Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Electronic and optical properties of crystalline nitrogen versus black phosphorus: A comparative first-principles study

We report crystalline black nitrogen (BN) is an allotrope of nitrogen with the black phosphorus (BP) structure recently synthesized at high pressure by two independent research groups. Here, we present a systematic study of the electronic and optical properties of BN focusing on its comparison with BP. To this end, we use the state-of-the-art quasiparticle self-consistent GW approach with vertex corrections in both the electronic and optical channels. Despite many similarities, the properties of BN are found to be considerably different. Unlike BP, BN exhibits a larger optical gap (2.5 vs 0.26 eV), making BN transparent in the visible spectral region with a highly anisotropic optical response. This difference can be primarily attributed to a considerably reduced dielectric screening in BN, leading to enhancement of the effective Coulomb interaction. Despite relatively strong Coulomb interaction, exciton formation is largely suppressed in both materials. Our analysis of the elastic properties shows exceptionally high stiffness of BN, comparable to that of diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of Elevated Temperature Tensile Properties and Fatigue Behavior of Two Variants of a Woven SiC/SiC Composite

Tensile properties (elastic modulus, proportional limit strength, in-plane tensile strength, and strain at failure) of two variants of a woven SiC/SiC composite, manufactured during two separate time periods (9/99 and 1/01), were determined at 1038 and 1204 C by conducting tensile tests on specimens machined from plates. Continuous cycling fatigue tests (R = 0.05) and 20 cpm) were also conducted at the same two temperatures on specimens from both composites. In this study, average tensile properties, 95% confidence intervals associated with the tensile properties, and geometric mean fatigue lives of both composite materials are compared. The observed similarities and differences in the tensile properties are highlighted and an attempt is made to understand the relationship, if any, between the tensile properties and the fatigue behaviors of the two woven composites.

Kalluri, Sreeramesh↗

Mechanism of formation of wiggly compaction bands in porous sandstone: 2. Numerical simulation using discrete element method

Wiggly compaction bands in porous aeolian s andstone vary from chevron shape to wavy shape to nearly straight. In some outcrops these variations occur along a single band. Here, a bonded close-packed discrete element model is used to investigate what mechanical properties control the formation of wiggly compaction bands (CBs). To simulate the volumetric yielding failure of porous sandstone, a discrete element shrinks when the force state of one of its bonds reaches the yielding cap defined by the failure force and the aspect ratio (k) of the yielding ellipse. A Matlab code “MatDEM 3D ” has been developed on the basis of this enhanced discrete element method. Mechanical parameters of elements are chosen according to the elastic properties and the strengths of porous sandstone. In numerical simulations, the failure angle between the band segment and maximum principle stress decreases from 90° to approximately 45° as k increases from 0.5 to 2, and compaction bands vary from straight to chevron shape. With increasing strain, subsequent compaction occurs inside or beside compacted elements, which leads to further compaction and thickening of bands. The simulations indicate that a greater yielding stress promotes chevron CBs, and a greater cement strength promotes straight CBs. Combined with the microscopic analysis introduced in the companion paper, we conclude that the shape of wiggly CBs is controlled by the mechanical properties of sandstone, including the aspect ratio of the yielding ellipse, the cri tical yielding stress, and the cement strength, w hich are d etermined primarily by petrophysical attributes, e.g., grain sorting, porosity, and cementation.

58 GEOSCIENCES↗

Describing the Diverse Geometries of Gold from Nanoclusters to Bulk—A First-Principles-Based Hybrid Bond-Order Potential

Molecular dynamics simulations using empirical force fields (EFFs) are crucial for gaining fundamental insights into atomic structure and long time scale dynamics of Au nanoclusters with far-reaching applications in energy and devices. This approach is thwarted by the failure of currently available EFFs in describing the size-dependent dimensionality and diverse geometries exhibited by Au clusters (e.g., planar structures, hollow cages, tubes, pyramids, space-filled structures). Here, we mitigate this issue by introducing a new hybrid bond-order potential (HyBOP), which accounts for (a) short-range interactions via Tersoff-type BOP terms that accurately treat bond directionality and (b) long-range dispersion effects by a scaled Lennard–Jones term whose contribution depends on the local atomic density. We optimized the independent parameters for our HyBOP using a global optimization scheme driven by genetic algorithms. Moreover, to ensure good transferability of these parameters across different length scales, we used an extensive training data set that encompasses structural and energetic properties of 1000 13-atom Au clusters, surface energies, as well as bulk polymorphs, obtained from density functional theory (DFT) calculations. Our newly developed HyBOP has been found to accurately describe (a) global minimum energy configurations at different cluster sizes as well as order of stability of various cluster configurations at any size, (b) critical size of transition from planar to globular clusters, (c) evolution of structural motifs with cluster size, and (c) thermodynamics, structure, elastic properties, and energetic ordering of bulk condensed phases as well as surfaces, in excellent agreement with DFT calculations and spectroscopic experiments. This makes our newly developed HyBOP a valuable, computationally robust but inexpensive tool for investigating a wide range of materials phenomena occurring in Au at the atomistic level.

36 MATERIALS SCIENCE↗

Filament Wound Composite Analysis Using the NASA Multiscale Analysis Tool (NASMAT) and Finite Element Analysis

Fiber reinforced composite materials, owing to their tailorable thermomechanical and functional properties, allow one to produce a structure that is stronger, stiffer, and lighter than its metal counterpart while performing the same function, yielding a more efficient structure. This not only allows for the improvement of current technologies like aircraft structures, but also enables new technologies like gaseous hydrogen storage for mobility applications, which are otherwise impractical when manufactured using traditional metals due to weight and space restrictions or material embrittlement. However, the use of composites imposes greater design and manufacturing challenges on an engineer, since they are heterogenous, having a distinct structure across multiple length scale, behave generally anisotropically at the structural level and require complex manufacturing and processing methods. Capturing this complex behavior requires detailed numerical simulations, including the modeling of microstructural features like undulations, voids, and fiber alignment. In this paper, multiple repeating unit cells (RUCs), representing filament wound composites, are developed (via a script provided in the Appendix) and analyzed. The refinement of these RUCs is varied, and the analyses are performed using both the Abaqus finite element software and the NASA Multiscale Analysis Tool (NASMAT). A study is undertaken to compare the predicted effective elastic properties of the wound RUC to a laminate representation of the wound RUC, which neglects the undulations. Additionally, two different sets of periodic boundary conditions (PBCs) have been examined. One approximates the real boundary conditions using a standard approach and the other represents the PBCs exactly through the use of an offset. Lastly, a comparison of the local elastic stress fields is made among the models and approaches. Since wound structures are often approximated as laminated structures, it is important to understand the degree to which this assumption is valid, namely by first comparing the elastic constants and local elastic fields. This will provide, on the one hand, information concerning the bulk mechanical behavior and, on the other hand, insights concerning local load distributions and likely damage initiation sites.

Composites↗

Crystal structure and dynamical properties of a new tellurite: AgTlTeO{sub 3}

The structure of a newly synthesized AgTlTeO{sub 3} crystalline compound has been solved from single crystal X-ray diffraction data and refined to a final reliability factor R1 = 0.037. It was found having an orthorhombic Iba2 space group symmetry with unit cell parameters a = 14.708(7) A, b = 10.745(6) A, c = 5.166(3) A, Z = 8. Its lattice is divided into separated AgTlTeO{sub 3} sheets parallel to [0 1 0] which are formed by TeO{sub 3} pyramids, TlO{sub 4} disphenoids and AgO{sub 6} octahedra sharing either corners or edges. At the same time, from the crystal chemistry point of view, it can be classified as a typical island-type compound made up from molecular-like [TeO{sub 3}]{sup 2-} ortho-anions weakly connected with Ag{sup +} and Tl{sup +} cations. The vibrational spectra and their interpretations complemented by the calculated elastic properties confirm this classification. The model-estimated piezoelectric constants allow characterizing AgTlTeO{sub 3} as a strong pyroelectric structure.

36 MATERIALS SCIENCE↗

Thermodynamic and mechanical stabilities of α- and β-Ta{sub 4}AlC{sub 3} via first-principles investigations

Recently, it has been predicted that Ta{sub 4}AlC{sub 3} is likely to exhibit an (α–β) polymorphic transformation at temperatures above 1873 K. However, recent X-ray diffraction and transmission electron microscopy experiments suggest on the other hand that the α phase remains stable up to temperatures close to the limit of experimental capabilities and no transition has yet been observed. While the matter has already been settled experimentally, in this work, we re-investigate the phase stability problem in Ta{sub 4}AlC{sub 3} by using first-principles methods. The study was carried out by considering both thermodynamic and mechanical stabilities of the Ta{sub 4}AlC{sub 3} polymorphs. Particularly, finite-temperature Gibbs free energies and elastic properties of the polymorphs were calculated using density functional theory. Calculation results reveal that the α phase continue to be stable even at temperatures exceeding 1875 K, which is in agreement with experimental results reported in literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structures of (Mg1;#8722;x,Fex)SiO[subscript 3] postperovskite at high pressures

X-ray diffraction experiments on postperovskite (ppv) with compositions (Mg{sub 0.9}Fe{sub 0.1})SiO{sub 3} and (Mg{sub 0.6}Fe{sub 0.4})SiO{sub 3} at Earth core-mantle boundary pressures reveal different crystal structures. The former adopts the CaIrO{sub 3}-type structure with space group Cmcm, whereas the latter crystallizes in a structure with the Pmcm (Pmma) space group. The latter has a significantly higher density ({rho} = 6.119(1) g/cm{sup 3}) than the former ({rho} = 5.694(8) g/cm{sup 3}) due to both the larger amount of iron and the smaller ionic radius of Fe{sup 2+} as a result of an electronic spin transition observed by X-ray emission spectroscopy (XES). The smaller ionic radius for low-spin compared to high-spin Fe{sup 2+} also leads to an ordered cation distribution in the M1 and M2 crystallographic sites of the higher density ppv structure. Rietveld structure refinement indicates that approximately 70% of the total Fe{sup 2+} in that phase occupies the M2 site. XES results indicate a loss of 70% of the unpaired electronic spins consistent with a low spin M2 site and high spin M1 site. First-principles calculations of the magnetic ordering confirm that Pmcm with a two-site model is energetically more favorable at high pressure, and predict that the ordered structure is anisotropic in its electrical and elastic properties. These results suggest that interpretations of seismic structure in the deep mantle need to treat a broader range of mineral structures than previously considered.

36 MATERIALS SCIENCE↗

Low Cost Fabrication of Silicon Carbide Based Ceramics and Fiber Reinforced Composites

A low cost processing technique called reaction forming for the fabrication of near-net and complex shaped components of silicon carbide based ceramics and composites is presented. This process consists of the production of a microporous carbon preform and subsequent infiltration with liquid silicon or silicon-refractory metal alloys. The microporous preforms are made by the pyrolysis of a polymerized resin mixture with very good control of pore volume and pore size thereby yielding materials with tailorable microstructure and composition. Mechanical properties (elastic modulus, flexural strength, and fracture toughness) of reaction-formed silicon carbide ceramics are presented. This processing approach is suitable for various kinds of reinforcements such as whiskers, particulates, fibers (tows, weaves, and filaments), and 3-D architectures. This approach has also been used to fabricate continuous silicon carbide fiber reinforced ceramic composites (CFCC's) with silicon carbide based matrices. Strong and tough composites with tailorable matrix microstructure and composition have been obtained. Microstructure and thermomechanical properties of a silicon carbide (SCS-6) fiber reinforced reaction-formed silicon carbide matrix composites are discussed.

Singh, M.↗

Differences in elasticity of vinculin-deficient F9 cells measured by magnetometry and atomic force microscopy

We have investigated a mouse F9 embryonic carcinoma cell line, in which both vinculin genes were inactivated by homologous recombination, that exhibits defective adhesion and spreading [Coll et al. (1995) Proc. Natl. Acad. Sci. USA 92, 9161-9165]. Using a magnetometer and RGD-coated magnetic microbeads, we measured the local effect of loss and replacement of vinculin on mechanical force transfer across integrins. Vinculin-deficient F9Vin(-/-) cells showed a 21% difference in relative stiffness compared to wild-type cells. This was restored to near wild-type levels after transfection and constitutive expression of increasing amounts of vinculin into F9Vin(-/-) cells. In contrast, the transfection of vinculin constructs deficient in amino acids 1-288 (containing the talin- and alpha-actinin-binding site) or substituting tyrosine for phenylalanine (phosphorylation site, amino acid 822) in F9Vin(-/-) cells resulted in partial restoration of stiffness. Using atomic force microscopy to map the relative elasticity of entire F9 cells by 128 x 128 (n = 16,384) force scans, we observed a correlation with magnetometer measurements. These findings suggest that vinculin may promote cell adhesions and spreading by stabilizing focal adhesions and transferring mechanical stresses that drive cytoskeletal remodeling, thereby affecting the elastic properties of the cell.

Non-NASA Center↗

Anisotropic thermal transport property of defect-free GaN

Non-equilibrium molecular dynamics (MD) simulation is performed to calculate the thermal conductivity of defect-free GaN along three high-symmetry directions. It is found that the thermal conductivity along [001] direction is about 25% higher than that along [100] or [120] direction. The calculated phonon dispersion relation and iso-energy surface from lattice dynamics show that the difference of the sound speeds among the three high-symmetry directions is quite small for the same mode. However, the variation of phonon irradiation with direction is qualitatively consistent with that of the calculated thermal conductivity. Our results indicate that the anisotropic thermal conductivity may partly result from the phonons in the low-symmetry region of the first Brillouin zone due to phonon focus effects, even though the elastic properties along the three high-symmetry directions are nearly isotropic. Thus, the phonon irradiation is able to better describe the property of thermal conductivity as compared to the commonly used phonon dispersion relation. The present investigations uncover the physical origin of the anisotropic thermal conductivity in defect-free GaN, which would provide an important guide for optimizing the thermal management of GaN-based device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A charge transfer complex nematic liquid crystalline gel with high electrical conductivity

We describe the rheological, dielectric and elastic properties of a nematic liquid crystal gel created using an anthrylidene derivative of arjunolic acid, a chiral triterpenoid, obtained from the extracts of the wood of Terminalia arjuna. In this novel gel, having the electron-donor and acceptor components as minority constituents, the gelation and strengthening of charge-transfer complex (CTC) formation are seen to be occurring concomitantly. In addition to being mechanically strong with a large storage modulus, the gel with the maximized CTC exhibits Frank bend elastic constant values that approach nanonewton levels. The highlight of the study is the observation of 4–5 orders of magnitude increase in electrical conductivity for this gel, a value that is higher than even in the CT complexes of 2-d ordered columnar structures. A further important advantage of the present system over the columnar complex is that the high conductivity is seen for ac probing also, and owing to the nematic nature can be switched between its anisotropic limits. Some of these features are ascribed to a specific molecular packing architecture, which reduces the trapping of the charge carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelastic properties of tungsten at simultaneous high pressure and temperature

In this work, the compressional ( P ) and shear wave velocities ( S ) and unit cell volumes (densities) of polycrystalline tungsten (W) have been measured simultaneously up to 10.5 GPa and 1073 K using ultrasonic interferometry in conjunction with x-ray diffraction and x-radiography techniques. Thermoelastic properties of W were derived using different methods. We obtained the isothermal bulk modulus K T 0 = 310.3(1.5) GPa, its pressure derivative K ' T 0 = 4.4(3), its temperature derivative at constant pressure ( ∂ K T / ∂ T ) P = – 0.0138 ( 1 ) GPa K – 1 and at constant volume ( ∂ K T / ∂ T ) V = – 0.0050 GPa K – 1 , the thermal expansion α ( 0, T ) = 1.02(27) × 10 –5 + 7.39(3.2) × 10 –9 T (K –1 ), as well as the pressure derivative of thermal expansion ( ∂ α / ∂ P ) T = – 1.44 ( 1 ) × 10 – 7 K – 1 GP a – 1 based on the high-temperature Birch–Murnaghan equation of state (EOS), the Vinet EOS, and thermal pressure approach. Finite strain analysis allowed us to derive the elastic properties and their pressure/temperature derivatives independent of the choice of pressure scale. A least-squares fitting yielded K S 0 = 314.5(2.5) GPa, K S 0 ' = 4.45(9), (∂ K S /∂ T ) P = – 0.0076(6) GPa K –1 , G 0 = 162.4(9) GPa, G 0 ' = 1.8(1), (∂ G /∂ T ) P = – 0.0175(9) GPa K –1 , and α 298 K = 1.23 × 10 – 5 K – 1 . Fitting current data to the Mie–Grüneisen–Debye EOS with derived θ 0 = 383.4 K yielded γ 0 = 1.81 ( 6 ) and q = 0.3 . The thermoelastic parameters obtained from various approaches are consistent with one another and comparable with previous results within uncertainties. Our current study provides a complete and self-consistent dataset for the thermoelastic properties of tungsten at high P – T conditions, which is important to improve the theoretical modeling of these materials under dynamic conditions.

36 MATERIALS SCIENCE↗

Realization of an Ideal Cairo Tessellation in Nickel Diazenide NiN 2 : High-Pressure Route to Pentagonal 2D Materials

Most of the studied two-dimensional (2D) materials are based on highly symmetric hexagonal structural motifs. In contrast, lower-symmetry structures may have exciting anisotropic properties leading to various applications in nanoelectronics. In this work we report the synthesis of nickel diazenide NiN 2 which possesses atomic-thick layers comprised of Ni 2 N 3 pentagons forming Cairo-type tessellation. The layers of NiN 2 are weakly bonded with the calculated exfoliation energy of 0.72 J/m 2 , which is just slightly larger than that of graphene. The compound crystallizes in the space group of the ideal Cairo tiling (P4/mbm) and possesses significant anisotropy of elastic properties. The single-layer NiN 2 is a direct-band-gap semiconductor, while the bulk material is metallic. Furthermore, this indicates the promise of NiN 2 to be a precursor of a pentagonal 2D material with a tunable direct band gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annular spherically focused ring transducers for improved single-beam acoustical tweezers

The use of ultrasonic transducers with a central hollow is suggested for improved single-beam acoustical tweezers applications. Within the framework of the Fresnel-Kirchhoff parabolic approximation, a closed-form partial-wave series expansion (PWSE) for the incident velocity potential (or pressure) field is derived for an annular spherically focused ring (asfr) with uniform vibration across its surface in spherical coordinates. The Rayleigh-Sommerfeld diffraction integral and the addition theorems for the Legendre and spherical wave functions are used to obtain the PWSE assuming a weakly focused beam (with a focusing angle α ≤ 20°). The PWSE allows evaluating the incident field from the finite asfr in 3D. Moreover, the obtained solution allows computing efficiently the acoustic scattering and radiation force on a sphere centered on the beam's axis of wave propagation. The analytical solution is valid for wavelengths largely exceeding the radius of the asfr and when the viscosity of the surrounding fluid can be neglected. Numerical predictions for the beam-forming, scattering, and axial time-averaged radiation force are performed with particular emphasis on the asfr thickness, the axial distance separating the sphere from the center of the transducer, the (non-dimensional) size of the transducer, as well as the sphere's elastic properties without restriction to the long- (i.e., Rayleigh) or the short-wavelength (i.e., ray acoustics) regimes. Potential applications of the present solution are in beam-forming design, particle tweezing, and manipulation due to negative forces using ultrasonic asfr transducers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elastic full-waveform inversion and parameterization analysis applied to walk-away vertical seismic profile data for unconventional (heavy oil) reservoir characterization

We report seismic full-waveform inversion (FWI) methods hold strong potential to recover multiple subsurface elastic properties for hydrocarbon reservoir characterization. Simultaneously updating multiple physical parameters introduces the problem of interparameter tradeoff, arising from the covariance between different physical parameters, which increases nonlinearity and uncertainty of multiparameter FWI. The coupling effects of different physical parameters are significantly influenced by model parameterization and acquisition arrangement. An appropriate choice of model parameterization is critical to successful field data applications of multiparameter FWI. The objective of this paper is to examine the performance of various model parameterizations in isotropic-elastic FWI with walk-away vertical seismic profile (W-VSP) dataset for unconventional heavy oil reservoir characterization. Six model parameterizations are considered: velocity-density (α, β and ρ'), modulus-density (κ, μ and ρ), Lamé-density (λ, μ' and ρ'''), impedance-density (IP, IS and ρ''), velocity-impedance-I (α', β' and I' P ), and velocity-impedance-II (α'', β'' and I'S). We begin analyzing the interparameter tradeoff by making use of scattering radiation patterns, which is a common strategy for qualitative parameter resolution analysis. In this paper, we discuss the advantages and limitations of the scattering radiation patterns and recommend that interparameter tradeoffs be evaluated using interparameter contamination kernels, which provide quantitative, second-order measurements of the interparameter contaminations and can be constructed efficiently with an adjoint-state approach. Synthetic W-VSP isotropic-elastic FWI experiments in the time domain verify our conclusions about interparameter tradeoffs for various model parameterizations. Density profiles are most strongly influenced by the interparameter contaminations; depending on model parameterization, the inverted density profile can be over-estimated, under-estimated or spatially distorted. Among the six cases, only the velocity-density parameterization provides stable and informative density features not included in the starting model. Field data applications of multicomponent W-VSP isotropic-elastic FWI in the time domain were also carried out. Finally, the heavy oil reservoir target zone, characterized by low α-to-β ratios and low Poisson’s ratios, can be identified clearly with the inverted isotropic-elastic parameters.

58 GEOSCIENCES↗

New high-pressure polymorph of In{sub 2}S{sub 3} with defect Th{sub 3}P{sub 4}-type structure

The high pressure behavior of β-In{sub 2}S{sub 3} (I4{sub 1}/amd and Z=16) has been studied by in situ synchrotron radiation X-ray diffraction combined with diamond anvil cell up to 71.7 GPa. Three pressure-induced phase transitions are evidenced at ∼6.6 GPa, ∼11.1 GPa at room temperature and 35.6 GPa after the high-temperature annealing using a portable laser heating system. The new polymorph of In{sub 2}S{sub 3} at 35.6 GPa is assigned to the denser cubic defect Th{sub 3}P{sub 4} structure (I4¯3d and Z=5.333), whose unit-cell parameters are a=7.557(1) Å and V=431.6(2) Å{sup 3}. The Th{sub 3}P{sub 4}-type phase can be stable at least up to 71.7 GPa and cannot be preserved at ambient pressure. The pressure–volume relationship is well described by the second-order Birch–Murnaghan Equation of State, which yields B{sub 0}=63(3) GPa and B{sub 0}′=4 (fixed) for the β-In{sub 2}S{sub 3} phase and B{sub 0}=87(3) GPa and B{sub 0}′=4 (fixed) for the defect Th{sub 3}P{sub 4}-type phase respectively. - Graphical abstract: The structure and Rietveld refinement of new polymorph the defect Th{sub 3}P{sub 4}-type In{sub 2}S{sub 3}. This structure was observed at 35.6 GPa after laser heating by X-ray diffraction. Display Omitted - Highlights: Three pressure-induced phase transitions of β-In{sub 2}S{sub 3} were observed. β-In{sub 2}S{sub 3} was stable up to 6.6 GPa. The defect Th{sub 3}P{sub 4}-type In{sub 2}S{sub 3} was identified at 35.6 GPa after laser heating and was stable up to 71.7 GPa. Elastic properties of β-In{sub 2}S{sub 3} and Th{sub 3}P{sub 4}-type In{sub 2}S{sub 3} are well presented by Birch–Murnaghan EoS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A new interatomic potential for mixed Mg-Al-Ga-In spinels

While density functional theory (DFT) has become the de facto approach for accurate simulation of materials at the atomic scale, there are many aspects of materials that are simply out of reach of DFT methods. In particular, finite temperature properties such as diffusivities, the structure and properties of grain boundaries and interfaces, and the study of defect properties in complex alloys are computationally challenging for DFT methods. Recently, a new class of spinels in which three cations order over two sublattices was discovered. In order to predict the properties of these types of structures, classical potentials are a must. Here, in this work, we derive a new classical potential for Mg-bearing spinels in which the B cations are Al, Ga, and/or In. The potential does well in describing the DFT energetics of various spinel structures as a function of chemistry and inversion. In particular, it reproduces the thermodynamically favorable MgAlGaO 4 structure while correctly predicting that neither MgAlInO 4 nor MgGaInO 4 are stable. Further, it reproduces physical trends in elastic properties as compared against experiment.

36 MATERIALS SCIENCE↗