Search NASA⌕ Search

SEARCH · Search NASA

Results for “DECOUPLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Grain Boundary Phases in NbFeSb Half‐Heusler Alloys: A New Avenue to Tune Transport Properties of Thermoelectric Materials

Abstract Many thermoelectric materials benefit from complex microstructures. Grain boundaries (GBs) in nanocrystalline thermoelectrics cause desirable reduction in the thermal conductivity by scattering phonons, but often lead to unwanted loss in the electrical conductivity by scattering charge carriers. Therefore, modifying GBs to suppress their electrical resistivity plays a pivotal role in the enhancement of thermoelectric performance, zT . In this work, different characteristics of GB phases in Ti‐doped NbFeSb half‐Heusler compounds are revealed using a combination of scanning transmission electron microscopy and atom probe tomography. The GB phases adopt a hexagonal close‐packed lattice, which is structurally distinct from the half‐Heusler grains. Enrichment of Fe is found at GBs in Nb 0.95 Ti 0.05 FeSb, but accumulation of Ti dopants at GBs in Nb 0.80 Ti 0.20 FeSb, correlating to the bad and good electrical conductivity of the respective GBs. Such resistive to conductive GB phase transition opens up new design space to decouple the intertwined electronic and phononic transport in thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Probing Electrode Transformation under Dynamic Operation for Alkaline Water Electrolysis

Alkaline water electrolyzers (AWEs) play a pivotal role in the realm of large-scale hydrogen production. However, AWEs face significant challenges in electrode degradation particularly under dynamic operating conditions, induced by reverse current phenomenon during frequent startup/shutdown. Herein, this study aims to rationalize the degradation mechanisms of AWEs under these conditions. A three-electrode membrane electrode assembly (MEA) setup is first utilized to decouple polarization behaviors of anode and cathode in AWEs. Following a proposed accelerated stress testing protocol, the setup allows for tracking individual electrode performance transformations during frequent reverse current operation. Integrating operando cell studies with in situ and post-mortem characterizations, it is showed that continuous formation of highly active species, nickel (oxy)hydroxides, improves the anode performance for oxygen evolution reaction. On the contrary, irreversible oxidation of nickel to β-nickel hydroxide results in a severe degradation of cathode, leading to material dissolution, poor electrical conductivity and loss of catalytic activity for hydrogen evolution reaction. These results provide insights in nickel-based electrode transformation mechanisms for alkaline water electrolysis and indicate that cathode with higher redox reversibility can potentially improve durability of AWEs under dynamic conditions.

08 HYDROGEN↗
DOE OSTI2025

Challenges in Tracking Waste Reduction Performance Improvement in Manufacturing Plants

The recently released Circularity Gap Report 2023 by the Circle Economy Foundation states that the circularity score for the global economy is declining. The US Environmental Protection Agency (EPA) tracked municipal solid waste from 1960 to 2018 and found that 50% of the waste was destined for landfills. EPA estimates that US industry is responsible for 2.7 Gt of solid nonhazardous waste annually in the US mostly linear economy model. The circular economy framework aims to decouple economic value generation from the extraction of virgin materials from nature. The linear model of material extraction and disposal at the end of life is highly unsustainable. Manufacturing companies are adopting ambitious waste reduction targets to achieve sustainability. Through the Better Plants program, US DOE has established the Waste Reduction Network, which offers technical assistance to partners to achieve their ambitious waste reduction goals. Basic requirements of establishing a target include identifying a baseline, quantifying waste performance, and measuring progress over time. One problem faced by industry is unstandardized metrics for quantifying waste performance that may not be well suited to demonstrate progress. This paper studies traditional methods used to measure waste performance and highlights advantages, disadvantages, and limitations of each method. It also examines the suitability of applying the methods in different manufacturing circumstances. Finally, the paper presents a case study of a large manufacturer that faced inconsistencies in its tracked measurement metric. A solution was proposed and implemented to alter the methodology to enable more accurate waste performance tracking against a baseline.

circular economy↗
DOE OSTI2021

Promoting the Furan Ring‐Opening Reaction to Access New Donor–Acceptor Stenhouse Adducts with Hexafluoroisopropanol

Abstract Donor–acceptor Stenhouse adducts (DASAs) are visible‐light‐responsive photoswitches with a variety of emerging applications in photoresponsive materials. Their two‐step modular synthesis, centered on the nucleophilic ring opening of an activated furan, makes DASAs readily accessible. However, the use of less reactive donors or acceptors renders the process slow and low yielding, which has limited their development. We demonstrate here that 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) promotes the ring‐opening reaction and stabilizes the open isomer, allowing greatly reduced reaction times and increased yields for known derivatives. In addition, it provides access to previously unattainable DASA‐based photoswitches and DASA–polymer conjugates. The role of HFIP and the photochromic properties of a set of new DASAs is probed using a combination of 1 H NMR and UV/Vis spectroscopy. The use of sterically hindered, electron‐poor amines enabled the dark equilibrium to be decoupled from closed‐isomer half‐lives for the first time.

Clerc, Michèle↗
DOE OSTI2021

Promoting the Furan Ring‐Opening Reaction to Access New Donor–Acceptor Stenhouse Adducts with Hexafluoroisopropanol

Abstract Donor–acceptor Stenhouse adducts (DASAs) are visible‐light‐responsive photoswitches with a variety of emerging applications in photoresponsive materials. Their two‐step modular synthesis, centered on the nucleophilic ring opening of an activated furan, makes DASAs readily accessible. However, the use of less reactive donors or acceptors renders the process slow and low yielding, which has limited their development. We demonstrate here that 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) promotes the ring‐opening reaction and stabilizes the open isomer, allowing greatly reduced reaction times and increased yields for known derivatives. In addition, it provides access to previously unattainable DASA‐based photoswitches and DASA–polymer conjugates. The role of HFIP and the photochromic properties of a set of new DASAs is probed using a combination of 1 H NMR and UV/Vis spectroscopy. The use of sterically hindered, electron‐poor amines enabled the dark equilibrium to be decoupled from closed‐isomer half‐lives for the first time.

Clerc, Michèle↗
DOE OSTI2025

Blocky Selective Postpolymerization C–H Functionalization of Polyolefins

C–H functionalization of commodity polyolefins affords functional materials derived from a high-volume, low-cost resource. However, current postpolymerization modification strategies result in randomly distributed functionalization along the length of the polymer backbone, which has a negative impact on the crystallinity of the resultant polymers, and thus the thermomechanical properties. Here, we demonstrate an amidyl radical mediated C–H functionalization of polyolefins to access blocky microstructures, which exhibit a higher crystalline fraction, larger crystallite size, and improved mechanical properties compared to their randomly functionalized analogues. Taking inspiration from the site-selective C–H functionalization of small molecules, we leverage the steric protection provided by crystallites and target polymer functionalization to amorphous domains in a semicrystalline polyolefin gel. The beneficial outcomes of blocky functionalization are independent of the identity of the pendant functional group that is installed through functionalization. Here, the decoupling of functional group incorporation and crystallinity highlights the promise in accessing nonrandom microstructures through selective functionalization to circumvent traditional tradeoffs in postpolymerization modification, with potential impact in advanced materials and upcycling plastic waste.

Neidhart, Eliza K. [The University of North Caroli↗
DOE OSTI2025

Mechanistic Insights into Adsorptive and Catalytic Reactions from Controllable Distributions of Metal Cations (Pd, Pt, Ni, Cr, Cu) as [M‐OH] +1 /1Al or M +2 /2Al in Zeolites

Anchoring divalent metal ions in the same zeolite framework with similar Si/Al ratio selectively as zeolite-bound M +2 or [M +2 -OH] +1 cationic species enables critical comparison of the species’ intrinsic reactivity for industrially and fundamentally relevant reactions. H-BEA zeolites with similar Si/Al ratios but differing framework Al siting were used to anchored multiple divalent metal cations (Ni, Pd, Pt, Cr, Cu) in the zeolite micropores. State-of-the-art infrared (IR) spectroscopy, electron paramagnetic resonance (EPR) measurements, including two-dimensional pulsed HYSCORE EPR, extended X-ray absorption fine structure (EXAFS), and density functional theory (DFT) calculations together provide unambiguous evidence for the selective formation of divalent metal cations as M +2 /2Al species (for H-BEA prepared in the conventional hydroxide media), and [M +2 OH] +1 /1Al species for H-BEA prepared in HF. Solid-state proton-decoupled triple-quantum magic-angle spinning (3Q MAS) NMR measurements confirmed contrasting Al distributions in the two H-BEA zeolites, which led to a contrasting divalent cation speciation. The reactivities of the two cationic species were explored for catalytic and adsorptive applications in both organometallic homogeneous and heterogeneous catalysis. This work demonstrates their divergent reactivity in ethylene dimerization, ethylene oxidation (Wacker process), selective catalytic reduction (SCR) of NO, NO adsorption, and methane oxidation. Both M +2 /2Al and [M +2 OH] +1 /1Al cations are both active for ethylene dimerization, but [M +2 OH] +1 /1Al species show higher reaction rates for each Pd, Ni, Pt. [M +2 OH] +1 /1Al is active for acetaldehyde formation in Wacker ethylene oxidation. A new active site for ethylene oligomerization is proposed that possesses a terminal OH group (Cr-OH) in Phillips catalysts evident by a nearly inactive isolated Cr +2 /2Al species that contrast an active Cr─OH motif.

Divalent metal cations in a zeolite↗
DOE OSTI2026

Variations of Alloying Site Density in Pd 1 Cu Single‐Atom Alloy Catalysts Lead to Shifted Product Yields in Electrochemical CO Reduction

Single-atom alloy (SAA) catalysis research often reports that a SAA catalyst, in the general formulation of a single-atom metal M1 alloyed on the surface of the host metal M2, facilitates a probe reaction. However, for catalytic reactions that present decoupled rate- and selectivity-limiting steps, the alloying site density may significantly manipulate these independent steps, but it has rarely been explicitly examined for any SAA systems. Herein, using the electrocatalytic CO reduction as a probe reaction, we report that the nominal Pd 1 Cu cube SAA catalysts exhibit distinctive high reactivity toward ethylene or ethanol, respectively, depending on whether the Pd atoms are in dilute or crowded forms. Although the presence of single-atom Pd embedded on Cu uniformly promotes CHO* formation and C─C coupling, the dilute-Pd 1 Cu favors ethylene formation by enabling low-barrier C─O cleavage from a flat CH 2 CH 2 OH* intermediate, whereas the crowded-Pd 1 Cu promotes ethanol formation by stabilizing an upright hydrogenation transition state of the same intermediate. Furthermore, we present evidence that the catalytic chemistry of crowded Pd 1 species differs from that of the Pd 2 -dimer; the latter, albeit unstable, steers reaction selectivity to acetate instead. In conclusion, these results uncovered the underappreciated importance of controlling SAA catalytic chemistry from the perspective of single-atom site densities.

Jin, Zehua [Clemson University, SC (United States)↗
DOE OSTI2018

Enhancing hydrogen‐dependent growth of and carbon dioxide fixation by Clostridium ljungdahlii through nitrate supplementation

Abstract Synthesis gas (syngas) fermentation via the Wood–Ljungdahl pathway is receiving growing attention as a possible platform for the fixation of and renewable production of fuels and chemicals. However, the pathway operates near the thermodynamic limit of life, resulting in minimal adenosine triphosphate (ATP) production and long doubling times. This calls into question the feasibility of producing high‐energy compounds at industrially relevant levels. In this study, we investigated the possibility of co‐utilizing nitrate as an inexpensive additional electron acceptor to enhance ATP production during ‐dependent growth of Clostridium ljungdahlii , Moorella thermoacetica , and Acetobacterium woodii . In contrast to other acetogens tested, growth rate and final biomass titer were improved for C. ljungdahlii growing on a mixture of and when supplemented with nitrate. Transcriptomic analysis, labeling, and an electron balance were used to understand how electron flux was partitioned between and nitrate. We further show that, with nitrate supplementation, the ATP/adenosine diphosphate (ADP) ratio and acetyl‐CoA pools were increased by fivefold and threefold, respectively, suggesting that this strategy could be useful for the production of ATP‐intensive heterologous products from acetyl‐CoA. Finally, we propose a pathway for enhanced ATP production from nitrate and use this as a basis to calculate theoretical yields for a variety of products. This study demonstrates a viable strategy for the decoupling of ATP production from carbon dioxide fixation, which will serve to significantly improve the fixation rate and the production metrics of other chemicals from and in this host.

Emerson, David F.↗
DOE OSTI2025

Balancing Doses of EL222 and Light Improves Optogenetic Induction of Protein Production in Komagataella phaffii

ABSTRACT Komagataella phaffii, also known asPichia pastoris, is a powerful host for recombinant protein production, in part due to its exceptionally strong and tightly controlled P AOX1 promoter. MostK. phaffiibioprocesses for recombinant protein production rely on P AOX1 to achieve dynamic control in two‐phase processes. Cells are first grown under conditions that repress P AOX1 (growth phase), followed by methanol‐induced recombinant protein expression (production phase). In this study, we propose a methanol‐free approach for dynamic metabolic control inK. phaffiiusing optogenetics, which can help enhance input tunability and flexibility in process optimization and control. The light‐responsive transcription factor EL222 fromErythrobacter litoralisis used to regulate protein production from the P C120 promoter inK. phaffiiwith blue light. We used two system designs to explore the advantages and disadvantages of coupling or decoupling EL222 integration with that of the gene of interest. We investigate the relationship between EL222 gene copy number and light dosage to improve production efficiency for intracellular and secreted proteins. Experiments in lab‐scale bioreactors demonstrate the feasibility of the outlined optogenetic systems as potential alternatives to conventional methanol‐inducible bioprocesses usingK. phaffii.

Biotechnology & Applied Microbiology↗
DOE OSTI2024

Evaluating the potential of disaggregated memory systems for HPC applications

Summary Disaggregated memory is a promising approach that addresses the limitations of traditional memory architectures by enabling memory to be decoupled from compute nodes and shared across a data center. Cloud platforms have deployed such systems to improve overall system memory utilization, but performance can vary across workloads. High‐performance computing (HPC) is crucial in scientific and engineering applications, where HPC machines also face the issue of underutilized memory. As a result, improving system memory utilization while understanding workload performance is essential for HPC operators. Therefore, learning the potential of a disaggregated memory system before deployment is a critical step. This paper proposes a methodology for exploring the design space of a disaggregated memory system. It incorporates key metrics that affect performance on disaggregated memory systems: memory capacity, local and remote memory access ratio, injection bandwidth, and bisection bandwidth, providing an intuitive approach to guide machine configurations based on technology trends and workload characteristics. We apply our methodology to analyze thirteen diverse workloads, including AI training, data analysis, genomics, protein, fusion, atomic nuclei, and traditional HPC bookends. Our methodology demonstrates the ability to comprehend the potential and pitfalls of a disaggregated memory system and provides motivation for machine configurations. Our results show that eleven of our thirteen applications can leverage injection bandwidth disaggregated memory without affecting performance, while one pays a rack bisection bandwidth penalty and two pay the system‐wide bisection bandwidth penalty. In addition, we also show that intra‐rack memory disaggregation would meet the application's memory requirement and provide enough remote memory bandwidth.

Ding, Nan↗
DOE OSTI2018

Ion Dynamics in Ionic-Liquid-Based Li-Ion Electrolytes Investigated by Neutron Scattering and Dielectric Spectroscopy

A detailed understanding of the diffusion mechanisms of ions in pure and doped ionic liquids remains an important aspect in the design of new ionic-liquid electrolytes for energy storage. Here, to gain more insight into the widely used imidazolium-based ionic liquids, the relationship between viscosity, ionic conductivity, diffusion coefficients, and reorientational dynamics in the ionic liquid 3-methyl-1-methylimidazolium bis(trifluoromethanesulfonyl)imide (DMIM-TFSI) with and without lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) was examined. The diffusion coefficients for the DMIM + cation and the role of ion aggregates were investigated by using the quasielastic neutron scattering (QENS) and neutron spin echo techniques. Two diffusion mechanisms are observed for the DMIM + cation with and without Li-TFSI, that is, translational and local. The data additionally suggest that Li + ion transport along with ion aggregates, known as the vehicle mechanism, may play a significant role in the ion diffusion process. These dielectric-spectroscopy investigations in a broad temperature and frequency range reveal a typical α–β-relaxation scenario. The α relaxation mirrors the glassy freezing of the dipolar ions, and the β relaxation exhibits the signatures of a Johari–Goldstein relaxation. In contrast to the translational mode detected by neutron scattering, arising from the decoupled faster motion of the DMIM + ions, the α relaxation is well coupled to the dc charge transport, that is, the average translational motion of all three ion species in the material. Finally, the local diffusion process detected by QENS is only weakly dependent on temperature and viscosity and can be ascribed to the typical fast dynamics of glass-forming liquids.

25 ENERGY STORAGE↗
DOE OSTI2018

Key Single-Atom Electrocatalysis in Metal-Organic Framework (MOF)-Derived Bifunctional Catalysts

Metal-organic framework (MOF)-derived materials have attracted increasing interest and show promising catalytic performances in many fields. Intensive efforts have been focused on the structure design and metal-site integration in MOF-derived catalysts. However, the key catalytic processes related with the metal sites in MOF-derived catalysts that dominate the electrocatalytic performance still remain obscure. Herein, we show a neglected but critical issue in the pyrolytic synthesis of MOF-derived catalysts: the coupled evolution of dual sites, that is, metallic sites and single-atom metal sites. The identification of active sites of single-atom sites from the visible particles has been elucidated through the combined X-ray spectroscopic, electron microscopic, and electrochemical studies. Interestingly, after a total removal of metallic cobalt sites, catalysts with purified single-atom metal sites show no faltering activity for either the oxygen reduction reaction (ORR) or hydrogen evolution reaction (HER), while significantly enhanced ORR selectivity is achieved; this reveals the dominant activity and selectivity contribution from single-atom electrocatalysis. The insight of the coupled evolution of dual sites and the as-demonstrated dual-site decoupling strategies open up a new routine for the design and synthesis of MOF-derived catalysts with the optimized single-atom electrocatalysis towards various electrochemical reactions.

electrocatalysis↗
DOE OSTI2021

High foliar K and P resorption efficiencies in old-growth tropical forests growing on nutrient-poor soils

Resorption is the active withdrawal of nutrients before leaf abscission. This mechanism represents an important strategy to maintain efficient nutrient cycling; however, resorption is poorly characterized in old-growth tropical forests growing in nutrientpoor soils. We investigated nutrient resorption from leaves in 39 tree species in two tropical forests on the Guiana Shield, French Guiana, to investigate whether resorption efficiencies varied with soil nutrient, seasonality, and species traits. The stocks of P in leaves, litter, and soil were low at both sites, indicating potential P limitation of the forests. Accordingly, mean resorption efficiencies were higher for P (35.9%) and potassium (K; 44.6%) than for nitrogen (N; 10.3%). K resorption was higher in the wet (70.2%) than in the dry (41.7%) season. P resorption increased slightly with decreasing total soil P; and N and P resorptions were positively related to their foliar concentrations. We conclude that nutrient resorption is a key plant nutrition strategy in these old-growth tropical forests, that trees with high foliar nutrient concentration reabsorb more nutrient, and that nutrients resorption in leaves, except P, are quite decoupled from nutrients in the soil. Seasonality and biochemical limitation played a role in the resorption of nutrients in leaves, but species-specific requirements obscured general tendencies at stand and ecosystem level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Synthesis and Characterization of Methacrylamide-Based Block Random Copolymers via Amine Functionalization of Polystyrene- Block -Poly(Pentafluorophenyl Methacrylate) Toward Enhanced Amenability to Manufacturing Criteria in Nanolithography

Recent interest in manipulating the chemistry of block copolymers (BCPs) to manage the covarying properties necessary to meet manufacturing criteria in nanolithography has resulted in the development and expansion of the A-block-(B-random-C) BCP architecture, where the random block allows for the decoupling of thermodynamic and wetting properties. Previous reports of such BCPs have used click chemistry to create the desired random block, but all such instances possess additional functional groups that are susceptible to undesirable side reactions upon annealing, such as cross-linking and surface grafting. This study reports the substitution reaction of polystyrene-block-poly(pentafluorophenyl methacrylate) (PS-b-PPFMA) with primary amines. The resulting methacrylamide structure of the functionalized random block has only an amide linkage between the attached functional group and the polymer backbone, thereby omitting any sources of side reactions within the BCP. The outcomes of this report also demonstrate the enhanced thermal stability of these materials by virtue of their stable amide bonds. A range of random copolymer compositions is assessed to develop BCPs in which the random block has approximately the same surface energy as the PS block. These BCPs can self-assemble into perpendicular lamellae and are therefore promising candidates for directed self-assembly.

block copolymers↗