SEARCH · Search NASA

Results for “Direct Entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Subsonic Aircraft With Regression and Neural-Network Approximators Designed

At the NASA Glenn Research Center, NASA Langley Research Center's Flight Optimization System (FLOPS) and the design optimization testbed COMETBOARDS with regression and neural-network-analysis approximators have been coupled to obtain a preliminary aircraft design methodology. For a subsonic aircraft, the optimal design, that is the airframe-engine combination, is obtained by the simulation. The aircraft is powered by two high-bypass-ratio engines with a nominal thrust of about 35,000 lbf. It is to carry 150 passengers at a cruise speed of Mach 0.8 over a range of 3000 n mi and to operate on a 6000-ft runway. The aircraft design utilized a neural network and a regression-approximations-based analysis tool, along with a multioptimizer cascade algorithm that uses sequential linear programming, sequential quadratic programming, the method of feasible directions, and then sequential quadratic programming again. Optimal aircraft weight versus the number of design iterations is shown. The central processing unit (CPU) time to solution is given. It is shown that the regression-method-based analyzer exhibited a smoother convergence pattern than the FLOPS code. The optimum weight obtained by the approximation technique and the FLOPS code differed by 1.3 percent. Prediction by the approximation technique exhibited no error for the aircraft wing area and turbine entry temperature, whereas it was within 2 percent for most other parameters. Cascade strategy was required by FLOPS as well as the approximators. The regression method had a tendency to hug the data points, whereas the neural network exhibited a propensity to follow a mean path. The performance of the neural network and regression methods was considered adequate. It was at about the same level for small, standard, and large models with redundancy ratios (defined as the number of input-output pairs to the number of unknown coefficients) of 14, 28, and 57, respectively. In an SGI octane workstation (Silicon Graphics, Inc., Mountainview, CA), the regression training required a fraction of a CPU second, whereas neural network training was between 1 and 9 min, as given. For a single analysis cycle, the 3-sec CPU time required by the FLOPS code was reduced to milliseconds by the approximators. For design calculations, the time with the FLOPS code was 34 min. It was reduced to 2 sec with the regression method and to 4 min by the neural network technique. The performance of the regression and neural network methods was found to be satisfactory for the analysis and design optimization of the subsonic aircraft.

Patnaik, Surya N.↗

NASA NTRS2011

Axisymmetric Implementation for 3D-Based DSMC Codes

The primary objective in developing NASA s DSMC Analysis Code (DAC) was to provide a high fidelity modeling tool for 3D rarefied flows such as vacuum plume impingement and hypersonic re-entry flows [1]. The initial implementation has been expanded over time to offer other capabilities including a novel axisymmetric implementation. Because of the inherently 3D nature of DAC, this axisymmetric implementation uses a 3D Cartesian domain and 3D surfaces. Molecules are moved in all three dimensions but their movements are limited by physical walls to a small wedge centered on the plane of symmetry (Figure 1). Unfortunately, far from the axis of symmetry, the cell size in the direction perpendicular to the plane of symmetry (the Z-direction) may become large compared to the flow mean free path. This frequently results in inaccuracies in these regions of the domain. A new axisymmetric implementation is presented which aims to solve this issue by using Bird s approach for the molecular movement while preserving the 3D nature of the DAC software [2]. First, the computational domain is similar to that previously used such that a wedge must still be used to define the inflow surface and solid walls within the domain. As before molecules are created inside the inflow wedge triangles but they are now rotated back to the symmetry plane. During the move step, molecules are moved in 3D but instead of interacting with the wedge walls, the molecules are rotated back to the plane of symmetry at the end of the move step. This new implementation was tested for multiple flows over axisymmetric shapes, including a sphere, a cone, a double cone and a hollow cylinder. Comparisons to previous DSMC solutions and experiments, when available, are made.

Stewart, Benedicte↗

DOE OSTI2021

Evaluating the benefits of kinetic Monte Carlo and microkinetic modeling for catalyst design studies in the presence of lateral interactions

Popular computational catalyst design strategies rely on the identification of reactivity descriptors, which can be used along with Brønsted–Evans–Polanyi (BEP) and scaling relations as input to a microkinetic model (MKM) to make predictions for activity or selectivity trends. The main benefit of this approach is related to the inherent dimensionality reduction of the large material space to just a few catalyst descriptors. Conversely, it is well documented that a small set of descriptors is insufficient to capture the intricacies and complexities of a real catalytic system. The inclusion of coverage effects through lateral adsorbate-adsorbate interactions can narrow the gap between simplified descriptor predictions and real systems, but mean-field MKMs cannot properly account for local coverage effects. This shortcoming of the mean-field approximation can be rectified by switching to a lattice-based kinetic Monte Carlo (kMC) method using cluster expansion representation of adsorbate–adsorbate lateral interactions. Using the prototypical CO oxidation reaction as an example, we critically evaluate the benefits of kMC over MKM in terms of trend predictions and computational cost when using only a small set of input parameters. After confirming that in the absence of lateral interactions the kMC and MKM approaches yield identical trends and mechanistic information, we observed substantial differences between the two kinetic models when lateral interactions were introduced. Here, the mean-field implementation applies coverage corrections directly to the descriptors, causing an artificial overprediction of the activity of strongly binding metals. In contrast, the cluster expansion in kMC implementation can differentiate among the highly active metals but it is very sensitive to the set of included interaction parameters. Considering that computational screening relies on a minimal set of descriptors, for which MKM makes reasonable trend predictions at a ca. three orders of magnitude lower computational cost than kMC, the MKM approach does provide a better entry point for computational catalyst design.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Monte Carlo Hauser-Feshbach computer code system to model nuclear reactions: YAHFC

A computer program framework, YAHFC, to model low-energy nuclear reactions is presented. The framework allows for reactions with incident particles ranging from protons/neutrons to alphas and is designed to address reactions that ultimately lead to the formation of compound nuclear systems that then decay statistically as outlined in concepts of Hauser and Feshbach. Additionally, instead of a reaction, it is also possible to model the decay of a nuclear system with an initial excitation and population. The code models nuclear decays with a Monte Carlo process that tracks the decay of each state. This allows for an exact representation of the spectra for all emitted particles in each of the final exit channels and the possibility of generating reaction data for simulation purposes. The program is interfaced with the optical model code system FRESCOX to calculate transmission coefficients as well as the effects of coupled channels and other direct excitations via the distorted wave Born approximation (DWBA). Modules are included to account for nuclear processes such as width corrections, pre-equilibrium emission, and fission. The program is controlled by a series of input commands and while a set of input parameters exists for each projectile and target, the input commands allow for complete control over each input parameter. Extensive data files are produced and a program is provided that converts YAHFC data files into nuclear data library entries in the generalized nuclear data structure (GNDS).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1974

Flutter of panels on discrete flexible supports

The supersonic flutter of wide panels on discrete flexible supports is investigated for three different panel-support configurations. The first study examines the effect of support stiffness on the flutter behavior of a specific five-support configuration with leading-and trailing-edge overhangs; this configuration was recently under consideration for a heat shield on an entry body. The second study investigates the effect of support stiffness on flutter of panels with various numbers of equally spaced supports. The third study examines the effect of center-support location on the flutter of panels with three supports. Results are presented in nondimensional form. The analysis is based on wide-plate structural theory and Ackeret aerodynamics. Finite differences are employed to obtain solutions for flutter pressure. A computer program based on this analysis and including a direct solution technique is presented. The program can be used to find the flutter pressure of wide panels of variable thickness supported by any number of flexible supports.

Stein, M.↗

NASA NTRS2001

Predictor-Corrector Entry Guidance for Reusable Launch Vehicles

An online entry guidance algorithm has been developed using a predictor-corrector approach. The algorithm is designed for the Reusable Launch Vehicle (RLV) and is demonstrated by using, the X-33 model. The objective of the design is to handle widely dispersed entry conditions and deliver the vehicle at the Terminal Area Energy Management (TAEM) interface box within an acceptable tolerance and without violating any of the vehicle physical constraints. Combination of several control variables is used in testing the performance and computational requirement of the algorithm. The control variables are the bank angle, angle-of-attack and the time for roll reversal. The bank angle and angle-of-attack profiles are the nominal profiles plus the perturbations in each direction. The initial guess of the bank profile is a 45 degrees bank angle with reversal at 360 seconds from liftoff. A six-element state vector is propagated to the TAEM interface box through the integration of the equations of motion (EOM). Altitude, heading and range errors are computed between the desired and the achieved state at the TAEM interface. These errors are used to correct the initial guess of the control variables. This process is repeated until the errors meet an acceptable level at the TAEM interface. Several numerical optimization methods are used to evaluate the convergent property of the predictor-predictor methodology. Successful results are demonstrated using the X-33 model.

Youssef, Hussein↗

NASA NTRS2017

Minimum dV for Targeted Spacecraft Disposal

The density scale height of the Earth's atmosphere undergoes significant reduction in the final phases of a natural decay. It can be shown that for most realistic ballistic numbers, it is possible to exploit this effect to amplify available spacecraft dV by using it at the penultimate perigee to penetrate into higher drag regions at final apogee. The drag at this lower pass can more effectively propel a spacecraft towards the final target region than applying the same dV direct Hohmann transfer at that final apogee. This study analyzes the potential use of this effect-- in combination with small phasing burns--to calculate the absolute minimum delta-V that would be required to reliably guide a spacecraft to any specified safe unoccupied ocean region as a function of ballistic number, orbit inclination, and initial eccentricity. This calculation is made for controllable spacecraft in several orbit inclinations and eccentricities with arbitrary initial LAN and ArgP one week before final entry, under three-sigma atmospheric perturbations. The study analyzes the dV required under varying levels of final controllable altitude at which dV may be imparted, and various definitions of the length and location of a "safe" disposal area. The goal of such research is to improve public safety by creating assured safe disposal strategies for low-dV and/or low-thrust spacecraft that under more traditional strategies would need to be abandoned to a fully random decay.

Bacon, John↗

NASA NTRS2013

Comparison of Failure Modes in 2-D and 3-D Woven Carbon Phenolic Systems

NASA Ames Research Center is developing Woven Thermal Protection System (WTPS) materials as a new class of heatshields for entry vehicles (Stackpoole). Currently, there are few options for ablative entry heatshield materials, none of which is ideally suited to the planetary probe missions currently of interest to NASA. While carbon phenolic was successfully used for the missions Pioneer Venus and Galileo (to Jupiter), the heritage constituents are no longer available. An alternate carbon phenolic would need to be qualified for probe missions, which is most efficient at heat fluxes greater than those currently of interest. Additional TPS materials such as Avcoat and PICA are not sufficiently robust for the heat fluxes required. As a result, there is a large TPS gap between the materials efficient at very high conditions (carbon phenolic) and those that are effective at low-moderate conditions (all others). Development of 3D Woven TPS is intended to fill this gap, targeting mid-density weaves that could with withstand mid-range heat fluxes between 1100 W/sq cm and 8000 W/sq cm (Venkatapathy (2012). Preliminary experimental studies have been performed to show the feasibility of WTPS as a future mid-range TPS material. One study performed in the mARC Jet Facility at NASA Ames Research Center characterized the performance of a 3D Woven TPS sample and compared it to 2D carbon phenolic samples at ply angles of 0deg, 23.5deg, and 90deg. Each sample contained similar compositions of phenolic and carbon fiber volume fractions for experimental consistency. The goal of this study was to compare the performance of the TPS materials by evaluating resulting recession and failure modes. After exposing both samples to similar heat flux and pressure conditions, the 2D carbon phenolic laminate was shown to experience significant delamination between layers and further pocketing underneath separated layers. The 3D Woven TPS sample did not experience the delamination or pocketing failure modes because z-fibers in the through-thickness direction provided extra reinforcement to hold material layers together. Therefore, the benefit of using a 3D weave architecture was shown to alleviate failure modes experienced by a 2D laminate sample of similar material composition. In summary this poster reviews the thermal response performance comparisons drawn between a 3D Woven TPS sample and 2D Carbon Phenolic samples after performing rigorous heating experiments in the mARC facility at NASA Ames. Although the mARC Facility is still in its developmental stages, researchers expect similar trends in failure modes observed from large scale arc jet facilities. This work helps demonstrate the viability of 3D Woven TPSs as a new TPS option for future atmospheric entry missions.

Rossman, Grant A.↗

NASA NTRSDate not supplied

The State of Cryptolib – The Open-Source Satellite Cryptography Library

What state would the world be in if all internet traffic was unencrypted? Imagine an alternate universe where you can plug a packet sniffing device into your home internet and capture the web traffic of the entire world. It seems obvious that this scenario is less than desirable. If we would not allow this for the internet, why would we allow this in the space domain? With the advent of open-source ground stations, commercial off the shelf hardware, and ground stations as a service, the barrier to entry for space communications is rapidly lowering. New players enter the space realm everydayevery day, and the presence of tools to allow apprentice evildoers the ability to exploit satellite communications is on the horizon. Not only are legacy missions at risk, but future missions are as well - particularly lower budget science missions with more stringent sciencesize, weight, and power constraints. that may find it difficult to utilize hardware-based encryption solutions. In terms of Civilian Aerospace, NASA Standard 1006 generally directs that missions "shall protect the command stack with encryption that meets or exceeds Federal Information Processing Standards (FIPS) 140". Fortunately, the Consultative Committee for Space Data Systems (CCSDS) has published an international standard on Space Data Link Security. The combination of these two forces has resulted in CryptoLib - an open-source, C-based, encryption library that aims to be CCSDS SDLS compliant. CryptoLib is designed to support smaller missions on a tight budget that may be subject to the more stringent command link encryption requirements. Additionally, CryptoLib serves as an underpinning in JPL's Key Management & Cryptography (KMC) suite and is also designed to function as a 'drop-in' for smaller missions. CryptoLib is in active development and currently provides Telecommand (TC), Telemetry (TM), and Advanced Orbiting Systems (AOS) encryption and decryption capabilities with a variety of encryption and authentication schemes. This presentation will report the latest features, current status, and future plans for CryptoLib.

open-source encryption↗

NASA NTRSDate not supplied

The State of CryptoLib – The Open-Source Satellite Cryptography Library

open-source encryption↗

DOE OSTI2024

Bacterial vampirism mediated through taxis to serum

Bacteria of the family Enterobacteriaceae are associated with gastrointestinal (GI) bleeding and bacteremia and are a leading cause of death, from sepsis, for individuals with inflammatory bowel diseases. The bacterial behaviors and mechanisms underlying why these bacteria are prone to bloodstream entry remain poorly understood. Herein, we report that clinical isolates of non-typhoidal Salmonella enterica serovars, Escherichia coli , and Citrobacter koseri are rapidly attracted toward sources of human serum. To simulate GI bleeding, we utilized an injection-based microfluidics device and found that femtoliter volumes of human serum are sufficient to induce bacterial attraction to the serum source. This response is orchestrated through chemotaxis and the chemoattractant L-serine, an amino acid abundant in serum that is recognized through direct binding by the chemoreceptor Tsr. We report the first crystal structures of Salmonella Typhimurium Tsr in complex with L-serine and identify a conserved amino acid recognition motif for L-serine shared among Tsr orthologues. We find Tsr to be widely conserved among Enterobacteriaceae and numerous World Health Organization priority pathogens associated with bloodstream infections. Lastly, we find that Enterobacteriaceae use human serum as a source of nutrients for growth and that chemotaxis and the chemoreceptor Tsr provide a competitive advantage for migration into enterohemorrhagic lesions. We define this bacterial behavior of taxis toward serum, colonization of hemorrhagic lesions, and the consumption of serum nutrients as ‘bacterial vampirism’, which may relate to the proclivity of Enterobacteriaceae for bloodstream infections.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1973

System design of the Pioneer Venus spacecraft. Volume 8: Command/data handling subsystems studies

Study tasks for the command and data handling subsystems have been directed to: (1) determining ground data systems, (GDS) interfaces and deep space network (DSN) changes, if required, (2) defining subsystem requirements, (3) surveying existing hardware that could be used or modified to meet subsystem requirements, and (4) establishing a baseline design. Study of the existing GDS led to the conclusion that the Viking configuration GDS can be used with only minor changes required for the Pioneer Venus baseline. Those changes required are associated with providing a predetection recording capability used during probe entry and descent. Subsystem requirements were first formulated with sufficient latitude so that surveys of existing hardware could lead to low cost hardware which, in turn, could modify more narrowly defined subsystem requirements.

Vesely, D. D.↗

NASA NTRS2000

NASA Participation in the ISAS MUSES C Asteroid Sample Return Mission

NASA and Japan's Institute of Space and Astronautical Science (ISAS) have agreed to cooperate on the first mission to collect samples from the surface of an asteroid and return them to Earth for in-depth study. The MUSES-C mission will be launched on a Japanese MV launch vehicle in January 2002 from Kagoshima Space Center, Japan, toward a touchdown on the asteroid Nereus in September 2003. A NASA-provided miniature rover will conduct in-situ measurements on the surface. The asteroid samples will be returned to Earth by MUSES-C via a parachute-borne recovery capsule in January 2006. NASA and ISAS will cooperate on several aspects of the mission, including mission support and scientific analysis. In addition to providing the rover, NASA will arrange for the testing of the MUSES-C re-entry heat shield at NASA/Ames Research Center, provide supplemental Deep Space Network tracking of the spacecraft, assist in navigating the spacecraft and provide arrangements for the recovery of the sample capsule at a landing site in the U. S. Scientific coinvestigators from the U.S. and Japan will share data from the instruments on the rover and the spacecraft. They will also collaborate on the investigations of the returned samples. With a mass of about I kg, the rover experiment will be a direct descendant of the technology used to build the Sojourner rover. The rover will carry three science instruments: a visible imaging camera, a near-infrared point spectrometer and an alpha X ray spectrometer. The solarpowered rover will move around the surface of Nereus collecting imagery data which are complimentary to the spacecraft investigation. The imaging system will be capable of making surface texture, composition, and morphology measurements at resolutions better than 1 cm. The rover will transmit this data to the spacecraft for relay back to Earth. Due to the microgravity environment on Nereus, the rover has been designed to right itself in case it flips over. Solar panels on all sides of the rover will ensure that enough power will always be available to the rover to activate the motors needed to turn over. Posable struts will allow the rover to position its chassis such that the camera can be pointed straight down at the surface or straight up at the sky. The presentation will describe the mission, scientific objectives and current state of the rover in detail.

Jones, Ross↗

DOE OSTI2023

Unifying principles for catalytic hydrotreating processes (Final Technical Report)

This project builds on the hypothesis that the hydrotreating processes for the removal of oxygen and sulfur are fundamentally similar at the atomic-scale and existing knowledge from the treatment of petroleum derived feedstock can be leveraged for the design of novel catalysts for the upgrade of bio-oil. We tested this hypothesis by comparing computed potential energy diagrams for hydrodesulfurization (HDS) of thiophene over MoS 2 with hydrodeoxygenation (HDO) of furan over MoO 3 and concluded that certain aspects, such as catalyst promotion with transition metals, are valid strategies for both reactions. On the other hand, we also noticed significant differences in the mechanism for hydrogen (H 2 ) activation, which requires sites with metallic character. While MoS 2 is known to have metallic edge states that can catalyze H 2 dissociation, this elementary step is prohibitively slow on defect-free oxides. Only in the presence of vacancies or by creating metal/oxide interfaces can efficient H 2 activation sites during HDO be formed. The need for bifunctional catalyst when it comes to efficient and selective HDO or dehydrogenation reactions was further corroborated in joint experimental and theoretical studies of the Guerbet reaction for the coupling of biomass derived oxygenates over PdCu alloys, nitrate reduction over In-promoted Pd nanoparticles, and ethylene dehydroaromatization over Ga-exchanged ZSM-5 zeolites. All of these catalytic systems have in common that catalytic sites with distinct functional requirements are needed to create a working catalyst. Detailed computational studies were carried out for HDO of m -cresol and phenol on Ru-modified TiO 2 surfaces, which allowed us to attribute catalytic activity to the metal/oxide interface. A surprising finding was that heterolytic cleavage of the H-H bond across the Ru/TiO 2 interface was critically important, despite lower barriers for homolytic H 2 activation on Ru metal. The explanation lies in the high barriers for hydrogen spillover from Ru to TiO 2 , which becomes unnecessary in the heterolytic activation pathway. Moreover, we also reported that proton transfer steps between metal and oxide sites are mediated by weakly adsorbed surface water. During attempts to develop and validate a kinetic Monte Carlo (kMC) model for HDO reactions at the Ru/TiO 2 interface, it became clear that lateral interactions are paramount to describe realistic surface chemistry and without these interactions, the reduction and hydroxylation behavior from our simulations was inconsistent with reported experiments. To assess the importance of lateral interactions in popular computational catalyst design strategies relying on the identification of reactivity descriptors, which can be used along with Brønsted–Evans–Polanyi (BEP) and scaling relations as input to a microkinetic model (MKM) to make predictions for activity or selectivity trends, we compared predicted trends with those obtained from descriptor-based kMC models. We critically evaluated the benefits of kMC over MKM in terms of trend predictions and computational cost when using only a small set of input parameters. After confirming that in the absence of lateral interactions the kMC and MKM approaches yield identical trends and mechanistic information, we observed substantial differences between the two kinetic models when lateral interactions were introduced. The mean-field implementation applies coverage corrections directly to the descriptors, causing an artificial overprediction of the activity of strongly binding metals. In contrast, the cluster expansion in kMC implementation can differentiate among the highly active metals but it is very sensitive to the set of included interaction parameters. Considering that computational screening relies on a minimal set of descriptors, for which MKM makes reasonable trend predictions at a ca. three orders of magnitude lower computational cost than kMC, we concluded that the MKM approach does provide an overall better entry point for computational catalyst design. Overall, this project has led to 11 peer-reviewed publications, and their scientific is impact is well illustrated by their combined 702 citations.

08 HYDROGEN↗

NASA NTRS2011

Orion Flight Test-1 Thermal Protection System Instrumentation

The Orion Crew Exploration Vehicle (CEV) was originally under development to provide crew transport to the International Space Station after the retirement of the Space Shuttle, and to provide a means for the eventual return of astronauts to the Moon. With the current changes in the future direction of the United States human exploration programs, the focus of the Orion project has shifted to the project s first orbital flight test, designated Orion Flight Test 1 (OFT-1). The OFT-1 is currently planned for launch in July 2013 and will demonstrate the Orion vehicle s capability for performing missions in low Earth orbit (LEO), as well as extensibility beyond LEO for select, critical areas. Among the key flight test objectives are those related to validation of the re-entry aerodynamic and aerothermal environments, and the performance of the thermal protection system (TPS) when exposed to these environments. A specific flight test trajectory has been selected to provide a high energy entry beyond that which would be experienced during a typical low Earth orbit return, given the constraints imposed by the possible launch vehicles. This trajectory resulted from a trade study that considered the relative benefit of conflicting objectives from multiple subsystems, and sought to provide the maximum integrated benefit to the re-entry state-of-the-art. In particular, the trajectory was designed to provide: a significant, measureable radiative heat flux to the windward surface; data on boundary transition from laminar to turbulent flow; and data on catalytic heating overshoot on non-ablating TPS. In order to obtain the necessary flight test data during OFT-1, the vehicle will need to have an adequate quantity of instrumentation. A collection of instrumentation is being developed for integration in the OFT-1 TPS. In part, this instrumentation builds upon the work performed for the Mars Science Laboratory Entry, Descent and Landing Instrument (MEDLI) suite to instrument the OFT-1 ablative heat shield. The MEDLI integrated sensor plugs and pressure sensors will be adapted for compatibility with the Orion TPS design. The sensor plugs will provide in-depth temperature data to support aerothermal and TPS model correlation, and the pressure sensors will provide a flush air data system for validation of the entry and descent aerodynamic environments. In addition, a radiometer design will be matured to measure the radiative component of the reentry heating at two locations on the heat shield. For the back shell, surface thermocouple and pressure port designs will be developed and applied which build upon the heritage of the Space Shuttle Program for instrumentation of reusable surface insulation (RSI) tiles. The quantity and location of the sensors has been determined to balance the needs of the reentry disciplines with the demands of the hardware development, manufacturing and integration. Measurements which provided low relative value and presented significant engineering development effort were, unfortunately, eliminated. The final TPS instrumentation has been optimized to target priority test objectives. The data obtained will serve to provide a better understanding of reentry environments for the Orion capsule design, reduce margins, and potentially reduce TPS mass or provide TPS extensibility for alternative missions.

Kowal, T. John↗

NASA NTRS2017

Kinetic Damage from Meteorites

A Near Earth object impacting into Earth's atmosphere may produce damaging effects at the surface due to airblast, thermal pulse, or kinetic impact in the form of meteorites. At large sizes (greater than many tens of meters), the damage is amplified by the hypersonic impact of these large projectiles moving with cosmic velocity, leaving explosively produced craters. However, much more common is simple "kinetic" damage caused by the impact of smaller meteorites moving at terminal speeds. As of this date a handful of instances are definitively known of people or structures being directly hit and/or damaged by the kinetic impact of meteorites. Meteorites known to have struck humans include the Sylacauga, Alabama fall (1954) and the Mbale meteorite fall (1992). Much more common is kinetic meteorite damage to cars, buildings, and even a post box (Claxton, Georgia - 1984). Historical accounts indicate that direct kinetic damage by meteorites may be more common than recent accounts suggest (Yau et al., 1994). In this talk we will examine the contemporary meteorite flux and estimate the frequency of kinetic damage to various structures, as well as how the meteorite flux might affect the rate of human casualties. This will update an earlier study by Halliday et al (1985), adding variations expected in meteorite flux with latitude (Le Feuvre and Wieczorek, 2008) and validating these model predictions of speed and entry angle with observations from the NASA and SOMN fireball networks. In particular, we explore the physical characteristics of bright meteors which may be used as a diagnostic for estimating which fireballs produce meteorites and hence how early warning of such kinetic damage may be estimated in advance through observations and modeling.

Cooke, William↗

NASA NTRS2017

Kinetic Damage from Meteorites

A Near Earth object impacting into Earth's atmosphere may produce damaging effects at the surface due to airblast, thermal pulse, or kinetic impact in the form of meteorites. At large sizes (>many tens of meters), the damage is amplified by the hypersonic impact of these large projectiles moving with cosmic velocity, leaving explosively produced craters. However, much more common is simple "kinetic" damage caused by the impact of smaller meteorites moving at terminal speeds. As of this date a handful of instances are definitively known of people or structures being directly hit and/or damaged by the kinetic impact of meteorites. Meteorites known to have struck humans include the Sylacauga, Alabama fall (1954) and the Mbale meteorite fall (1992). Much more common is kinetic meteorite damage to cars, buildings, and even a post box (Claxton, Georgia - 1984). Historical accounts indicate that direct kinetic damage by meteorites may be more common than recent accounts suggest (Yau et al., 1994). In this talk we will examine the contemporary meteorite flux and estimate the frequency of kinetic damage to various structures, as well as how the meteorite flux might affect the rate of human casualties. This will update an earlier study by Halliday et al (1985), adding variations expected in meteorite flux with latitude (Le Feuvre and Wieczorek, 2008) and validating these model predictions of speed and entry angle with observations from the NASA and SOMN fireball networks. In particular, we explore the physical characteristics of bright meteors which may be used as a diagnostic for estimating which fireballs produce meteorites and hence how early warning of such kinetic damage may be estimated in advance through observations and modelling.

Cooke, William↗

DOE OSTI2019

Measurement and Analysis of the Extreme Physical Shock Environment Experienced by Crane-Mounted Radiation Detection Systems

At ports of entry, radiation detectors could be mounted on container gantry crane spreaders to monitor cargo containers entering and leaving the country. These detectors would have to withstand the extreme physical conditions experienced by these spreaders during normal operations. Physical shock data from the gable ends of a spreader were recorded during the loading and unloading of a cargo ship by twohard mounted PCB Piezotronics model 340A50 accelerometers and two Lansmont SAVER 9X30 units(with padding). The majority of large shocks were observed in the vertical direction. The Lansmont units recorded mean shocks of 22.215 ±1.174and 23.776 ±1.140g, while the PCB accelerometers recorded mean shocks of 31.608 ±1.798and 37.072 ±2.015g in this direction. Maximum shocks were as high as 118.854 g. A scatter plot of observed peak acceleration versus velocity change is presented to allow comparison with the damage boundary curve for any planned instrumentation for future systems. Furthermore, it is hoped that the results of this research will aid in the design of future crane-mounted systems.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗