SEARCH · Search NASA
Results for “Diffraction pattern”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The density of cement phases
The densities of principal crystalline phases occurring in Portland cement are critically assessed and tabulated, in some cases with addition of new data. A reliable and self-consistent density set for crystalline phases was obtained by calculating densities from crystallographic data and unit cell contents. Independent laboratory work was undertaken to synthesize major AFm and AFt cement phases, determine their unit cell parameters and compare the results with those recorded in the literature. Parameters were refined from powder diffraction patterns using CELREF 2 software. A density value is presented for each phase, showing literature sources, in some cases describing limitations on the data, and the weighting attached to numerical values where an averaging process was used for accepted data. A brief discussion is made of the consequences of the packing of water to density changes in AFm and AFt structures.
Structure electronic and ionic conductivity study versus Ca content in Ca{sub 10-x}Sr{sub x}(PO{sub 4}){sub 6}F{sub 2} apatites
Substitution effect on the crystallographic structure in Ca{sub 10-x}Sr{sub x}(PO{sub 4}){sub 6}F{sub 2} solid solution are studied by X-ray diffraction patterns and Rietveld refinements. Full potential electronic structure calculations based on LCAO (linear combination atomic orbital) are also performed using the obtained crystallographic parameters. DOS modification and the charge transfer are estimated versus the calcium content. According to the complex impedance method, ionic conductivity changes are explained.
Development of BATAN’s texture diffractometer (current status)
Texture Diffractometer, called DN2, is one of neutron diffractometers in BATAN which is dedicated for texture measurement using neutron diffraction method. To obtain better performance of the DN2, a flight tube goniometer have been installed between the monochromator and sample position. By adjusting the flight tube goniometer, defocusing effect at direct beam and background effect could be reduced significantly. Some experiments have been carried out to characterize DN2 performance. The flight tube goniometer alignment and neutron wavelength calibration were characterized using silicon standard sample Si640d. Data refinement of diffraction pattern was analyzed using MAUD software and it is obtained reliability factor with background, R{sub wpb}, reduced significantly, from 42.53 % to 19.36 % after setting of flight tube goniometer. Reliability factor without background (R{sub wp}) was reduced from 27.41% to 21.36%. Calibrated of neutron wavelengh, λ = 1,2799 Angstrom is obtained.
Coherent diffractive imaging of single layer microspheres
We report the extreme ultraviolet (XUV) coherent diffractive imaging of silica/polymer micro-particle samples illuminated by a table-top high harmonic generation source at the wavelength of 30 nm. We achieve images constructed from diffraction patterns acquired with 13 μm × 13 μm samples comprising a sparse monolayer of spherical silica and polymer micro-particles. Successful reconstructed image of an aperiodic sample using this HHG source will open the path to the realization of a compact soft x-ray microscope to investigate other complex absorbing samples.
Growth and characterization of cubic and non-cubic Ge nanocrystals
Germanium nanocrystals with tetragonal (ST-12) and diamond like cubic (Ge-I) phases have been selectively grown by controlling the ionization and electrostatic potential of Ge clusters in an ion cluster beam deposition system. Predominantly tetragonal nanocrystals were obtained when grown using neutral clusters. The percentage of cubic phase increased when grown by ionizing the clusters and accelerating them towards substrates by applying electrostatic bias in the range of 1.5 –2.5 kV. Raman spectroscopic measurement showed strong peak at 275 cm{sup −1} and 300 cm{sup −1} for tetragonal and cubic Ge nanocrystals, respectively. TEM measurements showed crystalline lattice fringes of both type of the nanocrystals. The selected area electron diffraction patterns showed (111) and (210) as the dominating lattice planes for tetragonal nanocrystals while the cubic phases had (111), (311) and (331) as the prominent lattice planes. The optical absorption edge redshifted from 1.75 to 1.55 eV as the percentage of the cubic phases increased in the NC composition in the composite film.
Panoramic Mapping of Phonon Transport from Ultrafast Electron Diffraction and Scientific Machine Learning
Abstract One central challenge in understanding phonon thermal transport is a lack of experimental tools to investigate frequency‐resolved phonon transport. Although recent advances in computation lead to frequency‐resolved information, it is hindered by unknown defects in bulk regions and at interfaces. Here, a framework that can uncover microscopic phonon transport information in heterostructures is presented, integrating state‐of‐the‐art ultrafast electron diffraction (UED) with advanced scientific machine learning (SciML). Taking advantage of the dual temporal and reciprocal‐space resolution in UED, and the ability of SciML to solve inverse problems involving coupled Boltzmann transport equations, the frequency‐dependent interfacial transmittance and frequency‐dependent relaxation times of the heterostructure from the diffraction patterns are reliably recovered. The framework is applied to experimental Au/Si UED data, and a transport pattern beyond the diffuse mismatch model is revealed, which further enables a direct reconstruction of real‐space, real‐time, frequency‐resolved phonon dynamics across the interface. The work provides a new pathway to probe interfacial phonon transport mechanisms with unprecedented details.
Microscopic modulation of mechanical properties in transparent insect wings
We report on the measurement of local friction and adhesion of transparent insect wings using an atomic force microscope cantilever down to nanometre length scales. We observe that the wing-surface is decorated with 10 μm long and 2 μm wide islands that have higher topographic height. The friction on the islands is two orders of magnitude higher than the back-ground while the adhesion on the islands is smaller. Furthermore, the high islands are decorated with ordered nano-wire-like structures while the background is full of randomly distributed granular nano-particles. Coherent optical diffraction through the wings produce a stable diffraction pattern revealing a quasi-periodic organization of the high islands over the entire wing. This suggests a long-range order in the modulation of friction and adhesion which is directly correlated with the topography. The measurements unravel novel functional design of complex wing surface and could find application in miniature biomimetic devices.
X-ray beam compression by tapered waveguides
We have fabricated linear tapered waveguide channels filled with air and imbedded in silicon for the hard x-ray regime, using a processing scheme involving e-beam lithography, reactive ion etching, and wafer bonding. Beam compression in such channels is demonstrated by coupling a pre-focused undulator beam into the channels, and recording the exit flux and far-field diffraction patterns. We achieved a compressed beam with a spot size of 16.48 nm (horizontal) × 14.6 nm (vertical) near the waveguide exit plane, as determined from the reconstructed near-field distribution, at an exit flux which is eight times higher than that of an equivalent straight channel. Simulations indicate that this gain could reach three to four orders of magnitude for longer channels with tapering in two directions.
Molecular and structural properties of polymer composites filled with activated charcoal particles
We have studied the molecular properties, structural properties, and chemical composition of composites by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) spectroscopy, and X-ray fluorescence (XRF) spectroscopy, respectively. FTIR spectra shows absorption band of hydroxyl group (-OH), methyl group (-CH{sub 3}) and aromatic group (C-C). The absorption band for aromatic group (C-C) shows the formation of carbonaceous in composites. XRF shows chemical composition of composites, which the main chemicals are SO{sub 3}, Cl, and ZnO. The loss on ignition value (LOI) of activated charcoal indicates high carbonaceous matter. The crystallite size for diffraction pattern from hydrogel polymer is about 17 nm and for activated charcoal are about 19 nm. The crystallite size of the polymer is lower than that of activated charcoal, which make possible of the particle from filler in contact with each other to form continuous conducting polymer through polymer matrix.
Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios
Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.
Self-healing of cracks in Ag joining layer for die-attachment in power devices
Sintered silver (Ag) joining has attracted significant interest in power devices modules for its ability to form stable joints with a porous interconnection layer. A function for the self-healing of cracks in sintered porous Ag interlayers at high temperatures is discovered and reported here. A crack which was prepared on a Ag joining layer was closed after heating at 200 °C in air. The tensile strength of pre-cracked Ag joining layer specimens recovers to the value of non-cracked specimens after heating treatment. Transmission electron microscopy (TEM) was used to probe the self-healing mechanism. TEM images and electron diffraction patterns show that a large quantity of Ag nanoparticles formed at the gap with the size less than 10 nm, which bridges the crack in the self-healing process. This discovery provides additional motivation for the application of Ag as an interconnection material for power devices at high temperature.
Pressure-Induced Disordering and Anomalous Lattice Expansion in La2Zr2O7 Pyrochlore
Pressure-induced cation and anion disordering in La{sub 2}Zr{sub 2}O{sub 7} pyrochlore is quantitatively analyzed by Rietveld refinement of in situ x-ray diffraction patterns, Raman, and infrared measurements. An anomalous lattice expansion and obvious change of the pressure dependence of the vibrational modes occur at {approx}10 GPa. The pressure-induced water incorporation in the La{sub 2}Zr{sub 2}O{sub 7} pyrochlore structure may be related to a previously noted photoelectrochemical effect.
Formation of nanoparticles during laser ablation of an iron target in a liquid
Formation of nanoparticles during laser ablation of a bulk iron target in water and isopropyl alcohol by pulsed near-IR laser radiation has been experimentally investigated. The experiments were performed using a 3-ns neodymium laser and a 100-ns ytterbium fibre laser. A size distribution function is obtained for the nanoparticles, which is peaking near 15 nm. The diffraction patterns of the nanoparticles exhibit pronounced peaks of metallic iron. An analysis of the nanoparticles by transmission electron microscopy shows that in some cases they have a core - shell structure. The nanoparticles formed by laser ablation have pronounced magnetic properties. The absorption spectra of colloids with iron nanoparticles contain peaks, which presumably correspond to the electron plasmon resonance in these particles.
Role of annealing temperature on cation ordering in hydrothermally prepared zinc aluminate (ZnAl2O4) spinel
Highlights: • Investigation of the structural anomaly in Zinc Aluminate Spinel/ZAS (ZnAl{sub 2}O{sub 4}) by chemically inducing the defects by annealing temperature and synthetic pressure. • Hydrothermal synthesis of ZnAl{sub 2}O{sub 4} at 240 °C from nitrate precursors. • Study of the role of annealing temperature (300–900 °C) in tuning cation ordering. • Rietveld analysis of powder X-ray diffraction patterns and Raman spectroscopy to showcase disorder-order transition in ZnAl{sub 2}O{sub 4} spinels. - Abstract: Spinels (AB{sub 2}O{sub 4}) form a niche class of ceramics, which is rich in structural (dis)ordering due to the inherent mixing between the constituent tetrahedral and octahedral sites. The cations (A and B) can form antisite defects under the influence of external parameters like pressure, temperature and nuclear irradiation. The current study reports the formation and evolution of disorder-order structural transition in hydrothermally prepared zinc aluminate spinel ZnAl{sub 2}O{sub 4}. The effect of final calcination temperature (300–900 °C for 9 h) on the degree of cation ordering has been investigated with powder X-ray diffraction, Raman and {sup 27}Al solid-state NMR spectroscopy. Rietveld refinement revealed a gradual disorder to order structural transition accompanied by lower inversion parameter (i{sub s}) and smaller lattice parameter (a) with higher calcination temperature. It was further affirmed by Raman analysis and solid-state NMR spectroscopy probing the ZnO{sub 4} and AlO{sub 4} tetrahedra in spinel. Independent of the degree of cation ordering, nanometric particle size with high surface area was observed in ZnAl{sub 2}O{sub 4} spinel.
Trivalent iron induced gelation in lambda-carrageenan
This communication reports gelation of lambda-carrageenan, for the first time, in the presence of trivalent iron ions. Kappa-, iota- and lambda-carrageenans are sulfated polysaccharides used extensively in food, pharmaceutical and medical applications. Kappa- and iota-carrageenans show gelation in the presence of mono- and di-valent ions, but lambda-carrageenan yields only viscous solutions. Our results show that gelation in lambda-carrageenan indeed is possible, but with trivalent ions. X-ray fiber diffraction patterns of iron (III)-lambda-carrageenan are characteristic of highly oriented and polycrystalline fibers containing well resolved Bragg reflections. The elastic modulus (G*) of the product is far greater than the loss modulus (G*) indicating the thermal stability of lambda-carrageenan in the presence of iron (III) ions. This novel finding has potential to expand lambda-carrageenan's current utility beyond a viscosifying agent.
Effect of pressure on heterocyclic compounds: Pyrimidine and s-triazine
We have examined the high-pressure behaviors of six-membered heterocyclic compounds of pyrimidine and s-triazine up to 26 and 26.5 GPa, respectively. Pyrimidine crystallizes in Pna2{sub 1} symmetry (phase I) with the freezing pressure of 0.3 GPa, and transforms to another phase (phase II) at 1.1 GPa. Raman spectra of several compression-decompression cycles demonstrate there is a critical pressure of 15.5 GPa for pyrimidine. Pyrimidine returns back to its original liquid state as long as the highest pressure is below 15.1 GPa. Rupture of the aromatic ring is observed once pressure exceeds 15.5 GPa during a compression-decompression cycle, evidenced by the amorphous characteristics of the recovered sample. As for s-triazine, the phase transition from R-3c to C2/c is well reproduced at 0.6 GPa, in comparison with previous Raman data. Detailed Raman scattering experiments corroborate the critical pressure for s-triazine may locate at 14.5 GPa. That is, the compression is reversible below 14.3 GPa, whereas chemical reaction with ring opening is detected when the final pressure is above 14.5 GPa. During compression, the complete amorphization pressure for pyrimidine and s-triazine is identified as 22.4 and 15.2 GPa, respectively, based on disappearance of Raman lattice modes. Synchrotron X-ray diffraction patterns and Fourier transform infrared spectra of recovered samples indicate the products in two cases comprise of extended nitrogen-rich amorphous hydrogenated carbon (a-C:H:N)
Transmission electron microscopy studying of structural features of NiTi B2 phase formed under pulsed electron-beam impact
By transmission electron microscopy method the evolution of structural-phase states on a depth of close to equiatomic NiTi modified layer has been studied. Modification performed by pulse impact on its surface low-energy high-current electron beam (beam energy density 10 J/sm{sup 2}, 10 pulses, pulse duration 50mks). It is established that during the treatment in the layer thickness of 8–10 μm, the melting of primary B2 phase and contained therein as Ti2Ni phase particles occurs. The result is change in the concentration ratio of titanium and nickel in the direction of increasing titanium content, which was confirmed by X-ray analysis in the form of increased unit cell parameter B2 phase. Analysis of the electron diffraction pattern showed that the modified layer is characterized as a highly distorted structure on the basis of bcc lattice. Lattice distortions are maximal near the surface and extends to a depth of melt. In subjacent layer there is gradual decline lattice distortions is observed.