Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct current system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

A comparison of anisotropic and isotropic grain growth simulation results of Uranium dioxide and Copper

Grain boundaries migrate to reduce the total grain boundary energy in a material. However, grain boundary energy is anisotropic, such that some grain boundaries are less energy favorable in the system and tend to disappear. Idaho National Laboratory’s (INL) mesoscale fuel performance code MARMOT currently assumes isotropic (non-directionally dependent) grain boundary energy in all phase field sim- ulations of grain boundary migration. As a preliminary step to incorporating fully anisotropic grain boundary energies into MARMOT, a comparison of the results of grain growth simulations for UO 2 nuclear fuels utilizing the old isotropic MARMOT code and new code incorporating anisotropic grain boundary energies was performed. Comparisons of Copper simulations were also performed. The re- sults analyzed were from simple circle and thumb-shaped grain test cases, and polycrystalline systems using artificially generated initial conditions. The metrics used to compare the grains from isotropic and anisotropic cases include grain area and average grain boundary energy. Anisotropic behavior was observed in the systems of circle and thumb-shaped grains. Polycrystalline systems do not behave as expected, suggesting missing terms in the equation implemented in MARMOT which governs the mi- crostructural evolution of the grain boundaries.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A comparative technoeconomic analysis of renewable hydrogen production using solar energy

A technoeconomic analysis of photoelectrochemical (PEC) and photovoltaic-electrolytic (PV-E) solar-hydrogen production of 10 000 kg H 2 day -1 (3.65 kilotons per year) was performed to assess the economics of each technology, and to provide a basis for comparison between these technologies as well as within the broader energy landscape. Two PEC systems, differentiated primarily by the extent of solar concentration (unconcentrated and 10× concentrated) and two PV-E systems, differentiated by the degree of grid connectivity (unconnected and grid supplemented), were analyzed. In each case, a base-case system that used established designs and materials was compared to prospective systems that might be envisioned and developed in the future with the goal of achieving substantially lower overall system costs. With identical overall plant efficiencies of 9.8%, the unconcentrated PEC and non-grid connected PV-E system base-case capital expenses for the rated capacity of 3.65 kilotons H 2 per year were 205 dollars MM (293 dollars per m 2 of solar collection area (m S -2 ), 14.7 W H2,P -1 ) and 260 dollars MM ($371 m S -2 , 18.8 dollars W H2,P -1 ), respectively. The untaxed, plant-gate levelized costs for the hydrogen product (LCH) were $11.4 kg -1 and 12.1 dollars kg -1 for the base-case PEC and PV-E systems, respectively. The 10× concentrated PEC base-case system capital cost was 160 dollars MM (428 dollars m S -2 , 11.5 dollars W H2,P -1 ) and for an efficiency of 20% the LCH was 9.2 kg -1 . Likewise, the grid supplemented base-case PV-E system capital cost was 66 dollars MM (441 dollars m S -2 , 11.5 dollars W H2,P -1 ), and with solar-to-hydrogen and grid electrolysis system efficiencies of 9.8% and 61%, respectively, the LCH was 6.1 dollars kg -1 . As a benchmark, a proton-exchange membrane (PEM) based grid-connected electrolysis system was analyzed. Assuming a system efficiency of 61% and a grid electricity cost of $0.07 kWh -1 , the LCH was $5.5 kg -1 . A sensitivity analysis indicated that, relative to the base-case, increases in the system efficiency could effect the greatest cost reductions for all systems, due to the areal dependencies of many of the components. The balance-of-systems (BoS) costs were the largest factor in differentiating the PEC and PV-E systems. No single or combination of technical advancements based on currently demonstrated technology can provide sufficient cost reductions to allow solar hydrogen to directly compete on a levelized cost basis with hydrogen produced from fossil energy. Specifically, a cost of CO 2 greater than ~$800 dollars (ton CO 2 ) -1 was estimated to be necessary for base-case PEC hydrogen to reach price parity with hydrogen derived from steam reforming of methane priced at $12 GJ -1 ($1.39 (kg H 2 ) -1 ). A comparison with low CO 2 and CO 2 -neutral energy sources indicated that base-case PEC hydrogen is not currently cost-competitive with electrolysis using electricity supplied by nuclear power or from fossil-fuels in conjunction with carbon capture and storage. Solar electricity production and storage using either batteries or PEC hydrogen technologies are currently an order of magnitude greater in cost than electricity prices with no clear advantage to either battery or hydrogen storage as of yet. Significant advances in PEC technology performance and system cost reductions are necessary to enable cost-effective PEC-derived solar hydrogen for use in scalable grid-storage applications as well as for use as a chemical feedstock precursor to CO 2 -neutral high energy-density transportation fuels. Hence such applications are an opportunity for foundational research to contribute to the development of disruptive approaches to solar fuels generation systems that can offer higher performance at much lower cost than is provided by current embodiments of solar fuels generators. Efforts to directly reduce CO 2 photoelectrochemically or electrochemically could potentially produce products with higher value than hydrogen, but many, as yet unmet, challenges include catalytic efficiency and selectivity, and CO 2 mass transport rates and feedstock cost. Major breakthroughs are required to obtain viable economic costs for solar hydrogen production, but the barriers to achieve cost-competitiveness with existing large-scale thermochemical processes for CO 2 reduction are even greater.

14 SOLAR ENERGY↗

Production and diffusion of H 2 O 2 during the interaction of a direct current pulsed atmospheric pressure plasma jet on a hydrogel

The interaction of cold atmospheric pressure plasma jets with hydrogels has been used as a model system to study the interaction of plasmas with tissues. In this study, we analyze the diffusion of reactive oxygen species (in particular H 2 O 2 ) and quantify the amount of plasma-produced H 2 O 2 species that penetrates into a gelatin hydrogel. We show that the diffusion constant of H 2 O 2 in 10% gelatin hydrogel is similar to its diffusion constant in water and that the production of H 2 O 2 in the hydrogel is significantly less than the production of H 2 O 2 in distilled water for the same plasma operation conditions suggesting that the scavenging of OH radicals at the plasma-gel interface significantly reduces the H 2 O 2 production.

60 APPLIED LIFE SCIENCES↗

Computer tools for systems engineering at LaRC

The Systems Engineering Office (SEO) has been established to provide life cycle systems engineering support to Langley research Center projects. over the last two years, the computing market has been reviewed for tools which could enhance the effectiveness and efficiency of activities directed towards this mission. A group of interrelated applications have been procured, or are under development including a requirements management tool, a system design and simulation tool, and project and engineering data base. This paper will review the current configuration of these tools and provide information on future milestones and directions.

Walters, J. Milam↗

ASEAN Technical Exchange Workshop for System Operators, Regulators, and Policymakers

This presentation provides an in-depth exploration of power system planning, cross-border electricity trading, and battery energy storage systems (BESS), offering actionable insights for system operators, regulators, and policymakers. The first section delves into power system planning and analysis, focusing on capacity expansion models and resource adequacy studies, including their role in optimizing system efficiency, managing emissions, and addressing system reliability risks. Key considerations, such as integration of transmission into generation planning and the forecasting versus optimization of customer distributed energy resources (DER) technologies, are explored. The session highlights critical trade-offs in spatial granularity and model runtimes, as well as the feasibility of aligning distribution investments with capacity expansion efforts. The second section examines cross-border electricity trading, with an emphasis on resource adequacy concepts such as reliability targets, loss of load expectation (LOLE), and planning reserve margins (PRM). Case studies on reserve market design and coordination across US regions provide insights into improving reserve deliverability and managing interregional power balance and congestion. This section also addresses market-to-market congestion management, including advanced strategies for high-voltage direct current (HVDC) optimization and ancillary service delivery. Finally, the presentation covers the rapid evolution of Battery Energy Storage Systems (BESS), highlighting their operational growth, regulatory frameworks, and use cases in grid flexibility, energy storage, and reliability. The discussion focuses on the benefits of BESS for system stability, resilience, and integration of renewable energy, offering insights into its role as a vital component in the transition toward a more sustainable and flexible grid. Key performance parameters, such as throughput, round-trip efficiency, and state of charge, are also examined.

25 ENERGY STORAGE↗

A high-current light-ion injector for tandem accelerators

A dual-source injector for tandem accelerators to produce negative ion currents of H, D, and He has been developed and built. The system consists of a central vacuum enclosure that accommodates two multicusp ion sources. Beam currents of several mA of H{sup -} and D{sup -} have been obtained by direct negative extraction of one of the multicusp ion sources. The yield for He{sup -} was optimized applying differentially pumped vacuum sections that support space compensation in the He{sup +} transport section a well as low neutralization loss of He{sup -} after charge exchange. In addition, an optimized extraction geometry and beam transport system enabled in excess of 10 mA He{sup +} within the low acceptance of the charge exchange canal. Early measurements yielded {approx}50 {mu}A for He{sup -} using Li as a charge exchange medium, but currents over 100 {mu}A are anticipated if Na would be used.

43 PARTICLE ACCELERATORS↗

The Safe Guards Analysis Toolbox for Non-Proliferation Modeling

As nuclear technology becomes more widely available outside of nuclear weapon armed nations, the importance of preventing the illicit development of nuclear weapons has increased dramatically. A system of nuclear safeguards prevents proliferation; stopping the diversion of nuclear material from civilian facilities for the construction of nuclear weapons. These safeguards function through a combination of accountancy measurements that confirm the locations and amounts of nuclear material, and physical security at every nuclear facility. Safeguards Analysis (SGA) is a computational tool-kit developed using the MATLAB Simulink software suite that simulates a system of nuclear safeguards. The code allows users to examine current safeguards systems for weaknesses and to pinpoint the best locations for improvement. Developed as a modular framework, SGA does not directly model material flows, and relies on an outside code for this information. Instead, it represents a series of safeguards measurements that represent the values inspectors would see. Furthermore, SGA is designed to be modular in design, allowing the user to construct as complex or simple a model as needed: simulating an entire fuel-cycle comprising multiple facilities to a single measurement. SGA's use of outside codes for its material flow information makes it applicable to any model available to the user, as opposed to previous work that applied only to a single scenario. This paper discusses the initial development of SGA and the testing of these modules. The tests described in this paper demonstrate that the different pieces of SGA currently work as intended. Future work on the toolbox will develop and test SGA against a more realistic and complicated scenario using the various tools available in SGA. SGA currently has the pieces to perform analysis on safeguards systems, but needs to be tested on large, multi-MBA, systems to ensure the code is capable of handling such large models, to see the effect large models have on calculation speed, and if further work is needed to improve code efficiency. (authors)

97 MATHEMATICS AND COMPUTING↗

SPRINT: Scheduling Planning Routing Intersatellite Network Tool

The Scheduling Planning Routing Intersatellite Network Tool (SPRINT) software system plans and schedules the operations (observations, inter-satellite crosslink communications, and ground communications) of Earth observation (EO) constellations of hundreds of resource-constrained small satellites to enable global, near real-time science. Historically, most CubeSats have flown radios only for direct-to-ground downlink of data; as a result, data availability is delayed by as long as it takes for the capturing satellite to pass over a ground station, typically hours. Current Planning and Scheduling (P&S) systems for constellations cannot handle data routing through a large, dynamic network topology, and all planning is handled on the ground without .the ability to autonomously prioritize important observations, or respond to unexpected changes in communication window or bandwidth. SPRINT directly handles both data routing for low latency bulk observation data downlink and replanning onboard to deal with dynamic priorities and fault response, maximizing the utility of downlinked data.

Kerri Cahoy↗

Thermally-Conductive and Mechanically-Robust Graphene Nanoplatelet Reinforced UO 2 Composite Nuclear Fuels

Low thermal transport behavior along the radial direction of nuclear fuel pellets and pellet-cladding mechanical interaction significantly impact fuel performance and the safety of current nuclear energy systems. Here we report a new strategy of advanced fuel design in which highly thermally-conductive and mechanically-robust graphene nanoplatelets are incorporated into UO 2 fuel matrix to improve fuel thermal-mechanical properties. The 2D geometry of the graphene nanoplatelets enables a unique lamellar structure upon fuel consolidation by spark plasma sintering. The thermal conductivity along the radial direction of the sintered fuel pellets at room temperature reaches 12.7 and 19.1 wm –1 K –1 at 1 wt.% and 5 wt.% loadings of the graphene nanoplatelets, respectively, representing at least 74% and 162% enhancements as compared to pure UO 2 fuel pellets. Indentation testing suggests great capability of the 2D graphene nanoplatelets to deflect and pin crack propagation, drastically improving the crack propagation resistance of fuel matrix. Here, the estimated indentation fracture toughness reaches 3.5 MPa·m 1/2 by 1 wt.% loading of graphene nano-platelets, representing a 150% improvement over 1.4 MPa·m 1/2 for pure UO 2 fuel pellets. Isothermal annealing of the composite fuel indicates that the graphene nano-platelet is able to retain its structure and properties against reaction with UO 2 matrix up to 1150 °C.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Issaquah Highlands Zero Energy Affordable Housing (WA) - YWCA

The YWCA Family Village at Issaquah, Net Zero Energy Approach Project provides a compelling model for how the nation can seriously respond to the critical need for affordable housing while advancing environmental standards and reducing economic inequities. Affordable housing developments for vulnerable members of the community and in today's workforce cannot overlook issues, such as climate impact, energy security and water conservation. This project's advanced building design was based on the goal of creating a 100 year building that could achieve net zero energy usage if funding had been available to support the final pieces of energy generation. The team worked closely with community stakeholders to ensure the baseline components of high quality and efficient building envelopes along with efficient systems were in place to set the stage for future incorporation of energy generating systems such as solar panels. As built, these 146 homes, large child care center and community services areas are proving the value of investing upfront for the benefit of future generations by reducing ongoing utility and maintenance costs with an eye toward environmental stewardship and community/resident education. The DOE award helped fund two critical energy conservation features for the YWCA Family Village at Issaquah campus: 1) super-insulated roof assembly with a continuous air barrier and 2) domestic hot water preheat system. The roof system at the YWCA Family Village at Issaquah project was built to include 6" of Polyiso rigid insulation (R-38) on top of the roof sheathing to provide a super-insulated roof in line with the other green features of the project. Placing the rigid insulation on top of the roof sheathing allows the building to have a continuous layer of insulation and provides a continuous air barrier. The domestic hot water preheat system includes flat panel arrays on roofs of the buildings that heat the water using solar power, which reduces the amount of heating needed from the gas-fired boilers. The flat-plate panels on the roof of the building heats the water using solar power. A heat exchanger transfers heat from water warmed by the panels to potable water for the units. The warmed potable water mixes with the tap water supply to create hot water for the buildings. This boost of water warmed by the solar panels reduces the heating costs for eh project by reducing the need to heat the water via gas-fired boilers. Both of these energy upgrades were chosen because they significantly improve the energy efficiency for the life of the building and are reducing monthly utility costs for both the residents and the owners. Since the owner is a not-for-profit dedicated to long-term ownership and serving households with very-low and low-incomes, the costs savings will ultimately benefit current and future residents as the dollars saved will either be realized directly by the resident or be invested in the project. Technically, the design of these systems is easily understood and the principles could be applied to other projects. The incremental costs depend largely on the existing market rate of the components-none of which are considered "cutting edge" so a market does currently exist.

14 SOLAR ENERGY↗

Eigenvalue-Based Micromagnetic Analysis of Switching in Spin-Torque-Driven Structures

We present an eigenvalue-based approach for studying the magnetization dynamics in magnetic nanostructures driven by spintronic excitations, such as spin-transfer torque and spin-orbit torque. The approach represents the system dynamics in terms of normal oscillation modes (eigenstates) with corresponding complex eigenfrequencies. The dynamics is driven by a small number of active eigenstates and often considering just a single eigenstate is sufficient. We develop a perturbation theory that provides semianalytical dynamic solutions by using eigenstates for the case in the absence of damping and spintronic excitations as a basis. The approach provides useful insights into dynamics in such systems and allows solving several difficulties in their modeling, such as extracting the switching current in magnetic random-access memories and understanding switching mechanisms. We show that the presented approach directly predicts the critical switching current, i.e., switching current for an infinite time. The approach also provides solutions for the switching dynamics allowing the switching current to be obtained for a finite switching time, provided that the system symmetry is broken, e.g., by tilting the polarizer, so that switching by a finite pulse is possible.

42 ENGINEERING↗

Programming distributed memory architectures using Kali

Programming nonshared memory systems is more difficult than programming shared memory systems, in part because of the relatively low level of current programming environments for such machines. A new programming environment is presented, Kali, which provides a global name space and allows direct access to remote data values. In order to retain efficiency, Kali provides a system on annotations, allowing the user to control those aspects of the program critical to performance, such as data distribution and load balancing. The primitives and constructs provided by the language is described, and some of the issues raised in translating a Kali program for execution on distributed memory systems are also discussed.

Mehrotra, Piyush↗

Ship navigation using Navstar GPS - An application study

Ocean current measurement applications in physical oceanography require knowledge of inertial ship velocity to a precision of 1-2 cm/sec over a typical five minute averaging interval. The navigation accuracy must be commensurate with data precision obtainable from ship borne acoustic profilers used in sensing ocean currents. The Navstar Global Positioning System is viewed as a step in user technological simplification, extension in coverage availability, and enhancement in performance accuracy as well as reliability over the existing systems, namely, Loran-C, Transit, and Omega. Error analyses have shown the possibility of attaining the 1-2 cm/sec accuracy during active GPS coverage at a data rate of four position fixes per minute under varying sea-states. This paper is intended to present results of data validation exercises leading to design of an experiment at sea for deployment of both a GPS y-set and a direct Doppler measurement system as the autonomous navigation system used in conjunction with an acoustic Doppler as the sensor for ocean current measurement.

Mohan, S. N.↗

Distinctive features of structural evolution and thermodynamic response in wide-bandgap semiconductors driven by intense electronic excitation

Radiation-tolerant material selection requires balancing lattice rigidity, defect dynamics, and electronic stability, as shown by covalent SiC outperforming ionic Ga 2 O 3 and GaN under extreme environments. Responding to intense electronic excitation, irradiation-driven phase segregation (β → δ/κ in Ga 2 O 3 ) and core–shell track (disordered structure in GaN), accompanied by elemental redistribution, contrastingly, exceptional radiation tolerance manifested by comparatively minimal lattice distortion (0.17 % strain variation) was demonstrated in SiC. These differential responses are primarily attributed to two fundamental mechanisms: (i) thermodynamic driving forces governing defect migration and phase separation, and (ii) the synergistic effects of robust covalent bonding composition coupled with efficient defect recombination processes. Here, the stronger electron–phonon (e-ph) coupling in Ga 2 O 3 (4.34 × 1018 W m −3 K −1 ) and GaN (3.55 × 10 18 W m −3 K −1 ) enhances lattice energy deposition, triggering thermal spikes (ΔT ≫ T m ) and structural transition behaviors, whereas weaker e-ph coupling in SiC (3.69 × 10 18 W m −3 K −1 ), relatively high thermodynamic parameters and efficient energy dissipation suppress thermal spikes to maintaining lattice integrity. The photoresponse degradation driven by enhanced radiative recombination is dominant in N-doped SiC, while V-doped systems achieve defect-mediated photoconduction optimization characterized by abrupt current transitions, matching fluorescence yield evolutions, and directly connecting defect engineering to optoelectronic performance.

Intense electronic excitation↗

A prospect for computing in porous materials research: Very large fluid flow simulations

Properties of porous materials, abundant both in nature and industry, have broad influences on societies via, e.g. oil recovery, erosion, and propagation of pollutants. The internal structure of many porous materials involves multiple scales which hinders research on the relation between structure and transport properties: typically laboratory experiments cannot distinguish contributions from individual scales while computer simulations cannot capture multiple scales due to limited capabilities. Thus the question arises how large domain sizes can in fact be simulated with modern computers. This question is here addressed using a realistic test case; it is demonstrated that current computing capabilities allow the direct pore-scale simulation of fluid flow in porous materials using system sizes far beyond what has been previously reported. The achieved system sizes allow the closing of some particular scale gaps in, e.g. soil and petroleum rock research. Specifically, a full steady-state fluid flow simulation in a porous material, represented with an unprecedented resolution for the given sample size, is reported: the simulation is executed on a CPU-based supercomputer and the 3D geometry involves 16,3843 lattice cells (around 590 billion of them are pore sites). Using half of this sample in a benchmark simulation on a GPU-based system, a sustained computational performance of 1.77 PFLOPS is observed. These advances expose new opportunities in porous materials research. The implementation techniques here utilized are standard except for the tailored high-performance data layouts as well as the indirect addressing scheme with a low memory overhead and the truly asynchronous data communication scheme in the case of CPU and GPU code versions, respectively.

Computer Science↗

Analysis of Vector Particle-In-Cell (VPIC) memory usage optimizations on cutting-edge computer architectures

Vector Particle-In-Cell (VPIC) is one of the fastest plasma simulation codes in the world, with particle numbers ranging from one trillion on the first petascale system, Roadrunner, to ten trillion particles on the more recent Blue Waters supercomputer. As supercomputers continue to grow rapidly in size, so too does the gap between computing capability and memory capability. Current memory systems limit VPIC simulations greatly as the maximum number of particles that can be simulated directly depends on the available memory. In this study, we present a suite of VPIC memory optimizations (i.e., particle weight, half-precision, and fixed-point optimizations) that enable a significant increase in the number of particles in VPIC simulations. Here, we assess the optimizations’ impact on memory and runtime performance for a suite of cutting-edge computer architectures such has the NVIDIA V100 GPU, the IBM Power9, and the Fujitsu A64FX architectures. Our optimizations enable a 31.25% reduction in memory usage and up to 40% increase in the number of particles. This paper extends our work on developing particle storage format optimizations Tan et al.

97 MATHEMATICS AND COMPUTING↗

Laser ion source: A direct plasma injection scheme for two-beam type interdigital-H radio frequency quadrupole linac

We developed a laser ion source using a direct plasma injection scheme (DPIS) as an injection system for a two-beam type radio frequency quadrupole (RFQ) linac with an interdigital-H (IH) type cavity. The laser ion source in the DPIS is directly connected to the RFQ cavity without the low energy beam transport system. We achieved a high current C{sup 2+} beam above 60 mA per beam channel from the ion source. The beam will be injected to the two-beam type IH-RFQ linac, and the linac will generate a beam current of approximately 44 mA per beam channel.

43 PARTICLE ACCELERATORS↗

Secondary particle production from laser accelerated beams

3-MeV protons and fusion neutrons are generated by focused radiation of the 3-TW Prague Asterix Laser System (PALS). 30-mA current of 3-MeV protons is detected behind the target in the forward direction when a hydrogenated silicon foil is used. The co-occurrence of bursts in the emission of ions and fusion neutrons from CD{sub 2} plasma is observed. The energy of produced deuteron bursts is high enough to drive deuterium fusion in CD{sub 2} catcher targets.

43 PARTICLE ACCELERATORS↗