are made at the other voltages and pressures. A self-consistent model is also developed and compared to the PIC results, giving reasonable agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laboratory study of nitrate photolysis in Antarctic snow. II. Isotopic effects and wavelength dependence

Atmospheric nitrate is preserved in Antarctic snow firn and ice. However, at low snow accumulation sites, post-depositional processes induced by sunlight obscure its interpretation. The goal of these studies (see also Paper I by Meusinger et al. [“Laboratory study of nitrate photolysis in Antarctic snow. I. Observed quantum yield, domain of photolysis, and secondary chemistry,” J. Chem. Phys. 140, 244305 (2014)]) is to characterize nitrate photochemistry and improve the interpretation of the nitrate ice core record. Naturally occurring stable isotopes in nitrate ({sup 15}N, {sup 17}O, and {sup 18}O) provide additional information concerning post-depositional processes. Here, we present results from studies of the wavelength-dependent isotope effects from photolysis of nitrate in a matrix of natural snow. Snow from Dome C, Antarctica was irradiated in selected wavelength regions using a Xe UV lamp and filters. The irradiated snow was sampled and analyzed for nitrate concentration and isotopic composition (δ{sup 15}N, δ{sup 18}O, and Δ{sup 17}O). From these measurements an average photolytic isotopic fractionation of {sup 15}ε = (−15 ± 1.2)‰ was found for broadband Xe lamp photolysis. These results are due in part to excitation of the intense absorption band of nitrate around 200 nm in addition to the weaker band centered at 305 nm followed by photodissociation. An experiment with a filter blocking wavelengths shorter than 320 nm, approximating the actinic flux spectrum at Dome C, yielded a photolytic isotopic fractionation of {sup 15}ε = (−47.9 ± 6.8)‰, in good agreement with fractionations determined by previous studies for the East Antarctic Plateau which range from −40 to −74.3‰. We describe a new semi-empirical zero point energy shift model used to derive the absorption cross sections of {sup 14}NO{sub 3}{sup −} and {sup 15}NO{sub 3}{sup −} in snow at a chosen temperature. The nitrogen isotopic fractionations obtained by applying this model under the experimental temperature as well as considering the shift in width and center well reproduced the values obtained in the laboratory study. These cross sections can be used in isotopic models to reproduce the stable isotopic composition of nitrate found in Antarctic snow profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High performance power handling in the absence of an H-mode edge in negative triangularity DIII-D plasmas

Abstract Experiments performed during strongly-shaped high-power diverted negative triangularity (NT) experiments in DIII-D achieved detached divertor conditions and a transient-free edge, showcasing the potential for application of NT to a core-edge integrated reactor-like scenario and providing the first characterization of the parametric dependencies for detachment onset. Detached divertor conditions will be required in future devices to mitigate divertor heat fluxes. Access to dissipative divertor conditions was investigated via an increase in upstream density. Detachment onset at the outer strike point was achieved with H-mode level confinement H 98 − y 2 ∼ 1 and reactor-relevant normalized pressures β N ∼ 2 . Confinement degradation was observed with deeper detachment, associated with the loss of an electron temperature pedestal. Differences in geometry, radial transport, impact of cross field drifts are discussed to explain differences in access to detachment in NT discharges. Higher normalized densities, with respect to equivalent discharges in positive triangularity, were necessary to achieve detachment, partially explained by the shorter parallel connection length to the targets. The effect of cross-field particle drifts ( E × B , B × ∇ B ) on access to detachment was demonstrated by the lower upstream density needed to access detachment with ion B × ∇ B drift directed outside of the active divertor (Greenwald fraction f Gw ∼ 0.9–1.0 vs f Gw ∼ 1.3). The upstream density at detachment onset was observed to increase linearly with plasma current with ion B × ∇ B drift into the divertor, consistent with the observed narrowing of the scrape-off layer heat flux width λ q . Edge fluid simulations capture separatrix densities needed to achieve detachment in NT plasma and their dependence on drift direction. The ability to reproduce detachment dynamics in NT plasma increases the confidence in future design studies for NT divertors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Young but fading radio sources: searching for remnants among compact steep-spectrum radio sources

The incidence of young but fading radio sources provides important information on the life cycle of radio emission in radio-loud active galactic nuclei. Despite its importance for constraining the models of radio source evolution, there are no systematic studies of remnants in complete samples of young radio sources. We report results of the study of 18 compact steep-spectrum (CSS) radio sources, selected from the statistically complete B3-VLA (Very Large Array) CSS sample, characterized by a steep optically thin spectrum (α ≥ 1.0) and no core detection in earlier studies. Our deep multifrequency VLA, pc-scale Very Long Baseline Array, and enhanced Multi Element Remotely Linked Interferometer Network (e-MERLIN) observations allowed us to locate the core component in 10 objects. In three CSS sources, there is no clear evidence of present-time active regions, suggesting that they are likely in a remnant phase. Among sources with core detection, we find three objects that have no clear active regions (hotspots) at the edges of the radio structure, suggesting that the radio emission may have just restarted. Our results support a power-law distribution of the source ages, although the poor statistics prevents us from setting solid constraints on the percentage of remnants and restarted sources in subpopulations of radio sources.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-133: Dosimetric Impact of Scan Orientation Relative to Target Motion During Spot Scanning Proton Therapy

Purpose: This study seeks to evaluate the dosimetric effects of intra-fraction motion during spot scanning proton beam therapy as a function of beam-scan orientation and target motion amplitude. Method: Multiple 4DCT scans were collected of a dynamic anthropomorphic phantom mimicking respiration amplitudes of 0 (static), 0.5, 1.0, and 1.5 cm. A spot-scanning treatment plan was developed on the maximum intensity projection image set, using an inverse-planning approach. Dynamic phantom motion was continuous throughout treatment plan delivery.The target nodule was designed to accommodate film and thermoluminescent dosimeters (TLD). Film and TLDs were uniquely labeled by location within the target. The phantom was localized on the treatment table using the clinically available orthogonal kV on-board imaging device. Film inserts provided data for dose uniformity; TLDs provided a 3% precision estimate of absolute dose. An inhouse script was developed to modify the delivery order of the beam spots, to orient the scanning direction parallel or perpendicular to target motion.TLD detector characterization and analysis was performed by the Imaging and Radiation Oncology Core group (IROC)-Houston. Film inserts, exhibiting a spatial resolution of 1mm, were analyzed to determine dose homogeneity within the radiation target. Results: Parallel scanning and target motions exhibited reduced target dose heterogeneity, relative to perpendicular scanning orientation. The average percent deviation in absolute dose for the motion deliveries relative to the static delivery was 4.9±1.1% for parallel scanning, and 11.7±3.5% (p<<0.05) for perpendicularly oriented scanning. Individual delivery dose deviations were not necessarily correlated to amplitude of motion for either scan orientation. Conclusions: Results demonstrate a quantifiable difference in dose heterogeneity as a function of scan orientation, more so than target amplitude. Comparison to the analyzed planar dose of a single field hint that multiple-field delivery alters intra-fraction beam-target motion synchronization and may mitigate heterogeneity, though further study is warranted.

60 APPLIED LIFE SCIENCES↗

Self-Sealing Mafic Sills for Carbon and Hydrogen Storage

Tabular igneous intrusions (sills) are common features in sedimentary basins and have the potential to be useful seals for fluids (e.g., CO 2 or H 2 ) in geological storage scenarios, and may be important as the need for geologic carbon sequestration and alternative fuel storage increases. This is advantageous in regions without ready access to large-volume reservoirs in depleted hydrocarbon plays and saline aquifers, like the northeastern United States. Moreover, geological H 2 storage requires more demanding conditions than typically associated with oil and gas. An enhanced seal will have the properties of a traditional seal - competent, low permeability, and laterally extensive - with the addition of being able to self-seal pre-existing and induced fractures. Self-sealing will occur along fluid pathways like fractures where CO 2 , water, and minerals like plagioclase, olivine, and pyroxene react together. Dolerite sills from the Gettysburg Basin, Pennsylvania, have remarkably low permeability and homogeneous compositions that include minerals that will readily react with CO 2 dissolved in water. Here, we characterize the physical properties and chemical gradients within several mafic sills cored in five boreholes. In addition, preliminary CO 2 -reaction experiments on dolerite samples demonstrated rapid carbonate mineralization.

58 GEOSCIENCES↗

Development of Subspace-based Hybrid Monte Carlo-Deterministric Algorithms for Reactor Physics Calculations

The development of hybrid Monte-Carlo-Deterministic (MC-DT) approaches, taking place over the past few decades, have primarily focused on shielding and detection applications where the analysis requires a small number of responses, i.e. at the detector locations(s). This work further develops a recently introduced global variance reduction approach, denoted by the SUBSPACE approach is designed to allow the use of MC simulation, currently limited to benchmarking calculations, for routine engineering calculations. By way of demonstration, the SUBSPACE approach is applied to assembly level calculations used to generate the few-group homogenized cross-sections. These models are typically expensive and need to be executed in the order of 10 3 - 10 5 times to properly characterize the few-group cross-sections for downstream core-wide calculations. Applicability to k-eigenvalue core-wide models is also demonstrated in this work. Given the favorable results obtained in this work, we believe the applicability of the MC method for reactor analysis calculations could be realized in the near future.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dynamic Brazilian Tension Results on Core from Borehole U-15n, NNSS, in support of SPE

Dynamic Brazilian tension (DBR) tests from core hole U-15n are part of a larger material characterization effort for the Source Physics Experiment (SPE) project. This larger effort encompasses characterizing Climax Stock granite rock from the Nevada National Security Site (NNSS) both before and after each SPE shot. The current test series includes DBR tests on dry intact granite and fault material at depths of -85 and -150 ft.

36 MATERIALS SCIENCE↗