SEARCH · Search NASA

Results for “DEPTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS1981

The accommodation of relative motion at depth on the San Andreas fault system in California

Plate motion below the seismogenic layer along the San Andreas fault system in California is assumed to form by aseismic slip along a deeper extension of the fault or may result from lateral distribution of deformation below the seismogenic layer. The shallow depth of California earthquakes, the depth of the coseismic slip during the 1906 San Francisco earthquake, and the presence of widely separated parallel faults indicate that relative motion is distributed below the seismogenic zone, occurring by inelastic flow rather than by aseismic slip on discrete fault planes.

Prescott, W. H.↗

NASA NTRS1980

Effective depth of spectral line formation in planetary atmospheres

The effective level of line formation for spectroscopic absorption lines has long been regarded as a useful parameter for determining average atmospheric values of the quantities involved in line formation. The identity of this parameter has recently been disputed. This paper reestablishes the dependence of this parameter on the average depth at which photons are absorbed in a semi-infinite atmosphere and shows that the mean depths derived by others are similar in nature and behavior.

Lestrade, J. P.↗

NASA NTRS1982

Radial widths, optical depths, and eccentricities of the Uranian rings

Observations of the stellar occultation by the Uranian rings of 15/16 August 1980 are used to estimate radial widths and normal optical depths for segments of rings 6, 5, 4, alpha, beta, eta, gamma, and delta. Synthetic occultation profiles are generated to match the observed light curves. A review of published data confirms the existence of width-radius relations for rings alpha and beta, and indicates that the optical depths of these two rings vary inversely with their radial widths. Masses are obtained for rings alpha and beta, on the assumption that differential precession is prevented by their self-gravity. A quantitative comparison of seven epsilon-ring occultation profiles obtained over a period of 3.4 yr reveals a consistent structure, which may reflect the presence of unresolved gaps and subrings.

Nicholson, P. D.↗

NASA NTRS1983

The XPS depth profiling and tribological characterization of ion-plated gold on various metals

Friction properties were measured with a gold film; the graded interface between gold and nickel substrate; and the nickel substrate. All sliding was conducted against hard silicon carbide pins in two processes. In the adhesive process, friction arises primarily from adhesion between sliding surfaces. In the abrasion process, friction occurs as a result of the hard pin sliding against the film, indenting into it, and plowing a series of grooves. Copper and 440 C stainless steel substrates were also used. Results indicate that the friction related to both adhesion and abrasion is influenced by coating depth. The trends in friction behavior as a function of film depth are, however, just the opposite. The graded interface exhibited the highest adhesion and friction, while the graded interface resulted in the lowest abrasion and friction. The coefficient of friction due to abrasion is inversely related to the hardness. The greater the hardness of the surface, the lower is the abrasion and friction. The microhardness in the graded interface exhibited the highest hardness due to an alloy hardening effect. Almost no graded interface between the vapor-deposited gold film and the substrates was detected.

Miyoshi, K.↗

NASA NTRS1983

Compositional depth profile of a native oxide LPCVD MNOS structure using X-ray photoelectron spectroscopy and chemical etching

It is pointed out that there is no report of an unambiguous analysis of the composition and interfacial structure of MNOS (metal-nitride oxide semiconductor) systems, despite the technological importance of these systems. The present investigation is concerned with a study of an MNOS structure on the basis of a technique involving the use of X-ray photoelectron spectroscopy (XPS) with a controlled stopped-flow chemical-etching procedure. XPS is sensitive to the structure of surface layers, while stopped-flow etching permits the controlled removal of overlying material on a scale of atomic layers, to expose new surface layers as a function of thickness. Therefore, with careful analysis of observed intensities at measured depths, this combination of techniques provides depth resolution between 5 and 10 A. According to the obtained data there is intact SiO2 at the substrate interface. There appears to be a thin layer containing excess bonds to silicon on top of the SiO2.

Wurzbach, J. A.↗

NASA NTRS1983

Why large earthquakes do not nucleate at shallow depths

Spontaneous rupture models were examined to determine if gradients of average stress-drop and average strength relative to ambient stress account for earthquake nucleation near the base of the seismogenic layer. The frictional strength has been proved to increase with normal stress, which (across a fault) increases with depth in concert with the frictional strength. It is assumed that the large earthquakes occur at a time when the applied stress is equal to the frictional strength. A gradient has been found in frictional strength relative to the ambient stress and the stress-drop with depth. Attention is given to two cases where a circular crack appears, and radiates outward. It is shown that nucleation in the lower part of the seismogenic region will permit growth into a large earthquake, while nucleation in the lower stress-drop regime will encapsulate the crack. It is concluded that only cracks propagating in a high stress-drop regime can move easily into a relatively lower strength region.

Das, S.↗

NASA NTRS1983

Airborne detection of oceanic turbidity cell structure using depth-resolved laser-induced water Raman backscatter

Airborne laser-induced, depth-resolved water Raman backscatter is useful in the detection and mapping of water optical transmission variations. This test, together with other field experiments, has identified the need for additional field experiments to resolve the degree of the contribution to the depth-resolved, Raman-backscattered signal waveform that is due to (1) sea surface height or elevation probability density; (2) off-nadir laser beam angle relative to the mean sea surface; and (3) the Gelbstoff fluorescence background, and the analytical techniques required to remove it. When converted to along-track profiles, the waveforms obtained reveal cells of a decreased Raman backscatter superimposed on an overall trend of monotonically decreasing water column optical transmission.

Hoge, F. E.↗

NASA NTRS1983

Seismicity, fault plane solutions, depth of faulting, and active tectonics of the Andes of Peru, Ecuador, and southern Colombia

The long-period P waveforms observed for 17 earthquakes in the Peruvian Andes during 1963-1976 are compared with synthetic waveforms to obtain fault-plane solutions and focal depths. The morphological units of the Peruvian Andes are characterized: coastal plains, Cordillera Occidental, altiplano and central high plateau, Cordillera Oriental, and sub-Andes. The data base and analysis methodology are discussed, and the results are presented in tables, diagrams, graphs, maps, and photographs illustrating typical formations. Most of the earthquakes are shown to occur in the transition zone from the sub-Andes to the Cordillera Oriental under formations of about 1 km elevation at focal depths of 10-38 km. It is suggested that the sub-Andean earthquakes reflect hinterland deformation of a detached fold and thrust belt, perhaps like that which occurred in parts of the Canadian Rockies. From the total crustal shortening evident in Andean morphology and the shortening rate of the recent earthquakes it is estimated that the topography and crustal root of the Andes have been formed during the last 90-135 Myr.

Suarez, G.↗

NASA NTRS1983

The X-ray photoelectron spectroscopy depth profiling and tribological characterization of ion-plated gold on various metals

For the case of ion-plated gold, the graded interface between gold and a nickel substrate and a nickel substrate, such tribological properties as friction and microhardness are examined by means of X-ray photoelectron spectroscopy analysis and depth profiling. Sliding was conducted against SiC pins in both the adhesive process, where friction arises from adhesion between sliding surfaces, and abrasion, in which friction is due to pin indentation and groove-plowing. Both types of friction are influenced by coating depth, but with opposite trends: the graded interface exhibited the highest adhesion, but the lowest abrasion. The coefficient of friction due to abrasion is inversely related to hardness. Graded interface microhardness values are found to be the highest, due to an alloying effect. There is almost no interface gradation between the vapor-deposited gold film and the substrate.

Miyoshi, K.↗

NASA NTRS1984

Coherent tilt signals observed in the Shumagin seismic gap Detection of time-dependent subduction at depth?

Repeated surveys of short level lines in the Shumagin Islands, Alaska, reveal coherent tilt signals associated with subduction of the Pacific plate beneath the North American plate in the Shumagin seismic gap. Ten years of steady tilt down toward the trench is interrupted during 1978-1980 by a rapid episode of reverse tilt. The 'normal' tilt represents surface deformation as subduction occurs, with the plate boundary locked to at least 60 km depth. Using all available tilt, sea level, and seismic data, the tilt reversal is interpreted as due to an episodic reverse slip of about 80 cm magnitude on the plate boundary between about 70 km and 20 km depth, downdip from the main seismogenic zone, which remains locked. This event causes an increase of stress on the locked main thrust zone. It is speculated that such events may be a regular process at subduction zones, that great plate boundary earthquakes may be more common during their occurrence, and that their onset may be detectable early enough to give warning of an increase in probability for the occurrence of a great earthquake.

Beavan, J.↗

NASA NTRS1985

Lunar Mascon Loading: an Example of the Importance of Fault Initiation Depth on Fault Type Predictions from Stresses on Planetary Surfaces

Geophysical models that predict fault type from stresses calculated at the planetary surface (zero depth) can be misleading because faults generally initiate at depth under a different stress regime and propagate to the surface. The generally accepted and most commonly employed criteria for fault prediction from calculated stresses on planetary surfaces points out problems in neglecting the effects of non-isotropic overburden stresses and the use of realistic material constants and shows a well known example (mascon loading on the moon) where neglecting this effect predicts a different type of fault than is actually observed.

Golombek, M. P.↗

NASA NTRS1985

On the determination of the depth of EAS development maximum using the lateral distribution of Cerenkov light at distances 150 m from EAS axis

The Samarkand extensive air showers (EAS) array was used to measure the mean and individual lateral distribution functions (LDF) of EAS Cerenkov light. The analysis of the individual parameters b showed that the mean depth of EAS maximum and the variance of the depth distribution of maxima of EAS with energies of approx. 2x10 to the 15th power eV can properly be described in terms of Kaidalov-Martirosyan quark-gluon string model (QGSM).

Aliev, N.↗

NASA NTRS1985

A new world survey expression for cosmic ray vertical intensity vs. depth in standard rock

The cosmic ray data on vertical intensity versus depth below 10 to the 5th power g sq cm is fitted to a 5 parameter empirical formula to give an analytical expression for interpretation of muon fluxes in underground measurements. This expression updates earlier published results and complements the more precise curves obtained by numerical integration or Monte Carlo techniques in which the fit is made to an energy spectrum at the top of the atmosphere. The expression is valid in the transitional region where neutrino induced muons begin to be important, as well as at great depths where this component becomes dominant.

Crouch, M.↗

NASA NTRS1985

Fault type predictions from stress distributions on planetary surfaces - Importance of fault initiation depth

The prediction of fault type on planetary surfaces from model stresses calculated at depth is discussed. These fault-type predictions yield different faults than those predicted using the surface criteria commonly employed in geophysical models. For elastic-plate flexure models of mascon loading on the moon, stresses calculated at the surface predict the occurrence of strike-slip faulting at the radial distance where grabens are found. Normal faults bounding lunar grabens and thrust faults responsible for wrinkle ridges are analyzed. It is found that the former initiate at the mechanical discontinuity that separates the breccia of the megaregolith from in situ fractured rock and that the latter initiate at the mechanical discontinuity between basalt layers and the underlying basin floor. The difference between elastic constants for the outer few kilometers of brecciated megaregolith and the underlying lunar lithosphere are evaluated. Superposing nonisotropic stresses resulting from the weight of overburden to the depth of the relevant mechanical discontinuity yield stresses that predict wrinkle ridges in the basin centers and grabens outside the basin margin, and eliminate the predicted zone of strike-slip faults.

Golombek, M. P.↗

NASA NTRS1986

Studies on cosmogenic nuclides in meteorites with regard to an application as potential depth indicators

Measurements of stable and radioactive spallation products in meteorites allow to investigate their histories, especially with respect to the exposure to galactic cosmic ray particles and the pre-atmospheric size of the object. While the concentrations of spallation products lead to the determination of exposure and terrestrial ages, production rate ratios are characteristic for the location of the sample in the meteorite. So, one of the aims of this investigation on meteorites is to obtain depth indicators from suitable pairs of cosmogenic nuclides. Because of the different depth profiles for nuclide productions it is necessary to determine the concentrations of a larger number of spallation products in aliquots of a single small sample. Such same sample measurements of Be-10 and light noble gases were performed on 15 ordinary chondrites (7 H- and 8 L-chondrites. Be-10 was determined by accelerator mass spectrometry and the noble gases were measured by static mass spectrometry. The results are summarized and discussed.

Sarafin, R.↗

NASA NTRS1985

Variations in stratospheric aerosol optical depth during northern warmings

In this paper, the properties of the stratospheric aerosol optical depth (above 50 mbar) have been studied by using aerosol extinction profiles (at 1 micron) derived from the Stratospheric Aerosol Measurement and Stratospheric Aerosol and Gas Experiment (SAGE) during warming periods in the Northern Hemisphere. It is shown that, during the disturbed periods in winter, low values of aerosol optical depth (less than 0.0002) are found within the low-pressure system(s) (at the 30-mbar pressure surface), while high values are found outside. Similar characteristics are found to exist for the simultaneously observed SAGE O3 and NO2 columnar density distributions. Strong longitudinal gradients are shown with the low values within and wherever the vortex exists. This characteristic is maintained during and after the circumpolar vortex is disturbed, even after breakdown, indicating an isolation of the material within the vortex.

Wang, P.-H.↗

NASA NTRS1986

Depth determination for shallow teleseismic earthquakes Methods and results

Contemporary methods used to determine depths of moderate-sized shallow teleseismic earthquakes are described. These include techniques based on surface wave spectra, and methods which estimate focal depth from the waveforms of body waves. The advantages of different methods and their limitations are discussed, and significant results for plate tectonics, obtained in the last five years by the application of these methods, are presented.

Stein, Seth↗

NASA NTRS1987

The effect of wave breaking on wave spectrum in water of finite depth

An approximate method is devised to compute the energy-containing portion of the spectrum of waves in water of finite depth, taking into account the effect of wave breaking. It is assumed that there exists a linear and Gaussian ideal wave train whose spectrum is first calculated using the wave energy flux balance equation without considering wave breaking. The Miche wave-breaking criterion for waves in water of finite depth is then applied to limit the wave elevation and establish an expression for the breaking wave elevation in terms of the elevation and elevation's second time derivative of the ideal waves. Simple expressions for the mean value, the mean square value, and the spectrum of the breaking waves are then obtained, and numerical results are presented graphically.

Tung, C. C.↗