Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Predicting phase behavior in high entropy and chemically complex alloys

The interest in high entropy alloys and other metallic compounds with four or more elements at near-equiatomic ratios has drawn attention to the ability to rapidly predict phase behavior of these complex materials, particularly where existing thermodynamic data are lacking. In this paper, we discuss aspects of this from the point of view of predicting without utilizing (or fitting) experimental data. Of particular interest are heuristic approaches that provide prediction of single-phase compositions, more rigorous approaches that tackle the thermodynamics from a more fundamental point of view, and simulation approaches that provide further insight into the behaviors. This paper covers cases of all three of these, in order to examine the strengths and weaknesses of each approach, and to indicate directions where these may be utilized and improved upon. Of particular interest is moving beyond “which composition may form a solid solution,” to recognizing the importance of underlying thermodynamic realities that affect the temperature- and composition-dependent transformations of these materials.

36 MATERIALS SCIENCE↗

Contributed Review: Culet diameter and the achievable pressure of a diamond anvil cell: Implications for the upper pressure limit of a diamond anvil cell

Recently, static pressures of more than 1.0 TPa have been reported, which raises the question: what is the maximum static pressure that can be achieved using diamond anvil cell techniques? Here in this paper we compile culet diameters, bevel diameters, bevel angles, and reported pressures from the literature. We fit these data and find an expression that describes the maximum pressure as a function of the culet diameter. An extrapolation of our fit reveals that a culet diameter of 1 μm should achieve a pressure of ~1.8 TPa. Additionally, for pressure generation of ~400 GPa with a single beveled diamond anvil, the most commonly reported parameters are a culet diameter of ~20 μm, a bevel angle of 8.5°, and a bevel diameter to culet diameter ratio between 14 and 18. Our analysis shows that routinely generating pressures more than ~300 GPa likely requires diamond anvil geometries that are fundamentally different from a beveled or double beveled anvil (e.g., toroidal or double stage anvils) and culet diameters that are ≤20 μm.

36 MATERIALS SCIENCE↗

Flux pinning characteristics in cylindrical ingot niobium used in superconducting radio frequency cavity fabrication

We present the results of from DC magnetization and penetration depth measurements of cylindrical bulk large-grain (LG) and fine-grain (FG) niobium samples used for the fabrication of superconducting radio frequency (SRF) cavities. The surface treatment consisted of electropolishing and low temperature baking as they are typically applied to SRF cavities. The magnetization data were fitted using a modified critical state model. The critical current density Jc and pinning force Fp are calculated from the magnetization data and their temperature dependence and field dependence are presented. The LG samples have lower critical current density and pinning force density compared to FG samples which implies a lower flux trapping efficiency. This effect may explain the lower values of residual resistance often observed in LG cavities than FG cavities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

When LEP and Tevatron combined with WMAP and XENON100 shed light on the nature of dark matter

Recently, several astrophysical data or would-be signals has been observed in different dark-matter oriented experiments. In each case, one could fit the data at the price of specific nature of the coupling between the Standard Model (SM) particles and a light Dark Matter candidate: hadrophobic (INTEGRAL, PAMELA) or leptophobic (WMAP Haze, dijet anomalies of CDF, FERMI Galactic Center observation). In this work, we show that when one takes into account the more recent LEP and Tevatron analysis, a light thermal fermionic Dark Matter (∼<10 GeV) that couples to electrons is mainly ruled out if one combines the analysis with WMAP constraints. We also study the special case of scalar dark matter, using a single-photon events simulation to constrain the coupling of dark matter to electron.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical modeling of plasma-deposited ZnO films: Electron scattering at different length scales

In this work, an optical modeling study on electron scattering mechanisms in plasma-deposited ZnO layers is presented. Because various applications of ZnO films pose a limit on the electron carrier density due to its effect on the film transmittance, higher electron mobility values are generally preferred instead. Hence, insights into the electron scattering contributions affecting the carrier mobility are required. In optical models, the Drude oscillator is adopted to represent the free-electron contribution and the obtained optical mobility can be then correlated with the macroscopic material properties. However, the influence of scattering phenomena on the optical mobility depends on the considered range of photon energy. For example, the grain-boundary scattering is generally not probed by means of optical measurements and the ionized-impurity scattering contribution decreases toward higher photon energies. To understand this frequency dependence and quantify contributions from different scattering phenomena to the mobility, several case studies were analyzed in this work by means of spectroscopic ellipsometry and Fourier transform infrared (IR) spectroscopy. The obtained electrical parameters were compared to the results inferred by Hall measurements. For intrinsic ZnO (i-ZnO), the in-grain mobility was obtained by fitting reflection data with a normal Drude model in the IR range. For Al-doped ZnO (Al:ZnO), besides a normal Drude fit in the IR range, an Extended Drude fit in the UV-vis range could be used to obtain the in-grain mobility. Scattering mechanisms for a thickness series of Al:ZnO films were discerned using the more intuitive parameter “scattering frequency” instead of the parameter “mobility”. The interaction distance concept was introduced to give a physical interpretation to the frequency dependence of the scattering frequency. This physical interpretation furthermore allows the prediction of which Drude models can be used in a specific frequency range.

36 MATERIALS SCIENCE↗

Constraints on the NH3 and PH3 distributions in the Great Red Spot

Medium resolution (10 A) UV spectra were obtained for the Great Red Spot (GRS) and South Tropical Zone (STZ) of Jupiter using the low dispersion mode of the IUE spectrometers at wavelengths from 1900-2200 A. The scans were carried out to determine the coloring agent for the GRS to improve the database for developing photochemical models of the feature. The wavelengths were selected to cover the absorption features of NH3 and PH3. The resulting data were interpreted using a vertically inhomogeneous Rayleigh scattering radiative transfer model. Various NH3 concentrations were explored in an effort to fit the data, taking into account changes which would occur at different atmospheric pressure levels and due to the projected temperature fields. A forbidden NH3/forbidden H2 mixing ratio that was calculated at the 80-125 mbar pressure level in the GRS was enhanced by 3-10 percent relative to the STZ. An upper limit was obtained for the mixing ratio of PH3 in the GRS that is significantly lower than previously predicted concentrations, implying that vertical transport in the GRS is not much greater than in adjacent regions.

Wagener, R.↗

Design and Development of a Model to Simulate 0-G Treadmill Running Using the European Space Agency's Subject Loading System

Develop a model that simulates a human running in 0 G using the European Space Agency s (ESA) Subject Loading System (SLS). The model provides ground reaction forces (GRF) based on speed and pull-down forces (PDF). DESIGN The theoretical basis for the Running Model was based on a simple spring-mass model. The dynamic properties of the spring-mass model express theoretical vertical GRF (GRFv) and shear GRF in the posterior-anterior direction (GRFsh) during running gait. ADAMs VIEW software was used to build the model, which has a pelvis, thigh segment, shank segment, and a spring foot (see Figure 1).the model s movement simulates the joint kinematics of a human running at Earth gravity with the aim of generating GRF data. DEVELOPMENT & VERIFICATION ESA provided parabolic flight data of subjects running while using the SLS, for further characterization of the model s GRF. Peak GRF data were fit to a linear regression line dependent on PDF and speed. Interpolation and extrapolation of the regression equation provided a theoretical data matrix, which is used to drive the model s motion equations. Verification of the model was conducted by running the model at 4 different speeds, with each speed accounting for 3 different PDF. The model s GRF data fell within a 1-standard-deviation boundary derived from the empirical ESA data. CONCLUSION The Running Model aids in conducting various simulations (potential scenarios include a fatigued runner or a powerful runner generating high loads at a fast cadence) to determine limitations for the T2 vibration isolation system (VIS) aboard the International Space Station. This model can predict how running with the ESA SLS affects the T2 VIS and may be used for other exercise analyses in the future.

Caldwell, E. C.↗

Material Testing for Shear-Dominated Ductile Failure

An initial foray into the design of specimens that can be used to provide data about the quasistatic ductile failure of metals when subjected to shear-dominated (low triaxiality) states of stress was undertaken. Four specimen geometries made from two materials with different ductility (Al 7075, lower ductility and steel A286, higher ductility) were considered as candidates. Based on results from analysis and experimentation, it seems that two show promise for further consideration. Whereas preliminary results indicate that the Johnson-Cook model fit the failure data for Al 7075 well, it did not fit the data for steel A286. Further work is needed to consolidate the results and evaluate other failure models that may fit the steel data better, as well as to extend the results of this work to the dynamic loading regime.

36 MATERIALS SCIENCE↗

Analysis of Individual Terrestrial Gamma‐Ray Flashes With Lightning Leader Models and Fermi Gamma‐Ray Burst Monitor Data

Abstract The Gamma‐ray Burst Monitor (GBM) onboard the Fermi spacecraft has observed many tens of sufficiently bright events, which are suitable for individual analysis. In our previous study, we fit individual, bright terrestrial gamma‐ray flashes (TGFs) with Relativistic Runaway Electron Avalanche (RREA) models for the first time. For relativistic‐feedback‐based models, the TGF‐producing electrons, which are seeded internally by a positive feedback effect, are usually accelerated in a large‐scale field with fully developed RREAs. Alternatively, lightning leader models may apply to either a large‐scale thunderstorm fields with fully developed RREAs or to inhomogeneous fields in front of lightning leaders where RREAs only develop partially. The predictions of the latter, inhomogeneous models for the TGF‐beaming geometry show some differences from estimations of the relativistic feedback models in homogeneous fields. In this work, we analyze a large sample of 66 bright Fermi GBM TGFs in the framework of lightning leader models, making comparisons with previous results from the homogeneous‐field RREA models. In most cases, the spectral analysis does not strongly favor one mechanism over the other, with 59% of the TGF events being best fit with the fully developed RREA mechanism, which corresponds to high‐potential leader models. The majority of the GBM‐measured TGFs can be best fit if the source altitude is below 15 km and 70% of events best fit by leader models cannot be satisfactorily modeled unless a tilted photon beam is used. For several spectrally soft TGFs, the tilted beam low‐potential leader model can best fit the data.

Mailyan, B. G.↗

Ultimate limits to error probabilities for ionospheric models based on solar geophysical indices and how these compare with the state of the art

An ideal model based on a given set of geophysical indices is defined as a model that provides a least squares fit to the data set as a function of the indices considered. Satellite measurements of electron content for three stations at different magnetic latitudes were used to provide such data sets which were each fitted to the geophysical indices. The magnitude of the difference between the measured value and the derived equation for the data set was used to estimate the probability of making an error greater than a given magnitude for such an ideal model. Atmospheric Explorer C data is used to examine the causes of the fluctuations and suggestions are made about how real improvements can be made in ionospheric forecasting ability. Joule heating inputs in the auroral electrojets are related to the AL and AU magnetic indices. Magnetic indices based on the time integral of the energy deposited in the electrojets are proposed for modeling processes affected by auroral zone heating.

Nisbet, J. S.↗

Assessing observational constraints on dark energy

Observational constraints on time-varying dark energy (e.g., quintessence) are commonly presented on a w 0 –w a plot that assumes the equation of state of dark energy strictly satisfies w(z) = w 0 + w a z/(1 + z) as a function of the redshift z. Recent observations favor a sector of the w 0 –w a plane in which w 0 > –1 and w 0 + w a < –1, suggesting that the equation of state underwent a transition from violating the null energy condition (NEC) at large z to obeying it at small z. In this paper, we demonstrate that this impression is misleading by showing that simple quintessence models satisfying the NEC for all z predict an observational preference for the same sector. We also find that quintessence models that best fit observational data can predict a value for the dark energy equation of state at present that is significantly different from the best-fit value of w 0 obtained assuming the parameterization above. In addition, the analysis reveals an approximate degeneracy of the w 0 –w a parameterization that explains the eccentricity and orientation of the likelihood contours presented in recent observational studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Computer Modeling of Non-Isothermal Crystallization

A realistic computer model for simulating isothermal and non-isothermal phase transformations proceeding by homogeneous and heterogeneous nucleation and interface-limited growth is presented. A new treatment for particle size effects on the crystallization kinetics is developed and is incorporated into the numerical model. Time-dependent nucleation rates, size-dependent growth rates, and surface crystallization are also included. Model predictions are compared with experimental measurements of DSC/DTA peak parameters for the crystallization of lithium disilicate glass as a function of particle size, Pt doping levels, and water content. The quantitative agreement that is demonstrated indicates that the numerical model can be used to extract key kinetic data from easily obtained calorimetric data. The model can also be used to probe nucleation and growth behavior in regimes that are otherwise inaccessible. Based on a fit to data, an earlier prediction that the time-dependent nucleation rate in a DSC/DTA scan can rise above the steady-state value at a temperature higher than the peak in the steady-state rate is demonstrated.

Kelton, K. F.↗

The Future is Hera! Analyzing Astronomical Over the Internet

Hera is the data processing facility provided by the High Energy Astrophysics Science Archive Research Center (HEASARC) at the NASA Goddard Space Flight Center for analyzing astronomical data. Hera provides all the pre-installed software packages, local disk space, and computing resources need to do general processing of FITS format data files residing on the users local computer, and to do research using the publicly available data from the High ENergy Astrophysics Division. Qualified students, educators and researchers may freely use the Hera services over the internet of research and educational purposes.

Valencic, L. A.↗

A First–Principles–Based Sub–Lattice Formalism for Predicting Off–Stoichiometry in Materials for Solar Thermochemical Applications: The Example of Ceria

Theoretical models that reliably can predict off-stoichiometry in materials via accurate descriptions of underlying thermodynamics are crucial for energy applications. For example, transition-metal and rare-earth oxides that can tolerate a large number of oxygen vacancies, such as CeO 2 and doped CeO 2 , can split water and carbon dioxide via a two-step, oxide-based solar thermochemical (STC) cycle. The search for new STC materials with a performance superior to that of state-of-the-art CeO 2 can benefit from predictions accurately describing the thermodynamics of oxygen vacancies. The sub-lattice formalism, a common tool used to fit experimental data and build temperature-composition phase diagrams, can be useful in this context. Here, sub-lattice models are derived solely from zero-temperature quantum mechanics calculations to estimate fairly accurate temperature- and oxygen-partial-pressure-dependent off-stoichiometries in CeO 2 and Zr-doped CeO 2 . Physical motivations for deriving some of the “excess” sub-lattice model parameters directly from quantum mechanical calculations, instead of fitting to minimize deviations from experimental and/or theoretical data, are identified. As a result, important limitations and approximations of the approach used are specified and extensions to multi-cation oxides are also suggested to help identify novel candidates for water and carbon dioxide splitting and related applications.

08 HYDROGEN↗

Flight inspection data and crack initiation times

Lockheed C-130 service-flight inspection data is reduced by means of fracture mechanics and statistical analysis into a form from which the probability of time to crack initiation and the distribution of initial flaw sizes for various locations on the aircraft can be determined. Crack sizes are normalized by extrapolating a growing crack backwards from its first recorded size to .03 inches (crack initiation size) yielding the time to crack initiation. In a similar fashion, the crack is grown backwards to a time equal to zero to yield an initial flaw size. In order to perform the discussed computations, crack growth constants were computed for each individual location and were analyzed statistically. Statistical distributions were fitted to times to crack initiation and to initial flaw sizes in order to describe their expected behavior. Weibull and Johnson distributions have been found to fit the data reasonably well but for a better fit convolution integrals of Poisson load distributions and Weibull strength distributions are needed.

Johnson, W. S.↗

Runaway electron plateau current profile reconstruction from synchrotron imaging and Ar-II line polarization angle measurements in DIII-D

Abstract Current profile reconstructions are obtained for high current ( I p ≃ 550 kA) post-disruption runaway electron (RE) plateau plasmas in DIII-D. Two novel methods of measuring the RE current profile in high-current RE plateaus are introduced and compared: localization of the q = 2 rational surface using visible synchrotron emission (SE) imaging and the measurement of the polarization angle of line-integrated Ar-II line emission. The two methods are found to be consistent with each other within the data uncertainties. Different simulations of the RE current profile are compared with the measurements: the toroidal fluid RE model is found to best fit the data, within the measurement uncertainties. In addition to introducing two novel methods to measure the RE current profile and validating present simulation capabilities, this work demonstrates that instabilities can grow at q = 2 and q = 1 surfaces without necessarily causing a RE final loss instability. Numerical simulations are also presented to elucidate the role of these instabilities on synchrotron emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density of NaAlSi 2 O 6 Melt at High Pressure and Temperature Measured by In-Situ X-ray Microtomography

In this study, the volumetric compression of jadeite (NaAlSi 2 O 6 ) melt at high pressures was determined by three-dimensional volume imaging using the synchrotron-based X-ray microtomography technique in a rotation-anvil device. Combined with the sample mass, measured using a high-precision analytical balance prior to the high-pressure experiment, the density of jadeite melt was obtained at high pressures and high temperatures up to 4.8 GPa and 1955 K. The density data were fitted to a third-order Birch-Murnaghan equation of state, resulting in a best-fit isothermal bulk modulus K T0 of $10.8$ $^{+1.9}_{–5.3}$ GPa and its pressure derivative K' T0 of $3.4$ $^{+6.6}_{–0.4}$. Comparison with data for silicate melts of various compositions from the literature shows that alkali-rich, polymerized melts are generally more compressible than alkali-poor, depolymerized ones. The high compressibility of jadeite melt at high pressures implies that polymerized sodium aluminosilicate melts, if generated by low-degree partial melting of mantle peridotite at ~250–400 km depth in the deep upper mantle, are likely denser than surrounding mantle materials, and thus gravitationally stable.

36 MATERIALS SCIENCE↗

Distribution functions of intergalactic clouds

Width spectrum data derived from high-redshift QSO Ly-alpha absorption lines are used to study the statistical properties of intergalactic clouds. Several theoretical distribution functions for size and density are derived and tested against observational data for two types of line broadening: thermal and cosmological. Good agreement was found between the theoretical distribution functions and the observational data when the clouds were thermally broadened, and when distribution functions for both cloud size and width have a nonzero width. Attempts to fit the data with a single radius or density distribution function were unsuccessful.

Sherman, R. D.↗